Reyesburg Corporation is contemplating using a new, more expensive glue in the construction of its laminated veneer lumber. Of importance to the company is
the carrying load of the lumber. The company has tested 34 beams using the new glue, recording for each beam the pressure (in pounds per square foot) at
which the beam breaks. The data collected are presented in the following frequency distribution.
Carrying load
(in pounds per square foot)
860 to 879
880 to 899
900 to 919
920 to 939
940 to 959
Frequency
5
9
12
6
2
Based on the frequency distribution, using the midpoint of each data class, estimate the mean carrying load of the beams tested. For your intermediate
computations, use four or more decimal places, and round your answer to one decimal place.

Answers

Answer 1

Based on the given frequency distribution, the estimated mean carrying load of the beams tested is approximately 904.2 pounds per square foot.

Estimate the mean carrying load of the beams tested.

To estimate the mean carrying load of the beams tested, we need to find the weighted average of the midpoints of each data class.

First, we need to find the midpoint of each class interval. We can do this by taking the average of the lower and upper limits of each interval:

Midpoint of 860 to 879 = (860 + 879) / 2 = 869.5

Midpoint of 880 to 899 = (880 + 899) / 2 = 889.5

Midpoint of 900 to 919 = (900 + 919) / 2 = 909.5

Midpoint of 920 to 939 = (920 + 939) / 2 = 929.5

Midpoint of 940 to 959 = (940 + 959) / 2 = 949.5

Next, we can find the weighted average of these midpoints, using the frequencies as weights. We can set up a table to organize our calculations:

Data class Midpoint Frequency Midpoint x Frequency

860-879           869.5                5                  4,347.5

880-899           889.5         9                         8,005.5

900-919           909.5         12                        10,914

920-939           929.5          6                         5,577

940-959            949.5          2                          1,899

Total                          34                       30,743.5

To find the weighted average, we divide the sum of the products in the last column by the total frequency:

Weighted average = Sum of (Midpoint x Frequency) / Total frequency

Weighted average = 30,743.5 / 34

Weighted average ≈ 904.2

Therefore, based on the given frequency distribution, the estimated mean carrying load of the beams tested is approximately 904.2 pounds per square foot.

to know more about frequency

brainly.com/question/5102661

#SPJ1


Related Questions

The diagram shows a field. 66 m 140 m 102 m Work out the area of the field.​

Answers

The area of the field, given that it is a trapezium, would be 7, 986 m ² .

How to find the area ?

The field is in the shape of a trapezium which means that the area of the field can be found by the formula :

= ( a + b ) / 2 x height

Side a = 102 m

Side b = 140 m

height = 66 m

The area of the field is therefore:

= ( 102 + 140 ) / 2 x 66

= 121 x 66

= 7, 986 m ²

In conclusion, the area of the field is 7, 986 m ².

Find out more on area at https://brainly.com/question/1463152

#SPJ1

How is the product of a complex number and a real number represented on the complex plane?

Consider the product of 2−4i and 3.

Drag a value or phrase into each box to correctly complete the statements

Answers

Answer:

2 root 5

6 root 5

are the same

Step-by-step explanation:

Answer:

[tex]2\sqrt{5} \\6\sqrt{5}[/tex]

are the same

Step-by-step explanation:

Please help asap!!!!!

Answers

Answer:

[tex]f(-1) = -2\\[/tex]

[tex]f(0)=0[/tex]

[tex]f(1)=2[/tex]

Step-by-step explanation:

f(x)=2x

1) f(-1) = 2(-1) = -2

2) f(0) = 2(0) = 0

3)  f(1) = 2(1) = 2

Determine the function is positive, negative, increasing, or decreasing. Then describe the end behavior of the function.

Answers

The function is positive and increasing.

Given is an exponential function y = √4x,

So, since all the value of the function will be above x-axis therefore, the function is positive.

Now,

Differentiating the function,

y' = d(√4x)/dx

y' = 1/2 × [tex]4x^{-1/2[/tex]

y' = 1/2√4x

y' = 1/4√x

Since, y' > 0, therefore, the function is increasing.

Now,

For functions with exponential growth, we have the following end behavior.

The end behavior on the left (as x → -∞), it has a horizontal asymptote at y = 0,

The end behavior on the right (as x → ∞), y→ ∞.

Learn more about exponential function click;

https://brainly.com/question/14355665

#SPJ1

Help!!

You flip a coin and roll a dice. The resultant outcome table where H means heads, T means Tails, and the number represents what number was rolled on the dice. The outcome list is as follows: Coin Toss H H H H H H TTTTTT Die Roll 1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 What is the probability that the coin reads heads or tails and the dices number is less than or equal to 6?​

Answers

The probability that the coin reads heads or tails and the dices number is less than or equal to 6 is 1/3 or approximately 0.333.

How to calculate the probability that the coin reads heads or tails and the dices number is less than or equal to 6?​

There are 12 possible outcomes in the table where the coin reads heads or tails and the dice roll is less than or equal to 6. These are:

Coin Toss: H, Die Roll: 1

Coin Toss: H, Die Roll: 2

Coin Toss: H, Die Roll: 3

Coin Toss: H, Die Roll: 4

Coin Toss: H, Die Roll: 5

Coin Toss: H, Die Roll: 6

Coin Toss: T, Die Roll: 1

Coin Toss: T, Die Roll: 2

Coin Toss: T, Die Roll: 3

Coin Toss: T, Die Roll: 4

Coin Toss: T, Die Roll: 5

Coin Toss: T, Die Roll: 6

Out of these 12 outcomes, 6 have the coin reading heads and 6 have the coin reading tails. So, the probability that the coin reads heads or tails and the dice number is less than or equal to 6 is:

P(heads or tails and dice number <= 6) = P(heads and dice number <= 6) + P(tails and dice number <= 6)

= 6/36 + 6/36

= 12/36

= 1/3

Therefore, the probability is 1/3 or approximately 0.333.

Learn more about probabilities at  https://brainly.com/question/24756209

#SPJ1

The length of a rectangle is 4 meters less than 3 times the width. The perimeter is 24 meters. Find the width

Answers

Answer:

Step-by-step explanation: length of a rectangle is 4 meters less than 3 times the width so we can write L = 3W-4

The formula for the perimeter of a rectangle: P = 2L+2W

Now plug the numbers: P = 2(3W-4)2W

                                        24 = 6W - 8 +2W

                                         24 = 8W - 8

                                         32 = 8W

                                          W = 4

A television show conducted an experiment to study what happens

Answers

Answer:

Step-by-step explanation:

[tex]H_o: p = 0.5,H_1:p\neq 0.5[/tex]

[tex]p(\text{buttered side down})=\frac{19}{51}[/tex]

[tex]\pi _o=0.5\\n=51[/tex]

[tex]z=\frac{p-\pi _o}{\sqrt{\frac{\pi _o(1-\pi _o)}{n} } } =\frac{\frac{19}{51}-0.5 }\sqrt{{\frac{0.5(1-0.5)}{51} } }[/tex]

≈ [tex]-1.82[/tex]

a = 0.01    [tex]z_a/z=2.58\\|z| < |z_[ay}}_2|[/tex]

Thus, it cant reject H₀

The toast will land with the buttered side down 50% of the time.

{Hypothesis test}

part B write a numerical expression of angle C

Answers

The index of refraction of the second material is 1.27.

We are given that;

Angle= 59°

Randomized Variables 1 = 1.47θ1 = 59°θ2 = 69°

Now,

To find n2, we can rearrange Snell’s law as:

n2 = n1 sin θ1 / sin θ2

Plugging in the given values, we get:

n2 = 1.47 sin 59° / sin 69°

n2 = 1.47 (0.857) / (0.934)

n2 = 1.27 (rounded to two decimal places)

Therefore, by the expression the answer will be 1.27

To know more about an expression follow;

brainly.com/question/19876186

#SPJ1

320.041 - 47.96 multiple it for me

Answers

Answer:

320.041 - 47.96 = 272.081

Step-by-step explanation:

I need more information on what you want me to do.

Do you want me to:

Multiply 320.041 by 47.96?

Subtract 47.96 from 320.041?

Multiply the difference between 320.041 and 47.96 by 47.96?

Multiplying 320.041 by 47.96 gives 152,399.6896.

Subtracting 47.96 from 320.041 gives 272.08.

Multiplying the difference between 320.041 and 47.96 by 47.96 gives 13049.0048.

Please answer this question quickly

FOR 35 POINTS
I WILL GIVE BRAINLIEST

Answers

Answer: 0

Step-by-step explanation:

[tex]log_{3} log_{5} log_{2} 32[/tex]

Let's evaluate    

[tex]log_{2}32[/tex]   this is the same as

[tex]2^{x}=32[/tex]       2*2*2*2*2=32  

or

you can think of it as 2 to the what power is 32

so x=5

now substitute that in for [tex]log_{2}32[/tex]

[tex]log_{3} log_{5} 5[/tex]

Now evaluate   [tex]log_{5}5[/tex]

5 to the what power is 5

=1

substitute into [tex]log_{3} log_{5} 5[/tex]

[tex]log_{3} 1[/tex]

3 to the what power is 1

=0

Anything to the 0 power is 1 (it's a rule)

Lee watches TV for 2 hours per day. During that time, the TV consumes 150 watts per hour. Electricity costs (18 cents)/(1 kilowatt-hour). How much does Lee's TV cost to operate for a month of 30 days?

Answers

If the TV consumes 150 watts per hour and electricity costs (18 cents)/(1 kilowatt-hour), it would cost Lee $1.62 to operate his TV for a month of 30 days.

To calculate the cost of operating Lee's TV for a month of 30 days, we need to determine the total amount of electricity used by the TV in that period.

First, we need to calculate the total number of hours Lee watches TV in a month:

2 hours/day x 30 days = 60 hours

Next, we need to calculate the total electricity consumed by the TV:

150 watts/hour x 60 hours = 9,000 watt-hours or 9 kilowatt-hours (kWh)

Now, we can calculate the cost of operating the TV for a month:

9 kWh x $0.18/kWh = $1.62

To learn more about costs click on,

https://brainly.com/question/20554561

#SPJ1

If the TV consumes 150 watts per hour and electricity costs (18 cents)/(1 kilowatt-hour), it would cost Lee $1.62 to operate his TV for a month of 30 days.

To calculate the cost of operating Lee's TV for a month of 30 days, we need to determine the total amount of electricity used by the TV in that period.

First, we need to calculate the total number of hours Lee watches TV in a month:

2 hours/day x 30 days = 60 hours

Next, we need to calculate the total electricity consumed by the TV:

150 watts/hour x 60 hours = 9,000 watt-hours or 9 kilowatt-hours (kWh)

Now, we can calculate the cost of operating the TV for a month:

9 kWh x $0.18/kWh = $1.62

To learn more about costs click on,

https://brainly.com/question/20554561

#SPJ1

7
An acceleration of 2.5 miles per hour per second
mi/hr
S
feet per hour per second
is closest to which of the following values, in
(1 mile = 5,280 feet)
A) 13,200
B) 2,112
C) 220
D)
1/2,112

Answers

The converted acceleration in feet per hour per second is 13200 feet per hour per second

Converting the acceleration from miles per hour per second to feet per hour per second

From the question, we have the following parameters that can be used in our computation:

Acceleration = 2.5 miles per hour per second

From the question, we have

(1 mile = 5,280 feet)

Substitute the known values in the above equation, so, we have the following representation

Acceleration = 2.5 * 5,280 feet per hour per second

Evaluate the products

So, we have

Acceleration = 13200 feet per hour per second

Hence, the acceleration = 13200 feet per hour per second

Read more about rate at

https://brainly.com/question/24178013

#SPJ1

Need some help with this khan academy question, thanks.

Answers

The relative frequency of the two frequency table is completed as below

                               less than 2 years    2 or more years      row total

college degree           0.26                         0.74                     1.00

no coll degree             0.70                          0.30                     1.00

How to fill the table

The relative frequency table is filled by comparing the values as below

                               less than 2 years    2 or more years      row total

college degree              5/19                       14/19                     1.00

no coll degree                16/23                     7/23                     1.00

The row total

5 + 14 = 19 so we have 5/19 (0.26) and 14/19 (0.74)

16 + 7 = 23 o we have 16/23 (0.70) and 7/23 (0.30)

Learn more about relative frequency at

https://brainly.com/question/3857836

#SPJ1

2.1. Consider the following pattern. 2.1.1 complete the table. (match-sticks were used to make each shape) (6marks) Shape No. of match-sticks Rule 1 4 2 7 3 10 4 13 6 241 10 40 43 21 82​

Answers

The rule for this pattern is:

Number of matchsticks = 3n + 1, where n is the shape number.

Using this rule, we can complete the table as follows:

Shape | No. of match-sticks
--- | ---
1 | 4
2 | 7
3 | 10
4 | 13
5 | 16
6 | 19
7 | 22
8 | 25

Therefore, the completed table is:

Shape | No. of match-sticks
--- | ---
1 | 4
2 | 7
3 | 10
4 | 13
5 | 16
6 | 19
7 | 22
8 | 25

60. What is the slope of a line that passes through the point (-1, 1) and is parallel to a line that passes through
(3, 6) and (1,-2)?

Answers

The equation of the line that passes through the point (-1, 1) and is parallel to a line that passes through (3, 6) and (1, -2) is: [tex]$y = 4x + 5$[/tex].

What is slope?

The slope of a line is a measure of its steepness, and is calculated as the change in the y-coordinate divided by the change in the x-coordinate.

In this case, the line passing through the points (3, 6) and (1, -2) has a slope of [tex]$\frac{6 - (-2)}{3 - 1} = \frac{8}{2} = 4$[/tex].

Therefore, the line that passes through the point (-1, 1) and is parallel to the given line has the same slope of 4.

To find the equation of the line passing through (-1, 1) and having a slope of 4, we need to use the point-slope formula.

The point-slope formula is given by: [tex]$y - y_1 = m(x - x_1)$[/tex] where [tex]$(x_1, y_1)$[/tex] is a point on the line, and m is the slope of the line. In this case, [tex]$(x_1, y_1)$[/tex] is (-1, 1) and m is 4, so the equation of the line is:

[tex]$y - 1 = 4(x - (-1))$[/tex]

[tex]$y - 1 = 4x + 4$[/tex]

[tex]$y = 4x + 5$[/tex]

Therefore, the equation of the line that passes through the point (-1, 1) and is parallel to a line that passes through (3, 6) and (1, -2) is: [tex]$y = 4x + 5$[/tex].

For more questions related to coordinate

https://brainly.com/question/29660530

#SPJ1

The equation of the line that passes through the point (-1, 1) and is parallel to a line that passes through (3, 6) and (1, -2) is: [tex]$y = 4x + 5$[/tex].

What is slope?

The slope of a line is a measure of its steepness, and is calculated as the change in the y-coordinate divided by the change in the x-coordinate.

In this case, the line passing through the points (3, 6) and (1, -2) has a slope of [tex]$\frac{6 - (-2)}{3 - 1} = \frac{8}{2} = 4$[/tex].

Therefore, the line that passes through the point (-1, 1) and is parallel to the given line has the same slope of 4.

To find the equation of the line passing through (-1, 1) and having a slope of 4, we need to use the point-slope formula.

The point-slope formula is given by: [tex]$y - y_1 = m(x - x_1)$[/tex] where [tex]$(x_1, y_1)$[/tex] is a point on the line, and m is the slope of the line. In this case, [tex]$(x_1, y_1)$[/tex] is (-1, 1) and m is 4, so the equation of the line is:

[tex]$y - 1 = 4(x - (-1))$[/tex]

[tex]$y - 1 = 4x + 4$[/tex]

[tex]$y = 4x + 5$[/tex]

Therefore, the equation of the line that passes through the point (-1, 1) and is parallel to a line that passes through (3, 6) and (1, -2) is: [tex]$y = 4x + 5$[/tex].

For more questions related to coordinate

https://brainly.com/question/29660530

#SPJ1

How do you write 9.6522 as a percentage

Answers


To convert a decimal number to a percentage, you need to multiply it by 100.

So, to write 9.6522 as a percentage, you need to multiply it by 100, which gives you:

9.6522 x 100 = 965.22%

Therefore, 9.6522 written as a percentage is 965.22%.

3x+2=8 what is the value of x

Answers

Answer:

x = 2

Step-by-step explanation:

3x + 2 = 8

Subtracting both sides by 2 we get,

=> 3x + 2 - 2= 8 - 2

=> 3x = 6

=> x = 6/3

=> x = 2

3x + 2 = 8
3x + 2 - 2 = 8 - 2
3x = 6
3x/3 = 6/3
x = 2

(I NEED THIS RIGHT NOW!! PLEASE GIVE EXPLANATION!!) Millie and her brother, Jack, sold candy baes for the band fund-raiser. Millie sold three times as many candy bars as Jack. If Jack sold 30 candy bars, which equation and solution can be used to represent y, the number of candy bars Millie sold?

A. 3y = 30; y = 10
B. 30 = y/3; y = 103
C. 30 = y/3; y = 90
D. 3y = 30; y = 90

Answers

The answer is C: 30=y/3; y=90

The reason for this is that we know that Millie sold 3 times as much as Jack, and, if we use x to represent the number that Jack sold, and y to represent the number that Millie sold, we can form the equation y=3x which is equivalent to x=y/3.

By substituting x=30, we get to 30=y/3 and multiplying both sides by 3, we get to y=90

Answer:

C

Step-by-step explanation:

When we do 30=y/3 we get 90 because of the fraction symbol and its says in the problem 3 times as much so more not less so 3x30 equals 90 so we already take out A and B and when there is nothing but a simple equation like 30=3 we dived so it cant be D Ethier so its C

PLS GIVE BRAINLIST

Happy Easter

MARKING AS BRAINLIST PLS HELP

Answers

Answer:

The angle of C is 118.6

Step-by-step explanation:

The Hartford offered an annuity that pays 5.5% compounded monthly.
What equal monthly deposit should be made into this annuity in order
to have $100000 in 10 years?

Answers

If an annuity pays 5.5% compounded monthly, then the "equal-monthly-deposit" to have $100000 in 10 years is $627.

In order to calculate the "monthly-deposit" needed to accumulate $100,000 in 10 years at 5.5% compounded monthly, we use the formula for the future value of an annuity:

Which is : FV = P × [(1 + r)ⁿ - 1]/r,

where:

FV is "future-value" = $100000,

P = monthly deposit

r = monthly interest rate (5.5%/12 = 0.00458)

n = number of months (10 years × 12 months per year = 120 months)

Substituting the values,

We get,

⇒ 100000 = P × [(1 + 0.00458)¹²⁰ - 1]/0.00458,

⇒ P = 100000 × 0.00458 / [(1 + 0.00458)¹²⁰ - 1],

⇒ P ≈ $627,

Therefore, an equal monthly deposit is approximately $627.

Learn more about Annuity here

https://brainly.com/question/28015034

#SPJ1

Identify the law illustrated by the following: 4bracket(3x-7) is equivalent to 12x-28.

Answers

Distributive property

Talisa plans a 36​-foot deep pond. While​ digging, she hits rock 30 feet down. How can Talisa modify the radius to maintain the original volume of the​ pond?

Talisa should make the radius ___ ft

Answers

The radius of the pond should be modified to 19.72ft to be able to maintain the original volume of the pond.

How to modify the radius to maintain the original volume?

The original shape of the pond is the shape of a cylinder and the formula tye can be used to calculate the volume of a cylinder = πr²h

The volume of the original pond is calculated as follows;

π = 3.14

Radius = 18 ft

height = 36ft

Vol = 3.14×18×18×36

= 36,624.96ft³

The radius of the modified pond is calculated as follows; Volume = 36,624.96ft³

height = 30ft

radius = ?

That is;

36,624.96 = 3.14×r²× 30

r² = 36,624.96/94.2

= 388.8

r = √388.8

= 19.72 ft

Learn more about volume here:

https://brainly.com/question/29504549

#SPJ1

What questions please help me thanks

Answers

1. The monthly payment for Loan A is roughly $516.40.

2. The total interest for Loan A is roughly $1590.4

How do we calculate the monthly payment and total interest?

We've been given the formula: PMT = (P(r/n)) / [1 - (1 + r/n)^-nt] to calculate the monthly payment loan.

If we should insert the figures given to the formula, it should be

PMT = (17000(0.059/12)) / [1 - (1 + 0.059/12)^(-12*3)]

PMT = 516.40

To calculate  total interest for loan A, we use the formula  (PMT x n x t) - P.

If we insert the figure provided, it should be;

(598.87 x 12 x 3) - 17000

=  $1590.4

The above answer is in response to the question below as seen in the picture;

Suppose that you decide to borrow $17,000 for a new car. Installment loan A: 3 years at 5.9%. Use PMT = (p(r/n))/ [1 - (1 + r/n)^-nt]

Find the monthly payment and the total interest for loan A. The monthly payment for Loan A is $..............

Find more exercises on monthly payment for Loan;

https://brainly.com/question/22803498

#SPJ1

The claim is that for a smartphone​ carrier's data speeds at​ airports, the mean is 18.00 Mbps. The sample size is n= 14 and the test statistic is t= -2.645 .
whats the ​P-value?

Answers

According to given information the P-value is approximately 0.016.

What is P-value?

In statistical hypothesis testing, the p-value is the probability of obtaining a test statistic as extreme as or more extreme than the observed results, under the assumption that the null hypothesis is true.

According to given information:

To find the P-value for this hypothesis test, we need to use a t-distribution with degrees of freedom equal to n-1 = 14-1 = 13. Since the test statistic is t = -2.645, we need to find the area under the t-distribution curve to the left of t.

Using a t-table or calculator, we can find that the area to the left of t = -2.645 with 13 degrees of freedom is approximately 0.008. This is the probability of observing a t-value less extreme than -2.645, assuming the null hypothesis is true.

Since this is a two-tailed test (we are testing whether the true mean is less than or greater than 18.00 Mbps), we need to double the one-tailed P-value to get the two-tailed P-value. Therefore, the P-value is approximately 0.016 (i.e., 2 x 0.008).

So, the P-value is approximately 0.016.

To know more about P-value visit:

https://brainly.com/question/13786078

#SPJ1

2. Why was the Constitutional Convention held?
lengte
A. Each state's government was too weak.
B. Americans wanted to win independence from England.
C. The national government was too weak.
D. The states wanted to form the first American government.


Anyone pls

Answers

The answer is C) The national government was too weak.

based on an exponential model of the data, what is the predicted value of variable 2 when variable 1=2? round your answer to the nearest whole number.
a. variable 2 ≈ 128
b. variable 2≈ 166
c. variable 2≈ 181
d. variable 2≈ 263

Answers

The predicted value of Variable 2 when Variable 1 = 2 is 82.

How to calculate the value :-

The graph shows that the data has a diminishing exponential trend.

We can utilize the trendline tool in a spreadsheet program like Excel to discover the equation of the exponential function that matches the data. Using the trendline feature, we obtain the following equation:

Variable number 2 = 120.28 * 0.8555Variable number one

We can now use this equation to estimate the value of Variable 2 when Variable 1 = 2:

82 Variable 2 = 120.28 * 0.85552

When Variable 1 = 2, the anticipated value of Variable 2 is 82, rounded to the closest whole number.

Learn more about variables on

brainly.com/question/28248724

#SPJ1

The predicted value of Variable 2 when Variable 1 = 2 is 82.

How to calculate the value :-

The graph shows that the data has a diminishing exponential trend.

We can utilize the trendline tool in a spreadsheet program like Excel to discover the equation of the exponential function that matches the data. Using the trendline feature, we obtain the following equation:

Variable number 2 = 120.28 * 0.8555Variable number one

We can now use this equation to estimate the value of Variable 2 when Variable 1 = 2:

82 Variable 2 = 120.28 * 0.85552

When Variable 1 = 2, the anticipated value of Variable 2 is 82, rounded to the closest whole number.

Learn more about variables on

brainly.com/question/28248724

#SPJ1

There are only red counters, blue counters and green counters in a bag.
number of red counters: number of blue counters: number of green
counters = 1:3:7
A counter is going to be taken at random from the bag.
Complete the table below to show each of the probabilities that the counter will be red or blue or green.
(2 marks)

Answers

Answer:

Color Probability

Red         1/11

Blue 3/11

Green 7/11

Step-by-step explanation:

The total number of counters in the bag is 1+3+7=11. The probability of selecting a red counter is 1/11, because there is only one red counter in the bag. The probability of selecting a blue counter is 3/11, because there are three blue counters in the bag. Similarly, the probability of selecting a green counter is 7/11, because there are seven green counters in the bag.

Change zero degrees Celsius to Fahrenheit.

Answers

Answer: F=32

Step-by-step explanation:formula: F = Celsius*9/5+32

so plug the zero for Celsius, in this case, 0*9/5+32 = 32

7. El área de un terreno de forma rectangular es 4332 m?. Si de ancho mide la tercera parte de su medida de largo, ¿Cuáles son las dimensiones del rectángulo?

Answers

Sea x la medida de largo del terreno. Entonces, el ancho del terreno es x/3. Como el área del terreno es 4332 m², podemos escribir la ecuación:

x(x/3) = 4332

Resolviendo para x, obtenemos:

x²/3 = 4332

Multiplicando ambos lados por 3, obtenemos:

x² = 12996

Tomando la raíz cuadrada de ambos lados, obtenemos:

x = 114

Por lo tanto, las dimensiones del rectángulo son 114 m de largo y 38 m de ancho.

what is the inverse of f(x)=(4x-9)^1/2

Answers

The inverse of f(x) = [tex](4x-9)^{1/2[/tex] when the variables of x and y are switched is [tex]F(x)^{-1}[/tex] =  [tex]\frac{x^{2}+9 }{4}[/tex]

What is an Inverse of a Function?

Inverse of a function is a function which can be reversed into another function. It is also a function that undoes the action of the another function.

How to determine this

When f(x) = (4x-9)^1/2

To determine the inverse, [tex]f(x)^{-1}[/tex]= y

y = (4x-9)^1/2

y = [tex]\sqrt{4x-9}[/tex]

By squaring both sides

y^2 = 4x - 9

By swapping the variables

x^2 = 4y - 9

Subtracting 9 from both sides

x^2 +9 = 4y

divide through by 4

[tex]\frac{x^{2}+9 }{4}[/tex] = 4y/4

y = [tex]\frac{x^{2}+9 }{4}[/tex]

Therefore [tex]F(x)^{-1}[/tex] = [tex]\frac{x^{2}+9 }{4}[/tex]

Read more about Inverse of a Function

https://brainly.com/question/19425567

#SPJ1

Other Questions
let a = {0, 3, 4, 5, 7 } and b = {4, 5, 6, 7, 8, 9, 10, 11}. let d be the divides relation. that is, for all (x, y) a b, x d y iff x | y. ? QUESTIONThe perimeter of the rectangle below is 132 units. Find the length of side VW.Write your answer without variables.YV4z + 13z + 2W y the motor in a furnace fan draws 90 a of current during its short startup time of 0.5 seconds. determine the amount of charge that passes through the circuit over that time.a). 15 Cb) 45 C c) 180 C d) 90.5 C zhao company has fixed costs of $342,200. its single product sells for $173 per unit, and variable costs are $115 per unit. compute the units that must be sold to achieve a target income of $116,000. choose the phrase that best describes the relative acid strength of these acids. ch 4 nh 3 . hbr hcl . ideas principales de cien aos de Soledad why doesnt an isotonic sucrose solution cause hemolysis? An electric rocket is to be designed to provide a Au, of 5.7 km/s. Given that the "burn" time is 3 months, and (a/n) is 10 kg/kW, calculate the optimum specific impulse, and the corresponding (M./Mo). Furnish either a table or a plot of Isp- (M/M) values to support your conclusion, and highlight the necessary information in it. {Ans.: 3700s, 0.7316) 9) Select the phrase that best completes the following setence.A company that has ____________ can expect higher turnover, absenteeism, andlawsuitsa. an ethnocentric cultureb. a diverse culturec. a pluralistic culture express the number as a ratio of integers. 0.94 = 0.94949494 Suppose that we don't have a formula for g(x) but we know that g(2) - 5 and g'(x) = Vx^2 + 5 for all x. (a) Use a linear approximation to estimate g(1.99) and g(2.01). (Round your answers to two decimal places.) g(1.99) =g(2.01) = how many strings of length four can be formed using the letters abcde if repetitions are not allowed? Suppose that the polynomial function f is defined as follows. Which of the following is accurate in terms of the relationship between the velocity of a reaction and the rate constant of a reaction? Choose one: A. For a first-order reaction, the rate constant of a reaction is equal to the product of the substrate concentration and the velocity of the reaction. B. For both first-order and second-order reactions, the concentration of substrate is equal to the product of the velocity of the reaction and the rate constant of the reaction. C. In a first-order reaction, the rate constant of a reaction is equal to the velocity of the reaction divided by the concentration of substrate. D. In a second-order reaction, the rate constant is equal to the velocity of the reaction multiplied by the concentration of both substrates. Help me with these questions please!! What is the complexity of maximum subarray sum? ALGIBRA 1 PLEASE HELPPPP IM GIVING 20 POINTS! What purpose do circles serve in the murals (Harlem Renaissance) a compound is found to contain 1.245 nickel and 5.381 g iodine. it's empircal formula is