Should you use the flash above why or why not

Answer:

58.32

Explanation:

The mass number is one mole and for Mg it is 24.306 for O it is 15.999 and for H it is 1.008. because O and H have 2, you multiply them by 2 and add all the numbers and it equals 58.32

According to the concept of molar mass , in a sample of copper carbonate  there would be 26.47 g and 20 g of copper and oxygen respectively.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.

Molar masses of an element are given as relative atomic masses while that of compounds is the sum of relative atomic masses which are present in the compound.

In the given problem , sample of copper carbonate has copper, carbon and oxygen in the ratio of 63.54:12:48.Now, for 5 g carbon , amount of copper is calculated as,

5×63.54/12=26.47 g

And amount of oxygen is calculated as,

5×48/12=20 g.

Hence, for 5 g carbon there is 26.47 g copper and 20 g oxygen in copper carbonate sample.

Learn more about molar mass,here:

https://brainly.com/question/20818681

#SPJ1

pH of a solution that is 0.059M NH₄Cl at 25°C is 9.7

pH is the quantitative measure of the acidity or basicity of aqueous or other liquid solutions

Here given data is Kb=1.8×10⁻⁵ and we have to find pH pH of a solution that is 0.059M NH₄Cl at 25°C = ?

So, NH₄Cl dissociates completely in solution into NH₄⁺ and Cl⁻ NH₄⁺ being the conjugate acid of the base NH₃ and has a Ka = Kw/ Kb = 1.0×10⁻¹⁴/1.8×10⁻⁵ = 5.55×10⁻¹⁰ and the solution behaves acidic due to NH₄⁺ as it gives rise to H₃O⁺ on dissociation Cl⁻ because it is the conjugate base of the strong acid HCl is an extremely weak base and is unable to affect the pH of the solution measurably

NH₄⁺ dissociates as follows

NH₄⁺ + H₂O ⇔ H₃O+ + NH₃

So, [H3O⁺] = [NH₃], [NH₄⁺]= c - [NH₃]

Ka = [H₃O⁺] × [NH₃]/[NH₄⁺] =[H₃O⁺]²/{c - [H₃O⁺]}

So, neglecting [H₃O⁺] against c, we get

[H₃O⁺]= (Ka × c)¹/²

[H₃O⁺]=(5.55×10⁻¹⁰×0.059)¹/²

[H₃O⁺] = 1.64×10⁻¹⁰

pH = -log (1.64×10⁻¹⁰)

pH = 10-log1.64

pH = 9.7

Know more about pH

https://brainly.com/question/8798932

#SPJ1

A total of 1.104 ml of HCL is required to react with 2.15 g Zn(s).

Aqueous hydrogen chloride solutions are what we refer to as hydrochloric acid or muriatic acid. It has an unmistakable unpleasant fragrance and is colorless. A strong acid is how one would describe it. Most animal species, including humans, have it as a part of the gastric acid in their digestive tracts. There are numerous applications for hydrochloric acid. It is utilized in the manufacture of chlorides, fertilizers, dyes, and electroplating, as well as in the textile, rubber, and photographic industries. The skin, mucous membranes, and eyes are all corrosive to hydrochloric acid. A gas at ordinary temperature and pressure, hydrogen chloride (HCl) is a combination of the elements hydrogen and chlorine. Hydrochloric acid is a gaseous mixture of gas and water. HCl dissociates almost entirely, making it a powerful acid.

A stoichiometrically balanced equation

Zn(s) + 2HCl (a q) ---> ZnCl₂(a q) + H₂ m

Equivalent quantities of metal and hydrochloric acid.

Zinc moles = 2.15/65.39

= 0.032 mol

Moles of HCL = 0.134 mol × 2 / 2.50 × 10³

= 1.072 mol

So total = 0.032 + 1.072

= 1.104 liters

To know more about HCL, visit:

https://brainly.com/question/13016495

#SPJ9

The evidence which the attorney will most likely use to prove this accusation is Jared’s fingerprints in the car and is denoted as option C.

These refers to the information and happenings which help to prove that something is true and is used in investigations so as to ensure that the culprit is caught.

In this case, Jared’s fingerprints in the car is the most reliable information which puts him at the scene of the crime as it can't be edited and no fear of false witnesses as a result of this thereby making it the correct choice.

Read more about Evidence here https://brainly.com/question/375033

#SPJ1

Answer: C

Explanation:

Answer:

it is a high pressure.

Explanation:

im just guessing it

Warning signs are sometimes placed on aerosol cans to prevent people from throwing them into a fire, the contents of the gas in an aerosol can just after it is placed in a fire (c) it has a high temperature is correct option.

When an aerosol can is placed in a fire, the warning signs and precautions are typically in place to prevent potential dangers and hazards that could arise from the contents of the can. The behavior of the contents of an aerosol can in a fire can vary depending on the specific gas or substance contained within. However, some general principles apply:

Pressure Increase: Aerosol cans are often pressurized to allow the contents to be dispensed in a controlled manner. When exposed to heat from a fire, the pressure inside the can can rapidly increase. This pressure buildup can lead to the can potentially rupturing or exploding, which poses a significant danger to anyone nearby.

Potential for Fire Spread: If the contents of the aerosol can are flammable, they can contribute to the spread of the fire. The released flammable gases or liquids can ignite, leading to a more intense and widespread fire.

Toxic Fumes: The contents of some aerosol cans might include toxic or harmful substances. When heated in a fire, these substances can vaporize and release toxic fumes into the air. Inhaling these fumes can be hazardous to health.

Unpredictable Behavior: The behavior of aerosol cans in a fire can be unpredictable. Factors such as the type of propellant, container material, and contents can all influence how the can reacts when exposed to heat.

To know more about aerosol cans

https://brainly.com/question/33930202

#SPJ2

The color of light from a photon with an energy of 4.40x10⁻¹⁹ J is red

A photon is an elementary particle that is a quantum of the electromagnetic field including electromagnetic radiation such as light and radio waves and the force carrier for the electromagnetic force

The color of a photon is determined by the wavelength of the emission and photons are quanta of light, meaning they are a specific unit of emitted energy and here given energy is 4.40x10⁻¹⁹J means when it come to visible light the highest frequency color is violet also has the high energy and when the low frequency of visible light which is red has the low energy and here the energy is low that's why the color of photon is red

E = 4.40x10⁻¹⁹ J

E = hc/λ

where, λ is the wavelength, h be the Plank's constant and c be the velocity of light.

h = 6.63 × 10⁻³⁴ Js

c = 3 ×10⁸ m/s

λ =  6.63 × 10⁻³⁴ Js × 3 ×10⁸ m/s/ 4.40x10⁻¹⁹ J

λ =  4.520 nm

So, color of light from a photon with an energy of 4.40x10⁻¹⁹ J is red

Know more about photon

https://brainly.com/question/2285285

#SPJ1

The volume of the balloon at 2.00 × 104m: 1.52x[tex]10^3[/tex] L

Given:

[tex]P_i[/tex]  = 1.0 [tex]atm[/tex]      -> absolute atmospheric pressure

[tex]P_f[/tex]  = 61.0 mm Hg -->  atmospheric pressure

    = (61.0/760) [tex]atm[/tex]

    = 0.0802 [tex]atm[/tex]

[tex]V_i[/tex] = 171 L

[tex]T_i[/tex] = 20.0 [tex]^oC[/tex]

 = (20.0+273) K

 = 293 K

[tex]T_f[/tex] = 210.0 K

[tex]\frac{P_i \times V_i}{T_i} = \frac{P_f \times V_f}{T_f}[/tex]

(1 [tex]atm[/tex] * 171 L) / (293.0 K) = (0.0802 [tex]atm[/tex] * [tex]v_f[/tex])/(210.0 K)

[tex]V_f[/tex] = 1.52x[tex]10^3[/tex] L

The air around you has weight and it weighs down everything it touches. This pressure is called atmospheric pressure or atmospheric pressure. This is the force that the air above it exerts on the surface when gravity pulls it toward the ground. Air pressure is usually measured with a barometer.

Examples of air pressure, when you press an onion, there is  air  in the tube and the onion comes out as bubbles. However, there is air pressure on the surface of the liquid. When we release the bulb,  water moves inside the tube.

To learn more about atmospheric pressure, visit;

https://brainly.com/question/26149711

#SPJ13

On your last visit to the dentist, two cavities were found and the cost of your visit is 250

One who is skilled in and licensed to practice the prevention, diagnosis, and treatment of diseases, injuries, and malformations of the teeth, jaws, and mouth and who makes and inserts false teeth

Here given data is the price of a visit to the dentist is calculated according to the formula 50 + 100n and where n is the number of cavities the dentist find and n = 2 then we have to find cost of your visit = ?

So, 50 + 100n

= 50 + 100(2)

= 50 + 200

= 250

Know more about dentist

https://brainly.com/question/519448

#SPJ1

Answer:

Heliocentric system

Explanation:

Copernicus suggested that the Solar System's center should be the Sun rather than the Earth. A heliocentric system is the name given to such a model.

Hope this helps! :)

Both methane and nitrous oxide are more effective greenhouse gases than carbon dioxide.

Compared to other anthropogenic greenhouse gases carbon dioxide has the largest relative contribution to increasing the greenhouse effect. Compared to other greenhouse gases, carbon dioxide is most effective at trapping heat near the surface. Carbon dioxide is called a greenhouse gas because it is one of the gases in the atmosphere that warms the earth through a phenomenon called the greenhouse effect.

Water vapor is the most powerful greenhouse gas in the Earth's atmosphere and a unique player among greenhouse gases. The amount of water vapor in the atmosphere is usually not directly changed by human actions. It depends on the air temperature. Compared to other anthropogenic greenhouse gases, carbon dioxide has the largest relative contribution to the increase in the greenhouse effect.

Learn more about A greenhouse here:-https://brainly.com/question/12684997

#SPJ1

Answer: every object in the universe with some mass attracts every other object. As the law of gravitation could be applied to all such objects, it is also known as Newton's law of universal gravitation, that is, its application is universal.

Explanation:

4.33 L of solution is needed to prepare a 4.20 M HCL solution that contains 655 g HCL.

To know more about Molarity visit:

https://brainly.com/question/8732513

#SPJ13

Answer: 4.076L

Explanation:  The formular for Molarity is moles/Volume

So 0.280M = 0.0687 mol/Volume

Divide both sides by the moles

0.280M/0.0687mol = _______ liters

4.0756  = 4.076 Liters

A reaction in which reactants react to form products is called forward reaction. In some reactions, products would change back into reactants which is called backward reaction.

In forward reaction, the reactants react with each other and forms product as a result. The reaction occurs from left to right in an equation.

In backward reaction, the products that was formed would revert back to form reactants due to surrounding conditions. The reaction occurs from right to left in an equation.

The type of reaction where both forward and backward reaction takes place is called reversible reaction. When the rate of the reaction between forward and backward reaction becomes equal, it reaches a state of equilibrium.

To know more about Reversible reaction

https://brainly.com/question/16614705

#SPJ1

As per the provided figure, there is a presence of the multilayers of substances settled according to their density. The densest liquid will settle at the bottom while the least dense will float at the top.

Density can be said as the substance's mass per unit of volume when explained in the mathematical terms. The measure of how much dense a substance is can be taken out through a measure of its density.

According to the pic the layers arranged here can be classified according to the order from least dense liquid to the densest liquid according to the provided order

Rubbing alcohol < Dish Wash < Milk < Corn Syrup

Then according to the respective positions of the solids arranged throughout the multilayer of the pic, the provided order can be devised that is from the least dense solid to the densest solid:

Ping pong ball < Beads < Popcorn Kernels < Bolt

To know more about density, visit:

https://brainly.com/question/952755

#SPJ13

Complete Question

1) Order the following liquids in order form the least dense to the densest. Dish Soap, Rubbing Alcohol, Milk, Corn Syrup.

2) Order the following solids in order from the least dense to the most dense: Bolt, Beads, Ping Pong Ball, Popcorn Kernel

1.MgSO4 can be created in the given reaction with a mass of 1.985 grams.

2. MgSO4 has a percent yield of 10.68%.

The amount of solution a chemical is present in determines its molarity (M). Molarity is the measure of a solute's concentration in a solution expressed in moles per liter. Molarity is another term for a solution's molar concentration.

1.The following is the full, balanced chemical equation:

Na₂SO₄(aq)+MgCl₂(aq)⟶MgSO₄(s)+2NaCl(aq)

We are aware,

Molarity (M) is the quantity of moles (n) in a liter of solution.

Volume x Molarity equals the number of moles of Na2SO4.

Moles of Na₂SO₄ = 0.190×0.0871

Moles of Na₂SO₄ = 0.016549 moles.

Moles of MgCl₂ = 0.311×0.144

Moles of MgCl₂ = 0.044473 moles.

As can be seen, there are less moles of Na2SO4 present.

Na2SO4 will therefore operate as a limiting agent and regulate the reaction.

Moles of Na₂SO₄ = Moles of MgSO4

Moles of MgSO₄ = 0.016549 moles.

As we are aware,

Mole = mass produced/molecular weight

Molar mass of MgSO₄ = 120grams/mole

substituting the values,

0.016549 = mass of Mg produced/120

Mass of MgSO₄ produced = 1.985 grams.

2. Formula for percentage yield: (experimental mass divided by theoretical mass, multiplied by 100)

Theoretical mass = 1.985 grams

Experimental mass = 0.212 grams.

Percentage yield = 0.212/1.985×100

Percentage yield of MgSO₄ = 10.68%.

To know more about Molarity, visit,

brainly.com/question/26873446

#SPJ2

The average atomic mass of the lithium will be 11.00 amu

The average atomic mass of an element is the cumulative sum of the mass of its isotopes multiplied by their respective abundances.

The average atomic mass is mathematically given by the following formula:

Average Atomic Mass = f1M1 + f2M2 + ......fnMn

Where f = abundance and M = mass number.

In this case, lithium has 2 isotopes.

Mass of isotope 1 = 7.0160

The abundance of isotope 1 = 92.5%

Mass of isotope 2 = 6.0151

The abundance of isotope 2 = 7.5%

Average atomic mass of Lithium = 7.0160 x 0.925 + 6.0151 x 0.75

                                             = 6.4898 + 4.511325

                                               = 11.00 amu

Thus, lithium with 2 isotopes has an average atomic mass of 11.00amu.

More on average atomic mass can be found here: https://brainly.com/question/13753702

#SPJ1

The number of moles of cobalt (Co) atoms in 9.0 x 10⁹ Co atoms is 1.49 × 10-¹⁴ moles.

The number of moles of a substance can be calculated by dividing the number of atoms of the substance by Avogadro's number as follows:

no of moles = no of atoms ÷ Avogadro's number (6.02 × 10²³)

According to this question, 9.0 x 10⁹ cobalt atoms is given. The number of moles can be calculated as follows:

no of moles = 9.0 x 10⁹ ÷ 6.02 × 10²³

no of moles = 1.49 × 10-¹⁴ moles

Therefore, 1.49 × 10-¹⁴ moles of cobalt are in 9 billion atoms of the element.

Learn more about no of atoms at: https://brainly.com/question/8834373

#SPJ1

The isotope that has the greater abundance is lithium-7

To know which isotope has the greater abundance, we shall detertmine the abundance of each isotope. This can be obtained as follow:

Average atomic mass = [(Mass of A × A%) / 100] + [(Mass of B × B%) / 100]

6.94 = [(6.02 × A) / 100] + [(7.02 × (100 -A) / 100]

6.94 = 0.0602A + 7.02 + 0.0702A

Collect like terms

6.94 - 7.02 = 0.0602A - 0.0702A

-0.08 = -0.01A

Divide both sides by -0.01

A = -0.08 / -0.01

A = 8%

Thus,

B = 100 - A

B = 100 - 8

B = 92%

From the above calculations, we obtained:

Thus, we can conclude that lithium-7 has the greater abumdance

Learn more about isotope:

https://brainly.com/question/11026801

#SPJ1

11.5 ml sample of N₂ gas with 25°C temperature is increases to 75°C  in constant pressure. The volume of N₂ gas at 75°C at constant pressure is 13.4 ml

Given that

V1 = 11.5 ml

T1 = 25°C = 298 K

T2 = 75°C = 348 K

We need to find the volume of gas (V2) at 75°C

We know that,

V1 / T1 = V2 / T2

11.5 / 298 = V2 / 348

V2 = (11.5 × 348) / 298

V2 = 13.4 ml

Thus, the volume of gas (V2) at 75°C = 13.4 ml

To know more about Volume

https://brainly.com/question/28058531

#SPJ1

The possible masses of calcium oxide and carbon dioxide that can form when 400g of calcium carbonate undergoes decomposition is

The correct measurement of the element neon (Ne):

When reactants of a reaction are known, the fact that can always be deduced about the products is:

The correct molar mass correct for carbon dioxide (CO₂) is 44.01 g/mol; option B

The number of moles in 43 g of CO₂ is 0,977 moles.

According to the law of conservation of matter, the statement that best describes a balanced chemical equation:

The number of moles of atoms of each element must be the same in the reactants and in the products.

Based on the law of conservation of mass, the product of the reaction of nitrogen gas and hydrogen is 2 NH₃.

To calculate the number of moles from mass, take the quotient of mass and molar mass; option B

The ratio of components in the reaction of sugar with oxygen gas to produce carbon dioxide and water is:

For every 12 moles of CO₂ produced, 2 moles of C₆H₁₂O₆ is needed; option A

The molar mass of NH₄Cl is 53.5 g/mol; option A.

The molar mass of a substance is the mass of one mole of the substance.

The molar mass of carbon dioxide (CO₂) is calculated below:

molar mass of carbon dioxide, CO₂ = 12 + 16 * 2

molar mass of carbon dioxide, CO₂ = 44.0 g/mol

The moles of CO₂ in 43g of CO₂ is calculated as follows:

moles = mass / molar mass

Moles of CO₂ = 43 / 44 = 0.977 moles

The mass of CaO and CO₂ from the decomposition of 400 g of calcium carbonate is given below:

1 moles of CaCO₃ produces 1 mole of CaO and CO₂

4 moles of CaCO₃ produces 4 moles of CaO and CO₂

Mass of 4 moles of CaO = 4 * 56 = 224 g

Mass of 4 moles of CO₂ = 4 * 44 = 176 g

Learn more about molar mass at: https://brainly.com/question/837939

#SPJ1

The image they show us is a solubility graph. It tells us the grams of solute that dissolve at a certain temperature. We must first identify the mentioned solute, this is NaNO3. We must draw a vertical line that passes through 30°C and a horizontal line that passes through 90 grams/100g of water.

When tracing the lines we see that the intersection is below the solubility curve of NaNO3. This means that there is less solute than the maximum amount that water can dissolve at 30°C. Therefore, all 90 grams will dissolve and we will have an unsaturated solution.

Answer: Third option. unsaturated

The molar mass of the unknown gas is 31.74 g/mol

The molar mass of a substance is the mass in grams of 1 mole of the substance

Here given data is sample of an unknown gas is found to have a density of 1.31 g/L  at a pressure of 0.621 atm and a temperature of 54 °C and we have to fond molar mass = ?

So given data is

Density = 1.31g/L

Pressure = 0.621 atm

Temperature = 54°C means 54 + 273.15 = 326.15 K

So, the formula is PV = nRT

R = Rydberg constant = 0.0821 atm/k⁻mol

n = PV/RT

n = 0.621 atm×1.31g/L/0.0821 atm/k⁻mol×326.15 K

n = 31.74 g/mol

The molar mass of the unknown gas is  31.74 g/mol

Know more about molar mass

https://brainly.com/question/28447762

#SPJ1

When we have a molecule, we have to identify if it is a charged molecule (ions) or a neutral one. If it doesn't have any sign of + or -, it means that the molecule is neutral, so the charge is going to be zero.

In this particular case, we have the nitrogen gas:

As we can see, it is a neutral molecule, so its charge has to be zero. As it is a molecule composed only of one element, then the oxidation number has to be zero (0).

8 hours Short Term Exposure Limit (STEL) for 15 minutes is 750 ppm; Weighted Average (TWA) is 500 ppm.

The threshold limit value is thought to be the maximum exposure level that a worker may endure throughout a shift at work without suffering any negative consequences. TLV is technically a term that the American Conference of Governmental Industrial Hygienists reserves.

TLVs are the highest average airborne concentrations of hazardous materials to which healthy adult employees can be exposed over the course of a working lifetime—during an 8-hour workday and a 40-hour workweek—without developing noticeably detrimental health consequences.

The acetone TLV value in parts per million:

The acetone TLVs established by the ACGIH are 750 ppm for an 8-hour TWA and 1000 ppm for a 15-minute STEL.

According to OSHA, the acceptable exposure limit (PEL) for airborne particles is 1,000 ppm when averaged over an 8-hour work shift. The recommended airborne exposure limit (REL) for a 10-hour work shift is 250 ppm, according to NIOSH.

To know more about TLV value, click on the link below:

https://brainly.com/question/16877061

#SPJ9

There are 2 maximum number of moles of [tex]SO_{3}[/tex] that can be produced by the reaction of 2.0 mol of S with 3.0 mol of [tex]O_{2}[/tex] .

The chemical reaction of the formation of [tex]SO_{3}[/tex] from S and [tex]O_{2}[/tex] is given as,

2S + 3 [tex]O_{2}[/tex] → 2 [tex]SO_{3}[/tex]

From the above chemical equation we can conclude that the 2 moles of sulfur and 3 moles of oxygen reacts to form 2 moles of [tex]SO_{3}[/tex] .

A chemical equation can be considered in terms of moles , or 6.023 times ten to the 23 , which is a predetermined number of molecules or atoms . We can then calculate the weight required for each compound using moles and atomic weight, which is the weight in grams of 1 mole of a specific element in reaction .

to learn more about reaction ,

https://brainly.com/question/28270550

#SPJ1

The balanced chemical reaction equation as we can see from the question on the left and right hand sides;

[tex]3H_{2} + N_{2} ------- > 2NH_{3}[/tex]

Now we know that we use the chemical reaction equation to show the relationship between the reactants and the products in the system. We know that there is need to balance the chemical reaction equation so that we can be able  to make sense of a given chemical reaction equation.

A chemical reaction equation is said to be balanced when the number of atoms of each of the elements on the reactant side is the same as the number of atoms of each of the elements on the products side. This could also be called the process of making an atom count to show the number of each of the atoms present in the system.

The principle stated above is used to obtain the balanced chemical reaction equation. If we apply it, we would then be able to obtain the equation as have been shown in the answer section above.

Learn more about chemical reaction equation:https://brainly.com/question/6976143

#SPJ1

From Hund's rule, we can now see why the two 2p orbital electrons occur singly and are not paired in one orbital.

According to the Hund's rule, we know that before, we can pair the electrons that are present in the atoms of an element, the electrons must first of all occur singly or have the maximum parallel spins before they are pair.

In this case, we have an electron that has six electrons. The electron configuration of the element has been shown in the image attached. we can see that there are two electrons that singly occupy the 2p orbitals.

This serves to validate the Hund's rule.

Learn more about Hund's rule:https://brainly.com/question/11862607

#SPJ1

Answer:

We have an electron that has six electrons, and there are two electrons that singly occupy the 2p orbitals. According to Hund's rule, electrons arise singly in an atom before pairing occurs.

Explanation:

The volume of the 264 grams of NO gas at STP is 197.12 L

At standard temperature and pressure (STP),

1 mole of a gas = 22.4 L

With the above information, we can determine the volume of 264 grams of NO. Details below.

We'll begin by obtaining the mole of 264 grams of NO. This can be obtained as follow:

Mole = mass / molar mass

Mole of NO = 264 / 30

Mole of NO = 8.8 mole

Finally, we shall determin the volume as follow:

1 mole of NO = 22.4 L

Therefore,

8.8 moles of NO = (8.8 mole × 22.4 L) / 1 mole

8.8 moles of NO = 197.12 L

Thus, 264 grams has a volume of 197.12 L at STP

Learn more about volumes at STP:

https://brainly.com/question/22311771

#SPJ1