Answer:
Average speed= 0.4 m/sExplanation:
step one:
simply put average speed is defined as the total distance travelled divided by the total time taken.
step two:
given data
total distance is the distance from where she started to the store
which is 100 m
also, we are told that the total time taken is 250 seconds
step three:
Hence we can compute the average speed as
average speed= 100/250
average speed= 0.4 m/s
Protons are launched with an initial speed 9550 m/s at 37° above the horizontal, into a region where a uniform vertical electric field is present. The protons hit a target at a horizontal distance 1.27 mm from the point where the protons are launched. Find the electric field, the time of flight, and the maximum height reached by the protons above the point where they were launched.
Answer:
E=720,5 N/C
H=0,24mm
Explanation:
Do you think a hurricane can be considered to be a heat machine? Why?
Answer:
No
Explanation:
Hurricanes always do not bring heat. For example, Hurricane Sandy brought snow.
A satellite in outer space is moving at a constant velocity of 21.4 m/s in the y direction when one of its onboard thruster turns on, causing an acceleration of 0.250 m/s2 in the x direction. The acceleration lasts for 45.0 s, at which point the thruster turns off. (a) What is the magnitude of the satellite's velocity when the thruster turns off
Answer:
a) The magnitude of the satellite's velocity when the thruster turns off is approximately 24.177 meters per second.
b) The direction of the satellite's velocity when the thruster turns off is approximately 62.266º.
Explanation:
Statement is incomplete. The complete description is now described below:
A satellite in outer space is moving at a constant velocity of 21.4 m/s in the y direction when one of its onboard thruster turns on, causing an acceleration of 0.250 m/s2 in the x direction. The acceleration lasts for 45.0 s, at which point the thruster turns off.
(a) What is the magnitude of the satellite's velocity when the thruster turns off
(b) What is the direction of the satellite's velocity when the thruster turns off? Give your answer as an angle measured counterclockwise from the +x-axis. ° counterclockwise from the +x-axis
Let be x and y-directions orthogonal to each other and the satellite is accelerated uniformly from rest in the +x direction and moves at constant velocity in the +y direction. The velocity vector of the satellite ([tex]\vec{v}_{S}[/tex]), measured in meters per second, is:
[tex]\vec{v}_{S} = (v_{o,x}+a_{x}\cdot t)\,\hat{i}+v_{y}\,\hat{j}[/tex]
Where:
[tex]v_{o,x}[/tex] - Initial velocity in +x direction, measured in meters per second.
[tex]a_{x}[/tex] - Acceleration in +x direction, measured in meter per square second.
[tex]t[/tex] - Time, measured in seconds.
[tex]v_{y}[/tex] - Velocity in +y direction, measured in meters per second.
If we know that [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]a_{x} = 0.250\,\frac{m}{s^{2}}[/tex], [tex]t = 45\,s[/tex] and [tex]v_{y} = 21.4\,\frac{m}{s}[/tex], the final velocity of the satellite is:
[tex]\vec{v}_{S} = \left[0\,\frac{m}{s}+\left(0.250\,\frac{m}{s^{2}} \right)\cdot (45\,s) \right]\,\hat{i}+\left(21.4\,\frac{m}{s} \right)\,\hat{j}[/tex]
[tex]\vec{v_{S}} = 11.25\,\hat{i}+21.4\,\hat{j}\,\,\left[\frac{m}{s} \right][/tex]
a) The magnitud of the satellite's velocity can be found by the resource of the Pythagorean Theorem:
[tex]\|\vec {v}_{S}\| = \sqrt{\left(11.25\,\frac{m}{s} \right)^{2}+\left(21.4\,\frac{m}{s} \right)^{2}}[/tex]
[tex]\|\vec{v}_{S}\| \approx 24.177\,\frac{m}{s}[/tex]
The magnitude of the satellite's velocity when the thruster turns off is approximately 24.177 meters per second.
b) The direction of the satellite's velocity when the thruster turns off is determined with the help of trigonometric functions:
[tex]\tan \alpha = \frac{v_{y}}{v_{x}} = \frac{21.4\,\frac{m}{s} }{11.25\,\frac{m}{s} }[/tex]
[tex]\tan \alpha = 1.902[/tex]
[tex]\alpha = \tan^{-1}1.902[/tex]
[tex]\alpha \approx 62.266^{\circ}[/tex]
The direction of the satellite's velocity when the thruster turns off is approximately 62.266º.
How did oxygen get into the earths atmosphere in its early days? plz explain
Answer:
The answer is tiny organisms known as cyanobacteria, or blue-green algae. These microbes conduct photosynthesis: using sunshine, water and carbon dioxide to produce carbohydrates and, yes, oxygen. In fact, all the plants on Earth incorporate symbiotic cyanobacteria (known as chloroplasts) to do their photosynthesis for them down to this day.
Explanation:
Suppose a wheel with a tire mounted on it is rotating at the constant rate of 3.273.27 times a second. A tack is stuck in the tire at a distance of 0.365 m0.365 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: m/sm/s What is the tack's centripetal acceleration?
Answer:
The tangential speed is [tex]v = 7.5 m/s [/tex]
The centripetal acceleration is [tex]a = 154 \ m/s^2[/tex]
Explanation
Generally the angular velocity is mathematically represented as
[tex]w = e * \frac{ 2 \ pi \ rad }{s}[/tex]
substituting 3.27 rev/s for e we have that
[tex]w = 3.27 * \frac{ 2 \ pi \ rad }{s}[/tex]
=> [tex]w = 20.55 \ rad /s[/tex]
The tangential speed is mathematically represented as
[tex]v = w * r[/tex]
substituting 0.365 m for r we have that
[tex]v = 20.55 * 0.365 [/tex]
=> [tex]v = 7.5 m/s [/tex]
Generally the centripetal acceleration is mathematically represented as
[tex]a = \frac{v^2}{r}[/tex]
=> [tex]a = \frac{7.5^2}{ 0.365}[/tex]
=> [tex]a = 154 \ m/s^2[/tex]
How fast does the moon rotate around the Earth?
The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis. As a result, the moon does not seem to be spinning but appears to observers from Earth to be keeping almost perfectly still.
Answer:
approximately 27 days
The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis.
Explanation:
what is alpha decay?
Answer:Alpha decay, type of radioactive disintegration in which some unstable atomic nuclei dissipate excess energy by spontaneously ejecting an alpha particle.
Explanation:
Which wavelength of light is NOT absorbed by riboflavin?
Answer:
525 nm and 550nm
Explanation:
The absorption spectrum of any compound is a plot of absorption against wavelength. Sometimes, the absorption is plotted against frequency or wave number. This plot appears as humps. The peak of the highest hump is the wavelength of maximum absorption. The concentration of each solution may be indicated above the hump when the instrument is calibrated using different concentrations of the analyte.
The absorption spectrum of riboflavin indicates that its wavelength of maximum absorption is 450nm and it does not absorb at light 525 nm and 550nm wavelengths respectively.
A baseball pitcher's average fastball pitch speed is 98.6 mph. What is that speed in
m/s?
Answer:
44.078 m/s
Explanation:
convert 98.6 miles to meters then convert the hour to minutes and minutes to seconds
How does an electrometer differ from a voltmeter? What is meant by an electrical ground? What must you do before each measurement in this experiment and why?
Answer:
n an electrometer, it is built in such a way that its resistance in parallel is extremely high
Ground in a circuit is a reference point from which voltages are measured
all the instruments must be grounded and we must ground ourselves
Explanation:
When you build a voltmeter you have a resistance in parallel with the galvanometer, therefore when measuring the voltage of a circuit, so that there is no effect (load effect) by the voltmeter, a resistance must be much greater than the resistance where it is is measuring.
In an electrometer, it is built in such a way that its resistance in parallel is extremely high in the order of 10¹²Ω, so its load effect is very small and can be measured with high resistance mu
Electric ground in home and industrial installations is a protection system consisting of a metal piece connected to a buried ground electrode.
Ground in a circuit is a reference point from which voltages are measured and is common to all parts of the circuit
In an experiment where an electrometer is used, all the instruments must be grounded and we must ground ourselves, since it must be an instrument where very small voltages are measured at high impedances.
Father drove 176 km in 7 hours. For the first 92 km, he spent
for 4 hours. What was his average speed for the remaining
journey?
km/h
Answer:
28km/h
Explanation:
92km = 4 hours
176 - 92 = 84
84km = 3 hours
84/3 = 28
28km/h
Hopefully this helps you :)
pls mark brainlest ;)
why is evidence good for practice
Answer:
HEYO BRO! (my bad for da caps)
Explanation:
Evidence-based practice (EBP) is the idea that occupational practices ought to be based on scientific evidence. That at first sight may seem to be obviously desirable, but the proposal has been controversial.
Happy to Help From, Adam
Derrick crawls 4 feet south, and then turns east and crawls 6 feet.
What distance did he cover?
What was his displacement?
Displacement is a vector quantity. The distance and displacement of the given object are 10 ft and 7.07 ft respectively.
Distance:
It can be defined as the change in position of the object. It is a scalar quantity.
Displacement = 4+6
Displacement = 10 ft
Displacement:It can be defined as the vector change in position overall change in position.It is a vector quantityVector quantity is the quantities that have both magnitude and direction.[tex]\rm Dislacement =\sqrt { 4^2 +6^2}\\\\ \rm Dislacement = 7.07 ft[/tex]
Therefore, the distance and displacement of the given object are 10 ft and 7.07 ft respectively.
Learn more about Displacement:
https://brainly.com/question/10919017
What would the American flag look like under a blue light?
Answer:
The flag will appear to be black.
Explanation:
This is because red is the only brighter color in the American flag, so when a blue light is shined, the red turns dark and then the flag looks just blank and black.
Answer:
As red light falls on a blue surface, it absorbs the red light and no light will be reflected back. Thus, the object appears to be black. When the flag is illuminated by red light, the red and white stripes of the flag will appear solid red, the stars will appear red, and the blue portion will appear black.
The various types of tree sloths share the honor of being the slowest-moving
mammals. An average tree sloth moves with a speed of 0.743 m/s. How long does it
take a sloth moving at this speed to travel 22.30 m?
Answer:
16.568 Minutes
Explanation:
Time = speed (m/s) x distance (m)
Scientific notation: Convert 7.1 x 10-3 to decimal notation.
Answer: hey
your answer is gonna be
71000.
Explanation:
Two point charges are on the x-axis. One charge, q1 = 10 nC, is located at the origin, and the othercharge, q2 = 18 nC, is located at x = 9.0 m. What is the force on q2?a) 20 nN in the positive x-directionb) 20 pN in the positive x-directionc) 20 nN in the negative x-directiond) 20 pN in the negative x-directione) 180 nN in the positive x-direction
Answer:
The correct option is A
Explanation:
Generally the force on [tex]q_2[/tex] is mathematically represented as
[tex]F_2 = \frac{ k * q_1 * q_2 }{ x^2}[/tex]
here k is the coulombs constant with value [tex]k = 9*10^{9}\ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex]
=> [tex]F_2 = \frac{ 9*10^{9} * 10*10^{-9} * 18*10^{-9} }{ 9^2}[/tex]
=> [tex]F_2 = 2*10^{-8} \ N[/tex]
=> [tex]F_2 = 20*10^{-9} \ N[/tex]
=> [tex]F_2 = 20nN[/tex]
The direction is in the positive x-axis because both charge are of the same polarity so the will repel hence [tex]q_2[/tex] will move toward the positive x-axis
Ricardo finds an online site about the gas laws. The site shows the equation below for Charles’s law. What change would correct the error on the site? “Charles’s law” should read “Gay-Lussac’s law,” which explains changes in volume and temperature. The symbol for T2 should be smaller than for T1 because if volume increases, then temperature should decrease. Each T should be replaced by a P in the equation because Charles’s law describes changes in volume and pressure. The volume should be divided by temperature on each side of the equation.
Answer:
D. The volume should be divided by temperature on each side of the equation.
Explanation:
Charles's Law is [tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex].
Answer:
The volume should be divided by temperature on each side of the equation.
Explanation:
When a piece of paper is held with one face perpendicular to a uniform electric field the flux through it is 25 N .m2 /C. When the paper is turned 25° with respect to the field the flux through it is:_____.1. 02. 12 N .m2 /C3. 21 N .m2 /C4. 23 N .m2 /C5. 25 N .m2 /CB. A charged point particle is placed at the center of a spherical Gaussian surface. The electric flux is changed if:______.1. the sphere is replaced by a cube of the same volume2. the sphere is replaced by a cube of one-tenth the volume3. the point charge is moved off center (but still inside the original sphere)4. the point charge is moved to just outside the sphere5. a second point charge is placed just outside the sphereC. A charge of 0.8 × 10−9 C is placed at the center of a cube that measures 5 m along each edge. What is the electric flux through any 2 faces of the cube?
Answer:
1) 23 N.m²/C
2) The point charge is moved just outside the sphere
3) 30 N.m²/C
Explanation:
1) The flux through the field can be gotten by finding the dot product of the angle the later is turned, and the given uniform electric field.
25 * cos 25 =
25 * 0.9063 =
22.66 or approximately, 23 N.m²/C
2) The point charge is moved just outside the sphere
3) Using Gauss' Law, the electric flux through one face of the cube is given as Φ = Q / 6ε₀, thus,
Φ = 0.8*10^-9 / 6 * 8.85*10^-12
Φ = 0.8*10^-9 / 5.311*10^-11
Φ = 15 N.m²/C
And therefore, the flux through any 2 faces of the cube is 2 * 15 = 30 N.m²/C
Nami conducts an investigation on plants. She places a grow light on a timer to give the plants different amounts of light to see if this would affect their growth. Which term describes the amount of light in this investigation?
Answer:
It is independent variable
Explanation:
Answer:
D!!!!!
Explanation:
edge 2021!
Does the US use the metric system? Please Only Real Answers Like Yes Or No Or yes because...... no because...... Thank You
Answer:
No
Explanation: It is the only country that does not. Hope this helped :)
Part A
What is the magnitude of the momentum of a 0.0073-kg marble whose speed is 0.65 m/s?
Express your answer to two significant figures and include appropriate units.
Part B
What is the speed of a 0.136-kg baseball whose momentum has a magnitude of 3.14 kg⋅m/s?
Express your answer to two significant figures and include appropriate units.
Answer:
(A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
Explanation:
Given that,
Mass of marble = 0.0073 kg
Speed = 0.65 m/s
(A). We need to calculate the magnitude of the momentum of the marble
Using formula of momentum
[tex]p = mv[/tex]
Where, m = mass
v = velocity
Put the value into the formula
[tex]p=0.0073\times0.65[/tex]
[tex]p=0.004745\ kg m/s[/tex]
(B). Mass of baseball = 0.136 kg
Momentum of baseball = 3.14 kg m/s
We need to calculate the speed of baseball
Using formula of momentum
[tex]p=mv[/tex]
[tex]v=\dfrac{p}{m}[/tex]
Put the value into the formula
[tex]v=\dfrac{3.14}{0.136}[/tex]
[tex]v=23.0\ m/s[/tex]
Hence, (A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north
from the bus stop to the museum entrance. What is your displacement?
The direction of movement of the body or item is defined by velocity. Your total displacement will be 684 meters.
What is Velocity?The direction of movement of the body or item is defined by velocity. Speed is fundamentally a scalar number. Velocity is, in essence, a vector quantity. It is the pace at which distance changes. It is the displacement rate of change.
Given that It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north from the bus stop to the museum entrance.
Time = 9.5 minutes = 9.5 × 60 seconds = 570 seconds
Average Velocity = 1.2 m/s
Now, the displacement made by you can be written as,
Velocity = Displacement / Time
1.2 m/sec = Displacement / 570 seconds
Displacement = 1.2 m/sec × 570 seconds
Displacement = 684 meter
Hence, your total displacement will be 684 meters.
Learn more about Velocity here:
https://brainly.com/question/18084516
#SPJ2
One of the specific goals of of environmental analysis is:____________
a: To provide organized information, for the development of the organization's internal analysis, mission, vision , values and strategy.
b: To measure organizational efficiency.
c: To ignore minor competitors.
d: To develop a list of "one-word: descriptions of the external environment.
Answer:
a: To provide organized information, for the development of the organization's internal analysis, mission, vision, values, and strategy.
Explanation:
Environmental analysis is a process in business wherein the internal and external factors that can affect a business are examined so as to help improve the organization's goals and strategies. The internal analysis serves as a guide to checkmate the organization and to see if they have adopted the right strategies that suit their external environment.
Competitors in the external environment can have a huge impact on the business. So the internal workings of the organization should align with the external factors. The organized information would also be useful in forecasting the growth of the business.
HELP!!!
An arrow is shot into the air at an angle of 30.0 above the horizontal with a speed of 20.0 m/s. What are the x and y components of the
velocity of the arrow 1.0 s after it leaves the bowstring?
Answer:
Y(1s) = [tex]10\sqrt{3}[/tex] - 10.1
X(1s) = 10m/s
Explanation:
In annex I've done the explanation for the equations that I will just present here.
Assuming that the arrow stars from the position (0 ; 0) in the Cartesian Graphic, and with Xo and Yo the initial speeds:
[tex]Yo =\frac{\sqrt{3} }{2} . Vr\\Yo = \frac{\sqrt{3} }{2} . 20\\Yo = 10\sqrt{3} m/s \\Xo = \frac{1}{2} Vr\\Xo = 10m/s[/tex]
Ignoring friction with air, Xo = Xf
So, Xo is the same during all the movement.
X(1s) = 10m/s
For Yo is different. That component is suferring reductions from gravity.
We can find Yo(1s) with one the basic functions of cinematics:
Vf = Vo + at
Vf = Final Velocity
Vo = Start Velocity
a = aceleration - gravity (g) is negative here
t = time
Yf = Yo + gt
Yf = [tex]10\sqrt{3}[/tex] - 10.1
If you prefere, can be: Yf = 10. ([tex]\sqrt{3} - 1[/tex])
6. What is Mass????????????????
What is the net force acting on the box?
0 285 N
0 185 N
SN
0 85 N
0 65 N
Answer:
the answer would be D 65N
Explanation:
just got it correct on EDG
What must be the acceleration of a train in order for it to stop from 12m/s in a distance of 541m?
Please help!!
Answer:
The acceleration of the train must be - 0.133 m/s²
Explanation:
A train in order for it to stop 12 m/s in a distance if 541 m
That means the initial velocity of the train is 12 m/s
Its final velocity is zero (stop)
The distance it covers is 541 m
P.S. This is part of the answer of another brainly user this is not my knowledge.
But Hope I helped you
Answer:
-0.133 m/s²
Explanation:
Given:
Δx = 541 m
v₀ = 12 m/s
v = 0 m/s
Find: a
v² = v₀² + 2aΔx
(0 m/s)² = (12 m/s)² + 2a (541 m)
a = -0.133 m/s²
6
Following an inelastic collision, what can kinetic energy be converted into? Check all that apply.
heat
impulse
momentum
potential energy
sound
Mark this and return
Save and Exit
Next
Submit
Answer:
Heat, potential energy, and sound.
Explanation:
Edgenuity says so
The characteristics of the inelastic shocks allow to find the correct answers of in which the kinetic energy can be transformed are:
Heat Potential energy Sound.
In a collision the total momentum of the system is conserved, this is an important principle of physics, we have two types of collisions:
Elastic. In this case the kinetic energy of the system is conserved. Inelastic. In this case the initial kinetic energy is not conserved.
In inelastic collision, part of the energy of the movement is transformed into potential energy of configuration of the system.
Let's analyze the different answers:
a) Heat.
True. Heat is a form of energy that, due to the change in the relative friction motion of bodies, is one of the greatest sources of transformation of energy into configuration power energy.
b) Impulse.
False. The impulse is the change of the momentum of the system and this is conserved, therefore the momentum is also conserved.
c) Momentum
False. Momentum is preserved in all crashes.
d) Potential energy.
True. Power energy is a configuration energy, therefore kinetic energy can be transformed into potential energy.
e) The sound.
True. Sound is a wave that carries energy, therefore kinetic energy can be transformed into traveling sound waves.
In conclusion, using the characteristics of inelastic shocks, we can find the correct answers that the kinetic energy can be transformed into are:
Heat Potential energy Sound.
Learn more here: brainly.com/question/24616147
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) W
Complete question is;
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) What is the amplitude of each wave
Answer:
A) Period = 4 s
B) Frequency = 0.25 Hz
C) Amplitude = 0.3 m
Explanation:
A) We are told that the distance it takes for the boat to travel from its highest to its lowest point is 2 s.
Thus, t = 2 s
Now, in waves, period (T) it the time between two successive waves.
This means that;
T = 2t
T = 2 × 2
T = 4 s
B) Also, the frequency(f) is given by the formula;
f = 1/T
f = 1/4
f = 0.25 Hz
C) We are given a vertical distance of 0.60 m from highest to lowest point of waves.
Now, amplitude is half of this distance.
Thus;
Amplitude(A) = 0.6/2
A = 0.3 m