Select the correct answer.
An iron bar at 200°C i placed in thermal contact with an identical iron bar at 120°C in an isolated system. After 30 minutes, both iron bars are at
160°C. the iron bars were placed in thermal contact in an open system instead of an isolated system, how would the results be different?
Assume that the room temperature is 25°C.
O A The temperatures of the iron bars after 30 minutes would be less than 160°C because heat would be lost to the surroundings.
O B. it would take more than 30 minutes for both iron bars reach 160°C because heat would be transferred less efficiently.
O C. The temperatures of both iron bars would increase as they absorb heat from the surroundings.
O D. The temperatures of both iron bars would decrease because pieces of them would be lost to the surroundings.
Reset
Next
© 2021 Edmentumn. All rights reserved.

Option A. Boiling point.

Explanation:

When you heat the water, the water gets converts into gaseous form.

As you know that water is in liquid form. So, when you heat the water, the water molecules absorbs the heat and get dispersed from one another molecules. i.e., molecules go far from the other molecules as they absorbed heat.

The term describes the temperature at which a substance can change state from a liquid to a gas, is boiling point. Therefore, option A is correct.

The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.

Boiling point and saturation temperature are synonyms. Sometimes the measurement's pressure serves as a definition for the boiling point. The International Union of Pure and Applied Chemistry was founded in 1982.

The boiling point of a sample can be calculated using a number of techniques, such as distillation, reflux, and a Thiele tube. The simplest approach makes use of a Thiele tube and has the benefit of requiring less than 0.5mL of substance.

Thus, option A is correct.

To learn more about boiling point, follow the link;

https://brainly.com/question/2153588

#SPJ2

Answer:  The bonds that are made and broken in a reaction release energy when forming products that contain less total energy than the reactants.

Explanation:  Elements form bonds with each other when the total energy of the resulting products is less than the starting energy.  The term "energy" refers to the energy of the electrons that are being held in an atom by the nucleus.  Keeping the positively charged nucleus happy means that the electrons are trying to get closer, but they repel each other as they get closer to the nucleus.  This results in orbits, preferred areas around the nucleus where the electrons spend their day in a delicate balance with the nucleus and other electrons.  These orbits offer housing for the electrons that involve discreet energies for the electrons.  When elements react, the resulting bonding pattern often results in an overall reduction in total energy.  The energy reduction results in heat, light, and/or sound.  The release is termed "exothermic."

Answer:

Pull

Explanation:

The higher the effective nuclear charge, the more the nucleus will be gaining protons. This process makes the electrons to be drawn closer to the positive charge of the nucleus.

Thus, it leads to a greater pull exerted by the nucleus on the added electrons.

Answer:

67.3 kPa

Explanation:

We're focusing on pressure and volume of gases, so we can use our ideal gas law formula PV=nRT. Everything is constant except pressure and volume, but the values change when moving from city 1 to city 2, so we can say PV city 1= PV city 2.

We can simplify our formula to be P1V1=P2V2. This is specifically Boyle's Law, where if pressure increases (from city 1 to city 2) then volume decreases, thus we can say pressure and volume have an inverse/opposite relationship.

This is an important formula to understand, you can easily memorize it by referring to PV=nRT.

Let's plug in the values we know.

P1V1=P2V2

(101)(6) = (9)(V2)

Now let's solve for V2.

[tex]\frac{101 x 6}{9}[/tex]  = V2

[tex]\frac{606}{9}[/tex] = V2

67.3 kPa = V2

A) HCO3- , carbonic acic

Answer:

Explanation:

Equilibrium is achieved in a chemical reaction when there is a steady state with no change in concentrations.

So the answer is "When the concentrations of reactants and products are constant."

Answer:

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we're finding the new pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

We have

[tex]P_2 = \frac{6.4 \times 0.87}{20.5} = \frac{5.568}{20.5} \\ = 0.2716.... \\ \\ = 0.27 \: \: \: atm[/tex]

But

1 atm = 14.7 psi

Then 0.27 atm =

[tex] \frac{14.7 \times 0.27}{1} = 3.969 \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

3.97 psi

Explanation:

Answer:

4.5 × 1015 J

Explanation:

Energy was released through this form of mass.

The energy released if a sample loses 0.05 kg mass through

radioactive decay is  45 ×10¹⁴ J.

The ability to do work is called energy.

The Einstein's formula can be used to find the energy released. Energy is the product of mass  and  the velocity of light in a vacuum squared.

Given that the mass is 0.05 kg and speed of light in vacuum is 3×10⁸ m/s.

E = 0.05 × (3×10⁸)²

E = 45 ×10¹⁴ J

The energy is released if a sample loses 0.05 kg mass through

radioactive decay is 45 ×10¹⁴ J.

Learn more about Energy.

https://brainly.com/question/17858145

#SPJ2

Answer:

In chemistry, an ionic compound is a chemical compound composed of ions held together by electrostatic forces termed ionic bonding

Answer:

An Ionic compounds are compounds consisting of ions also held together by the attractive forces among the oppositely charged ions.

Explanation:

For example :

NaHCO3, sodium bicarbonate (baking soda; used in cooking)

NaCl, sodium chloride (common/ordinary salt)

Answer:

Mechanical Sound Waves

A mechanical wave is a wave that depends on the oscillation of matter, meaning that it transfers energy through a medium to propagate. These waves require an initial energy input that then travels through the medium until the initial energy is effectively transferred. Examples of mechanical waves in nature include water waves, sound waves, seismic waves and internal water waves, which occur due to density differences in a body of water. There are three types of mechanical waves: transverse waves, longitudinal waves, and surface waves.

Why is sound a mechanical wave? Sound waves move through air by displacing air particles in a chain reaction. As one particle is displaced from its equilibrium position, it pushes or pulls on neighboring molecules, causing them to be displaced from their equilibrium. As particles continue to displace one another with mechanical vibrations, the disturbance is transported throughout the medium. These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.

https://www.pasco.com/products/guides/sound-waves

this website tech you about wave, so learn it!!!

Answer:

The raindrops of mass 0.050g has 0.0028 moles of water

Answer:

triangles

Explanation:

Explanation:

Sodium Chloride is neutral whereas hydrochloric acid is an acid. 2. Sodium Chloride is solid while hyrdochloric acid is a gas.

Answer:

5:2

//answer was too short //

Answer:

The ratio by mass for calcium and oxygen in a calcium oxide is given by 5:2

hope it helps

Answer:

35.8 g

Explanation:

Step 1: Given data

Mass of water: 63.5 g

Step 2: Calculate how many grams of KCl can be dissolved in 63.5. g of water at 80 °C

Solubility is the maximum amount of solute that can be dissolved in 100 g of solute at a specified temperature. The solubility of KCl at 80 °C is 56.3 g%g, that is, we can dissolve up to 56.3 g of KCl in 100 g of water.

63.5 g Water × 56.3 g KCl/100 g Water = 35.8 g KCl

Respuesta:

1.50 moles

Explicación:

Paso 1: Escribir la ecuación química ajustada para la descomposición del carbonato de calcio

CaCO₃ ⇒ CaO + CO₂

Paso 2: Calcular los moles correspondientes a 150 g de CaCO₃

La masa molar de CaCO₃ es 100.09 g/mol.

150 g × 1 mol/100.09 g = 1.50 mol

Paso 3: Calcular los moles de CO₂ producidos a partir de 1.50 moles de CaCO₃

La relación molar de CaCO₃ a CO₂ es 1:1.

1.50 mol CaCO₃ × 1 mol CO₂/1 mol CaCO₃ = 1.50 mol CO₂

now that i do and I also believe adopt don't shop and also no puppy mill.

Answer:

D. Black Holes

Explanation:

Black holes are large objects that form dense gravity wells in space. Their gravitational pull is so strong that even light cannot escape it. 

Large objects that form dense gravity wells in space are stars and blackholes. The correct answer is option B and D.

Gravity: it is referred to as force of attraction experienced by a body having mass, towards the center of Earth.

Both stars and black holes are massive objects that exert a significant gravitational force due to their mass. They create what is known as a gravity well, which is a region of space where the gravitational pull is strong enough to affect the motion of nearby objects.

On the other hand, Galaxies and nebulae, are not individual objects with sufficient mass to form dense gravity wells. Galaxies consist of a collection of stars, gas, and dust, and while they have a collective gravitational influence, it is not concentrated in a single massive object like a star or black hole. Whereas, Nebulae are interstellar clouds of gas and dust, which do not possess the mass required to create significant gravity wells.

Therefore, the correct options from the given list that form dense gravity wells in space are B. Star and D. Black holes.

Learn more about Gravity here:

https://brainly.com/question/31321801

#SPJ6

Answer:

Commensalism is a symbiotic relationship in which one species benefits while the other species is not affected. One species typically uses the other for a purpose other than food.

Answer:

Solid

Explanation:

The reason is because the liquid aspirin has a plastic cover with a liquid inside and it doesn't take long for out stomach acid to dissolve the cover unlike the Solid aspirin where is slowly dissolves.

Explanation:

Because a large amount of energy is required to break the strong inter-ionic attraction.

CaS => Ca2+ & S2-

bud but i think

is in it forsure

Explanation:

The higher the wavelength, the lower its frequency and energy

Answer:

As frequency increases wavelength decreases in size

Explanation:

The wavelength of the wave is inversely proportional to the frequency of the wave as the speed of the wave remains constant.

                                v = fλ ( v - speed, f - frequency,  -wavelength)

                                 [tex]\frac{v}{\lambda}[/tex] = f

Therefore at constant speed:

                                 f ∝ [tex]\frac{1}{\lambda}[/tex] (inversely proportional)

Answer:

dbdbdbdjdbdjdb zbdjdjdjdirfjfjrjdudhdhdhd

Answer:

Explanation:

Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions.

Plz mark me brainliest.

Answer:

Solution given:

2 Al + 3 H2SO4 – Al2(SO4)3 + 3H2

2mole +3mole. --- 1 mole + 3 mole

27×2g. +3×98g-------- 342,g. + 6g

we have

2 mole of Al gives. 6g of h2

5 moles of Al gives 6/2×5=15g of hydrogen

15 g is your answer

Answer:

Have Nice Day

Explanation:

2NaCI is the answer

Answer:

1162m/s is the faster speed

Explanation:

The speed is a physical property defined as the distance travelled of an object in determined amount of time.

A speed of 316m/s means the object is travelling 316 meters per second transcurred.

In the same way, the speed of 1162m/s means the object is travelling 1162m per second.

As the second object is travelling more distance per second than the first,

Answer:

D.make a plant cell rigid

Explanation:

Cell wall is present only in a plant cell. Option A, B & C are functions of the cell membrane not the cell wall.

[tex] \infty [/tex]

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]

D.make a plant cell rigid