Radio waves and microwaves have A.)low frequency and long wavelength.
What type of frequency and wavelength do radio and microwaves have?
Microwaves are classified as radio waves, but they have higher frequencies than other radio waves. And so with higher frequencies, they also have more energy. That's is the reason, microwaves are useful for heating food in microwave ovens.
Microwaves have a long wavelength, but not as long as radio waves. The atmosphere of earth is transparent to some wavelengths of microwave radiation. The longer wavelengths pass through the atmosphere of earth more easily than the shorter wavelength microwaves.
Radio waves have photons with the low energies and microwaves have more energy as compared to radio waves.
To know more about radio and microwaves, refer
https://brainly.com/question/1959549
#SPJ1
Convert newton into dyne.
newton is the S.I. unit of force.
dyne is the C.G.S. system of force.
[tex]{ \blue{ \tt{newton = kg {m}^{ - 2}}}}[/tex]
[tex]{ \blue{ \tt{dyne = gcm {s}^{ - 1}}}} [/tex]
[tex]{ \red{ \sf{ \frac{newton}{dyne}}}} = { \green{ \sf{ \frac{10 { \cancel g^{2}} \times 10 { \cancel{cm^{3}}} }{ \cancel{gcm}}}}}[/tex]
[tex]{ \red{ \sf{ \frac{newton}{dyne} }}}= { \boxed{ \purple{ \sf{{10}^{5} \: dyne}}}}[/tex]
Answer:
Explanation:
1 Newton = 100,000 dynes
F = m·a
[ F ] = 1 N = 1 kg · 1 m/s² = 1000 g · 100 cm/c² = 1000·100 g·cm / s²
= 100,000 g·cm / c² = 100,000 dines
A motorcyclist heading east accelerates after he passes a sign post at x=0m marking the city his acceleration is constant a= 4m/s2 at time=0 he is 5m east of the sign post and has a velocity of v=15 m/s where is the motorcyclist when his velocity is 25m/s
Answer:
55m east of the sign post
Explanation:
Use this equation
final velocity^2 = initial velocity^2+2(a)(x) x is displacement.
Substitute values:
25^2= 15^2+ 2(4)(x)
625=225+8x
x=50 m
REMEMBER TO ADD INITIAL DISPLACEMENT!!!! :D
Displacement (positive is east in this case)
=50 m+ 5m
=55m.
So the answer is the motorcyclist is 55m east of the sign post.
A grandfather clock is operated by a slowly falling mass attached to a pulley system. Winding the clock lifts the mass up again. A typical grandfather clock has a 0.750 kg mass that can fall and be lifted a height of 1.80 m. Calculate the increase in gravitational potential energy of the mass when the clock is wound.
13.23 joule is gravitational potential energy of the mass when the clock is wound.
potential energy, p = mgh
m= 0.750 kg
h= 1.80 m
g=9.8 m/s²
p = mgh
p=0.750×1.80 m×9.8 m/s²
p=13.23 joule
Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy. It is capable of performing more work when raised. Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has greater potential energy as they get further apart.
Potential energy develops in systems having components whose configurations, or relative positions, determine the amount of the forces they apply to one another.
To know more about potential energy visit : brainly.com/question/28988147
#SPJ9
what is solenoid? define solenoid in simple words
[tex]{ \red{ \underline{ \green{ \sf{solenoid}}}}}[/tex]
Solenoid is a coil of circular turns made up of insulated copper wire wrapped closely in the cylindrical form
solenoid is formed by circular turns of copper wire in cylinder form
Explain clearly about hydrogeological Map
Hydrogeological maps bring basic geological information together with data on the hydraulic and hydrochemical characteristics of the rocks and their usefulness for groundwater supply.
need these answered with explanation please, i need this asap.
1. a. Frequency of the wave is equal to 2 cycles per second.
Wavelength of the wave is equal to 1.5 m.
2.a. The frequency of the wave is 3 cycles per second.
b, It is a longitudinal wave of wavelength is equal to 40 cm.
What is wave?An energy disturbance in a medium without net particle mobility is referred to as a wave. Among the probable manifestations are elastic deformation, pressure changes, variations in electric or magnetic intensity, electric potential, and temperature changes.
From picture 1.
1. a. frequency of the wave is = 2 cycles per second.
Wavelength of the wave is = 3 m/2 =1.5 m.
From picture 2.
2.a. As it moves forward and backward 3 times in very second, frequency of it is given by 3 cycles per second.
b, It is a longitudinal wave of wavelength is 40 cm.
Learn more about wave here:
https://brainly.com/question/3639648
#SPJ1
Shandra is studying Earth's magnetic field in her science class. She leams that a giant shield around her planet protects all living things from dangerous charged particles from the sun.
How does the magnetic field protect life on Earth?
O A. The magnetic field directs charged particles toward the poles and then past Earth.
O B. The magnetic field directs charged particles toward the equator and then past Earth.
O C. The magnetic field absorbs the charged particles coming from the sun.
O D. The magnetic field directs charged particles toward the poles then absorbs them.
The magnetic field protect life on Earth by directing the charged particles toward the poles and then past Earth.
The giant shield around Earth that protects all living things from dangerous charged particles from the sun is called as Earth's magnetosphere. It is generated by the motion of molten iron in Earth's core. It also provides the basis for navigation using a compass.
The magnetosphere shields the life on Earth from the constant bombardment by charged particles emitted from the sun which is called as solar wind.
Therefore, the magnetic field protects life on Earth by directing the charged particles toward the poles and then past Earth.
To know more about Earth's magnetosphere
https://brainly.com/question/10424668
#SPJ9
A football is kicked by a place kicker. The average force on the
ball is 240 N and the impact lasts for a time interval of 0.25s.
Calculate the change in the ball's momentum.
The change in momentum of the ball that is kicked by a force of 240 N over a time interval of 0.25 s is 60 Ns.
What is change in momentum?Change in momentum can be defined as the product of force and time.
To calculate the change in momentum of the ball, we use the formula below.
Formula:
ΔM = Ft.............. Equation 1Where:
ΔM = Change in momentumF = Forcet = TimeFrom the question,
Given:
F = 240 Nt = 0.25 sSubstitute these values into equation 1
ΔM = 240×0.25ΔM = 60 NsHenece, the change in momentum of the ball is 60 Ns.
Learn more about Change in momentum here: https://brainly.com/question/8618043
#SPJ1
"The first event in Weightlifting competition is called the Snatch. [...] This lift is done with tremendous power and speed, the bar being lifted from the floor to arms length overhead in one motion, a motion which generally takes less than a second. Amazingly, the heaviest male weightlifters in the world are able to snatch more than 210 kg! (source)
An athlete is lifting 130 kg to a height of 2.45 meters in 0.5 seconds. How much power does he expend?
The power expended by the athlete is determined as 6,242.6 J/s.
What is average power?
The average power of an object can be defined as the proportion of overall work or activity performed by the body to the total time spent by the body.
The unit of average power is watt or joules per second.
Average power is calculated by dividing total energy spent by the total time taken.
Mathematically, the formula for average power is written as;
P = Energy / time
The work done by the athlete or the gravitational potential energy of the weight lifted by the athlete to the given height is calculated as follow;
Energy = P.E = mgh
where;
m is the mass lighth is the vertical heightg is acceleration due to gravityEnergy = 130 x 9.8 x 2.45
Energy = 3121.3 J
Power = 3121.3 J / 0.5 s
Power = 6,242.6 J/s
Learn more about power here: https://brainly.com/question/20137708
#SPJ1
Which quantities (initial horizontal speed, initial vertical speed, range, flight time, or maximum height) are proportional to the square of the initial velocity?
(This is about angled projectiles)
(Include an explanation please)
Range and Maximum height are proportional to the square of the initial velocity.
In projectile motion, Range of the particle is the horizontal distance travelled by the projectile between launch and the landing points and is denoted as R,
R = u^2sin2θ/g
Here u is initial velocity.
Maximum height is the maximum height from the point of projection, a projectile can reach.
And at maximum height (h) attained, velocity of the object is zero (v=0)
we can use , v^2 - (u sinθ)^2= 2ah (acceleration due to gravity is a= -g)
Or 0 - (u sinθ)^2 = 2(-g)h
⇒ h = u^2 sin^2 θ / 2g
To know more about projectile motion here
https://brainly.com/question/11261462
#SPJ1
Which of the following is accurate when discussing specific heat?
A) Specific heat values for solids will never vary for different ranges of temperature.
B) The specific heat of a gas can be measured at constant pressure.
C) Specific heat values for liquids will never vary for different ranges of temperature. D) The specific heat of a gas can be measured at constant volume only.
The statement indicating that the specific heat of a gas can be measured at constant pressure is accurate when discussing specific heat (Option B).
What is the specific heat of a gas?The specific heat of a gas is a measurement that makes reference to the relative molecular position of the molecules in a substance in the gas state, which is a state of matter where particles are more separated in space when compared with liquid and solid states.
Moreover, specific heat can be defined as the amount of heat energy that may be able to increase the temperature of 1 gr (gram) of a given material to 1 Celssius degree.
Therefore, with this data, we can see that the specific heat of a gas depends on the temperature and it expresses a given amount of heat energy in a substance or material.
Learn more about the specific heat here:
https://brainly.com/question/27991746
#SPJ1
A 0.80 m wide door turns though an angle of 45°. How long is the arc of the displacement?
O 1.0 m
O 0.80 m
O 0.63 m
O 0.45 m
Answer:
below
Explanation:
If it went for 360° it would swing through the ENTIRE circumference = 2 pi r
= 2 pi ( .8 ) =5.026 m
but it only swings through 45 of the 360
45 / 360 * 5.026 = .63 m
look at the two models of charges
Answer: im looking
explination
What are the smaller bulbs called?
Answer:
E10 Miniature Edison Screw (MES) Also called “Miniature Screw
The smaller light bulbs are the E5 Lilliput Edison Screw (LES).
What are the common light bulb base sizes ?
Today, there are many applications that make substantial use of light bulbs. Lighting bulb bases come in a wide variety.
Based on the letter-number references, you can tell what size light bulb base it is. In contrast to the number, which designates the base's breadth, the first letter indicates the base's shape or form.
Following are the most typical diameters for light bulb bases:
Standard-Medium, normal sized screw in base: E26 or E27
Candelabra, a smaller screw in base: E12
Intermediate: E17
Bi-pin, having pin-in base including two points of contact: G4 or GU24
Twist-And-Lock base: GU10
To learn more about light bulbs from the given link
https://brainly.com/question/2740728
#SPJ4
A block with mass 0.100 kg is moving to the left with velocity of -2.3 m/s on a frictionless surface. This mass proceeds to then slide into a spring, with spring constant of 1700 N/m
1. Draw a force diagram while the mass is interacting with the spring
2. What is the maximum compression of the spring (in cm)?
3. What is the velocity of the mass after bouncing off the spring
0.0135 cm distance is the maximum compression of the spring.
mass=0.1 kg
velocity=2.3 m/s = 230 cm/s
spring constant, k= 1700 N/m
F=Kx
x=F/k
x=ma/k
x=0.1×230÷ 1700
x= 0.0135 cm
Distance is the length between two locations or things, independent of direction. Since distance is a scalar property, it only takes into consideration the total magnitude and ignores the start and finish positions. Since distance is a scalar attribute, it can only have a positive or zero value; it cannot have a negative value.
The most common unit of measurement for distance is the meter (m), while larger distances can also be stated in kilometers (km), while smaller distances can be expressed in centimeters (cm) or millimeters (mm). When calculating distance, the letter D is often used to represent the distance traveled.
To know more about distance visit : brainly.com/question/12626613
#SPJ1
What energy is always conserved
Answer:
Renewable Energy took a test on this not to long ago!
PLEASE GIVE BRAINLIEST THANK YOU!!!
Calculate the combined mass of the two people if the tension of the cable is 1205.4 N
Answer:
Let
T
be the tension of the cable and m
g
be the force of gravity. If the upward direction is positive, then Newton’s second law is T−mg=ma, where a is the acceleration. Thus, the tension is T=m(g+a). We use constant acceleration kinematics (Table 2-1) to find the acceleration (where v=0 is the final velocity, v
0
=−12m/s is the initial velocity, and y=−42m is the coordinate at the stopping point). Consequently, v
2
=v
0
2
+2ay leads to
a=−
2y
v
0
2
=−
2(−42m)
−12m/s
=1.71m/s
2
We now return to calculate the tension:
T=m(g+a)
=(1600kg)(9.8m/s
2
+171m/s
2
)
=1.8×10
4
N
Answer:
Explanation:
Given:
P = 1205.4 N
g = 9.8 m/s²
___________
m - ?
m = P / g
m = 1205.4 / 9.8 ≈ 123 kg
A basketball spins on a player’s finger. The basketball starts with an initial rotational speed of 15 rad/s and stops spinning in 7.2 seconds. Find the angular displacement of the ball as it comes to a stop.
Answer:
Angular displacement ≈ 54 rad
Explanation:
Given:
φ₀ = 0
ω₀ = 15 rad/s
ω = 0
t = 7.2 s
___________
φ - ?
Rotational motion equation:
φ = φ₀ + ω₀·t + ε·t² / 2
Angular acceleration:
ε = (ω - ω₀) / t = ( 0 - 15 ) / 7.2 ≈ - 2.08 rad/s²
Angular displacement :
φ = φ₀ + ω₀·t + ε·t² / 2 = 0 + 15·7.2+ (-2.08)·7.2² / 2 ≈ 54 rad
A very light ideal spring with a spring constant (force constant) of 2.5N/cm pulls horizontally on an 18-kg box that is resting on a horizontal floor. The coefficient of static friction between the box and the floor is 0.65, and the coefficient of kinetic friction is 0.45. How long is the spring just as the box is ready to move? If the spring pulls the box along with a constant forward velocity of 1.75m/s, how long is the spring? how long is the spring if it pulls the box forward at a constant 2.75m/s?
(a) The length of the spring just as the box is ready to move is 5.1cm
(b) The length of the spring when it is pulled forward at a constant velocity of 1.75 m/s is 47.0 cm
(c) The length of the spring when it is pulled forward at a constant velocity of 2.75 m/s is 73.8 cm
What is the length of the spring just as the box is ready to move?The length of the spring just as the box is ready to move is calculated by applying the principle of conservation of energy.
work done by static friction = elastic potential energy of the spring
μmgx = ¹/₂kx²2
μmg = kx
x = 2μmg/k
where;
k is spring constant = 2.5 N/cm x 100 cm/m = 250 N/mμ is coefficient of static friction
g is the acceleration due to gravity
x is an extension of the spring
x = 2μmg/kx = (2 x 0.65 x 18 x 9.8) / 250x
= 0.051 m
x = 5.1 cm.
The length of the spring when it is pulled forward at a constant velocity of 1.75 m/s.elastic potential energy of spring = kinetic energy of the box
¹/₂kx² = ¹/₂mv² kx² = mv² x²
= mv²/kx
= √(mv²/k)
where;
m is the mass of the box
v is the speed of the box
x is the length of the spring
x = √(18 x 1.75²/250)x = 0.470 mx = 47.0 cm
The length of the spring when it is pulled forward at a constant velocity of 2.75 m/s.x = √(mv²/k)x = √(18 x 2.75²/250)
x = 0.738 m
x = 73.8 cm
Learn more about length of spring here:
https://brainly.com/question/28615861
#SPJ1
Two 1kg masses as distance D as part each exerted a gravitational attraction Force on the other one. If 1kg is now add to each mass the gravitational attraction exerted by each would be
Answer:
Explanation:
m₁ = m₂ = m
m₁' = 2m₁ = 2m
m₂' = 2m₂ = 2m
F₁₂ = G·m₁·m₂ / D² = G·m² / D²
F'₁₂ = G·m'₁·m'₂ / D² = G·2m·2m / D² = 4·G·m²/ D = 4·F₁₂
Gravitational pull increased 4 times
how would the shape of electric field lines change if you increased the voltage across the electrodes
Answer:
Explanation:
If the electric field is inhomogeneous, then the magnitude of the strength (and voltage) is determined by the density of the field lines: where the field lines are thicker, the field strength is greater
An airplane on a runway accelerates at 4.0 meters/second^2 for 28.0 seconds before takeoff. How far does the plane travel on the runway before
takeoff?
Answer:1568 meters
Explanation:
we will make a speed time graph and we will calculate the speed by multiplying acceleration with time and we will have the speed then we will draw it on the speed time graph this will make a triangle and we will calculate its area and we will have the distance.
A 1500 kg car is traveling down the highway. If the force of air friction on the car is 250
N, with what force must the engine push forward on the car to keep it accelerating at 3
m/s²?
a. 4250 N
b. 4750 N
c. 14,450 N
d. 14,950 N
Answer:
b. 4750 N
Explanation:
F = ma
F = (1500)(3)
F = 4500 N
Force Total = Fa - Ff
4500 = Fa - 250
Fa = 4750 N
A__is the best example or representation of a concept.
A prototype is the best example or representation of a concept, which is used as a design to shape a device.
What is a prototype?A prototype can be defined as a given design in its experimental stage which is very useful to shape the framework or idea to carry out.
Therefore, with this data, we can see that a prototype can be very useful to shape an idea or concept about a given device in particular.
Complete question:
Fill in the blank. A _____ is the best example or representation of a concept.
Learn more about a prototype here:
https://brainly.com/question/27896974
#SPJ1
What do we call the number of waves that pass by a given point in one
second?
OA. The wavelength
OB. The frequency
о C. The amplitude
о D. The period
URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!
Answer:
1. B (graph A) 2. A (graph D) 3. D (graph B) 4. C (graph C)
Explanation:
1. Graph A gives the relationship between the speed of a car and time. Over time, the speed of the car is decreasing (moving closer to 0). Therefore, the car is slowing down.
2. Graph D gives the relationship between the distance of a car and time. Over time, the distance the car has traveled is increasing at a steady rate. Because the distance is changing, we know the car is moving. And because the slope of the line is constant, the car is moving at a constant speed.
3. Graph B gives the relationship between the distance of a car and time. This distance is not changing over time, meaning that if the car started 5 meters away, the car is still 5 meters away. Therefore, the car is not moving.
4. Graph C gives the relationship between speed and time. The speed is increasing, and therefore not constant. This means that the car is either speeding up or slowing down. Since speed is increasing (the inverse of graph A), we know the car is speeding up. When an object is speeding up, the velocity/speed and the acceleration have the same sign (both positive or negative). Our speed values are all positive, so our acceleration must also be positive.
A girl rides her bicycle 1.40 kilometers west, 0.70 kilometer south, and 0.30 kilometer east in 12 minutes. The vector diagram below represents the girl's fist two displacements in sequence
from point P. The scale used in the diagram is 1.0 centimeter = 0.20 kilometer.
8. Determine the measure of the angle, in degrees, between the resultant and the 1.40-
kilometer displacement vector.
Answer:
See below
Explanation:
For a right triangle, remember that tan = opposite leg / adjacent leg:
The angle will be found by using the inverse tangent function
arctan ( .3/1.4) = 12°
The measure of the angle, in degrees, between the resultant and the 1.40-kilometer displacement vector is 12.
What is vector?In physics, a vector is a quantity with both magnitude and direction. It is often represented by an arrow whose length is proportional to the magnitude of the quantity and whose direction is the same as that of the quantity.
A vector does not have position, while having magnitude and direction. In other words, a vector's shape is unaltered if it is shifted parallel to itself as long as its length is unaltered.
Ordinary quantities with a magnitude but no direction are referred to as scalars in contrast to vectors. For instance, while speed (the amount of velocity), time, and mass are scalars, displacement, velocity, and acceleration are vector quantities.
Therefore, The measure of the angle, in degrees, between the resultant and the 1.40-kilometer displacement vector is 12.
To learn more about vectors, refer to the link:
https://brainly.com/question/13322477
#SPJ2
A man with a weight of 740N is standing on one leg. His foot is exerting 2312.5 N/m2 of pressure onto the ground. What is the surface area of the bottom of his foot?
Answer:
he surface area of the bottom of his foot is 3.2 m2.
Explanation:
A body moving with uniformly acceleration A has two point (5,15) and ( 20,60) on the velocity time graph of its motion. Calculate A. Pls I would like if the graph can be drawn I have the workings
Answer:
3 m/s
Explanation:
The slope of a velocity-time graph will give the acceleration for the object over the given interval.
Finding the slope:
[tex]a = \frac{y_2 - y_1}{x_2 - x_1} = \frac{60 - 15}{20 - 5} = \frac{45}{15} = 3\\[/tex]
The acceleration A would be 3 m/s
A car is traveling at 18.25 meters per second for 5.27 seconds. How far did it travel in meters? Round your answer to two decimal places. A car is traveling at 18.25 meters per second for 5.27 seconds. How far did it travel in meters? Round your answer to two decimal places.