some nitrogen-containing fertilizers are significant sources of soil acidity in cultivated soils.T/F

Answers

Answer 1

True. Some nitrogen-containing fertilizers can be significant sources of soil acidity in cultivated soils.

When these fertilizers break down, they release hydrogen ions, which can lower the pH of the soil and increase its acidity. When these fertilizers are applied to the soil, they undergo a process called nitrification, which converts the nitrogen in the fertilizer into forms that plants can use.

During this process, nitrate ions are produced, which are negatively charged and can displace positively charged ions, such as calcium, from the soil particles. As a result, calcium and other positively charged ions may be leached from the soil, leading to soil acidity.

Additionally, the nitrification process produces hydrogen ions, which can also contribute to soil acidity. Over time, the repeated application of nitrogen-containing fertilizers can lead to a decrease in soil pH and a decline in soil fertility.

To mitigate the negative effects of nitrogen fertilizers on soil acidity, it is recommended to use these fertilizers judiciously and to monitor soil pH levels regularly. Liming, which involves the application of calcium carbonate or other alkaline materials, can also help to neutralize soil acidity.

To learn more about soil acidity, refer:-

https://brainly.com/question/28219848

#SPJ11

Answer 2

Some nitrogen-containing fertilizers are significant sources of soil acidity in cultivated soils. This occurs due to the chemical reactions that take place when nitrogen-based fertilizers are applied to the soil.

Step 1: Nitrogen-containing fertilizers, such as ammonium nitrate or urea, are applied to the soil.

Step 2: Once applied, the ammonium (NH4+) in these fertilizers is converted to nitrate (NO3-) through a process called nitrification. This process releases hydrogen ions (H+).

Step 3: The release of hydrogen ions increases the concentration of H+ in the soil, resulting in a drop in pH levels and, consequently, increased soil acidity.

Step 4: High soil acidity can negatively impact plant growth, nutrient availability, and soil structure, which may require corrective actions such as the addition of lime to restore the soil's pH balance.

In summary, nitrogen-containing fertilizers can be significant sources of soil acidity in cultivated soils due to the chemical reactions and release of hydrogen ions during the nitrification process.

To know more about nitrogen-based fertilizers:

https://brainly.com/question/7786110

#SPJ11


Related Questions

At physiological pH, the carboxylic acid group of an amino acid will be ________, while the amino group will be ________, yielding the zwitterion form.
deprotonated, protonated
protonated, protonated
deprotonated, deprotonated
protonated, deprotonated

Answers

At physiological pH, the carboxylic acid group of an amino acid will be deprotonated, while the amino group will be protonated, yielding the zwitterion form. Your answer: deprotonated, protonated.

At physiological pH, the carboxylic acid group of an amino acid will be deprotonated, while the amino group will be protonated, yielding the zwitterion form.

Amino acids are organic compounds that serve as the building blocks of proteins. They are essential to the structure and function of living organisms, including humans. Amino acids consist of a central carbon atom (alpha-carbon) that is bonded to an amino group (-NH2), a carboxyl group (-COOH), a hydrogen atom, and a variable side chain (R-group).

There are 20 different types of amino acids that are commonly found in proteins. Each type of amino acid has a unique side chain that determines its chemical properties, such as its polarity, charge, and size. The sequence and arrangement of amino acids in a protein determine its three-dimensional structure and its function in the body.

Visit here to learn more about amino acid brainly.com/question/31442968

#SPJ11

What is the mass of 0.0250 mol of P2O5A) 35.5 g B) 5676 g C) 0.0250 g D) 1.51 × 1022 g E) 3.55 g

Answers

The mass of 0.0250 mol of [tex]P_{2} O_{5}[/tex] is 3.55 g (option E).  The molar mass of [tex]P_{2} O_{5}[/tex] (diphosphorus pentoxide) can be calculated as follows:

Atomic mass of P = 30.97 g/mol

Atomic mass of O = 15.99 g/mol

Molar mass of [tex]P_{2} O_{5}[/tex] = (2 × atomic mass of P) + (5 × atomic mass of O)

= (2 × 30.97 g/mol) + (5 × 15.99 g/mol)

= 141.94 g/mol

The mass of 0.0250 mol of P2O5 can be calculated using the following formula:

mass = number of moles × molar mass

mass = 0.0250 mol × 141.94 g/mol

mass = 3.55 g

Diphosphorus pentoxide ([tex]P_{2} O_{5}[/tex]) is a white, powdery substance that is commonly used as a desiccant (drying agent) and as a reagent in chemical reactions. It is also used in the production of fertilizers, insecticides, and other chemicals.

The molar mass of [tex]P_{2} O_{5}[/tex] can be calculated by adding the atomic masses of two phosphorus atoms and five oxygen atoms. The atomic mass of phosphorus is 30.97 g/mol, while the atomic mass of oxygen is 15.99 g/mol. Therefore, the molar mass of [tex]P_{2} O_{5}[/tex] is:

2 x 30.97 g/mol + 5 x 15.99 g/mol = 62.00 g/mol + 79.95 g/mol = 141.94 g/mol

This means that one mole of [tex]P_{2} O_{5}[/tex] has a mass of 141.94 g. To find the mass of a given number of moles of [tex]P_{2} O_{5}[/tex] , you simply multiply the number of moles by the molar mass. For example, 0.0250 mol of [tex]P_{2} O_{5}[/tex] has a mass of:

0.0250 mol x 141.94 g/mol = 3.55 g

It is important to use proper units when working with molar masses and other chemical calculations. In this case, the mass is expressed in grams (g), and the molar mass is expressed in grams per mole (g/mol).

To know more about molar mass

brainly.com/question/22997914

#SPJ11

Question 1
The major constituent of the atmosphere today is:
a. Carbon monoxide
b. Nitrogen c. Oxygen
d. argon

Answers

The correct answer is (b) Nitrogen.

The Earth's atmosphere is made up of several different gases, including nitrogen, oxygen, argon, carbon dioxide, neon, helium, methane, and others. These gases are held in place by the Earth's gravity, and together they create the air that we breathe.

Nitrogen is the most abundant gas in the atmosphere, making up about 78% of its total volume. Nitrogen is a colorless, odorless, and mostly inert gas, meaning that it does not react with many other substances. It is essential for life on Earth, as it is a key component of amino acids, which are the building blocks of proteins.

Oxygen is the second most abundant gas in the atmosphere, making up about 21% of its total volume. Oxygen is also essential for life, as it is used by many organisms, including humans, to produce energy through respiration.

Argon is a noble gas that is present in the atmosphere in much smaller amounts, making up about 0.9% of its total volume. Argon is also mostly inert, and is used in various applications, such as welding and lighting.

Carbon monoxide, on the other hand, is a toxic gas that is produced by incomplete combustion of fuels. It is present in the atmosphere in much smaller amounts than nitrogen, oxygen, or argon, and can be harmful to humans and other organisms at high concentrations.

Visit to know more about Nitrogen:-

brainly.com/question/1380063

#SPJ11

Calculate the volume that a 0.323mol sample of a gas will occupy at 265K and a pressure of 143kPa.

Answers

To calculate the volume that a 0.323 mol sample of gas will occupy at 265K and a pressure of 143 kPa, we can use the ideal gas law equation PV = nRT the volume that a 0.323 mol sample of gas will occupy at 265 K and a pressure of 143 kPa is approximately 0.00491 m³.

What is  pressure ?

The SI unit of pressure is the pascal (Pa), which is defined as one newton of force per square meter of area. Other commonly used units of pressure include atmospheres (atm), pounds per square inch (psi), and kilopascals (kPa).

Pressure plays a fundamental role in many scientific and engineering disciplines, such as physics, chemistry, fluid mechanics, and materials science. It can be used to describe the behavior of gases, liquids, and solids under different conditions, and to understand and design a wide range of devices and systems, from hydraulic systems to airplanes to pressure vessels.

To know more about Pressure visit :

https://brainly.com/question/12971272

#SPJ1

What was the driving force for the loss water from the addition product if the aldol reaction?

Answers

The driving force for the loss of water in the aldol reaction is the formation of a more stable carbonyl compound through the creation of a new carbon-carbon bond.

An aldol reaction is a powerful tool for forming new carbon-carbon bonds in organic synthesis. The reaction involves the addition of an enolate ion, generated from a carbonyl compound such as an aldehyde or ketone, to the carbonyl group of another aldehyde or ketone.

This results in the formation of a β-hydroxy aldehyde or β-hydroxy ketone intermediate, which can undergo dehydration to yield an α,β-unsaturated aldehyde or ketone product.

Learn more about aldol reaction at

https://brainly.com/question/29857280

#SPJ4

How can we go from Epoxide to Alcohol?

Answers

The conversion of an epoxide to an alcohol can be achieved by using a strong nucleophile such as water or a hydroxide ion.


To convert an epoxide to an alcohol, you can follow these steps:
1. Choose a suitable nucleophile: For this conversion, you can use a water molecule ([tex]H_2O[/tex]) or another suitable nucleophile as the attacking species. Water is a common choice since it results in the formation of an alcohol.
2. Attack the epoxide: The nucleophile, in this case water, will attack one of the carbon atoms in the three-membered epoxide ring. This attack occurs because epoxides have a strained ring structure, making them highly reactive towards nucleophiles.
3. Ring-opening reaction: As the nucleophile attacks the epoxide carbon, the C-O bond in the epoxide ring breaks, resulting in the ring-opening reaction. This creates an intermediate with the nucleophile attached to the carbon atom.
4. Proton transfer: In the intermediate, there will be a negatively charged oxygen atom. To complete the formation of the alcohol, a proton ([tex]H+[/tex]) needs to be transferred to this oxygen atom. In the case of using water as the nucleophile, another water molecule can act as a proton donor, resulting in the formation of the alcohol and a hydroxide ion ([tex]OH-[/tex]).

To learn more about epoxide click here https://brainly.com/question/26718813

#SPJ11

A solution of 2M NaCl in water is separated from pure water by a semipermeable membrane. Which of the following is true? A solution of 2M NaCl in water is separated from pure water by a semipermeable membrane. Which of the following is true?
a)Nothing will happen because the system is at ÎG = 0.
B)The crossing of NaCl is an endergonic process.
C)Water will move from the 2M NaCl solution to the pure water compartment.
D)NaCl will migrate (diffuse) across the membrane until there is an equal concentration on both sides.

Answers

The correct answer is C)

Answer - Water will move from the 2M NaCl solution to the pure water compartment. This is because of the process of osmosis, where water moves from an area of high concentration (pure water) to an area of low concentration (2M NaCl solution) to reach equilibrium. The semipermeable membrane allows only water molecules to pass through, and not NaCl ions. Therefore, the concentration of water will increase on the side with pure water, while the concentration of NaCl will remain the same on the other side.

To learn more about Osmosis -

brainly.com/question/31028904

#SPJ11

1.10. All of the following are advantages of using precast concrete sections EXCEPT A. better quality control. B. faster curing. C. all-weather construction. D. greater economy.

Answers

The correct answer is D. All of the given options except for greater economy are advantages of using precast concrete sections.

Precast concrete sections provide better quality control, faster curing, and all-weather construction benefits. Precast concrete sections are manufactured in controlled environments, ensuring consistent quality. They are also cured in ideal conditions, allowing for faster curing times.

Precast concrete sections can be installed in any weather condition, which means that construction projects can continue even during inclement weather. Additionally, using precast concrete sections can save time and money, resulting in greater economy.

To know more about precast concrete, click here:-

https://brainly.com/question/23127906

#SPJ11

Help needed! I need it by Sunday. Please help.

Answers

There are 0.0456 moles of iron(II) chloride in the original solution. There are still 0.0456 moles of iron(II) chloride in the solution, but the molarity has decreased to 0.1824 M. The final molarity of the iron(II) chloride is 0.1824 M.

How is concentration determined?

The proportion of the solute that is dissolved in a solution is indicated by the solution's concentration. This formula may be used to determine a solution's concentration: Concentration is calculated as Volume of Solute multiplied by 100 and Volume of Solution (ml).

moles = concentration x volume (in liters)

The solution's volume must first be converted from millilitres to litres:

50.0 mL = 50.0/1000 L = 0.0500 L

Now we can calculate the moles of iron(II) chloride:

moles = 0.911 M x 0.0500 L = 0.0456 mol

concentration = moles / volume (in liters)

moles = 0.0456 mol (from part a)

volume = 0.250 L (after adding water)

concentration = 0.0456 mol / 0.250 L = 0.1824 M

To know more about molarity visit:-

https://brainly.com/question/8732513

#SPJ1

which ligand below causes the smallest crystal field splitting (assume that the metal cation, coordination number, and molecular shape are the same in all cases)? group of answer choices hydroxide ion dichromate ion en water iodide ion chloride ion g

Answers

The iodide ion (I-) causes the smallest crystal field splitting. This is because it is a weaker field ligand compared to hydroxide ion (OH-), dichromate ion (Cr2O7^2-), and chloride ion (Cl-). Weaker field ligands lead to smaller crystal field splitting values.

Crystal field theory (CFT) describes the breaking of orbital degeneracy in transition metal complexes due to the presence of ligands. CFT qualitatively describes the strength of the metal-ligand bonds. Based on the strength of the metal-ligand bonds, the energy of the system is altered. This may lead to a change in magnetic properties as well as color. This theory was developed by Hans Bethe and John Hasbrouck van Vleck.

In Crystal Field Theory, it is assumed that the ions are simple point charges (a simplification). When applied to alkali metal ions containing a symmetric sphere of charge, calculations of bond energies are generally quite successful. The approach taken uses classical potential energy equations that take into account the attractive and repulsive interactions between charged particles (that is, Coulomb's Law interactions).

Visit here to learn more about  Crystal Field Theory : https://brainly.com/question/29389010
#SPJ11

17. Kp for the reaction of SO2(g) with O2 to produce SO3(g) is 3 1024 . Calculate Kc for this equilibrium at 25ºC. (The relevant reaction is 2SO2(g) + O2(g) 2SO3(g).)
A) 3 x 10^ 24 B) 5 x 10^21 C) 2 x 10^20 D) 5 x 10^22 E) 7 x 10^25

Answers

The concentration of all gases can be assumed to be 1 M, so Kc will be equal to 1. Therefore, the Kc for this reaction at 25°C is 1.

What is concentration?

Concentration is the act of focusing on one specific task or activity while shutting out other distractions. It involves using mental effort and energy to attain a desired outcome or goal. Concentration can be used to enhance learning, memory, and creativity, as well as to improve performance in sports, work, or any other area of life. It involves being mindful of the present moment and focusing on the task at hand.

The Kp for this reaction is 3 x 1024. To calculate the Kc, we first need to determine the reaction quotient, Qc. Since the reaction is 2SO₂(g) + O2(g) → 2SO₃(g), we can calculate Qc as follows:
Qc = [SO3]² / [SO2]² [O2]
At equilibrium, the reaction quotient (Qc) will be equal to the equilibrium constant (Kc). Therefore, we can set these two values equal to one another and solve for Kc.
Kc = [SO3]² / [SO2]² [O2]
At 25°C, the concentration of all gases can be assumed to be 1 M, so Kc will be equal to 1. Therefore, the Kc for this reaction at 25°C is 1.

To learn more about concentration
https://brainly.com/question/26255204
#SPJ1

3Na + AlCl3 → 3NaCl + Al

A chemistry assignment has a student conduct a single replacement reaction by adding 7.5g of sodium metal to 20.0g of aluminum chloride.


How much aluminum in moles would precipitate out as a result of the reaction?

Answers

Answer:

Al = 0.109mol

Explanation:

First, we need to balance the chemical equation:

3Na + AlCl3 → 3NaCl + Al

From the balanced equation, we can see that 3 moles of Na reacts with 1 mole of AlCl3 to produce 1 mole of Al.

To find out how many moles of Al will precipitate out as a result of the reaction, we need to determine the limiting reactant. This can be done by comparing the amount of each reactant to their stoichiometric coefficients in the balanced equation.

The molar mass of Na is 22.99 g/mol, so 7.5 g of Na is equal to 7.5 g / 22.99 g/mol = 0.326 mol of Na.

The molar mass of AlCl3 is 133.34 g/mol, so 20.0 g of AlCl3 is equal to 20.0 g / 133.34 g/mol = 0.150 mol of AlCl3.

From the balanced equation, 3 moles of Na reacts with 1 mole of AlCl3. Therefore, the amount of AlCl3 needed to react with 0.326 mol of Na is:

0.326 mol Na × (1 mol AlCl3 / 3 mol Na) = 0.109 mol AlCl3

Since we have 0.150 mol of AlCl3, which is greater than 0.109 mol, AlCl3 is in excess and Na is the limiting reactant.

Therefore, the amount of Al produced is equal to the amount that can be produced by the reaction of 0.326 mol of Na, which is:

0.326 mol Na × (1 mol Al / 3 mol Na) = 0.109 mol Al

Therefore, 0.109 moles of aluminum will precipitate out as a result of the reaction.

Question 27 Marks: 1 An example of an anticoagulant rodenticide isChoose one answer. a. red squill b. cyanide gas c. warfarin d. malathion

Answers

An anticoagulant rodenticide is a type of poison used to control rodents such as rats and mice. It works by preventing the blood from clotting, leading to fatal internal bleeding. An anticoagulant rodenticide is warfarin

Warfarin is a common anticoagulant used in human medicine to prevent blood clots. In rodenticides, it is used in much higher doses to kill rodents. Other anticoagulant rodenticides include bromadiolone, difenacoum, and brodifacoum.

It is important to use these poisons carefully and follow all instructions to prevent accidental poisoning of non-target species such as pets and wildlife. It is also important to properly dispose of any unused poison to prevent it from contaminating the environment.

To learn more about rodenticide

https://brainly.com/question/25121848

#SPJ11

Obligatory water excretion volume in mL

Answers

Obligatory volume can vary depending on factors such as diet, exercise, and overall health, but typically ranges from 500-1000 mL per day.

The obligatory water excretion volume in mL refers to the minimum amount of water that the kidneys must excrete on a daily basis in order to remove waste and maintain electrolyte balance in the body. The amount of water an individual needs to excrete depends on their daily fluid intake, activity level, and health status. Generally, a healthy adult should aim to excrete a minimum of 1.5 liters of urine a day, which is equivalent to 500-1000 mL . If urine output is less than this, it could be a sign of dehydration, which can lead to serious health problems. It is important to monitor urine output and adjust fluid intake accordingly to ensure adequate hydration.

learn more about hydration Refer: https://brainly.com/question/15724859

#SPJ11

When comparing friction loss in water pipes, a larger Hazen-Williams C-factor value indicates the pipe is?
a) More durable
b) Able to withstand a higher pressure
c) Smoother inside
d) Rougher inside

Answers



The Hazen-Williams C-factor value is a measure of the smoothness inside a pipe. A higher C-factor indicates that the pipe has less friction loss, meaning that water can flow more easily and smoothly through it.

This does not necessarily indicate that the pipe is more durable or able to withstand higher pressure.
When comparing friction loss in water pipes, a larger Hazen-Williams C-factor value indicates the pipe is:

Hazen-Williams coefficient, abbreviated as C, also called Hazen-Williams friction coefficient, a dimensionless number, is used in the Hazen-Williams Equation. The lower the coefficient, the smoother the pipe is. The higher the coefficient, the less fluid flow is restricted

To know more about Measure  click here .

brainly.com/question/4725561

#SPJ11

Temperature is a measure of the internal bonding energy. True False

Answers

Answer:

Explanation:

True

Question 8
What is the primary reason the pH of a pool should stay less than 8?
a. causes skin irritation b. decreases the amount of active chlorine available
c. promotes growth of coli form
d. attacks concrete walls

Answers

The pH value of swimming pools should be kept below 8 to prevent from decreases the amount of active chlorine available. So option (b) is true.

A pH less than 7 is acidic, and a pH greater than 7 is basic. The pH is a measure of the relative amount of free hydrogen ions and hydroxide ions in water. The accuracy of swimming pool water is measured in NTU or Nephelometric Turbidity Units. A 0.5 NTU level is recommended. The goal is to keep the pH between 7 and 7.6. Anyone swimming in the pool is at risk of boils if the water has a pH higher than 8, while a pH lower than 7 can injure swimmers' eyes. If the pH is higher than 7.8, the water has become alkaline. When the water is too alkaline, it reduces the effectiveness of the chlorine. Therefore, the main cause of non-pooling pH is, to prevent from reduces the active chlorine present because at hight pH it's effect reduces.

For more information about pH value, visit :

https://brainly.com/question/14097392

#SPJ4

Question 50
The liquid form of chlorine used for emergency disinfection of small volumes of a. Calcium hypochlorite
b. Sodium hypochlorite
c. Bromium hypochlorite
d. Potassium hypochlorite

Answers

The liquid form of chlorine used for emergency disinfection of small volumes is b. Sodium hypochlorite.

It is a strong disinfectant and is effective against a wide range of microorganisms. Sodium hypochlorite (NaClO) is an active ingredient in many household bleach products. It is a strong oxidizer that can quickly and effectively disinfect water of harmful bacteria, viruses, and other microorganisms. Sodium hypochlorite is available in varying concentrations and is typically added to the water at a rate of 1-2 mg/L (parts per million). This rate of chlorine addition will usually kill most bacteria in the water within 30 minutes. It is important to note that sodium hypochlorite can cause skin and eye irritation, so it is important to follow the directions for proper use and handling of the product.

learn more about Sodium hypochlorite Refer: https://brainly.com/question/10423391

#SPJ11

If a solid crystal of KHP from the bottom of the solution was accidentally pipetted and went unnoticed throughout titrations, the Ksp value would be

Answers

If a solid crystal of KHP (potassium hydrogen phthalate) is accidentally pipetted and goes unnoticed throughout titrations, the Ksp value (solubility product constant) would be artificially higher than the true value.

In a titration experiment, the concentration of dissolved KHP is determined by titrating it with a strong base, such as NaOH.

If a solid crystal of KHP is accidentally pipetted, it will eventually dissolve, increasing the concentration of KHP in the solution.

This higher concentration will then require more titrant (NaOH) to reach the endpoint of the titration. As a result, the calculated Ksp value will be higher than the actual Ksp value of KHP, because it will be based on an artificially increased concentration.
In summary, the accidental inclusion of a solid KHP crystal during titration will lead to an overestimation of the Ksp value. To obtain accurate results, it is essential to ensure that no solid crystals are present in the solution before beginning the titration process.

For more information on solubility equilibrium (Ksp) kindly visit to

https://brainly.com/question/13032436

#SPJ11

Synthesis of Alkyne using acytelide ion T/F

Answers

True. Alkynes can be synthesized using acetylide ion, which is formed by deprotonating a terminal alkyne with a strong base.

The acetylide ion can then undergo nucleophilic substitution reactions to form a new alkyne molecule. This method is commonly used in organic chemistry for the synthesis of alkynes.In the first two reactions, the acetylide ion acts as a nucleophile and attacks the electrophilic carbon of the alkyl group, while in the third reaction, it acts as a nucleophile and attacks the electrophilic halide group. The product of the reaction is an alkyne which can be further reacted to yield a variety of substituted alkynes.

learn more about acetylide ion Refer: https://brainly.com/question/30516341

#SPJ11

23. it takes 500 j of work to compress quasi-statically 0.50 mol of an ideal gas to one-fifth its original volume. calculate the temperature of the gas, assuming it remains constant during the compression.

Answers

the temperature of the gas during the compression remains constant at approximately 294.5 K.the temperature of the gas after the compression is 909 K, assuming it remains constant during the compression.


We'll use the given terms "compress", "temperature", and "compression" in the solution.
To solve this problem, we will use the work formula for a quasi-static process:
W = n * R * T * ln(V2 / V1)
Where:
W = work done (500 J)
n = number of moles (0.50 mol)
R = gas constant (8.314 J/mol·K)
T = temperature (which we need to find)
V2 = final volume (1/5 * V1)
V1 = initial volume
Step 1: Rewrite the formula with given values and unknowns:
500 J = (0.50 mol) * (8.314 J/mol·K) * T * ln((1/5 * V1) / V1)
Step 2: Simplify the formula:
500 J = (4.157 J/K) * T * ln(1/5)
Step 3: Solve for temperature (T):
T = 500 J / [(4.157 J/K) * ln(1/5)]
T ≈ 294.5 K
So, the temperature of the gas during the compression remains constant at approximately 294.5 K.

Learn more about gas here

https://brainly.com/question/30030160

#SPJ11

Why can you only use molecular sieves instead of other drying agents in the alternate method of removing water (the one not used in the experiment)?

Answers

We use molecular sieves instead of other drying agents in the alternate method of removing water so that water may pass through the sieve leaving unwanted particles on top, also it can be recycled.

Unlike other drying agents molecular sieves can be recycled several times by heating them at an appropriate temperature. Molecular sieves belongs to the class of desiccants, commonly known as adsorbents. They are used for drying of  hydrocarbon. It is also described as the removal of dissolved water from gases and liquids composed of hydrogen and carbon . Molecular sieves finds its applications in refineries for removal of dissolved water.

To know more about molecular sieves here

https://brainly.com/question/29312346

#SPJ4

is 3NaCl a ..

molecule
compound
element
mixture

Answers

Answer:

compound

Explanation:

Standard fire hydrants should not be installed on water mains smaller than?
a) 4
b) 6
c) 8
d) 10

Answers

Standard fire hydrants should not be installed on water mains smaller than 6 inches in size.

Fire Hydrants and Branches:

1.     Gridironing of Public Water Mains: Whenever possible, gridironing of public water mains shall be planned so that not more than one fire hydrant will be installed on a six-inch (6″) diameter water main between intersecting mains, and not more than two (2) fire hydrants installed on an eight-inch (8″) diameter water main between intersecting mains.

2.     High Value Areas: In industrial, warehouse, institutional, shopping center, or other high value areas within or outside the principal business district, there shall be one or two (2) fire hydrants at each street intersection, depending upon the character of the area, with intermediate fire hydrants placed so that they are not over three hundred feet (300′) apart. In general, depending upon the area’s characteristics, the average area to be served by each fire hydrant shall be from eighty thousand (80,000) to ninety thousand (90,000) square feet.

3.     Residential Areas: In residential areas there shall be one fire hydrant installed at each street intersection with intermediate fire hydrants located so that said fire hydrants are spaced not over three hundred feet (300′) apart. In general, depending upon the area’s characteristics, the average area to be served by each fire hydrant shall not exceed one hundred ten thousand (110,000) square feet.

4.     Fire Hydrant Branches: Fire hydrant branches shall have a minimum diameter of six inches (6″). In all cases a valve shall be installed on each fire hydrant branch and in no case shall the valve be of smaller diameter than the fire hydrant branch. Branch valves shall be situated not less than eighteen inches (18″) or more than twenty-four inches (24″) from the branch feeder main.

To know more about Fire please click:-

https://brainly.com/question/28901632

#SPJ11

the united state environmental protection agency (epa) sets limits for the concentrations of hazardous chemicals that can be found in soil, or groundwater. suppose you are the defense attorney for a company charged with exceeding the epa limits on calcium perchlorate [ca(clo4)2] discharges into the local sewer system by 20 ppm. assume that the chemical analysis by the epa was performed by titrating the water with edta to determine the calcium content. determine three questions: would you want to ask the chemist when they were on the witness stand to try and have the charges dismissed against your client?

Answers

As a defense attorney representing a company charged with exceeding the EPA limits on calcium perchlorate discharges, you would want to ask the chemist specific questions to challenge the validity of the test results and potentially have the charges dismissed. Here are three possible questions:

1. What were the quality control measures taken during the EDTA titration process to ensure accuracy and precision of the results?
This question aims to determine if proper procedures were followed during the analysis. The chemist should have taken appropriate measures such as calibration of equipment, replicates, and use of standards to ensure accurate results. Any shortcomings in quality control could cast doubt on the reliability of the test results. 2. Was there any possibility of sample contamination or interference during the collection, transportation, storage, or analysis of the water samples? This question seeks to understand if any external factors may have influenced the test results. The chemist should explain how they ensured that the samples were not contaminated or affected by other substances. Any indication of possible contamination or interference could weaken the case against your client. 3. Can you explain how the EPA determined the specific limit of 20 ppm for calcium perchlorate in groundwater, and provide scientific evidence supporting this limit? By asking this question, you are challenging the basis for the EPA's established limit. The chemist should be able to explain the rationale behind setting the limit at 20 ppm, including any relevant studies or scientific data. If the chemist cannot provide a satisfactory explanation, it may cast doubt on the validity of the limit itself and weaken the case against your client.

For more information on  external factors   see:

https://brainly.com/question/30122182

#SPJ11

1.3. The purpose of a concrete slump test is to A. determine the plasticity of the mix. B. measure the consistency and workability of the mix. C. test the compression of the mix. D. define the compression strength of the mix.

Answers

The purpose of a concrete slump test is to: B. measure the consistency and workability of the mix.

The slump test is a simple and widely used test for measuring the consistency and workability of fresh concrete. It involves filling a standard cone-shaped mold with freshly mixed concrete and then lifting the mold to allow the concrete to slump or settle. The distance that the concrete slumps is measured and used as an indicator of the consistency and workability of the concrete. A higher slump indicates a more workable and flowable mix, while a lower slump indicates a stiffer and less workable mix. The slump test is an important quality control tool for ensuring that the concrete mix meets the desired specifications and is suitable for the intended application.

Learn more about slump test here:

https://brainly.com/question/14837381

#SPJ11

Which of the following can a business incorporate in its manufacturing stage to align with green design?

1. using recycled items
2. skylights
3. all of these
4. reusing water in production
5. solar panels

Answers

A business can incorporate all of these options to align with green design principles.

What is a green manufacturing process, specifically?

Employees can produce fuel, heat, or power from renewable sources for use inside their workplace. Wind, biomass, geothermal, solar, ocean, hydropower, landfill gas, and municipal solid waste are a few examples of these sources.

What does the company's green design entail?

The practise of taking into account and limiting environmental effect while producing goods is known as sustainable design or green design. Green design principles provide businesses a variety of opportunities to cut waste, repurpose resources, and recycle goods and materials.

To know more about principles visit:-

https://brainly.com/question/30401997

#SPJ1

Can a chiral product form from two achiral reactants?

Answers

No, a chiral product cannot form from two achiral reactants.

Chirality is a property of a molecule that cannot be superimposed on its mirror image, meaning that it has a non-superimposable mirror image (enantiomer). In order for a molecule to be chiral, it must have a stereocenter, which is an atom that is attached to four different groups.

If both reactants are achiral, then the product they form must also be achiral. This is because the reaction would not have introduced a stereocenter, so the product would not have a non-superimposable mirror image (enantiomer).

However, it is possible for a mixture of enantiomers to form if one or both of the reactants are chiral. In this case, the product would be a racemic mixture of both enantiomers, which is optically inactive because the rotation of one enantiomer cancels out the rotation of the other.

For more question on chiral product click on

https://brainly.com/question/30086472

#SPJ11

Calculate the molecular mass of menthol, C10H20O.A) 156.26 amu D) 48.17 amuB) 140.26 amu E) 137.11 amuC) 29.02 amu

Answers

The molecular mass of menthol (C10H20O) is 156.30 amu. Option A (156.26 amu) is the closest answer.

To calculate the molecular mass of menthol[tex](C10H20O),[/tex] we need to add up the atomic masses of all the atoms in the molecule.

The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are:

Carbon (C) atomic mass = 12.01 amu

Hydrogen (H) atomic mass = 1.01 amu

Oxygen (O) atomic mass = 16.00 amu

So, the molecular mass of menthol can be calculated as:

Molecular mass of menthol = (10 x carbon atomic mass) + (20 x hydrogen atomic mass) + (1 x oxygen atomic mass)

[tex]scss    = (10 x 12.01 amu) + (20 x 1.01 amu) + (1 x 16.00 amu)     = 120.10 amu + 20.20 amu + 16.00 amu      = 156.30 amu[/tex]

Learn more about mass here:

https://brainly.com/question/30025539

#SPJ11

When 8.00 g Na,S and 21.65 g Cd(NO3)2 are reacted, and 14.25 g sodium nitrate are formed, what is the percent yield?

Answers

The percent yield of the reaction is approximately 40.3%.

To calculate the percent yield of a reaction, we need to compare the actual yield to the theoretical yield. The theoretical yield is the maximum amount of product that can be formed based on the stoichiometry of the reaction, while the actual yield is the amount of product actually obtained in the experiment.

First, we need to write the balanced equation for the reaction between Na₂S and Cd(NO₃)₂;

Na₂S + Cd(NO₃)₂ → 2NaNO₃ + CdS

From the balanced equation, we can see that 1 mole of Na₂S reacts with 1 mole of Cd(NO₃)₂ to produce 1 mole of CdS and 2 moles of NaNO₃.

Next, we need to calculate the theoretical yield of NaNO₃ based on the given amounts of reactants;

The number of moles of Na₂S is; 8.00 g / 78.04 g/mol = 0.1026 mol

The number of moles of Cd(NO₃)₂ is: 21.65 g / 236.42 g/mol = 0.0916 mol (since Cd(NO₃)₂ has a 1:1 stoichiometry with Na₂S, it is the limiting reactant)

The theoretical yield of NaNO₃ is; 2 mol NaNO₃ / 1 mol Na₂S × 0.1026 mol Na₂S = 0.2052 mol NaNO₃

We can then calculate the actual yield of NaNO₃ based on the given mass;

The actual yield of NaNO₃ is; 14.25 g

Finally, we can calculate the percent yield;

Percent yield = (actual yield/theoretical yield) × 100%

Percent yield = (14.25 g / (0.2052 mol × 84.99 g/mol)) × 100%

Percent yield = 40.3%

Therefore, the percent yield is 40.3%.

To know more about percent yield here

https://brainly.com/question/12704041

#SPJ1

Other Questions
A mother is 25 years older than her daughter If the daughter's age is x years? (a) Express the mother's age in terms of x (b) Find x when the daughter's is one third of her mother's age Refer to the exhibit. The network administrator enters these commands into the R1 router:R1# copy running-config tftpAddress or name of remote host [ ]?When the router prompts for an address or remote host name, what IP address should the administrator enter at the prompt? Alice lost her EFTS card and reported it missing the next day. She found that $800 had been withdrawn from her savings account. Alice's loss is equal to:a. $0.b. $25.c. $50.d. $800.e. $800 plus a fee. Can comedy (jokes, comments, pictures, etc) be used to discuss serious topics such as poverty, hunger, fighting, or violence? Why or why not? A shirt costs $18 and is 15% off. How much money do you save? Question 1(Multiple Choice Worth 2 points)(Linear Functions LC)Which of the following equations represents a linear function?A x=1B y=12C y-12-1D4x-2=6 some suspensions separate into a solidlike mixture on the bottom and water on the top. when the solidlike mixture is stirred or agitated, it flows like a liquid. substances that behave in this way are said to be ayuda porfavornecesito resolver esto es simplificarlo no resolverlo ayuda pls Converting between number of moles and number of atomsCalculate the number of copper atoms in 2.45 mol of copper. The standard deviation of the data displayed in this dot-plot is most likely to be... (a) 20 (b) 5 (c) 11 (d) 8 (e) 15 Make a choice and explain your reasoning. Note: just a choice without explanations will not be accepted. the systematic gathering, recording, and analyzing of data about a specific issue, situation, or concern and the use of that data to create and implement plans to reach new target audiences 12. Jenny's water bottle holds 1.3 liters of water. How many milliliters of water does the water bottle hold? milliliters Altina Restaurant Flexible Budget for November 2010A. What was Watsons actual check average? Was this higher or lower than the original budget and flexible budget check average?b. Were Watsons actual food sales higher or lower than the flexible budget? By how much? Was this favorable or unfavorable?c. Was Watsons actual food cost higher or lower than the original budget? Why do you think this is so?d. Was Watsons actual food cost higher or lower than the flexible budget? By how much? Was this favorable or unfavorable? How can Watson use this information in his report to his general manager?e. Were Watsons variable salaries, wages, and benefits higher or lower than the original budget?f. Were Watsons variable salaries, wages, and benefits higher or lower than the flexible budget? By looking at both the original budget and the flexible budget, what conclusion can you draw about Watsons ability to control his labor costs?g. Was Watsons actual net income higher or lower than the flexible budget? By how much? Was this favorable or unfavorable?h. Overall, how do you think Watson is doing at meeting the budget goals set by the general manager? How should he respond to his general managers claim that his department is operating at a sub-par performance level? Historians argue that the twentieth century marks a significant break in world history for all of the following reasons EXCEPT:Petroleum use fundamentally changed the relationship of humans to the environment.The population of the world increased from 1.6 billion to 6.1 billion people.Communists established powerful new states in Russia and China.Low-wage laborers migrated from continent to continent. the cheese head in the image is a triangular prism. the base of the triangle is 12 and the height of the triangle is 8 in. the 3-d is 4 in. what is the volume of the cheese head 31. _____ is the extent to which an assessment technique yields consistent, repeatable results.A) Discriminant validity B) Clinical utility C) Reliability D) Content validity A central theme of the poem is nature and how William Wordsworth's life was affected by his experience of the natural world. How would you characterize Wordsworth's beliefs about this? Reread Lines Composed a Few Miles Above Tintern Abbey and write an essay of at least 300 words about Wordsworth's view of nature as presented in the poem. Cite specific evidence from the text to support your analysis. Damon recorded the snowfall in his town for each day of January. This line plot shows the distribution.Snowfall in January01234567InchesComplete the sentences.The distribution of snowfall amounts is best described as . So, the is a more appropriate measure of variation than the . Chris uses a pump to fill a giant beach ball that has a radius of 4 feet. What volume of air will it take to fill the ball? je suis desole mon maman c'est mort.Means what in French?