resting pulse rates for a random sample of 26 smokers had a mean of 80 beats per minute (bpm) and a standard deviation of 5 bpm. among 32 randomly chosen nonsmokers, the mean and standard deviation were 74 and 6 bpm. both sets of data were roughly symmetric and had no outliers. a. create a 95% confidence interval for the difference in the resting pulse rates between smokers and nonsmokers.

Answers

Answer 1

We can be 95 % confident that for smokers the pulse rate is between 3.1 and 8.9 beats per minute higher than for nonsmokers.

We are given that the total number of samples taken to observe the resting pulse rates of smokers is 26 with a mean and standard deviation of 80 bpm and 5 bpm respectively while samples taken for nonsmokers is 32 with a mean and standard deviation of 74 bpm and 6 bpm respectively.

We have independent random samples, each less than 10 % of the population, and the data appears to be approximately normal.

For smokers, n1 = 26, y1 = 80, s1 = 5

For non smokers, n2 = 32, y2 = 74, s2 = 6

t = [tex]((y1-y2) - H0)/ \sqrt{(s1^2/n1) + (s2^2/n2}[/tex]

t = [tex]((80 - 74) - 0)/ \sqrt{(5^2/26) + (6^2/32)}[/tex]

t = 4.15

P ≈ 0.0001

df ≈ 56

as the P-value is very small, the difference observed is not a sampling error. We have strong evidence of a difference in mean pulse rates for smokers and nonsmokers.

To find how big is that difference,

[tex](y1-y2)[/tex] ± t* SE(y1-y2)

= [tex](80 - 74)[/tex] ± [tex]t*(\sqrt{5^2/26 + 6^2/26})[/tex]

= (3.1, 8.29)

Therefore, we can be 95 % confident that the difference in resting pulse rates between smokers and nonsmokers is between the interval of 3.1 and 8.29 beats per minute.

To learn more about the pulse rate of smokers and nonsmokers;

https://brainly.com/question/17250317

#SPJ4


Related Questions

Maya weighed 15 packages. Their mean weight was 5 pounds. What was the total weight of the 15 packages?​

Answers

Answer:

75lbs

Step-by-step explanation:

if the mean of the packages was 15 then all the items averaged to 5 pounds each meaning they had a total of 15*5 or 75lbs

A rectangular prism has a length of 10 inches, a width of 4 inches, and a height of 3.7 inches. What is the volume of this rectangular prism?

Answers

Answer:

I believe it's 148.

Step-by-step explanation:

You must do L x W x H to find the volume of a rectangular prism or cube.

The set of values for x that satisfies a quadratic inequality is x < -0.5 or x > 1.5
Write down a possible quadratic inequality. Can u show me working it how to do this please. Thanks

Answers

Answer:

To write a possible quadratic inequality, we first need to determine which quadratic function has roots at x = -0.5 and x = 1.5.

We know that the solution to the quadratic inequality is x < -0.5 or x > 1.5, which means that the parabola associated with our quadratic function should not intersect the x-axis between x = -0.5 and x = 1.5.

One quadratic function with roots at x = -0.5 and x = 1.5 is:

(x + 0.5)(x - 1.5) ≤ 0

To see why this is the case, we can use a graphing calculator to graph the quadratic function y = (x + 0.5)(x - 1.5) and observe that the function is negative (i.e., has a y-value less than zero) when x is less than -0.5 or greater than 1.5.

Alternatively, we can use the fact that the product of two factors is less than or equal to zero if and only if one factor is positive and the other is negative.

Since (x + 0.5) is positive for x > -0.5 and negative for x < -0.5, and (x - 1.5) is positive for x > 1.5 and negative for x < 1.5, the inequality (x + 0.5)(x - 1.5) ≤ 0 is true for x < -0.5 or x > 1.5, but false for -0.5 < x < 1.5.

Therefore, a possible quadratic inequality that satisfies the given set of values for x is:

(x + 0.5)(x - 1.5) ≤ 0

it is known that roughly 2/3 of all human beings have a dominant right foot or eye. is there also right-sided dominance in kissing behavior? an article reported that in a random sample of 127 kissing couples, both people in 79 of the couples tended to lean more to the right than to the left.

Answers

It is possible that there is right-sided dominance in kissing behavior, based on the reported study. The fact that in a random sample of 127 kissing couples, both people in 79 of the couples tended to lean more to the right than to the left suggests a pattern of right-sided dominance.

However, it is important to note that this study alone is not conclusive evidence of right-sided dominance in kissing behavior.

Further research would be needed to confirm whether there is a consistent pattern of right-sided dominance in kissing behavior across different populations and cultures. It is also possible that other factors, such as social or psychological factors, could influence the direction in which people lean during a kiss. Therefore, it is important to approach this topic with caution and not draw any firm conclusions based on a single study.

Learn more about right-sided dominance

https://brainly.com/question/10709533

#SPJ4

HELPPPPPPPPPPPP PLSSSSSSS

Answers

Answer: Angle E is 90 degrees
Angle E is the answer.

What happens when the function f(x) = 2 sin(2) is transformed by the rule g (w) = - f(x)?
• f(x) is stretched away from the x-axis by a factor of 2 and is reflected over the x-axis.
O f(x) is reflected over the y-axis.
O f(x) is reflected over the x-axis.
• f(x) is compressed toward the y-axis by a factor of 1/2 and is reflected over the y-axis

Answers

Answer:

• f(x) is stretched away from the x-axis by a factor of 2 and is reflected over the x-axis.

Step-by-step explanation:

The function f(x) = 2sin(2x) has an amplitude of 2 and a period of π/2. When we apply the rule g(w) = - f(x), we are reflecting the graph of f(x) over the x-axis and then taking its opposite. This means that the amplitude of g(w) will still be 2, but the graph will be reflected and stretched away from the x-axis by a factor of 2.

I hope it helps you

what is the mode of the data represented in this line plot?

Answers

Answer:6

Step-by-step explanation:

Surface are. Help!!!!!!!!

Answers

The surface areas of the prisms are listed below:

Case 1: 94 in²

Case 2: 72 cm²

Case 3: 40.5 m²

Case 4: 39.1 mm²

Case 5: 130 ft²

Case 6: 136 m²

How to find the surface area of a prism

In this problem we find six cases of prisms, whose surface areas have to be found. Surface area is the sum of the areas of all faces in the prism. Face have either a rectangular or a triangular form, whose area formulas are:

Rectangle

A = b · h

Triangle

A = 0.5 · b ·h

Where:

A - Areab - Widthh - Height

Now we proceed to determine the surface areas:

Case 1

A = 2 · (4 in) · (5 in) + 2 · (3 in) · (4 in) + 2 · (5 in) · (3 in)

A = 40 in² + 24 in² + 30 in²

A = 94 in²

Case 2

A = 2 · 0.5 · (3 cm) · (4 cm) + (5 cm) · (4 cm) + (5 cm) · (3 cm) + (5 cm)²

A = 12 cm² + 20 cm² + 15 cm² + 25 cm²

A = 72 cm²

Case 3

A = 2 · (3 m) · (7 m) + 2 · (6 m) · (7 m) + 2 · (6 m) · (3 m)

A = 10.5 m² + 21 m² + 9 m²

A = 40.5 m²

Case 4

A = 2 · 0.5 · (4 mm)² + 2 · (4 mm) · (3 mm) + (5.7 mm) · (3 mm)

A = 16 mm² + 6 mm² + 17.1 mm²

A = 39.1 mm²

Case 5

A = 2 · (10 ft) · (5 ft) + 2 · (5 ft) · (1 ft) + 2 · (10 ft) · (1 ft)

A = 100 ft² + 10 ft² + 20 ft²

A = 130 ft²

Case 6

A = 2 · 0.5 · (6 m) · (4 m) + 2 · (7 m) · (5 m) + (7 m) · (6 m)

A = 24 m² + 70 m² + 42 m²

A = 136 m²

To learn more on surface area of solids: https://brainly.com/question/29301011

#SPJ1

Austin collected 30 9/10 kilograms of grass for recycling in exactly 2/3 of the class he collectible was the total amount in kilograms of blue grAss

Answers

Answer: Let's call the total amount of grass that Austin collected "G" in kilograms. We know that he collected 30 9/10 kilograms, which can be written as a mixed number or an improper fraction:

30 9/10 = 309/10

So, we have:

G = 309/10

We also know that 2/3 of the grass he collected was blue grass. So, let's call the amount of blue grass "B" in kilograms. We can set up an equation based on the information given:

B = (2/3)G

Substituting G = 309/10, we get:

B = (2/3)(309/10)

B = 206/5

B = 41 1/5

Therefore, the total amount of blue grass Austin collected was 41 1/5 kilograms.

Step-by-step explanation:

PLEASE HELP AND SHOW WORK! EXPLAIN HOW YOU GOT THE ANSWER I WILL MARK YOU BRAINLIEST!!!

Answers

The height of the cylinder, given the volume and the diameter of the base, would be 2, 592.46 feet

How to find the height of the cylinder ?

The given diameter of the base is 10 inches, so we need to find the radius first. The radius is half the diameter:

Radius (r) = Diameter / 2 = 10 inches / 2 = 5 inches

We also need to convert the radius from inches to feet since the volume is given in cubic feet:

5 inches = 5/12 feet = 0.4167 feet

Volume of a cylinder:

Volume (V) = πr²h

450π = π x (0.4167)^2 x h

450 = (0.4167)^2 x h

h = 450 / (0.4167)^2 = 2, 592.46 feet

Find out more on height at https://brainly.com/question/28247116


#SPJ1

the manager of a sawmill wants to find out what percentage of the boards that the mill produced are defective.which sampling methods are likely to be biased?select each correct answer.responseson 1 day, an hour after the sawmill begins production, 30 boards in a row are selected and examined.on 1 day, an hour after the sawmill begins production, 30 boards in a row are selected and examined.the manager sends an email to 20 customers who buy lumber from the mill, asking each how many of the boards they bought the past week were defective. results from the first 5 customers to respond are tallied.the manager sends an email to 20 customers who buy lumber from the mill, asking each how many of the boards they bought the past week were defective. results from the first 5 customers to respond are tallied.the manager selects 20 boards at random each day for 5 days and examines them.the manager selects 20 boards at random each day for 5 days and examines them.every 40th board produced over the course of 1 week is selected and examined.

Answers

Sampling methods that may be biased for finding the percentage of defective boards in a sawmill production are: selecting 30 consecutive boards, emailing customers and relying on their responses, and selecting every 40th board produced. So, the correct answer is A, B and D.

The biased sampling methods are Examining 30 consecutive boards one hour after production begins may be biased because it only captures a snapshot of the production at that specific time, and the boards selected may not be representative of the entire batch produced during the day.

Emailing customers to ask about defective boards may be biased because the response rate may vary among customers, and customers who experienced a higher or lower number of defective boards may be more likely to respond.

Selecting 20 boards at random each day for 5 days and examining them is less likely to be biased, as long as the selection process is truly random and representative of the entire production.

Selecting every 40th board produced over the course of one week is also less likely to be biased if the production process is consistent and there are no patterns or variations in the production that would affect the quality of every 40th board. So, the correct answer for biased is A, B and D.

To know more about biased sampling methods:

https://brainly.com/question/18900165

#SPJ4

A manufacturer of hard safety hats for construction workers is concerned about the mean and the variation of the forces helmets transmit to wearers when subjected to a standard external force. The manufacturer desires the mean force transmitted by helmets to be 800 pounds (or less), well under the 1000-pound legal limit, and the standard deviation to be less than 40. A random sample of 31 helmets was tested and the sample mean and variance were found to be 825 pounds and 2350 pounds2, respectively. The manufacturer wants to know if the data provides sufficient evidence to indicate that the standard deviation is significantly less than 40.
Step 1 of 5: Calculate the test statistic for this problem. Round your answer to two decimal places.
Step 2 of 5: Determine the p-value for a lower one-sided alternative hypothesis (left-tail test). The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 3 of 5: What is the rejection region at the 10% level of significance for the test on the variance for a left-tailed alternative hypothesis? The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 4 of 5: State your conclusion using a significance level of 0.05. The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 5 of 5: Calculate a 90% confidence interval for the variance of force on the helmets. Round your answers to four decimal places.

Answers

Step 1: The test statistic is 56.56.

Step 2: Using a chi-square distribution table with 30 degrees of freedom (n - 1), we find that the p-value is less than 0.0001.

Step 3: The rejection region for a left-tailed test with 30 degrees of freedom at the 10% level of significance is any test statistic less than 18.307.

Step 4: The test statistic of 56.56 is greater than the critical value of 18.307.

Step 5:  The 90% confidence interval for the variance of force on the helmets is [1615.46, 4123.82]

What is Variance?

In statistics, variance is a measure of the spread or dispersion of a set of data points. It is calculated as the average of the squared differences from the mean.

Step 1: To test whether the standard deviation is significantly less than 40, we can use a chi-square test with the null hypothesis H0: [tex]σ^{2}[/tex] ≥ 1600 lbs² and the alternative hypothesis H1: σ² < 1600 lb[tex]s^{2}[/tex]. The test statistic is:

chi-square = (n - 1) *[tex]s^{2}[/tex] / [tex]σ^{2}[/tex]

where n is the sample size, [tex]s^{2}[/tex] is the sample variance, and [tex]σ^{2}[/tex] is the population variance under the null hypothesis.

Substituting the given values, we have:

chi-square = (31 - 1) * 2350 / 1600 = 56.56

Rounding to two decimal places, the test statistic is 56.56.

Step 2: To determine the p-value for a left-tailed test, we need to find the area under the chi-square distribution to the left of the test statistic. Using a chi-square distribution table with 30 degrees of freedom (n - 1), we find that the p-value is less than 0.0001.

Step 3: The rejection region for a left-tailed test with 30 degrees of freedom at the 10% level of significance is any test statistic less than 18.307.

Step 4: Since the test statistic of 56.56 is greater than the critical value of 18.307, we reject the null hypothesis and conclude that there is sufficient evidence to indicate that the standard deviation is significantly less than 40 at the 5% level of significance.

Step 5: To calculate a 90% confidence interval for the variance of force on the helmets, we can use the formula:

[(n - 1) * [tex]s^{2}[/tex]/ chi-square upper, (n - 1) * [tex]s^{2}[/tex] / chi-square lower]

where chi-square upper and chi-square lower are the upper and lower critical values, respectively, from the chi-square distribution table for 30 degrees of freedom at the 5% level of significance. Substituting the given values, we have:

chi-square upper = 45.722

chi-square lower = 18.307

[(31 - 1) * 2350 / 45.722, (31 - 1) * 2350 / 18.307] = [1615.46, 4123.82]

To learn more about Variance visit the link:

https://brainly.com/question/9304306

#SPJ4

PLEASE is due very soon please explain 50pts

Answers

Answer:

3

Step-by-step explanation:

Because same numbers = same y intercept but I'm not sure

Answer:

  1) The image has the same slope, different y-intercept

Step-by-step explanation:

You want the relationship between the line 3x -5y = 4 and its image dilated by a factor of 5/3 centered at the origin.

Dilation

Dilation about the origin multiplies every coordinate by the dilation factor. Dilation does not change slopes or angles, but it changes lengths by the dilation factor.

Dilation of a line

When the equation of a line is written in standard form, the dilation of it effectively multiplies the constant by the dilation factor.

The given line has intercepts ...

  ax +by = c

  x-intercept = c/a = 4/3

  y-intercept = c/b = -4/5

If these values are multiplied by the dilation factor 5/3, they become ...

  x-intercept' = (5/3)(4/3) = 20/9 = 2 2/9

  y-intercept' = (5/3)(-4/5) = -4/3 . . . . . note the y-intercept has changed

Slope

The slope of the given line can be determined from its intercepts:

  m = (-y intercept)/(x intercept) = -(-4/5)/(4/3) = 3/5

Since both of these intercepts are multiplied by the same dilation factor, their ratio remains unchanged. The slope of the dilated line is the same.

Equation

Effectively, the dilated line's equation is ...

  3x -5y = 4(5/3)

  3x -5y = 20/3

__

Additional comment

The original (dashed) line and its dilated image are shown in the attachment.

A teacher surveyed her class after they had taken a vocabulary test. Eighteen of the students claimed they had studied
at least one hour for the test. The remaining twelve students admitted that they had not studied for the test at all. The
test results (expressed as a percent) for the two groups are shown below.
Studied: 88, 100, 94, 79, 92, 100, 95, 83, 89, 99, 100, 91, 89, 95, 100, 93, 96, 84
Did Not Study: 82, 72, 45, 91, 58, 83, 65, 87, 90, 77, 73, 89
1. Calculate the range and Interquartile range for each set of data.
2. Using complete sentences, compare the data sets based on your results in part A.
NEED THIS ASAP PLEASE

Answers

Here are the solutions:

1.
Studied:
Range = 100 - 79 = 21
Interquartile range = 96 - 89 = 7

Did Not Study:
Range = 91 - 45 = 46
Interquartile range = 83 - 73 = 10

2. Using complete sentences:

The students who studied for at least one hour had a smaller range and interquartile range for their test scores compared to the students who did not study at all.

The scores for the students who studied were tighter together while the scores for the students without studying were more spread out and varied.

The studied group achieved significantly higher median scores since their interquartile range was smaller. In summary, studying for the vocabulary test resulted in more consistent and higher scores for the students.

Does this help explain the solutions? Let me know if any part is unclear. I can provide additional details or examples if needed.

A piece of machinery is designed in a shape of a triangular prism. It must be coated in Teflon before it is placed in the machine. How many square inches of Teflon will be needed to completely to cover the machinery

Answers

We would need 168 square inches of Teflon to completely cover the triangular prism machinery.

To calculate the surface area of a triangular prism, we need to find the area of each face and then add them up. Let's assume that the triangular bases of the prism have base b and height h, and that the length of the prism is l.

The surface area of the triangular bases is (1/2)bh for each base, so the total area is (1/2)bh + (1/2)bh = bh.

The lateral surface area of the prism is the area of the three rectangular faces. Each rectangular face has length l and height h, so the total lateral surface area is 3lh.

Therefore, the total surface area of the triangular prism is

bh + 3lh

To determine how much Teflon is needed to cover the machinery, we need to know the dimensions of the triangular prism. Once we have those dimensions, we can calculate the surface area using the formula above and then use that value to determine the amount of Teflon required.

Let's say the base of the triangular prism is 4 inches and the height is 6 inches, and the length of the prism is 8 inches. Then the surface area of the triangular prism is

bh + 3lh

= (4 in. x 6 in.) + 3(8 in. x 6 in.)

= 24 in² + 144 in²

= 168 in²

To know more about triangular prism here

https://brainly.com/question/17286531

#SPJ4


Adding and subtracting decimals

1) 34.12 - 41.23 + 14.01
2) -34.12 + 41.23 - 14.01

Combine all positive numbers:
Combine all negative numbers:
Rewrite:

(look at the picture)

Answers

Answer:

1Step-by-step explanation:

NEED HELP FAST PLEASE HURRY INDEED OF HELP

Answers

Answer:

Step-by-step explanation:

Hopefully this is right.

Area = (pi)r²

Which is pi times the the radius squared

The radius is 2, so 2² is 4, So we multiply 3.14, which is pi, by 4.

Multiply 3.14 by 4, and the answer is 12.56, the question says round to the nearest tenth, so the final answer will be 12.6

My math teacher back in 7th grade gave us this sentence to help us memorize the equations.

Cherry Pie Delicious (C=(pi)d), Apple Pie Are Too (A=(pi)r²)

Do the same with the other two questions, and the answer for question two will be 3.14, rounded to the nearest tenth will be 3.1

Question three do the same as well, and the answer will be 660.185, rounded will be 660.2

Hope this helps!

What is the area of a right triangle with a height of 6-yards and a base of 22 yards?
O 34 yds²
O 68³
yds²
O 132 yds²
O
137/ yds²

Answers

Answer:

68 3/4 yds

Step-by-step explanation:

trust me :)

Answer:

see below

Step-by-step explanation:

area of triangle formula  = 1/2 base * height

so 1/2*6*22 =66

not sure why there's no choice of 66

Draw triangle PQR where PQ has length 4 cm PR has length 3.5 cm and angle RPQ is 32° 


Answers

This is the right answer

Find the slope of the line through the pair of points. D(3, 5), J(8, 7)


20 POINTS

Answers

Answer:

2/5

Step-by-step explanation:

slope= y2-y1 / x2-x1

in this case:

y2=7                            y1=5                      x2= 8                      x1=3

plug that into the formula above to get the answer

slope= 2/5 or 0.4

What is the value of x in the equation 2x + 3 = 11?

Answers

Answer: x=4

Step-by-step explanation:

Isolate x using opposite operations.

2x + 3 = 11

2x = 8

x = 4

Answer:

4

Step-by-step explanation:

subract 3 from 11

2x=8

divide by 2

x=4

calculate the probability of obtaining a sample result of 168 out of 200 or less if the company's claim is true. (use a table or technology. round your answer to four decimal places.)

Answers

The cumulative probability of obtaining a sample result will be approximately 0.0001

We have to apply Formula of Binomial Distribution:

P(X ≤ 168) = ΣP(X = i) for i = 0, 1, 2, .., 168, here in a sample of size n, P(X = i) is the probability of getting exactly i success

We assume that company's claim is true, 0.8 is the probability of success for each trial

P(X = i) = (200 choose i)×[tex]0.8^{i}[/tex] ×[tex]0.2^{200- i}[/tex]

By using this, we can easily find that cumulative probability is 0.0001

So, the probability is very low, this means that company's claim of an 80% success rate can be incorrect

So, further analysis may be needed to draw some conclusions and results

To learn more about probability:

https://brainly.com/question/136047

#SPJ4

Write linear equation in slope intercept form:1/4x+y=-2/7

Answers

The given linear equation in slope intercept form is y = -1/4(x) - 2/7.

What is the slope-intercept form?

In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical equation;

y = mx + c

Where:

m represents the slope or rate of change.x and y are the points.c represents the y-intercept or initial value.

By making "y" the subject of formula, we have the following:

1/4x + y = -2/7

y = -1/4(x) - 2/7

By comparison, we have the following:

Slope, m = -1/4.

y-intercept, c = -2/7.

Read more on slope-intercept here: brainly.com/question/7889446

#SPJ1

Find the exact value of x

Answers

Answer:9

Step-by-step explanation:

A triangle has two sides measuring 4 cm and 8 cm. Which lengths cannot be the length of the third side ​

Answers

The length of the third side ​of a triangle cannot be 15 cm

The correct answer is an option (b)

We know that the triangle inequality theorem states that the sum of any two sides of a triangle is greater than or equal to the third side.

For example if a, b, c represents the side of a triangle then by above theorem a + b ≥ c

Here, the two sides of a triangle measure 4 cm and 8 cm.

Let a = 4 cm and b = 8 cm and c represents the third side of a triangle.

Using triangle inequality theorem,

a + b ≥ c

4 + 8 ≥ c

12 ≥ c

This means that the third side of the triangle must be less than or equal to 12 cm.

Thus, the correct answer is an option (b)

Learn more about the triangle here:

https://brainly.com/question/30298845

#SPJ4

The complete question is:

A triangle has two sides measuring 4 cm and 8 cm. Which lengths cannot be the length of the third side ​

a) 7 cm

b) 15 cm

c) 10 cm

d) 5 cm

Find the value of x. If a segment looks like a tangent, it is a tangent.

Answers

The value of x in the circle is 19.5 .

What is secant line of circle?

A secant is a straight line that intersects a circle at least twice in different places. We can draw an endless number of secants on a circle since a circle has an infinite number of points around its perimeter.

Here the given circle using formula for secant line ,

(A+B).B = (C+D).D

Here A = x , B = 8 , C= 12 and D=10. Then,

=> (x+8).8= (12+10).10

=> 8x+64 = 22*10

=> 8x+64 = 220

=> 8x = 220-64 = 156

=> x = 156/8 = 19.5

Hence the value of x in circle is 19.5.

To learn more about secant line refer the below link

https://brainly.com/question/31248698

#SPJ1

A rectangle and a triangle below have the same height and base measurements. Find the area of the rectangle and the right triangle, and then compare the areas


The area of rectangle is ____ square inches. The area of the triangle is __ square inches . The area of the triangle is ___ the area of the rectangle

Answers

The area of the rectangle is 48 in².

The area of the triangle is 24 in².

The area of the triangle is half the area of the rectangle.

How to calculate the area of a rectangle and a triangle?

To calculate the area of a rectangle, we multiply the length of the rectangle by its width. And to calculate the area of a triangle we multiply the base of the triangle to the height of the triangle and divide by 2.

To calculate the area of the rectangle, we use the formula below

Formula:

A = LW....................... Equation 1

Where:

A = Area of the rectangleL = Length of the rectangleW = Width of the rectangle

From the question,

Given:

L = 6 inW = 8 in

Substitute into equation 1

A = 6×8A = 48 in²

Also, the area of the triangle is given by the formula below

A' = bh/2.................. Equation 2

Where:

A' = Area of the triangleb = Base of the triangle = 6 inh = Height of the triangle = 8 in

Substitute into equation 2

A' = (6×8)/2A' = 24 in²

Hence, the area of the triangle is half the area of the rectangle.

Learn more about area here: https://brainly.com/question/28470545

#SPJ1

How many times can 3.6 go into 80

Answers

Answer:

22.2

Step-by-step explanation:

Answer:

3.6 can go into 80 22 times.

Step-by-step explanation:

I need help with this problem I am having trouble understanding

Answers

The distance that the fish was able to travel in all was 23. 9 meters .

How to find the distance traveled ?

The distance from Harry to the fish' s hole can be found by the Pythagorean theorem:

a ² + b ² = c ²

7 ² + 7 ² = c ²

49 + 49 = c²

98 = c²

c = 9. 9

The total distance that the fish traveled can then be found by summing the distance it already traveled with the distance to Harry's:

= 14 + 9. 9

= 23. 9 meters

The fish traveled approximately 23.9 meters in all, rounded to the nearest tenth.

Find out more on distance at https://brainly.com/question/29683361

#SPJ1

All relationships have equal weight; none is stronger than any other. true or false?

Answers

False. While all relationships should be valued and respected, it's unrealistic to say that they all have equal weight. Some relationships may be closer and more intimate than others, or may require more time and energy to maintain.

Additionally, some relationships may have greater consequences or impact on our lives than others. It's important to prioritize and nurture our relationships based on their individual significance and value to us.
In the context of relationships, the term "weight" refers to the importance or influence of a particular relationship. Not all relationships have equal weight because the significance of each relationship varies based on factors such as trust, communication, shared experiences, and emotional connections.


Some relationships are naturally stronger and more influential than others due to these factors, making them more valuable and impactful in a person's life. In contrast, weaker relationships may not have the same level of trust, connection, or influence, making them less important overall. It is essential to recognize and nurture the stronger relationships in one's life to maintain a healthy support system and overall well-being.

To learn more about Weight - brainly.com/question/10069252

#SPJ11

Other Questions
in the aftermath of the passage of the indian gaming regulatory act of 1988, many native american nations have ______. devonshire company borrowed $262,000 cash on april 1, 2022, and signed a one-year, 12% interest-bearing note payable. the interest and principal are both due on march 31, 2023. assume that the appropriate adjusting entry was made on december 31, 2022 and that no adjusting entries have been made during 2023. what is the amount of interest expense to be recorded when the interest and principal are paid on march 31, 2023? The teacher asked us to write an essay and provide evidence to support our ideas with details from the text. What phrase provides a context clue to help determine the meaning of "evidence"? Group of answer choices And provide Details from the text The teacher asked us To write an essay in this activity, you will receive an "unknown" containing two species. the first step in identifying these bacteria is to __________. When the ghost appears, who sees it and what are some possible explanations for why only one person sees it? ian is in a band, and has taken the time to learn the ins and outs of the sound system. for example, he knows that when the diaphragm of a loudspeaker moves back in, a process called _____ occurs. 3. Find the area of the shape below. Breakthe larger shape into smaller pieces if needed.8.4m4m11.4m8mak direstboyut ved FI Eric puts several CDS in a case . four CDS are country, six are rap and ten are pop. if Eric picks one CD from the case without looking, what is the probability that he will pick a pop CD.A 3/10B 1/4C 1/3D 1/2 QUESTION 2 Under price discrimination, ... the seller chooses the optimal price for each customer (or group of customers) based on the optimal output rule (MR=MC). O a different price is charged to each customer (or group of customers) based on the marginal cost (MC) of selling the product to the customer. the buyer has the market power, so each buyer chooses a different price to pay for the same product. What is this? There should be a screenshot below. In a short paragraph, list the factors that led to US involvement in the Vietnam War. Turn this in with the drop box at the bottom of Slide 8 of this lesson. Which of the following is the basis for nearly all the boundaries of today's sub-Saharan African states? ____ are chemical messengers that cross the synapse to transport electrical impulses from the nerve to the muscle. According to psychologist Gary Emery, four of the basic emotions are: a. fright, love, affection, anger b. joy, sadness, fear, love c. mad, sad, glad, scared d. anxiety, surprise, acceptance, anticipation The average person can achieve about _____ percent of the possible strength gains by doing just one set of ten to twelve different weight training exercises, two times a week.20406080 Find the surface area the regular pyramid 10m 8m 6.9m When it comes to hiring, promotions, benefits and so on, older workers are protected from discrimination based on their age by the In its approach to union organization, the Knights of Labor officially:A) stressed organization of workers by craft.B) encouraged use of the strike.C) discriminated against blacks and women.D) welcomed both skilled and unskilled workers.E) refused to let women join the union. Free speech is usually protected in the United States unless it What are patient education points for someone suffering from diverticular disease?