Yes, oil exploitation should be banned in areas of natural beauty.
Exploitation of natural resources is the use of natural resources for economic growth, sometimes with a negative result of conducting environmental degradation. Increasing population in world has compelled humans to exploit natural resources to meet economic needs or in economic growth.
History says that oil and gas development on public lands has damaged ecosystems, harmed species, and contaminated soil, air, and water. The construction of drilling facilities fragments public lands, displacing wildlife and destroying habitat, while oil spills, fires and other pollution can contaminate surface and ground water.
Roads built for drilling increase human activity in formerly undisturbed areas and can lead to increased poaching, litter, roadkill and human-caused fires; and they facilitate the spread of exotic species that replace native plants and animals. Most specifically, oil and gas development creates our dependency on fossil fuels, committing the people and their public lands to more greenhouse gas emissions and global warming.
Therefore, the answer is yes.
To know more about exploitation, click below-
https://brainly.com/question/11321194
#SPJ1
A rapid temperature increase about 55 mya created tropical conditions around the world. What did these conditions cause?.
A rapid temperature increases about 55 mya created tropical conditions around the world causes adaptive radiation of Euprimates.
Previously known as the "Initial Eocene" or "Late Paleocene thermal maximum" the Paleocene-Eocene thermal maximum (PETM), also known as "Eocene thermal maximum 1" (ETM1), was a period of time when the global average temperature rose by more than 5-8° C throughout the event.
it has been calculated that the related period of significant carbon emission into the atmosphere lasted between 20,000 and 50,000 years. it took the entire warm era almost 200,000 years to complete. the earth's temperature rose by 5-8 °C.
To know more about Temperature, click on the link below:
https://brainly.com/question/24746268
#SPJ4
A rapid temperature increases about 55 mya created tropical conditions around the world causes adaptive radiation of Euprimates.
Previously known as the "Initial Eocene" or "Late Paleocene thermal maximum" the Paleocene-Eocene thermal maximum (PETM), also known as "Eocene thermal maximum 1" (ETM1), was a period of time when the global average temperature rose by more than 5-8° C throughout the event.
It has been calculated that the related period of significant carbon emission into the atmosphere lasted between 20,000 and 50,000 years. it took the entire warm era almost 200,000 years to complete. the earth's temperature rose by 5-8 °C.
To know more about Temperature, click on the link below:
brainly.com/question/24746268
#SPJ4
Why is it important to start seeing native Americans as “present day people”?
The historical backdrop of Local Americans is extraordinarily lengthy and huge, dating millennia and continuing after the pre-Columbian Time
.Understanding not only the present situation of Indigenous peoples but also that of our nation is dependent on knowing about this past.White Europeans and Native American Indian tribes fought a lot because of this mix of beliefs. For sure, Local Indians never claimed to adjust to those unfamiliar traditions and battle against them. Conflicts and wars were sparked when white Europeans took Indian land to make it productive. The diverse territory of New England is an illustration of these cultural differences and conflicts.
Indian tribes and white settlers in this part of North America thought and behaved very differently.While Indigenous Peoples preserve 80% of the world's remaining biodiversity, they own, occupy, or use only a quarter of the planet's surface area.They have important ancestral knowledge and expertise regarding climate adaptation, risk mitigation, and disaster risk reduction.
Learn about native americans:
https://brainly.com/question/24724492
#SPJ1
PLEASE HELP, this was due yesterday i really need help
Answer:
ask your teacher to email you the in docs to open them and then just answer the questions
on the map above where is the anatolian plateau located
Which of the following religions is appropriately matched with its region of origin?
Answer:
Buddhism…India
Explanation:
Answer:
Hinduism - India
Buddhism - Southeast Asia
Judaism - Middle East
Christianity - Europe
Hinduism - India
During wastewater treatment, which of the following steps will happen after organic matter is broken down by bacteria in aeration basins?
Primary clarifiers allow greases and fats to rise.
Disinfection treats and purifies the water.
Bar screening physically removes large objects.
Grit screening allows large particles to settle.
The correct answer is bar screening physically removes large objects or secondary clarifiers in wastewater treatment.
Clarifiers operate on the settling principle of gravity. Due to the quiescent circumstances offered in the Clarification zone, the heavier suspended materials settle in the clarifier. With the aid of moving scraper blades, the settled solids are swept to the center well designed for collecting sludge.
The secondary clarifiers eliminate wastes and suspended solids from the biological contactor units' rotating effluent. By allowing the wastewater to pass through the clarifiers at a slower speed than necessary for the larger particles to settle out, the settleable solids are removed.
To separate biological floc from the treated liquid waste stream, supplementary clarifiers are used. Most frequently, secondary clarifiers are addressed in combination with biological wastewater treatment systems for suspended growth.
To know more about 'wastewater treatment' related questions
visit- https://brainly.com/question/25151459
#SPJ1
he differences among the three types of seismic waves: p-waves, s-waves and surface waves with respect to the pattern of motion and speed. which one causes the greatest destruction to buildings? why?
The three types of seismic waves that cause the greatest damage to buildings are P waves, which have a high speed so they can damage buildings.
EEkplantion
Seismic waves are caused by the sudden movement of materials within the Earth, such as slip along a fault during an earthquake.
There are three basic types of seismic waves – P-waves, S-waves and surface waves. P-waves and S-waves are sometimes collectively called body waves.
Learn more about
seismic
To what extent do urban areas in lower income countries (LICs) or newly emerging economies (NEEs) provide social and economic opportunities for people?
Urban areas in lower income countries (LICs) or newly emerging economies (NEEs) provide social and economic opportunities for people. Consider the availability of work prospects in industries like manufacturing and construction, as well as in areas with access to healthcare, transportation, and education. Socially, metropolitan regions frequently provide better housing, sanitization practices, and utilities like water and electricity.
For instance, occupations and employment prospects are typically more plentiful, consistent, and reachable in metropolitan locations. In truth, those who are rich in society tend to perceive or have access to LIC's benefits more frequently. Consider the cost of living (which is greater in an urban location), the strain that an influx of people may place on infrastructures and employment possibilities, the prevalence of disease, and the quality and sanitation of the water supply. As a result, there is an increased level of social unrest, violence, and poverty.
Learn more about Social unrest here:
https://brainly.com/question/28000642
#SPJ1
Which diagram accurately represents the relationship between supply,
demand, and price of a product?
Answer:
I would say its either C or D
Explanation:
which of the following is a triggering mechanism for mass wasting? group of answer choices drought slope reduction excessive vegetation heavy rain
Major Triggers for Mass Wasting are Water, Slopes, Vegetation Removal & Earthquakes.
Moreover, Mass wasting events are triggered by changes that exceed slope angles and weaken slope stability, such as rapid snowmelt, intense rainfall, earthquake tremors, volcanic eruptions, storm surges, stream erosion, and human activity. The most common trigger is excessive rainfall. Mass wasting is influenced by slope, material strength, water content and amount of vegetation. Mass wasting can be caused by storms, earthquakes, eruptions, and human activity. Fall, slip, flow, and creep are the main categories of mass wasting mechanisms.
You can learn more about this at:
https://brainly.com/question/17071531#SPJ4
suppose that you were a researcher trying to understand how rising levels of atmospheric co2 might affect ragweed plants, and thus seasonal ragweed allergies. what questions, hypotheses, and predictions might you want to study? complete the flow chart by selecting the hypothesis and predictions that follow from the question you're trying to answer. not all labels will be used.
Increased atmospheric CO₂ levels can affect ragweed crops:
Hypothesis (1): CO₂ levels affect ragweed pollen productionPrediction (a): Plants grown at higher CO₂ levels produce more pollenHypothesis (2b): CO2₂ levels affect the concentration of allergen protein in ragweed pollenPrediction (c): Plants growing at higher CO₂ concentrations produce higher levels of allergens.This question completes the diagram, let's see at the picture.
What is the difference between prediction and hypothesis?Differences between hypotheses and predictions, including Hypotheses, are only temporary conjectures that can be tested by scientific methods, hypotheses must be logical and by facts. Whereas a prediction is a statement made in advance about what is expected to happen next, in the order of events.
Learn more about prediction and hypothesis here https://brainly.com/question/551449
#SPJ4
the ice-age hypothesis developed from ______.
The ice-age hypothesis developed from the theory of the Ice Age.
An ice age is an extended period of time during which the temperature of the Earth's surface and atmosphere decreases and continental and polar ice sheets and alpine glaciers existed or expanded.
The Earth's climate alternates between ice ages and greenhouse periods when there are no glaciers on Earth. An ice age is a long period (millions to tens of millions of years) during which the earth's temperature was relatively cold and much of the earth was covered by continental ice sheets and alpine glaciers.Learn more about Ice Age here: https://brainly.com/question/7387582
#SPJ4
What was the Triassic period known for?
There was a lot of change during the Triassic Period. This time period saw significant changes in the variety and predominance of life on Earth, bookended by extinctions.
Describe the Triassic period?The worst extinction event to ever affect life on Earth (252-201 million years ago) marked the start of the Triassic Period.
One of the most important catastrophes in the history of our planet was the Permian-Triassic extinction catastrophe, sometimes referred to as the Great Dying, which occurred about 252 million years ago. The difference between both the Palaeozoic and Mesozoic eras is symbolised by it. It is still unclear what caused the Permian-Triassic extinction event. Many hypotheses have been put out, including an unidentified asteroid impact, large-scale volcanic eruptions within what is now Siberia, a release of methane from the ocean's depths, sea level change, rising aridity, or a composite of a number of these.Thus, extinction events dominate the definition of the Triassic, but the continents' locations at that time also play a significant role. Pangea was the lone supercontinent that existed.
To know more about the Triassic period, here
https://brainly.com/question/11049888
#SPJ4
Wet igneous rock melts at a lower temperature than the dry version of that same rock because.
Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.
What is volatiles?Volatiles include nitrogen, carbon dioxide, ammonia, hydrogen, methane, sulfur dioxide, water, etc.Volatiles are easily vaporizable substances present in magmas, such as H2O and CO2, whose vapor pressure is high enough that they accumulate in the gas phase that forms.Volatile means that a substance boils at a low temperature and changes from a liquid to a gas phase. Substances that are gaseous at room temperature are highly volatile.They have high volatility. It can only be considered liquid when exposed to low temperatures or high pressure. Volatility is a statistical measure of the spread of returns for a particular security or market index. In most cases, the higher the volatility, the higher the security risk. Volatility is often measured using the standard deviation or variance between returns of the same security or market index.To learn more about volatiles from the given link :
https://brainly.com/question/29394588
#SPJ4
Why is coral bleaching a problem?
Coral reefs act as natural barriers by absorbing the impact of storm surges and waves. Without them, we are forced to rely on artificial seawalls, which are more expensive, and more harmful to the environment to build.
Define the term coral bleaching?Coral bleaching is important because, after these coral die, reefs hardly regenerate.
Coral populations are declining, making it difficult for them to reproduce and harming the entire reef ecosystems that support both people and wildlife. Some of the greatest biodiverse habitats on the world are supported by coral reefs. The species at the bottom of ocean food web are also supported by them. By destroying links with in food chain and denying some fish other crustacean species a location to reproduce and mature, bleached coral additionally exacerbates the overfishing problem. Anyone who depends on these creatures as their main source of money or protein will run into difficulties. Finally, reef tourism supports hundreds of jobs and generates billions of dollars annually.Thus, everything is at danger because of bleached coral reefs that lack wonderful marine life.
To know more about the coral bleaching, here
https://brainly.com/question/12553366
#SPJ4
Trellis and annular drainage patterns are similar in that they are both structurally controlled. How do they differ? A trellis pattern follows ___.
An annular pattern follows curving layers around a centre location, and a trellis pattern follows one structure before cutting across a ridge and following another.
A stream is any body of moving surface water, from a small trickle to a powerful river. The drainage basin of a stream is the region from where the stream's water originates. Unless part of the water is able to traverse into a neighbouring drainage basin via groundwater movement, all precipitation (rain or snow) that falls within a drainage basin eventually flows into its stream.
The type of rock underlying and the structures inside that rock have a significant impact on the arrangement of tributaries within a drainage basin (folds, fractures, faults, etc.).
To know more about Rocks, click here:
https://brainly.com/question/19930528
#SPJ4
mexico won its independence from spain in _. many people in the united states hoped that this development would mean better trade between the united states and settlements along the rio grande. in particular, american traders wanted to conduct trade with_
In 1821, Mexico reclaimed its independence from Spain. Many Americans believed that this development would improve commercial relations between their country and communities along the Rio Grande. American traders in particular desired to deal with Sante Fe.
The Treaty of Córdoba was signed on August 24, 1821, by Spanish Viceroy Juan de O'Donoj, approving a plan to transform Mexico into a sovereign constitutional monarchy. Iturbide was named the emperor of Mexico in 1822 since there had been no discovery of a Bourbon king to rule Mexico.
The Rio Grande (Rio Bravo), which forms the border between Mexico and the United States, rises at the Continental Divide in the San Juan Mountains of southern Colorado, United States, and flows through the center of New Mexico to the border between Texas and Chihuahua.
To learn more about Mexico
https://brainly.com/question/11374711
#SPJ9
8. folds are examples of deformation while faults or fractures are types of deformation. a. brittle, ductile b. ductile, brittle the axial trace (also known as fold axis) is the imaginary line that divides a fold in half. notice when the units are dipping away from each other they form a structure called an antiform. notice when the units on either side of the axial trace are dipping towards each other, they form a synform. 9. anticlines have the unit in the middle of the fold. a. oldest b. youngest 10. synclines have the unit in the middle of the fold. a. oldest b. youngest
b)Folds are examples ductile of deformation while faults or fractures are types brittle of deformation.
Folds are bends in rocks caused by compressional pressures. Tensional forces along which rock displacement occurs cause deformation. When compressional force is applied to ductile or flexible rocks, folding results.
Rocks folded into an arching upward and dipping away from the fold's center are called anticlines. The youngest rocks are draped over the oldest, which are located in the center of an anticline. An adome is a structure formed when rocks arch upward to form a circle. So the correct option is a.
A syncline is a fold in the ground where the oldest rocks are on the outside and the youngest rocks are on the inside. A basin is created when rocks bend downward in a circular pattern. So the correct option is b.
For more questions like Fold click the link below:
https://brainly.com/question/29416697
#SPJ4
walrus feed on ______.
Answer:
Clams, snails, mollusks, sea cucumbers, crabs,
Explanation
Answer: shellfish, worms, crabs, etc. and perhaps some fishes.
Explanation:
They live in and on the beach so they eat what is closest to the shore.
What phase would be the earth appear to be in if you were standing on the moon at full moon?.
Phases of the moon are defined as changes in the shape of the moon that can be seen from the earth's surface. Based on these problems, the phase where we can see the full moon from the earth's surface is the full moon.
Explanation moon phasePhases of the moon are defined as changes in the shape of the moon that can be seen from the earth's surface. The change in the shape of the moon is caused by the reflection of sunlight on different lunar surfaces. Each phase of the moon takes about a week, so all phases of the moon can occur for approximately 28 days.
The moon has several phases of shape change. Here are the different phases of the moon:
New moon, the position of the moon is located almost parallel to the earth and sun.The first quarter, the position of the moon at a certain angle to the sun and the earth.Full moon, ie the position of the moon is located almost parallel to the earth and the sun, with the position of the earth in the middle.The last quarter, like the first quarter, is the position of the moon at a certain angle to the sun and the earth.Learn more about phases of the moon at : brainly.com/question/12676209
#SPJ1
Wet igneous rock melts at a lower temperature than the dry version of that same rock because.
Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.
What are igneous rock?
One of the three primary rock types, along with sedimentary and metamorphic rocks, is igneous rock, also known as magmatic rock. When lava or magma cools and solidifies, igneous rock is created. The partial melting of pre-existing materials in the mantle or crust of a planet can produce the magma. Based on their chemical makeup, igneous rocks can be categorised into four groups: felsic, intermediate, mafic, and ultramafic. Magma, or melted rock material, is found underneath the surface of the Earth and is the source of igneous rocks. When magma from deep inside the Earth rises to the surface or is pushed upward by a volcano as lava and ash, igneous rocks are created. It crystallises into rock here when it cools.
Hence, Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.
To know more about igneous rocks click,
https://brainly.com/question/18297174
#SPJ4
What is the outcome of hotspots? question 4 options: formation of island chains constant volcanic eruptions divergent boundary creation transform boundary creation
The outcome of hotspots is B)constant volcanic eruptions. So, correct option is B.
A hotspot is the huge plume of heated mantle layer that rises from the planet's interior. The Tectonic plate borders have no bearing on where a hotspot is located on the surface of planet. Similar to how a line of melted wax appears when a sheet of the parchment paper is slowly dragged over a burning candle, a line of the volcanoes develops as a plate moves over a hotspot.
These same "hotspot" volcanoes are formed when the slender stream of hot crust rises up from the core of the earth and melts the fissure in the plate to allow the magma to seep upward. Continuous volcanic outbursts are the result of the hotspots. When one of the Earth's plates passes over an abnormally hot region of mantle, hotspots develop.
To know more about hotspots, visit here:
https://brainly.com/question/4309840
#SPJ4
(Complete question) is:
What is the outcome of hotspots? options are:
A)formation of island chains
B)constant volcanic eruptions
C)divergent boundary creation
D)transform boundary creation
Overproduction results in offspring with _[blank 1]_. Some of these offspring are better at surviving and will prosper, while others are not and will die off. In this way, each generation has genes that _[blank 2]_.
Answer: the survival rate of the most adapted and fittest organism increases and others which are weak will struggle for survival and may die.
Explanation: I think you have to look at some video about offspring and how they produce they that i did i am in environmental sciences.
find the areal scale for 1 cm to 2 km
Answer:
means 1 cm on the map represents 50,000 cm in real life. There are 100,000 cm in 1 km so we can think of this as 1 cm representing 0.5 km or as 2 cm representing 1 km.
so the answer is 200000
A scale of 1:50000 (or 1 in 50000) means that one centimeter on a map corresponds to fifty thousand centimeters along the actual ground. Thus, 1 centimeter is equivalent to 0.5 km.
What is areal scale ?AREAL-SCALE The relationship between areas on a map and the real world is known as areal scale. It is the root square of the equivalent area on an ellipsoid (A) on the map (a) in equation (Eq) (5). The distortions caused by map projection have no effect on areal scale.
Simply multiply the distance by the scale factor after measuring the distance on the photo (photo distance). Always keep in mind that scale is determined by the distance from the shot to the ground. An aerial image, for instance, has a scale of 1:15,000.
The scale of maps is known. Scale displays theratio of a projected coordinate system, such as the Universal Transverse Mercator, to a distance on a map (UTM). However, this definition is constrained by the fact that various lines result in various scales. For users who may need an ideal scale—one scale reflecting the entire map—this frequently has drawbacks.
Learn more about areal scale here
https://brainly.com/question/24868544
#SPJ2
Why are the middle latitude regions such as mediterranean areas, southern argentina, and southern australia projected to experience much less rainfall in the future?.
Due to subtropical region high-pressure bands moving further towards the low latitudes, middle-latitude regions like the Mediterranean region, Southern Argentina, and Southern Australia are expected to receive less rainfall in the future.
What is subtropical?To the north and south of the tropics are the subtropical zones, also known as the subtropical region. They span the middle latitudes between 23°26′10.7′′ and roughly 35° north and south, geographically forming a part of the temperate zones of both hemispheres. These latitudes are within the range of horses.
Vietnamese Northern regions in general and the nation's capital Hanoi in particular have subtropical regions.
The hot summers and mild winters with infrequent frosts that characterize subtropical climates are common. Most subtropical regions can be divided into two categories: humid subtropical climates, where seasonal rainfall is typically concentrated in the warmest months, such as Southeast China and the Southeastern United States, and dry summer or Mediterranean climates, where seasonal rainfall is concentrated in the cooler months, such as the Mediterranean Basin or Southern California.
To learn more about subtropical from the given link
https://brainly.com/question/14606358
#SPJ4
________ is the downslope movement of rock, regolith, or soil under the direct influence of gravity.
Mass movement is the downslope movement of rock, regolith, or soil under the direct influence of gravity.
Mass motion is defined as the process of material erosion, transport and accumulation occurring on both gentle and steep slopes, primarily due to gravity. Mass movements lead to the leveling and shaping of the landscape. Various types of mass movements occur, such as landslides and landslides.
Mass transfer, often called mass wastage, is the downward movement of a mass of surface material such as soil, rock, or mud. This mass motion usually occurs along slopes and mountains under the influence of gravity and can be very slow or very fast.
Learn more about Mass movement https://brainly.com/question/6068732
#SPJ4
At which type of boundary do lithospheric plates collide? question 7 options: gravitational boundaries contour boundaries convergent boundaries convection boundaries
The correct answer is option C.
The lithospheric plates collide at the a convergent plate boundary.
What are convergent plate boundaries?
Convergent boundaries or convergent plate plate boundaries are the regions where two lithospheric plates or plate tectonics interact with each other.
The phenomenon of lithospheric plates collision occurs at the subduction zones where pone plate moves under the other plate.
In general, as a result of subduction trenches are formed which are several meters in depth.
To put it simply, when two plate tectonic converge with each other, the dense plate slides down the upper less dense plate and results in the formation of trenches also called dipping zones.
If you need to learn more about lithospheric plates click here:
https://brainly.com/question/28203855
#SPJ4
How have industrialization and urbanization changed China?
Check all that apply.
A. They helped the migration from cities to rural areas.
B. They turned China into a world economic power.
C. They transferred wealth to more people.
D. They created more unhealthy and polluted conditions.
Answer:
B. They turned China into a world economic power.
Explanation:
There is no other "Check All that Apply" cause there is not other choice that works best.
PLEASE GIVE BRAINLIEST THANK YOU!!!
They turned China into a world economic power to have industrialization and urbanization changed China. Hence, option B is correct.
What is industrialization and urbanization?Urbanization, defined as the expansion of cities in terms of both population and physical size, was sparked by industrialization, which is defined as manufacturing in factory settings using machines and a work force with distinct, split roles to increase production.
An agrarian economy becomes a manufacturing economy through the process of industrialization. Manual and specialized employees are replaced by assembly lines and mass production. In the past, this process has sparked urbanization by generating economic expansion and employment possibilities that entice people to live in cities.
Urbanization is the process of a rural population moving into an urban location, whereas industrialization is the process of turning any society into an industrial society.
Thus, option B is correct.
For more information about industrialization and urbanization, click here:
https://brainly.com/question/2563024
#SPJ2
which of the following is NOT one of the 5 themes of geography?
a. Movement b. location c. people d. region
The 5 themes of geography people
What are the 5 themes of geography?
Location :- Most geographic studies start with knowing the location of a place. Position can be absolute or relative.Place :- A place represents the human and physical characteristics of a place.Human-environment interaction :- This topic discusses human adaptation and modification of the environment. Humans shape landscapes through their interactions with the land. This has both positive and negative effects on the environment.Movement :- People move - a lot! Moreover, ideas, fads, goods, resources, and communication are all travel distances. This theme examines movement and movement between regions of the worldRegions :- divide the world into manageable units for geographic study. Regions have certain characteristics that unify them and can be formal, functional, or indigenous.Learn more about themes of geography from the link below
https://brainly.com/question/14433647
#SPJ4
How do foreign recessions and depressions affect the Maquiladora industry?
Maquiladoras have not only become an increasingly significant component of the Mexican economy, they are also an important part of U.S. corporate strategy in producing competitively priced goods and services in the world marketplace.
Even though recessions and low-wage competition have changed the behavior of the industry in recent years, maquiladoras continue to shape regional trade along the U.S.-Mexico border.
What is Maquiladora industry?
The term “maquila” or “maquiladora” refers to a manufacturing facility that is a part of the maquiladora industry, a driving force in Mexico manufacturing. Maquiladora in Mexico first operated under a specific government program known as the Maquila Program, created in 1965 to facilitate industrialization on the United States-Mexican border.
A maquiladora is a low-cost manufacturing operation in Mexico that manufactures goods for export to the United States or Canada.
What is recession and depression?
A recession is widespread economic decline that lasts for at least six months. A depression is a more severe decline that lasts for several years. For example, a recession lasts for 18 months, while the most recent depression lasted for a decade. There have been 33 recessions since 1854.
Learn more about maquiladora industry here:
https://brainly.com/question/15022896
#SPJ1