rank the following radicals in order of decreasing stability, putting the most stable first.i. CH3CH₂ ii. H₂C=CHCH₂ iii. CH3CHCH3 IV. (CH3)3CA. II>IV>III>IB. III>II>IV>IC. IV>III>II>ID. IV>III>I>II

Answer:

chemical hazard

Explanation:

To identify conclusively your unknown solutions as Set B, the following preliminary test results can be looked for:  

By adding HCl to test the presence of Ag ions, [tex]H_{2} SO_{4}[/tex] for ([tex]Ba^{2+}[/tex] ions, [tex]AgNO_{3}[/tex] for Cl- ions, [tex](BaNO_{3})_{2}[/tex] for [tex]SO_{4} ^{2-}[/tex] ions and HCl for OH- ions.

To conclusively identify your unknown solutions as Set B, you should look for the following preliminary test results:

1. Test for the presence of silver ions (Ag+) in [tex]AgNO_{3}[/tex](aq): Add a few drops of HCl(aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of [tex]AgNO_{3}[/tex](aq).

2. Test for the presence of barium ions ([tex]Ba^{2+}[/tex]) in [tex](BaNO_{3})_{2}[/tex](aq): Add a few drops of  [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If a white precipitate of  [tex]BaSO_{4}[/tex] forms, it is an indication of [tex](BaNO_{3})_{2}[/tex](aq).

3. Test for the presence of chloride ions (Cl-) in HCl(aq): Add a few drops of [tex]AgNO_{3}[/tex](aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of HCl(aq).

4. Test for the presence of sulfate ions ([tex]SO_{4} ^{2-}[/tex]) in  [tex]H_{2} SO_{4}[/tex](aq): Add a few drops of Ba(NO3)2(aq) to the unknown solution. If a white precipitate of  [tex]BaSO_{4}[/tex](aq) forms, it is an indication of [tex]H_{2} SO_{4}[/tex](aq).

5. Test for the presence of hydroxide ions (OH-) in NaOH(aq): Add a few drops of HCl(aq) or  [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If the solution fizzes, giving off gas, and neutralizes the acid, it is an indication of NaOH(aq).

To know more about Preliminary Tests of Ions:

https://brainly.com/question/12601152

#SPJ11

The first intermediate in the reaction is the protonation of ethyl benzoate by the HCl to form the ethyl benzoate cation. This can be represented as:

 CH3CH2OCOPh + H+ -> CH3CH2OCOPh2+

The second intermediate is the nucleophilic attack of the methanol on the ethyl benzoate cation, leading to the formation of a tetrahedral intermediate. This can be represented as:

CH3CH2OCOPh2+ + CH3OH -> CH3CH2OCOCH3 + H2O

Overall, the reaction can be represented as:

CH3CH2OCOPh + CH3OH + HCl -> CH3CH2OCOCH3 + H2O + Cl-

Learn more about nucleophilic attack here:

https://brainly.com/question/28325919

#SPJ11

Approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

The balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is:

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

From the equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. The molar mass of CaCO₃ is 100.09 g/mol, and the molar mass of HCl is 36.46 g/mol.

To find the mass of CO₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.

Number of moles of CaCO₃ = 20 g / 100.09 g/mol = 0.1998 mol

Number of moles of HCl = 25 g / 36.46 g/mol = 0.685 mol

According to the balanced equation, 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the limiting reactant is CaCO₃, since only 0.1998 moles of CaCO₃ are available to react with HCl.

From the balanced equation, we know that 1 mole of CaCO₃ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced is also 0.1998 mol.

The molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of CO₂ produced is:

Mass of CO= 0.1998 mol x 44.01 g/mol = 8.79 g

Therefore, approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

Learn more about molar mass,

https://brainly.com/question/22997914

#SPJ4

Table 7.3: Calculated and observed pH of aqueous salts as attached below.

Acetate is a salt or an ester of acetic acid. It can refer to the acetate ion, which is the conjugate base of acetic acid, or to acetate compounds such as sodium acetate or ethyl acetate. The acetate ion has the chemical formula C2H3O2- and is negatively charged.

To measure the pH of each solution, use a pH meter or pH indicator strips according to the manufacturer's instructions. Dip the pH electrode or strip into the solution, wait for the reading to stabilize, and record the observed pH in the table.

Find out more on acetate here: https://brainly.com/question/30224584

#SPJ1

6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To determine how many moles of H₂O should form in the reaction 4NH₃(g) + 5O₂(g) --> 4NO(g) + 6H₂O(g) when 4.5 moles of NH₃ react with sufficient oxygen, follow these steps:

1. Identify the mole ratio of NH₃ to H₂O in the balanced chemical equation. The mole ratio is 4:6 or 2:3.
2. Apply the mole ratio to the given moles of NH₃. In this case, you have 4.5 moles of NH₃. To find the moles of H₂O formed, multiply the moles of NH₃ by the mole ratio of H₂O to NH₃ (3/2):

4.5 moles NH₃×  (3 moles H₂O / 2 moles NH₃) = 6.75 moles H2O

The correct answer is  D) 6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To learn more about moles https://brainly.com/question/15356425

#SPJ11

Based on the number of moles of malachite that we started with, approximately 54.046 grams of water were produced.

The balanced chemical equation for the reaction that produced the malachite is:

2 CuCO₃ · Cu(OH)₂(s) → 3 H₂O(g) + CO₂(g) + 3 CuO(s)

From this equation, we can see that for every 3 moles of water produced, we started with 2 moles of malachite. Therefore, we can use the mole ratio to calculate the number of moles of water produced:

moles of water = (2 moles malachite) x (3 moles water / 2 moles malachite) = 3 moles water

Now that we know the number of moles of water produced, we can use the molar mass of water to calculate the mass:

mass of water = (3 moles water) x (18.0153 g/mol) = 54.046 g

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

Since the molarity of a solution is defined as the number of moles of solute per liter of solution, we need to convert the given concentration of 154 mEq/L of Na+ and Cl- to molarity.

1 mole of an ion is equal to its corresponding molar equivalent weight (MEq). For Na+ and Cl-, the equivalent weight is equal to their atomic weight divided by their valency (1 for both).

The atomic weight of Na is 23 and that of Cl is 35.5.

Therefore, the molar equivalent weight of Na+ = 23 g/mol ÷ 1 = 23 g/equivalent

And the molar equivalent weight of Cl- = 35.5 g/mol ÷ 1 = 35.5 g/equivalent

To convert the concentration of 154 mEq/L to molarity:

Molarity (M) = (concentration in mEq/L) ÷ (molar equivalent weight)

For Na+:

Molarity (Na+) = 154 mEq/L ÷ 23 g/mol = 6.696 M

For Cl-:

Molarity (Cl-) = 154 mEq/L ÷ 35.5 g/mol = 4.346 M

Therefore, there are 6.696 moles of Na+ and 4.346 moles of Cl- in 1.0 L of the physiological saline solution.

Learn more about  moles   here:

https://brainly.com/question/26416088

#SPJ11

On a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the "retention time" for that peak.

Gas chromatography is used to separate compounds of a mixture by injecting a gaseous/liquid sample into a mobile phase known as the carrier gas, which is usually and inert or unreactive gas and passing the gas through a stationary phase.

If we have a sample with many compounds, each compound in the sample will spend different time on the column based on its chemical composition which means that, each will have a different retention time.

For more questions on gas chromatography: https://brainly.com/question/30500847

#SPJ11

The number of electrons being transferred in the reaction is (c) 2.

The balanced redox reaction given is:

2S₂O₃²⁻ + I₂ → 2I⁻ + S₄O₆²⁻

To determine the number of electrons being transferred, we need to identify the changes in oxidation states of the elements involved in the reaction. In this reaction, iodine (I) and sulfur (S) are the elements undergoing redox changes.

Initially, I₂ has an oxidation state of 0 (elemental form). In the product, I⁻, its oxidation state changes to -1. Since there are two iodine atoms in I₂, each gaining one electron, a total of 2 electrons are gained by iodine.

Sulfur, on the other hand, starts with an oxidation state of +2 in S₂O₃²⁻ and changes to +2.5 in S₄O₆²⁻. As there are four sulfur atoms in 2S₂O₃²⁻ and four sulfur atoms in S₄O₆²⁻, the overall change in the oxidation state of sulfur is (4 x +2.5) - (4 x +2) = 2.

The change in oxidation state of sulfur indicates that it loses 2 electrons, which are subsequently gained by iodine. Therefore, the total number of electrons being transferred in this reaction is 2 (option c).

Learn more about redox reaction here: https://brainly.com/question/459488

#SPJ11

The more-reduced molecules in each pair are: a) ethanol, b) lactate, c) succinate, d) isocitrate, e) malate, and f) 2-phosphoglycerate.


a) Ethanol is more reduced than acetaldehyde because it has more hydrogen atoms and fewer oxygen atoms in its structure.

b) Lactate is more reduced than pyruvate because it has one more hydrogen atom and one less double-bonded oxygen atom.

c) Succinate is more reduced than fumarate due to the presence of two additional hydrogen atoms in its structure.

d) Isocitrate is more reduced than oxalosuccinate because it has one more hydrogen atom and one less double-bonded oxygen atom.

e) Malate is more reduced than oxaloacetate because it has two additional hydrogen atoms.

f) 2-phosphoglycerate is more reduced than pyruvate because it has three more hydrogen atoms and one less double-bonded oxygen atom.

To know more about phosphoglycerate click on below link:

https://brainly.com/question/28610998#

#SPJ11

The density of hydrogen gas at 21°C and 1640 psi is approximately 0.090 g/L.

The ideal gas law can be used to calculate the density of a gas, given its pressure, temperature, and molar mass. Using the ideal gas law and the molar mass of hydrogen, which is 2.016 g/mol, the density of hydrogen gas at 21°C and 1640 psi can be calculated as follows:

[tex]PV = nRT[/tex]

[tex]n = PV/RT[/tex]

[tex]n = (1640 psi) (1 L/14.7 psi) / [(0.08206 L atm/mol K) (294 K)]n = 0.103 mol[/tex]

density = (n x molar mass) / volume

density = (0.103 mol) (2.016 g/mol) / (1 L)

density = 0.090 g/L

learn more about density here:

https://brainly.com/question/29775886

#SPJ11

The best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid).

Fisher Esterification is an organic reaction that involves the conversion of a carboxylic acid and an alcohol to an ester, with a strong acid catalyst, usually sulfuric acid or hydrochloric acid.

In this case, [tex]CH_{3}OH[/tex] serves as the alcohol reactant, which reacts with the carboxylic acid to form the ester. [tex]H_{2}SO_{4}[/tex] acts as the strong acid catalyst, promoting the reaction by protonating the carbonyl oxygen atom of the carboxylic acid.

This makes the carbonyl carbon more electrophilic, allowing the nucleophilic attack by the alcohol's oxygen atom. The reaction then proceeds through a series of steps, including the formation of a tetrahedral intermediate and the loss of a water molecule.

The other reagents mentioned, NaOCH and [tex]CH_{3}L_{1}[/tex], are not suitable for Fisher Esterification. NaOCH is a base, and the reaction requires an acidic catalyst. [tex]CH_{3}L_{1}[/tex] appears to be a typographical error and does not correspond to any known reagent.

In summary, the best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid), as they provide the necessary alcohol and acidic catalyst for the reaction to proceed efficiently.

To know more about Fisher Esterification, refer here:

https://brainly.com/question/31041190#

#SPJ11

the values we have, we get:percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

How to solve the problem?

The first step in determining the percent yield is to calculate the theoretical yield, which is the maximum amount of product that could be produced based on the amount of reactant used in the reaction. To calculate the theoretical yield, we need to use the balanced chemical equation and the molar mass of the reactant and product.

The balanced chemical equation for the reaction is:

Fe₂O₃ + 3H₂→ 2Fe + 3H₂O

From the equation, we can see that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water. The molar mass of H₂ is 2.016 g/mol, and the molar mass of Fe is 55.845 g/mol.

Using this information, we can calculate the theoretical yield of iron as follows:

3.561 g H₂ × (1 mol H₂/2.016 g) × (2 mol Fe/3 mol H2) × (55.845 g Fe/mol Fe) = 31.45 g Fe

This means that if the reaction went to completion, we would expect to obtain 31.45 grams of iron.

The actual yield obtained in the lab was 32.12 grams of iron. The percent yield can be calculated using the following formula:

percent yield = (actual yield/theoretical yield) × 100%

Substituting the values we have, we get:

percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

The percent yield is greater than 100%, which suggests that there may have been some errors or losses during the experiment. This could be due to a number of factors, such as incomplete reaction, loss of product during handling, or measurement errors. It is important to identify and address these sources of error in order to improve the accuracy of the experiment and obtain more reliable results in future trials.

To know more about yield visit :-

https://brainly.com/question/28033398

#SPJ1

Each one of the following includes 0.150mol of solute in a 0.0025M HCI volume.

The space that an item takes up. It is normally assessed in cubic units and estimated and use a variation of formulas. A hexagonal bathtub that also is 1 foot tall, two feet wide, & 4 feet long, for example, has a quantity of 8 cubic meters.

Volumetric flasks, burettes, or pipettes designed for measuring amounts of liquid tend to be the most accurate, of tolerances of less than 0.02. Precision measurements are required in research and testing, and many testing vessels are already designed to login for liquid residue which clings in a flask.

To know more about volume visit :

https://brainly.com/question/24189159

#SPJ1

Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.

Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.

Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.

To know more about chemical shift click here:

https://brainly.com/question/30579222

#SPJ11

As a business, Starbucks must manage several critical risks to ensure its success. One critical risk is the potential for increased competition from other coffee shops and cafes, which could impact its market share and profitability. Additionally, Starbucks must manage the supply chain and operational risks, such as disruptions in the coffee bean supply or issues with its payment systems.

To maintain its success, Starbucks must also manage several key success factors. One important factor is its ability to maintain and grow its customer base, through marketing campaigns and delivering a high-quality customer experience. Additionally, Starbucks must continually innovate and introduce new products and services to stay relevant and meet evolving customer needs. Effective management of these critical risks and success factors is essential for Starbucks to maintain its position as a leader in the coffee industry.

Learn more about Starbucks at  brainly.com/question/11540013

#SPJ11

The correct resonance structures for the compound must be provided to determine the substituent's electron-donating or electron-withdrawing resonance effect.

Resonance structures are used to depict the delocalization of electrons within a molecule. The given compound must have lone pairs and pi bonds that can delocalize throughout the molecule to create resonance structures.

Once the resonance structures are identified, the substituent's electron-donating or electron-withdrawing effect can be determined by examining the electron density around the substituent in each resonance structure.

If the substituent gains electron density in at least one resonance structure, it has an electron-donating effect, whereas if it loses electron density in at least one resonance structure, it has an electron-withdrawing effect.

For more questions like Electron click the link below:

https://brainly.com/question/1255220

#SPJ11

In fact, a Fischer esterification reaction would speed up the reaction. By encouraging the production of the electrophilic carbocation intermediate, which is necessary for ester synthesis, sulfuric acid plays a critical role in activating the Fischer esterification reaction.

a) The reason why adding more sulfuric acid speeds up the reaction is explained in greater detail below: In the Fischer esterification reaction, sulfuric acid serves as the acid catalyst as acetic acid combines with ethanol to produce ethyl acetate.

b) Reaction of Acetyl Chloride with Ethanol: Nucleophilic Attack: The lone pair of electrons on the oxygen of ethanol attacks the electrophilic carbon of acetyl chloride  resulting in the formation of a tetrahedral intermediate.

Thus, a Fischer esterification reaction would speed up the reaction.

Learn more about Chloride, refer to the link:

https://brainly.com/question/34962784

#SPJ3

To form a buffer with a pH of 5.00, you need to dissolve approximately 1.19 g of solid NaCH₃COO in the 500.0 mL solution of 0.200 M CH₃COOH.

To determine the mass of solid NaCH₃COO, you'll first need to calculate the moles of CH₃COO⁻ needed using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

Step 1: Calculate pKa
pKa = -log(Ka) = -log(1.8 × 10⁻⁵) ≈ 4.74

Step 2: Plug in pH, pKa, and [HA]
5.00 = 4.74 + log([CH₃COO⁻]/[0.200 M])

Step 3: Solve for [A⁻]
[CH₃COO⁻] = 0.200 M × 10^(5.00 - 4.74) ≈ 0.229 M

Step 4: Calculate moles of CH₃COO⁻ needed
Moles of CH₃COO⁻ = (0.229 M - 0.200 M) × 0.500 L = 0.0145 mol

Step 5: Determine mass of NaCH₃COO
Mass = 0.0145 mol × 82 g/mol (molar mass of NaCH₃COO) ≈ 1.19 g

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s is approximately 5.39 × [tex]10^{-11[/tex] meters.

To calculate the wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s, you can use the de Broglie equation, which relates the wavelength (λ) to the momentum (p) of a particle:
λ = h / p
where h is Planck's constant (6.626 × [tex]10^{-34[/tex] Js) and
p is the momentum of the electron.

The momentum can be calculated using the equation:
p = m × v
where m is the mass of the electron (9.11 × [tex]10^{-31[/tex] kg) and
v is its velocity (1.35 × [tex]10^7[/tex] m/s).

Step 1: Calculate the momentum:
p = (9.11 × [tex]10^{-31[/tex]kg) × (1.35 × [tex]10^7[/tex] m/s)
p ≈ 1.229 × [tex]10^{-23[/tex] kg m/s

Step 2: Use the de Broglie equation to find the wavelength:
λ = (6.626 × [tex]10^{-34[/tex] Js) / (1.229 × [tex]10^{-23[/tex] kg m/s)
λ ≈ 5.39 × [tex]10^{-11[/tex] m

To know more about "de Broglie equation" refer here:

https://brainly.com/question/30404168#

#SPJ11

Testing for ammonium ion in a separate sample is necessary to avoid interference from other ions present in Group C during evaporation.

The reason why it is necessary to test for the ammonium ion in a separate sample of solution is that it can interfere with the analysis of other cations in Group C.

During the analysis of Group C cations, the solution is usually evaporated to dryness to remove any excess ammonium chloride, which is added to the solution to ensure the complete precipitation of Group C cations. However, if ammonium ion is present in the solution, it can form volatile ammonia gas upon evaporation and interfere with the analysis of other cations by masking their precipitates or changing their color.

By testing for the ammonium ion in a separate sample of solution, it can be determined whether or not it is present before the evaporation step. If it is present, it can be removed or masked before proceeding with the analysis of Group C cations.

Therefore, it is important to test for the ammonium ion separately to ensure accurate and reliable results in the analysis of Group C cations.

Learn more about ammonium ion

brainly.com/question/29781007

#SPJ11

The pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.

To calculate the pH of the solution after 30.0 mL of 0.1 M HCl in the titration of 25.0 ml of 0.1 mL - solution, we need to use the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation relates the pH of a solution to the pKa and the ratio of the concentrations of the conjugate acid and base forms of a weak acid or base:

pH = pKa + log([A-]/[HA])

Where:

pH = the pH of the solution

pKa = the dissociation constant of the weak acid or base

[A-] = the concentration of the conjugate base (F-)

[HA] = the concentration of the weak acid (HF)

In this case, F- is the conjugate base of the weak acid HF. The pKa of HF is 3.17.

First, we need to calculate the moles of F- in the solution before any titrant is added:

moles F- = concentration x volume = 0.1 M x 0.025 L = 0.0025 moles

Next, we need to determine the limiting reactant after 30.0 mL of 0.1 M HCl is added. Since the moles of HCl added is:

moles HCl = concentration x volume = 0.1 M x 0.03 L = 0.003 moles

and the initial moles of F- is 0.0025 moles, we see that HCl is in excess and F- is the limiting reactant.

After adding 30.0 mL of HCl, the total volume of the solution is 25.0 mL + 30.0 mL = 0.055 L. The moles of F- remaining after the reaction is:

moles F- = initial moles - moles HCl reacted = 0.0025 moles - 0.003 moles = -0.0005 moles

Since we cannot have a negative concentration, we know that all of the F- has reacted with the HCl, and we are left with a solution containing only HF and its conjugate acid, H2F+.

The moles of HF formed is equal to the moles of HCl added:

moles HF = moles HCl added = 0.003 moles

The concentration of HF in the final solution is:

concentration HF = moles HF / total volume = 0.003 moles / 0.055 L = 0.0545 M

The concentration of F- in the final solution is:

concentration F- = 0 moles / 0.055 L = 0 M

Now we can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

pH = 3.17 + log(0/0.0545)

pH = 3.17 - infinity

pH = 3.17 (since the log of 0 is negative infinity)

Therefore, the pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.

Learn more about titration

brainly.com/question/31271061

#SPJ11

The degree of dissociation of the lactic acid solution is approximately 0.0000857.

Given that the pKa of lactic acid is 3.08, the approximate degree of dissociation of a .35 M solution of lactic acid can be calculated. The degree of dissociation of an acid is calculated by using the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]).

In this equation, [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid. To calculate the degree of dissociation, the concentration of the conjugate base needs to be known. By rearranging the equation to [A-] = [HA]*10^(pH-pKa) and substituting the given values for the pH and pKa, the concentration of the conjugate base can be calculated.

The concentration of the conjugate base is .35*10^(-3.08) = .0003 M. The degree of dissociation is then calculated as the ratio of the conjugate base concentration to the original acid concentration, which is .0003/.35 = .0000857.

know more about lactic acid here

https://brainly.com/question/10948414#

#SPJ11

The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.

3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate

3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺

Therefore, the substitution product is 3-methyl-3-pentanol.

3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate

3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺

Therefore, the substitution product is 3-methyl-3-hexanol.

To know more about substitution product here

https://brainly.com/question/14052597

#SPJ4

The ocean's deep sound channel is characterized as a zone in which sound waves are able to propagate for long distances with minimal attenuation

It is  due to the unique properties of the water at that depth. The SOFAR layer is located at depths between 800 and 1200 meters, where the water temperature and pressure create a stable environment that allows sound waves to travel with little interference.

This layer acts as a barrier that traps and channels sound waves, allowing them to travel great distances without significant loss of energy. The unique acoustic properties of the SOFAR layer have important implications for oceanography, as it allows for the detection of distant underwater events such as earthquakes, volcanic eruptions, and the movements of marine mammals.

To know more about sofar layer click on below link :

https://brainly.com/question/1177283

#SPJ11

This reaction's equilibrium constant is 0.300.

To solve for the equilibrium constant (Kc), we need to use the concentrations of the reactants and products at equilibrium. We are given the equilibrium concentration of B(g) which is 0.035 M. However, we need to find the equilibrium concentrations of A(g) and C(g).

From the balanced chemical equation, we know that for every 2 moles of A that react, 1 mole of B and 3 moles of C are produced. Let x be the equilibrium concentration of A. Then, using stoichiometry, the equilibrium concentrations of B and C are:

[B] = 0.035 M
[C] = 3x

Since the reaction stoichiometry is 2:1:3 (A:B:C), the equilibrium concentrations in terms of x are:

[A] = 0.115 - 2x
[B] = 0.035
[C] = 3x

Now we can write the expression for the equilibrium constant (Kc):

Kc = ([B]^1[C]^3) / [A]^2

Plugging in the equilibrium concentrations, we get:

Kc = (0.035)(3x)^3 / (0.115 - 2x)^2

Simplifying this expression, we get:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

At equilibrium, the reaction quotient Qc is equal to Kc. Therefore, we can set up an equation to solve for x:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Kc = 3.3 (given)

3.3 = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Solving this equation for x gives us x = 0.020 M. Therefore, the equilibrium concentrations are:

[A] = 0.115 - 2x = 0.075 M
[B] = 0.035 M
[C] = 3x = 0.060 M

Plugging in these values into the expression for Kc gives us:

Kc = (0.035)(0.060)^3 / (0.075)^2

Kc = 0.300

Therefore, the equilibrium constant for this reaction is 0.300.

For more such questions on equilibrium constant , click on:

https://brainly.com/question/3159758

#SPJ11

Therefore, the maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution is 1.5 x [tex]10^{-9[/tex]M.

The maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution, we need to compare the solubility product (Ksp) of nickel(II) hydroxide with the concentration of nickel(II) ions in the solution. The balanced equation for the dissolution of nickel(II) hydroxide is:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp expression for this reaction is:

 [tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp value for nickel(II) hydroxide at 25°C.

If we assume that all of the nickel(II) ions in the nickel(II) nitrate solution will react with hydroxide ions to form nickel(II) hydroxide, then the concentration of nickel(II) ions in the solution will be equal to the initial concentration of nickel(II) nitrate, which is 0.169 M.

Using the Ksp expression, we can calculate the concentration of hydroxide ions required to reach the maximum amount of nickel(II) hydroxide that can dissolve in the solution:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

[tex]1.6 x 10^{-16} = (0.169 M)(x)^2[/tex]

x = 1.5 x [tex]10^{-9[/tex]  M

Learn more about solution Visit: brainly.com/question/25326161

#SPJ4

The reaction of metal ions with dilute NaOH (limited OH-) produces the same result as the reaction with dilute aqueous NH3 because both NaOH and NH3 are Arrhenius bases.

An Arrhenius base is a substance that, when dissolved in water, increases the concentration of hydroxide ions (OH-) in the solution. Both NaOH and NH3 release OH- ions when dissolved in water, which then react with the metal ions to form metal hydroxide precipitates. Since both NaOH and NH3 provide hydroxide ions, they will produce similar results when reacting with metal ions.

Learn more about Arrhenius base here, https://brainly.com/question/27902993

#SPJ11