To rank the compounds in the order of increasing reactivity towards nucleophilic attack, we can consider factors such as steric hindrance, electron-withdrawing groups, and resonance effects.
The compounds are:
1. Chloromethane
2. Chloroethane
3. Chloropropane
The ranking for increasing reactivity towards nucleophilic attack is:
1. Chloromethane (least reactive)
2. Chloroethane
3. Chloropropane
(most based on the fact that the reactivity towards nucleophilic attack increases as the size of the alkyl group increases. Chloromethane has the smallest alkyl group and is therefore the least reactive. Chloroethane has a slightly larger alkyl group and is more reactive than chloromethane. Chloropropane has the largest alkyl group and is the most reactive towards nucleophilic attack.
1. Compound A: Least reactive, with significant steric hindrance and/or strong electron-donating groups that decrease its susceptibility to nucleophilic attack.
2. Compound B: Moderately reactive, having moderate steric hindrance and/or electron-withdrawing groups, allowing for nucleophilic attack but not as readily as compound C.
3. Compound C: Most reactive, with minimal steric hindrance and strong electron-withdrawing groups that make it highly susceptible to nucleophilic attack.
Please provide the specific compounds to give a more accurate ranking.
Learn more about nucleophilic here:
https://brainly.com/question/30713995
#SPJ11
A proton with an initial speed of 8.10×105 m/s is brought to rest by an electric field. A:Did the proton move into a region of higher potential or lower potential? higher potential lower potential
The work done by the electric field on the proton is:W = -ΔPE = -5.36 x 10^-14 J
The proton has a positive charge, and it is brought to rest by an electric field. Therefore, we know that the electric field is directed opposite to the direction of motion of the proton, or in the direction of the force on the proton. The work done by the electric field on the proton can be calculated using the equation:W = -ΔPE.where W is the work done, ΔPE is the change in potential energy, and the negative sign indicates that the electric field is doing work on the proton. Since the proton is brought to rest, its final kinetic energy is zero.
Therefore, the work done by the electric field must be equal to the initial kinetic energy of the proton:W = KEi = 0.5mv^2where m is the mass of the proton and v is its initial speed.Using the given initial speed of the proton, we can calculate its initial kinetic energy:KEi = 0.5mv^2 = 0.5 x 1.67 x 10^-27 kg x (8.10 x 10^5 m/s)^2 = 5.36 x 10^-14 J
Therefore, the work done by the electric field on the proton is:W = -ΔPE = -5.36 x 10^-14 J
Since the electric field is doing work on the proton, the proton is moving into a region of lower potential.
Learn more about proton here:https://brainly.com/question/1481324
#SPJ11
draw the structure of a phosphatidyl choline that contains glycerol, oleic acid, stearic acid, and choline.
Phosphatidylcholine is a type of phospholipid that is commonly found in cell membranes. It is composed of a glycerol backbone, two fatty acid chains (one oleic acid and one stearic acid), a phosphate group, and a choline molecule.
To draw the structure of a phosphatidylcholine that contains glycerol, oleic acid, stearic acid, and choline, follow these steps:
1. Start by drawing the glycerol backbone, which consists of a central carbon atom with three hydroxyl (-OH) groups attached to it.
2. Attach the two fatty acid chains to the glycerol backbone. The oleic acid should be attached to the first carbon atom of the glycerol, while the stearic acid should be attached to the third carbon atom.
3. Draw a phosphate group attached to the second carbon atom of the glycerol backbone.
4. Finally, attach a choline molecule to the phosphate group. The choline molecule consists of a nitrogen atom attached to three methyl groups and a hydroxyl group.
Your final structure of Phosphatidylcholine should look like this:
Oleic acid - O - CH2 - CH - CH2 - C - O - CH2 - CH - (glycerol backbone) - CH - CH2 - COOH
|| ||
|| ||
OH OH
|
P
|
O-
|
CH2 - CH2 - N(CH3)3 - OH
For more such questions on Phosphatidylcholine.
https://brainly.com/question/1258845#
#SPJ11
Calculate the potential of the electrochemical cell and determine if it is spontaneous as written at 25 ∘C . Cu(s) ∣∣ Cu2+(0.13 M) ‖‖ Fe2+(0.0013 M) ∣∣ Fe(s) ∘Cu2+/Cu=0.339 V∘Fe2+/Fe=−0.440 Vcell=Is the electrochemical cell spontaneous or not spontaneous as written at 25 ∘C ?
a. The potential of the electrochemical cell: Cu(s) ∣∣ Cu₂⁺(0.13 M) ‖‖ Fe₂⁺(0.0013 M) ∣∣ Fe(s) as written at 25 ∘C is 0.3094 V.
b. The electrochemical cell is spontaneous as written at 25 ∘C.
To calculate the potential of the electrochemical cell, we can use the formula:
Ecell = E°cell - (0.0592/n) log(Q)
where E°cell is the standard potential of the cell, n is the number of electrons transferred, and Q is the reaction quotient.
For the given electrochemical cell:
Cu(s) ∣∣ Cu₂⁺(0.13 M) ‖‖ Fe₂⁺(0.0013 M) ∣∣ Fe(s)
The number of electrons transferred is 2 (from Cu to Fe).
The reaction quotient can be calculated using the concentrations of the species involved:
Q = ([Fe₂⁺]/[Cu₂⁺])
= (0.0013)/(0.13)
= 0.01
Substituting the values:
Ecell = 0.339 V - (0.0592/2) log(0.01)
Ecell = 0.339 V - 0.0296 = 0.3094 V
Since the potential of the electrochemical cell is positive (0.3094 V), the cell reaction is spontaneous as written at 25 ∘C.
Learn more about electrochemical cell: https://brainly.com/question/12034258
#SPJ11
citric acid, a tricarboxylic acid important in intermediary metabolism, can be symbolized as h3a. its dissociation reactions are
H3A --> H+ + H2A pK1=3.13
H2A --> H+ + HA2- pK2=4.76
HA2- --> H+ + A3+ pK3=6.40 If the total concentration of the acid and its anion forms is 0.02 M, what are the individual concentrations of H3A, H2A, HA2, and A3 at pH 5.2?
The individual concentrations of H3A is 0.0057 M, H2A is 0.451 M, HA2- is 0.0143 M, and A3 is 0.0005 M at pH 5.2 when the total concentration of the acid and its anion forms is 0.02 M.
To find the individual concentrations of H3A, H2A, HA2, and A3 at pH 5.2, we need to use the Henderson-Hasselbalch equation, which relates the pH, pKa, and the concentrations of acid and its conjugate base.
First, let's calculate the ratio of [HA2-]/[H2A] using the pKa2 value and the pH:
pH = pKa2 + log([HA2-]/[H2A])
5.2 = 4.76 + log([HA2-]/[H2A])
log([HA2-]/[H2A]) = 0.44
[HA2-]/[H2A] = 10^0.44 = 2.51
Next, we can use the law of conservation of mass to write equations for the concentrations of each species in terms of x, the concentration of H3A:
[H3A] + [H2A] + [HA2-] + [A3+] = 0.02 M
[H3A] = x
[H2A] = x/(10^(pKa1-pH)) = x/(10^(3.13-5.2)) = 79.1x
[HA2-] = 2.51x
[A3+] = (0.02 M) - x - 79.1x - 2.51x
Now, we can substitute these expressions into the conservation of mass equation and solve for x:
x + 79.1x + 2.51x + (0.02 M) - x - 79.1x - 2.51x = 0.02 M
3.51x = 0.02 M
x = 0.0057 M
Therefore, the individual concentrations of H3A, H2A, HA2, and A3 at pH 5.2 are:
[H3A] = 0.0057 M
[H2A] = 0.451 M
[HA2-] = 0.0143 M
[A3+] = 0.0005 M
For more such questions on Concentrations.
https://brainly.com/question/17086012#
#SPJ11
sort the alkyl halide used to its substitution pattern:1-bromobutane primary 4 2-bromobutane secondary 2-bromo-2-methylbutane tertiary
So, the sorted alkyl halides based on their substitution pattern are: 1-bromobutane (primary), 2-bromobutane (secondary), and 2-bromo-2-methylbutane (tertiary).
What factors affect Alkyl Substitution?The given alkyl halides are 1-bromobutane (primary), 2-bromobutane (secondary), and 2-bromo-2-methylbutane (tertiary). Here's the sorting process:
1. Primary alkyl halide: 1-bromobutane
- This is a primary alkyl halide because the carbon atom bonded to the halogen (bromine) is attached to only one other carbon atom.
2. Secondary alkyl halide: 2-bromobutane
- This is a secondary alkyl halide because the carbon atom bonded to the halogen (bromine) is attached to two other carbon atoms.
3. Tertiary alkyl halide: 2-bromo-2-methylbutane
- This is a tertiary alkyl halide because the carbon atom bonded to the halogen (bromine) is attached to three other carbon atoms.
To know more about Substitution:
https://brainly.com/question/31417178
#SPJ11
how much heat is produced in burning 2 mol of ch4 inder stnadard conditions if reactants and prodcuts ar brought to 298 K and H2O(l) is formed?
496.8 kJ mol⁻¹ heat is produced in burning 2 mol of CH₄ inter standard conditions if reactants and products are brought to 298 K and H2O(l) is formed.
The balanced chemical equation for the burning of CH₄ (methane) is:
CH₄(g) + 2O₂(g) ⇔ CO₂(g) + 2H₂O(l)
According to the equation, for every 1 mol of CH₄ that is burned, 2 mol of H₂O(l) is formed. Therefore, if 2 mol of CH₄ is burned, 4 mol of H₂O(l) is formed.
To calculate the amount of heat produced in the reaction, we need to use the standard enthalpy of formation values for the reactants and products. The standard enthalpy of formation is the change in Hess's Law that occurs when 1 mol of a substance is formed from its elements in their standard states at a specified temperature and pressure (usually 298 K and 1 atm).
Using the standard enthalpy of formation values, we can calculate the heat of reaction (ΔHrxn) using the following equation:
ΔHrxn = ∑nΔHf(products) - ΣnΔHf(reactants)
where ΣnΔHf is the sum of the standard enthalpies of formation for the products and reactants, respectively, and n is the stoichiometric coefficient for each substance in the balanced equation.
For the reaction given, the standard enthalpy of formation values are:
ΔHf(CH₄) = -74.8 kJ mol⁻¹
ΔHf(O₂) = 0 kJ mol⁻¹
ΔHf(CO₂) = -393.5 kJ mol⁻¹
ΔHf(H₂O) = -285.8 kJ mol⁻¹
Substituting these values into the equation, we get:
ΔHrxn = [2(-285.8 kJ mol⁻¹)] - [(-74.8 kJ mol⁻¹) + 2(0 kJ mol⁻¹)]
= -571.6 kJ mol⁻¹ - (-74.8 kJ mol⁻¹)
ΔHrxn = -496.8 kJ mol⁻¹
This means that for every 2 mol of CH₄ that is burned, 496.8 kJ of heat is produced. Since the reaction is carried out at standard conditions (298 K and 1 atm), the heat produced is equal to the change in enthalpy (ΔH) of the reaction. Therefore, if 2 mol of CH₄ is burned, 496.8 kJ mol⁻¹ of heat is produced.
Learn more about Hess's Law here
https://brainly.com/question/16994235
#SPJ11
496.8 kJ mol⁻¹ heat is produced in burning 2 mol of CH₄ inter standard conditions if reactants and products are brought to 298 K and H2O(l) is formed.
The balanced chemical equation for the burning of CH₄ (methane) is:
CH₄(g) + 2O₂(g) ⇔ CO₂(g) + 2H₂O(l)
According to the equation, for every 1 mol of CH₄ that is burned, 2 mol of H₂O(l) is formed. Therefore, if 2 mol of CH₄ is burned, 4 mol of H₂O(l) is formed.
To calculate the amount of heat produced in the reaction, we need to use the standard enthalpy of formation values for the reactants and products. The standard enthalpy of formation is the change in Hess's Law that occurs when 1 mol of a substance is formed from its elements in their standard states at a specified temperature and pressure (usually 298 K and 1 atm).
Using the standard enthalpy of formation values, we can calculate the heat of reaction (ΔHrxn) using the following equation:
ΔHrxn = ∑nΔHf(products) - ΣnΔHf(reactants)
where ΣnΔHf is the sum of the standard enthalpies of formation for the products and reactants, respectively, and n is the stoichiometric coefficient for each substance in the balanced equation.
For the reaction given, the standard enthalpy of formation values are:
ΔHf(CH₄) = -74.8 kJ mol⁻¹
ΔHf(O₂) = 0 kJ mol⁻¹
ΔHf(CO₂) = -393.5 kJ mol⁻¹
ΔHf(H₂O) = -285.8 kJ mol⁻¹
Substituting these values into the equation, we get:
ΔHrxn = [2(-285.8 kJ mol⁻¹)] - [(-74.8 kJ mol⁻¹) + 2(0 kJ mol⁻¹)]
= -571.6 kJ mol⁻¹ - (-74.8 kJ mol⁻¹)
ΔHrxn = -496.8 kJ mol⁻¹
This means that for every 2 mol of CH₄ that is burned, 496.8 kJ of heat is produced. Since the reaction is carried out at standard conditions (298 K and 1 atm), the heat produced is equal to the change in enthalpy (ΔH) of the reaction. Therefore, if 2 mol of CH₄ is burned, 496.8 kJ mol⁻¹ of heat is produced.
Learn more about Hess's Law here
https://brainly.com/question/16994235
#SPJ11
draw any necessary curved arrows to show the reaction between the ketone and hydronium ion.
The reaction between the ketone and hydronium ion is given below which is known as Carbonyl Addition.
A bond-forming or bond-breaking step normally occurs during an elementary reaction. A pair of electrons are transferred from one atom to another during the bond-forming process. A pair of electrons that were formerly shared by two atoms are pulled to one end of the bond or the other during a bond-breaking phase, causing the bond to break and the electrons to land on only one atom.
Oxygen on Carbonyl group attacks Hydronium group protons with one of its lone pairs ==> it results in aldehyde protonated at Oxygen with +1 charge and one lone pair and water molecule (H₂O) with 2 lone pairs.
Depending on whether the molecules are under acidic or basic conditions, these reactions can really happen in a few distinct ways. There are more protons circulating about in acidic circumstances. Protons like to adhere to objects that have lone pairs to share, so they aren't entirely alone.
There aren't many additional protons present under normal circumstances. There might be nucleophilic species like hydroxide ions or others nearby. The compounds known as nucleophile species are those that donate electrons and are drawn to positive charges or electrophiles.
Learn more about Carbonyl;
https://brainly.com/question/30591579
#SPJ4
Why does the carbonyl stretching frequency in the IR spectrum of camphor occur near 1740 cm-1 whereas that of acetophenone (C6H5COCH3) is found at 1680 cm-1 and that for cyclohexanone is found at 1710 cm-1?
The carbonyl stretching frequency in the IR spectrum of camphor occurs near 1740 cm-1, while that of acetophenone is found at 1680 cm-1 and cyclohexanone at 1710 cm-1, primarily due to differences in the electron density and the steric environment around the carbonyl group in these compounds.
In camphor, the carbonyl group is part of a rigid bicyclic structure, which results in less electron delocalization and reduced conjugation. This causes a higher carbonyl stretching frequency, as there is less stabilization of the carbonyl bond, leading to a value near 1740 cm-1.
In acetophenone, the carbonyl group is conjugated with the phenyl ring, which increases electron density around the carbonyl group and stabilizes the bond. This results in a lower stretching frequency, found at 1680 cm-1.
In cyclohexanone, the carbonyl group is in a less-conjugated environment compared to acetophenone but more so than in camphor, causing the stretching frequency to fall in between, at around 1710 cm-1.
Know more about carbonyl stretching frequency here:
https://brainly.com/question/31570822
#SPJ11
How much NaOH solution did you use from the buret. The following data is given: Initial buret reading: 2.80 mL Final buret reading: 15.45 mL 1 18.25 mL 2 12.35 mL 3 12.65 mL 4 13.60 mL
12.65 mL of NaOH solution is used from the burret. Determined from the following data is given: Initial buret reading: 2.80 mL Final buret reading: 15.45 mL 1 18.25 mL 2 12.35 mL 3 12.65 mL 4 13.60 mL
To determine the amount of NaOH solution used from the buret, we need to subtract the initial buret reading from the final buret reading.
Final buret reading - Initial buret reading = amount of NaOH solution used
15.45 mL - 2.80 mL = 12.65 mL
Therefore, 12.65 mL of NaOH solution was used from the buret. The additional data provided (1, 2, 3, and 4) does not have any relevance to this specific question.
Hi! To calculate the amount of NaOH solution used from the buret, you need to subtract the initial buret reading from the final buret reading. In this case:
Final buret reading: 15.45 mL
Initial buret reading: 2.80 mL
Amount of NaOH solution used = Final buret reading - Initial buret reading
Amount of NaOH solution used = 15.45 mL - 2.80 mL
Amount of NaOH solution used = 12.65 mL
So, you used 12.65 mL of NaOH solution from the buret.
Visit here to learn more about NaOH solution : https://brainly.com/question/14296114
#SPJ11
Calculate the ka of a weak acid ha if a 0.19 m aqueous solution of ha has a ph of 4.52 at 25°c.
The Ka of the weak acid HA at 25°C in a 0.19M aqueous solution is 0.0168.
The Ka of a weak acid HA can be calculated using the pH of the solution. The pH of a solution is a measure of the hydrogen ion concentration and is defined as the negative logarithm of the hydrogen ion concentration. At 25°C, a 0.19M aqueous solution of HA has a pH of 4.52.
To calculate the Ka, we must first calculate the hydrogen ion concentration. This can be done by taking the antilog of the negative pH (4.52) which is 0.0032. The Ka of HA can then be calculated as the ratio of the hydrogen ion concentration (0.0032) to the concentration of the acid (0.19). This gives us Ka = 0.0032/0.19 = 0.0168.
know more about aqueous solution here
https://brainly.com/question/26856926#
#SPJ11
Determine the mechanism of nucleophilic substitution of the reaction and draw the products, including stereochemistry. The reaction proceeds by which mechanism?
a. SN1
b. SN2
[tex]SN_{2}[/tex]is the mechanism of the reaction's nucleophilic substitution and the products' stereochemistry.
With an example, what is a nucleophile?
A nucleophile is just a reactant that contributes a two electrons to the formation of a covalent bond. A nucleophile is typically negatively charged or neutral, with a single pair of donatable electrons. Examples include [tex]H_{2} O[/tex] -OMe, and -OtBu.
What are some examples of nucleophiles and electrophiles?
Electrophiles are electron-deficient organisms that could accept a two electrons from an electron-rich organism. Carbocations and alkenes are two examples. A nucleophile is an electron-rich organism that wants to donate electron pairs to electron-deficient organisms. Carbanions, water, ammonia, cyanide ion, and other examples are given.
To know more about nucleophilic visit :
brainly.com/question/30713995
#SPJ1
Write the complete electron configuration for the chromium atom.
Using NOBLE GAS notation write the electron configuration for the nickel atom.
The complete electron configuration for the chromium atom is: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵ 4s¹.
What is electronic configuration?This configuration represents the arrangement of all the electrons in the chromium atom, with the first two electrons occupying the 1s orbital, followed by two electrons in the 2s orbital, six electrons in the 2p orbital, two electrons in the 3s orbital, six electrons in the 3p orbital, five electrons in the 3d orbital, and one electron in the 4s orbital.
The noble gas notation for the electron configuration of the nickel atom is: [Ar] 3d⁸ 4s². This notation represents the configuration of electrons in the nickel atom by using the symbol for the noble gas argon (Ar) to represent the electron configuration up to the preceding noble gas configuration. In this case, the electron configuration of argon is 1s² 2s² 2p⁶ 3s² 3p⁶, so we use the symbol [Ar] to represent this configuration. The remaining electrons in the nickel atom are eight electrons in the 3d orbital and two electrons in the 4s orbital.
Learn more about electron configuration here:
brainly.com/question/29757010
#SPJ1
which salts will be more soluble in an acidic solution than in pure water? baso3 caso4 cd(oh)2 pbi2 kclo4
Among the given salts, the one that will be more soluble in an acidic solution than in pure water is [tex]KClO_{4}[/tex] (potassium perchlorate).
This is because [tex]KClO_{4}[/tex] is a strong oxidizing agent and can react with water to form perchloric acid ([tex]HClO_{4}[/tex]), which is a strong acid. The presence of excess [tex]H^{+}[/tex] ions in the acidic solution will decrease the solubility of many salts, but in the case of [tex]KClO_{4}[/tex], it will increase the solubility due to the formation of the highly soluble potassium perchlorate salt.
On the other hand, the other salts mentioned in the question, [tex]BaSO_{3}[/tex](barium sulfite), [tex]CaSO_{4}[/tex](calcium sulfate), [tex]Cd(OH)_{2}[/tex] (cadmium hydroxide), and [tex]PbI_{2}[/tex] (lead iodide), are all sparingly soluble or insoluble in pure water and will remain so in an acidic solution.
Learn more about acidic solution
https://brainly.com/question/16926229
#SPJ4
express sp in terms of molar solubility, , for the salts with the given formulas.ab(s) sp= ab2(s) sp= ab3(s) sp= a3b2(s) sp=
Sp in terms of molar solubility for ab(s) is s², ab₂(s) is 4s₃, ab₃(s) is 27s⁴, and a₃b₂(s) is 108s⁵.
1. For AB(s):
Let the molar solubility of AB be 's'. When it dissolves, it forms A+ and B- ions. So the equilibrium concentrations are:
[A+] = s
[B-] = s
Ksp = [A+][B-] = (s)(s) = s²
2. For AB2(s):
Let the molar solubility of AB2 be 's'. When it dissolves, it forms A+ and 2B- ions. So the equilibrium concentrations are:
[A+] = s
[B-] = 2s
Ksp = [A+][B-]² = (s)(2s)² = 4s³
3. For AB3(s):
Let the molar solubility of AB3 be 's'. When it dissolves, it forms A+ and 3B- ions. So the equilibrium concentrations are:
[A+] = s
[B-] = 3s
Ksp = [A+][B-]³ = (s)(3s)³ = 27s⁴
4. For A3B2(s):
Let the molar solubility of A3B2 be 's'. When it dissolves, it forms 3A+ and 2B- ions. So the equilibrium concentrations
[A+] = 3s
[B-] = 2s
Ksp = [A+]^3[B-]² = (3s)³(2s)² = 108s⁵
Learn more about molar solubility:
https://brainly.com/question/27132799
#SPJ11
As shown in Table 8.1 why does citric acid have three pKa measurements listed, while malic acid has two lactic and acetic acids each have one?
Citric acid has three pKa measurements listed because it is a triprotic acid, meaning it has three acidic hydrogen atoms that can be donated as protons.
Malic acid has two pKa measurements since it is a diprotic acid with two acidic hydrogen atoms. Lactic and acetic acids each have one pKa measurement because they are both monoprotic acids, having only one acidic hydrogen atom to donate.
The pKa value of an acid indicates the strength of its acidic properties and the degree to which it can donate protons in solution. The number of pKa values for an acid corresponds to the number of dissociable hydrogen atoms it has, with each dissociation yielding a different pKa value. In general, acids with multiple pKa values are more complex than monoprotic acids and can undergo stepwise dissociation reactions.
Understanding the pKa values of different acids is important in various fields, including chemistry, biochemistry, and pharmacology, where it can affect the behavior of molecules and their interactions with other substances.
Learn more about Citric acid: https://brainly.com/question/10796161
#SPJ11
Determine [oh−][oh−] of a solution that is 0.230 mm in hco3−hco3−.
The [OH⁻][OH⁻] of a solution that is 0.230 mM in HCO₃⁻ can be calculated using the equilibrium expression for the bicarbonate ion.
The chemical equation for the dissociation of bicarbonate ion is:
HCO₃⁻ + H₂O ⇌ H₂CO₃ + OH⁻
The equilibrium constant expression for this reaction can be written as:
K = [H₂CO₃][OH⁻] / [HCO₃⁻]
Since the concentration of H₂CO₃ is negligible in this case, we can assume that [H₂CO₃] ≈ 0. Therefore, the equilibrium constant expression can be simplified as:
K = [OH⁻][HCO₃⁻]
We can rearrange this equation to solve for [OH⁻]:
[OH⁻] = K / [HCO₃⁻]
The equilibrium constant for this reaction (K) is 2.4 × 10⁻⁴ at 25°C.
Substituting the values given in the problem, we get:
[OH⁻] = (2.4 × 10⁻⁴) / 0.230 = 1.04 × 10⁻³ M
Therefore, the [OH⁻][OH⁻] of the solution is 1.04 × 10⁻⁶.
learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
If a non-cyclic alkane shows a molecular ion peak at m/z 492, what is the chemical formula?
Complete the formula:
CnHy
n=_____ carbon atoms
y=_____ hydrogen atoms
The molecular ion peak indicates the molecular weight of the compound. In this case, the non-cyclic alkane has a molecular weight of 492. To determine the chemical formula, we need to know the number of carbon and hydrogen atoms in the molecule.
The formula for a non-cyclic alkane is CnH2n+2. The "+2" represents the two additional hydrogen atoms needed to satisfy the valency of carbon.
To find the number of carbon atoms in the molecule, we can divide the molecular weight by the atomic weight of carbon (12.01). 492/12.01 ≈ 41.
Therefore, the chemical formula for this non-cyclic alkane is C41H84.
n= 41 carbon atoms
y= 84 hydrogen atoms.
A non-cyclic alkane, molecular ion peak, and chemical formula.
If a non-cyclic alkane shows a molecular ion peak at m/z 492, you can determine the chemical formula using the general formula for alkanes, which is CnH(2n+2).
Step 1: Use the given molar mass (492) to create an equation.
12n + (2n+2)(1) = 492
Step 2: Simplify the equation.
12n + 2n + 2 = 492
Step 3: Combine like terms.
14n + 2 = 492
Step 4: Subtract 2 from both sides.
14n = 490
Step 5: Divide by 14 to find the number of carbon atoms (n).
n = 490 / 14
n = 35 carbon atoms
Step 6: Calculate the number of hydrogen atoms (y) using the alkane formula.
y = 2n + 2
y = 2(35) + 2
y = 70 + 2
y = 72 hydrogen atoms
So, the chemical formula for the non-cyclic alkane with a molecular ion peak at m/z 492 is CnHy, where n=35 carbon atoms and y=72 hydrogen atoms. Your answer: C35H72
Visit here to know more about molecular weight:
brainly.com/question/27988184
#SPJ11
Calculate the pH of a solution containing an amphetamine concentration of 245 mg/Amphetamine (C9H13N) is a weak base with a pKb of 4.2.
The pH of the solution containing 245 mg/L of amphetamine is approximately 9.87.
The pH of the solution containing 245 mg/L of amphetamine (C₉H₁₃N) can be calculated using the following steps:
Convert the concentration of amphetamine from mg/L to mol/L:
245 mg/L ÷ 135.21 g/mol =[tex]1.811 * 10^{-3[/tex] mol/L
Calculate the concentration of hydroxide ions ([OH⁻]) using the base dissociation constant (Kb):
Kb = [BH⁺][OH⁻]/[B][tex]10^{-pKb[/tex] = [OH⁻][B]/[BH⁺][tex]10^{-4.2[/tex] = [OH⁻]²/([C₉H₁₃N][H₂O])Assuming that [OH⁻] << [C₉H₁₃N], the equation simplifies to:
[OH⁻] ≈ √(Kb[C₉H₁₃N]) = √(2.51 × 10⁻⁵ × 1.811 × 10⁻³) = 7.43 × 10⁻⁵ mol/LCalculate the concentration of hydrogen ions ([H+]) using the equation:
Kw = [H⁺][OH⁻]
10⁻¹⁴ = [H⁺][7.43 × 10⁻⁵]
[H⁺] = 1.35 × 10⁻¹⁰ mol/L
Calculate the pH using the equation:
pH = -log[H⁺]
pH = -log(1.35 × 10⁻¹⁰) = 9.87
Therefore, the pH of the solution containing 245 mg/L of amphetamine is approximately 9.87. Since the pKb of amphetamine is relatively low, it behaves as a weak base and the resulting pH of the solution is basic.
Learn More about pH
https://brainly.com/question/26424076
#SPJ4
calculate the concentration of i−i− in a solution obtained by shaking 0.16 mm kiki with an excess of agcl(s)agcl(s) .
The I- ion concentration in the solution produced by shaking 0.16 mM KI with an excess of AgCl(s) is 0.16 M.
How to determine ion concentration?The solubility product constant for AgCl is given by:
Ksp = [Ag+][Cl-] = 1.77 x 10⁻¹⁰
Since AgCl is an ionic solid, it dissociates in water to produce Ag+ and Cl- ions:
AgCl(s) ⇌ Ag+(aq) + Cl-(aq)
When AgCl is added to the KI solution, a precipitation reaction occurs:
Ag+(aq) + I-(aq) ⇌ AgI(s)
The Ksp expression for AgCl can be used to calculate the concentration of Ag+ ions produced when AgCl dissolves in the solution:
Ksp = [Ag+][Cl-] = [Ag+]([Ag+] + [I-])
Since AgCl is considered to be insoluble, the concentration of [Ag+] can be assumed to be very small and can be neglected in the expression. Therefore, the concentration of [I-] can be approximated to be equal to the concentration of [Cl-]:
Ksp = [Ag+][Cl-] = [Cl-]²
Solving for [Cl-]:
[Cl-] = √(Ksp) = √(1.77 x 10⁻¹⁰) = 1.33 x 10⁻⁵ M
Since the KI solution is a 0.16 M solution, the concentration of [I-] can be approximated to be 0.16 M (assuming that the solubility of KI is much greater than AgCl). Therefore, the concentration of [I2-] can be calculated using the following equation:
[I2-] = 2[Ag+] = 2[Cl-] = 2(1.33 x 10⁻⁵) = 2.66 x 10⁻⁵ M
Thus, the concentration of I- ions in the solution obtained by shaking 0.16 mM KI with an excess of AgCl(s) is 0.16 M.
Find out more on ion concentration here: https://brainly.com/question/29301321
#SPJ1
Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100^\circ C.100∘C. Air approaches the tube bank in the normal direction at 20^\circ C20∘C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged staggered with longitudinal and transverse pitches of S_L = S_T = 4 cm.SL=ST=4cm. There are 20 rows in the flow direction with 10 tubes in each row. Determine (a) the rate of heat transfer, (b) and pressure drop across the tube bank, and (c) the rate of condensation of steam inside the tubes. Evaluate the air properties at an assumed mean temperature of 35^\circ C35∘C and 1 atm. Is this a good assumption?
(a) The rate of heat transfer is approximately 25.63 kW.
(b) The pressure drop across the tube bank is approximately 294.53 Pa.
(c) The rate of condensation of steam inside the tubes is approximately 0.023 kg/s.
(a) To calculate the rate of heat transfer, first find the overall heat transfer coefficient (U) using the Nusselt number and thermal conductivity of air. Next, find the total heat transfer area (A_t) using the tube diameter and number of tubes.
Finally, use the log mean temperature difference (LMTD) method to find the heat transfer rate (Q) using the formula Q = U * A_t * LMTD.
(b) To calculate the pressure drop, first find the drag coefficient (C_d) and then use the formula ΔP = (1/2) * ρ_air * V² * Σ(C_d) to calculate the pressure drop across the tube bank, where ρ_air is the air density and V is the mean velocity.
(c) To determine the rate of condensation of steam, use the heat transfer rate (Q) calculated in part (a) and divide it by the latent heat of vaporization (h_fg) of steam at the given temperature. This will give you the mass flow rate of condensation (m_cond).
Assuming air properties at 35°C and 1 atm is reasonable, as it represents the average temperature between the initial and final temperatures of the air in this process.
To know more about Nusselt number click on below link:
https://brainly.com/question/31139431#
#SPJ11
Describe the general solubility of NH3 in water with respect to temperature.
Is KI dissolves in water, does this represent an increase or decrease in entropy
The dissolution of ammonia chloride in water decreases with increase in temperature.
Dissolution of KI in water represents the increase in entropy.
Generally as the temperature of ammonium solution increases, the hydrogen bonding present becomes weaker as the NH₃ molecules are no longer capable of binding with the more energetic H₂O molecules. Therefore, the gas's solubility usually decreases with an effective increase in temperature.
Basically dissolution of a solute normally increases the entropy by effectively spreading the solute molecules and also the thermal energy that the solute molecules contain through the larger volume of the solvent. Hence, entropy increases with dissolution.
Learn more about dissolution from the link given below.
https://brainly.com/question/23851972
#SPJ1
for the reaction 2a → 2b c, the rate constant value was determined to be 0.020 m/min. the initial concentration of a was 0.50 m. calculate the concentration of a after 7.0 minutes.
For reaction 2a → 2b + c, the given rate constant value is 0.020 m/min.
As the unit of the rate constant is molarity/min, therefore it will be a zero-order reaction.
Since this is a zero-order reaction, the rate of the reaction is constant and independent of the concentration of a.
Here, the rate of the reaction is equal to the rate constant (k) as shown below.
Rate of reaction = k = 0.020 M/min
We can use the rate law equation for zero-order reactions to calculate the concentration a after a certain time:
Rate = -Δ[A]/Δt
= k[A]^0
= k
here [A] is the concentration of a at any given time.
To solve for [A], one can rearrange the equation:
Δ[A] = -kΔt
[A]t = [A]0 - kΔt
Here;
[A]t is the concentration of a after time t
[A]0 is the initial concentration of a
Δt is the time elapsed
Putting the given values in the above equation:
[A]t = 0.50 M - (0.020 M/min)(7.0 min)
[A]t = 0.50 M - 0.14 M [A]t
[A]t = 0.36 M
Therefore, the concentration of a after 7.0 minutes is 0.36 M.
https://brainly.com/question/30752435?referrer=searchResults
#SPJ11
Calculate the molarity when 345.0g of Na2SO4, is dissolved to make a 1.650L. solution. (include units and round to 4 sig figs)
Answer:
Therefore, the molarity of the solution is 1.471 M (molar)
Explanation:
To calculate the molarity of a solution, we need to know the moles of solute (Na2SO4) and the volume of the solution (in liters).
First, let's calculate the moles of Na2SO4:
molar mass of Na2SO4 = 2(22.99 g/mol) + 1(32.06 g/mol) + 4(16.00 g/mol) = 142.04 g/mol
moles of Na2SO4 = (mass of Na2SO4) / (molar mass of Na2SO4)
moles of Na2SO4 = 345.0 g / 142.04 g/mol
moles of Na2SO4 = 2.430 mol
Next, let's calculate the molarity of the solution:
Molarity = (moles of solute) / (volume of solution in liters)
Molarity = 2.430 mol / 1.650 L
Molarity = 1.471 M
Therefore, the molarity of the solution is 1.471 M (molar)
Question 6 of 10
How can the rate constant be determined from the rate law?
A. The rate constant can be calculated from the exponents of the
concentrations.
B. The rate constant is the same thing as the reaction rate for the
reaction.
C. The rate constant is the reaction rate divided by the concentration
terms.
D. The rate constant is the reaction rate multiplied by the
concentration terms.
The rate constant can be calculated from the exponents of the concentrations. Therefore, the correct option is option A.
The chemical kinetics rate law, which connects the molecular concentration of reactants with reaction rate, uses the rate constant as a proportionality factor. The letter k in an equation designates it, which is also referred to as either the consequence rate constant and reaction rate coefficient. The rate constant can be calculated from the exponents of the concentrations.
Therefore, the correct option is option A.
To know more about rate constant, here:
https://brainly.com/question/20305871
#SPJ1
How does the magnitude of Hmix compare with the magnitude of Hsolute+Hsolvent for exothermic solution processes?
A) The magnitude of Hmix will be larger than the magnitude of Hsolute+Hsolvent .
B) The magnitude of Hmix will be equal to the magnitude of Hsolute+Hsolvent .
C) The magnitude of Hmix will be smaller than the magnitude of Hsolute+Hsolvent
The magnitude of Hmix compared with the magnitude of Hsolute+Hsolvent for exothermic solution processes is Option C- The magnitude of Hmix will be smaller than the magnitude of Hsolute+Hsolvent,
For exothermic solution processes, the overall enthalpy change is negative (i.e. heat is released). The enthalpy change for mixing (Hmix) is typically negative for an ideal solution, meaning that energy is released when the solute and solvent are mixed together.
The enthalpy change for solvation (Hsolute+Hsolvent) is also negative, as energy is released when the solute particles interact with the solvent particles. Since both Hmix and Hsolute+Hsolvent are negative for exothermic solution processes, the magnitudes of the two enthalpy changes will be additive. Hence , option C is correct.
Learn more about exothermic process here:
https://brainly.com/question/2924714
#SPJ11
An unsaturated hydrocarbon (CsHs) undergoes Markovnikov's rule to give (A). Compound (A) is hydrolysed with aqueous alkali to yield (B). When (B) is treated with PBrs, compound (C) is produced. (C) reacts with AgCN (alc.) to give another compound (D). The compound (D) if reduced with LIA/H, produce (E).
An unsaturated hydrocarbon (CsHs) undergoes Markovnikov's rule to give (A). Compound (A) is hydrolysed with aqueous alkali to yield (B). When (B) is treated with PBrs, compound (C) is produced. (C) reacts with AgCN (alc.) to give another compound (D). The compound (D) if reduced with LIA/H, produce (E).
First, we know that the unsaturated hydrocarbon CsHs undergoes Markovnikov's rule. This means that the more electronegative atom will add to the carbon with the fewer hydrogen atoms. Based on this information, we can assume that compound A is a product of the addition of a proton and a more electronegative atom (such as a halogen or oxygen) to the unsaturated hydrocarbon.
Compound A is then hydrolyzed with aqueous alkali to yield compound B. This suggests that compound A contains a functional group that is susceptible to hydrolysis by base, such as an ester or an amide.
When compound B is treated with PBrs, compound C is produced. PBrs is a reagent used to test for the presence of halogens in a compound. This suggests that compound B contains a halogen, possibly added in the addition reaction with the unsaturated hydrocarbon.
Compound C reacts with AgCN (alc.) to give another compound, D. AgCN (alc.) is a reagent commonly used for the synthesis of nitriles from halides. This suggests that compound C contains a halogen atom that can be replaced by a cyano group (CN-) to form a nitrile.
Finally, compound D can be reduced with LIA/H to produce compound E. LIA/H is a reducing agent commonly used for the reduction of nitriles to primary amines. This suggests that compound D is a nitrile, which can be converted to a primary amine via reduction.
Hence, we can infer that the unsaturated hydrocarbon CsHs undergoes addition with a more electronegative atom according to Markovnikov's rule to form compound A. Compound A is then hydrolyzed to form compound B, which contains a halogen. Compound B is then converted to a nitrile (compound C) using PBrs, and compound C is converted to a primary amine (compound D) via reaction with AgCN (alc.) and subsequent reduction with LIA/H to produce compound E.
To know more about Markovnikov's rule here
https://brainly.com/question/30274769
#SPJ1
a 30 ml sample of 0.15m hydrazine (kb =1.3x10-6) is being titrated with 0.2m hclo4. what is the when 10 ml of acid are added after the equivalence point?
By considering the concentrations of these two species as well as the p K an of the weak acid, the Henderson-Hasselbalch equation enables you to determine the pH of a buffer solution that comprises a weak acid and its conjugate base.
Hypochlorous acid (HClO), in your situation, is the weak acid. One of its salts, potassium hypochlorite, or KClO, introduces the hypochlorite anion, the conjugate base of the compound, into the solution.Make an educated guess as to what the solution's pH will be in relation to the acid's p K a before performing any calculations. Be aware that the log term will equal zero if the weak acid and conjugate base concentrations are equal.
To know more about Henderson-Hasselbalch, click here:
https://brainly.com/question/13423434
#SPJ4
What is the ph of a weak base with a concentration of 0.66m? kb=8.6*10^-10
The pH of the weak base with a concentration of 0.66 M and Kb value of 8.6 x 10⁻¹⁰ is 9.28.
To find the pH of a weak base, we first need to use the equilibrium constant expression for its reaction with water to calculate the hydroxide ion concentration.
The equilibrium constant expression for the reaction of a weak base, B, with water is:
Kb = [BH⁺][OH⁻] / [B]
Assuming that the initial concentration of the weak base is the same as its equilibrium concentration, we can write:
Kb = x² / (0.66 - x)
where x is the concentration of OH⁻ ions formed when the weak base dissociates.
Since the weak base is weak, we can assume that x is much smaller than 0.66, so we can simplify the equation:
Kb = x² / 0.66
Solving for x, we get:
x = √(Kb x 0.66) = √(8.6 x 10⁻¹⁰ x 0.66) = 1.9 x 10⁻⁵ M
Now, we can use the fact that pH + pOH = 14 to calculate the pH:
pOH = -log[OH⁻] = -log(1.9 x 10⁻⁵) = 4.72
pH = 14 - pOH = 9.28
To know more about equilibrium constant click on below link:
https://brainly.com/question/31321186#
#SPJ11
the following structure does not obey the octet rule. group of answer choices A. co2 B. so3 C. cbr4 D. ccl4 E. co32-
The structure that does not obey the octet rule is C. cbr4. This is because carbon tetrabromide (CBr4) has a central carbon atom surrounded by four bromine atoms. Each bromine atom forms a single covalent bond with the central carbon atom, resulting in a total of four covalent bonds.
However, bromine atoms have seven valence electrons, and carbon has only four valence electrons. Therefore, in CBr4, the central carbon atom has only eight electrons in its valence shell instead of the required eight electrons to satisfy the octet rule B. SO3 (Sulfur Trioxide).
A. CO2 (Carbon Dioxide) - Carbon forms double bonds with both Oxygen atoms, achieving a stable octet for each atom.C. CBr4 (Carbon Tetrabromide) - Carbon forms single bonds with four Bromine atoms, resulting in a stable octet for each atom.D. CCl4 (Carbon Tetrachloride) - Similar to CBr4, Carbon forms single bonds with four Chlorine atoms, leading to a stable octet for each atom.E. CO3^2- (Carbonate Ion) - Carbon forms double bonds with one Oxygen atom and single bonds with the other two Oxygen atoms. Each Oxygen atom has two lone pairs, while the singly-bonded Oxygens carry a -1 charge each, resulting in a stable octet for all atoms.
In SO3, Sulfur forms double bonds with three Oxygen atoms. While the Oxygen atoms achieve stable octets, the Sulfur atom ends up with 12 electrons in its valence shell, thus not obeying the octet rule.
To learn more about covalent bonds:- https://brainly.com/question/10777799
#SPJ11
50cm3 of hydrogen is collected over water at 17∘C and 750 mm Hg pressure. Calculate the volume of dry gas at S.T.P. The water vapour pressure at 17∘C is 14 mm Hg.
The volume of the dry gas at STP is equal to the number of moles of hydrogen collected at 17°C and 750 mmHg multiplied by 0.0821 L atm/K mol divided by 760 mmHg/101.3 kPa.
Assuming that the hydrogen collected is a dry gas, the volume of the gas at STP can be calculated using the Ideal Gas Law. The Ideal Gas Law states that pressure multiplied by volume is equal to the number of moles of a gas multiplied by the universal gas constant and the temperature.
In this case, the given pressure is 750 mmHg and the temperature is 17°C. The water vapour pressure at 17°C is 14 mmHg, so the total pressure of the system is 750 mmHg - 14 mmHg = 736 mmHg. The universal gas constant is 0.0821 L atm/K mol.
To calculate the volume of the dry gas at STP, the Ideal Gas Law can be rearranged to make volume the subject.
Volume (at STP) = Number of moles (at 17°C and 750 mmHg) x 0.0821 L atm/K mol / (101.3 kPa x 760 mmHg/101.3 kPa).
Know more about dry gas here
https://brainly.com/question/20494871#
#SPJ11