Question:
Define work.
​

Answer: 31 N

Explanation:

Forces in the y-direction (Fn and Fg) are balanced. (ΣFy = 0)

ΣFx = Fa- Ff = 37N - 6N = 31N

Skyler velocity after throwing the snowball  is 9.34 m/s in forward direction.

A body's velocity is the rate at which its displacement alters with respect to time. A vector quantity with both magnitude and direction is velocity. The meter/second unit of measurement for velocity.

Given that Skyler whose mass is 74.5 kg is moving across at 9.52 m/s while holding a 2.05 kg carefully packed snowball.

forward speed of the snowball = 15.9 m/s.

Let the Skyler velocity after throwing the snowball = v.

According to principle of conservation of momentum;

Total initial momentum = total final momentum

⇒ (74.5 + 2.05)9.52 = 74.5×v + 15.9×2.05

⇒ 74.5×v  = (74.5 + 2.05)9.52  - 15.9×2.05

⇒ v = 9.34 m/s.

Hence, velocity of the Skyler  is 9.34 m/s. in forward direction.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

The greater efficiency achieved with the curved blades of a Pelton wheel is due to the fact that the curved shape of the blades allows them to more effectively capture and use the energy of the water jet.

In a Pelton wheel, water is jetted through a nozzle onto the blades of a turbine, which rotates and converts the energy of the water jet into mechanical work. The shape of the blades plays a significant role in the efficiency of the turbine. Curved blades are more efficient than straight blades because they can capture and use more of the kinetic energy of the water jet.

The curved shape of the blades creates a more efficient flow of water over the surface of the blade, which allows the blade to extract more energy from the water jet. This results in a higher torque and power output from the turbine, leading to a more efficient conversion of water energy into mechanical work.

Learn more about Pelton Wheel here:

https://brainly.com/question/20038787

#SPJ4

(1) The initial velocity in the y-direction is 9.64 m/s.

(2) The final velocity in the x-direction is 11.5 m/s.

(3)  The range, xb, of the ball is 22.6 m.

(4) The maximum height reached by the ball is 4.74 m.

The initial vertical component of the velocity is calculated using the following kinematic equation.

Vy = V sinθ

where;

Vy = V sinθ

Vy = ( 15 m/s ) x ( sin 40 )

Vy = 9.64 m/s

The final velocity in the x-direction is calculated as follows;

Vₓf = Vxi = V cosθ

where;

Vₓf  = ( 15 m/s ) x ( cos 40 )

Vₓf  = 11.5 m/s

The range of the ball is calculated as follows;

R = v² sin (2θ) / g

R = ( 15² sin (2 x 40) ) / 9.8

R = 22.6 m

The maximum height reached by the ball is calculated as;

H = v² sin²θ / 2g

H = ( 15² x ( sin 40 )² ) / (2 x 9.8)

H = 4.74 m

Learn more about maximum height of projectile here: https://brainly.com/question/12870645

#SPJ1

The time interval during which the speed of the wheel is increasing is 4 s.

The temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per square second.

The angular velocity at time t = 0, is ω₁ = - 6.00 rad/s.

The angular velocity at time t = 10.0 s, is ω₂ = +4.00 rad/s.

= ( 4.00 - (-6.00))/10 rad/s²

= 1.0 rad/s²

Hence, angular velocity becomes zero at time = ( 0 - ( -6))/1.0 s = 6 s.

So, during t = 0 to t = 6s, the clockwise angular velocity of the wheel decreases from 6.00 rad/s to 0.00 rad/s and  during t = 6s to t = 10s , the counterclockwise angular  velocity of the wheel increases from 0.00 rad/s to +4.00 rad/s.

Hence,  the time interval during which the speed of the wheel is increasing is = 10 s - 6 s = 4 s.

To know more about angular velocity visit:-

https://brainly.com/question/30084436

#SPJ4

All electromagnetic waves travel at the same speed in a vacuum, which is 300,000 km/sec (186,000 mph). This results from the electromagnetic waves' oscillating nature.

In general, we say that light moves in waves and that all electromagnetic radiation moves through a vacuum at a speed of around 3.0 * 108 meters per second. Nothing can move faster than the speed of light, which is what we refer to as.

The universal scientific constant known as c—the speed of light in a vacuum—is significant in many branches of physics. The exact value of the speed of light, c, is 299,792,458 meters per second.

To know more about electromagnetic waves visit:-'

https://brainly.com/question/3101711

#SPJ4

The system is open, because there is a net force exerted on the block.

An individual strolling, a taking off baseball, a piece tumbling from a table and a charged molecule in an electric field are instances of dynamic energy at work. An item that isn't moving has zero motor energy.

The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

According to question:

On graphing free body diagram of the problem

There is a force = mgsin(37°)

So, the it is a open system.

To know more about kinetic energy visit:

brainly.com/question/26472013

#SPJ4

"The volume of 0.15 mol of an ideal gas at 365 torr and 97 °C is calculated to be 9.5 L."

The ideal gas law asserts that the pressure, volume, and temperature of an ideal gas are all directly correlated. An ideal gas is a fictitious gas that adheres to this law.

Given the number of moles, temperature, and pressure, the ideal gas law can be used to determine the volume of an ideal gas.

The ideal gas law equation is, PV = nRT.

When the equation is rearranged to account for volume, the result is

V = nRT/P. Plugging in the given values, the volume of 0.15 mol of an ideal gas at 365 torr and 97 °C is 9.5 L.

To know more about volume:

https://brainly.com/question/30115702

#SPJ4

The plot of v²kin versus d, where, v is the velocity of motion and d is the distance travelled, is a graph of a quadratic equation, which is a parabola. The correct option is 1 a.

1 a, Parabola

A quadratic equation is an equation of the form a·x² + b·x + c = 0, which is an algebraic equation with a second degree of x.

The motion of a body in free fall can be described using the following equation;

v² = u² - 2·g·h

d = u·t - 0.5·g·t²

Therefore; v² = 0² - 2·g·d = 2·g·d

v² = 2·g·d

d = v²/(2·g)

Where; g = The acceleration due to gravity ≈ 9.8 m/s²

Therefore; d ≈ v²/(2 × 9.8)

The above equation is a quadratic equation, and the graph of the equation, which is a graph of a quadratic equation is parabolic.

Please find attached the graph of v²/(2×9.81) to d, creates with MS Excel

From the shape of the graph and the function of the graph, the graph is a parabola

Learn more about quadratic equation here:

https://brainly.com/question/776122

#SPJ1

The acceleration of the car can be obtained as  0.26 m/s^2. The force required to ove it a distance of 30 m is 11760 N.

We know that the acceleration is the change in the velocity of the object with time. Now we know from the Newton law that the force is the product of the mass of the object and the acceleration.

Now we have that;

weight = mass * acceleration due to gravity

mass = weight/ acceleration due to gravity

mass = 12,000 N / 10 m/s^2

= 1200 Kg

The we know that;

Force = mass * acceleration

acceleration = Force/mass

=  310 N/1200 Kg

= 0.26 m/s^2

For the force that that is needed to move the car a distance of 30 m we have;

F = ma

= 1200 Kg * 9.8 m/s^2

= 11760 N

This is the force that ca move the object forward.

Learn more about distance:https://brainly.com/question/13034462

#SPJ1

When the alternative interior angles of two lines cut by a transversal line are equal, they are parallel.

Alternate interior angles are two angles on the inside side that are opposite each other. When the alternate exterior angles of two lines cut by a transversal line are equal, they are parallel. Alternate external angles are two angles on the outside that are opposite each other. Four sorts of angles are created when parallel lines are sliced by a transversal. Examine the diagram below to identify the many pairs of angles and their relationships. The picture depicts two parallel lines 'a' and 'b' separated by a transversal 'l'.

Learn more about angles here-

https://brainly.com/question/13966790

#SPJ4

The picture and the pre-image are consistent ONLY when the scale factor is 1.

A sort of transformation known as a dilatation enlarges or shrinks a figure (referred to as the preimage) to produce a new figure (called the image). How much larger or smaller the dilation image will be in comparison to the preimage depends on the scale factor, r.

The scale factor and the center of dilation are used to determine the dilation transformation. The image stretches if the scaling factor is greater than 1.

To know more about pre-image visit:-

https://brainly.com/question/1809747

#SPJ4

The final pressure of the gas is 3atm.

As given in the question,

The volume of the gas at point 1  ( [tex]V_1[/tex]) is 1000 [tex]cm^3[/tex]

The volume of the gas at point 2 ( [tex]V_2[/tex]) is 3000[tex]cm^3[/tex]

The pressure of the gas ([tex]P_2[/tex]) is 1 atm

For an isothermal process , the temperature of the system remains constant so,

The formula to find the pressure of the gas is

   [tex]P_1V_1=P_2V_2[/tex]                                                                      ----(1)

Where

[tex]V_1[/tex] is the volume of the gas at point 1

[tex]V_2[/tex] is the volume of the gas at point 2

[tex]P_1[/tex] is the pressure of the gas at point 1

[tex]P_2[/tex] is the pressure of the gas at point2

now substitute the values given in the question in the equation (1),

[tex]P_1V_1=P_2V_2\\P_1 =\frac{ P_2V_2}{V_1}[/tex]

=>[tex]P_1[/tex] = [tex]\frac{1\times 3\times10^{-3} }{1\times 10^{-3} }[/tex]

=> [tex]P_1[/tex] = 3

Pressure is 3 atm

To learn more about Isothermal compression:

https://brainly.com/question/27476852

#SPJ4

Answer:

1.Opening and shutting a door

2.Squeezing water out of wet clothes

3.Punching a pillow

4.Stomping your foot

5.Pushing a manual mower

6.Ripping a piece of paper

7.Crushing a ball of dough

8.Pulling out an ingrown hair from your leg

9.Pulling a light chain

10.Smacking a horses butt to signal it to "GIDDIE UP!"

Explanation:

The  bright and dark pattern happen when light goes through the two slits because of interference of light.

When two coherent light waves from separate sources collide, the energy distribution caused by the first wave is altered by the second. The term "interference of light" refers to this alteration in the distribution of light energy brought on by the superposition of two light waves.

The conditions of interference of light are:

Learn more about interference here:

https://brainly.com/question/15587985

#SPJ1

According to the Newtons third law of motion, the collision between the bumper car and the rider will affect both of them as both the systems have mass and are moving with certain velocities.

Collision is a case where one moving object or person violently collides with another.

The law of interaction or the Newton's third law of motion, says that if one body exerts a force on a second body, the second body exerts a force equal in magnitude and opposite in direction on the first body.

As we know momentum is P = m*v i.e. momentum (P) is directly proportional to the mass and velocity.

Heavier bodies have more mass, therefore have more momentum.

here, the bumper car is the heavy system and hence, it will exerts more impact on the rider.

To know more about collision,

https://brainly.com/question/7593984

#SPJ4

The power that will be produced by such a force is 12 times the initial power.

Power can be defined as the time rate of doing work. Also power can be defined as the energy expended per unit time.

Mathematically, the formula for power expended by an object is given as;

p = E / t

where;

p = w / t

where;

When a force does six times as much work in half as much time, the power becomes;

p' = (6w) / (¹/₂t)

p' = (2 x 6w) / t

p' = 12w/t

p' = 12 (p)

Learn more about power here: https://brainly.com/question/10590812

#SPJ1

The complete question is below:

a force produces power p by doing work w in a time t what power will be produced by a force that does six times as much work in half as much time?

When magnesium becomes a 2+ ion its becomes cation that is positive charge.

Due to its 12 protons and membership in group 2 of the periodic table, magnesium possesses two electrons in its outer shell (positive charges)

We know that ionic substances consist of two ions, one of which is a positive cation and the other is a negative anion. For instance, cations and anion are produced when we divide ionic substances into their individual ions.

(a), Breaking of [tex]$\mathrm{MgBr}_2$[/tex] into ions '

[tex]\left.\mathrm{MgBr}_2_(aq) \longrightarrow \mathrm{Mg}_{(\mathrm{aq})}^{2+}+2 \mathrm{Br}_{\left(a q_1\right)}{ }^2\right[/tex]

Cation formula [tex]$=Mg^{2+} (a q)$[/tex]

Anion Formula [tex]$=\mathrm{Br}^{\ominus}(a q)$[/tex]

For more such question on magnesium.

https://brainly.com/question/27798376

#SPJ4

The force of sliding is the force required to keep an object moving at a constant velocity while it is sliding on a surface.

This force is equal in magnitude to the force of friction acting between the object and the surface, but opposite in direction. The force of friction acts between two surfaces that are in contact and is directed opposite to the direction of motion. When an object is sliding on a surface, the force of friction acts to slow the object down and eventually bring it to a stop.

If the object is moving at a constant velocity, the force of friction is equal in magnitude to the force applied to the object, but opposite in direction. This force is known as the force of sliding.

Learn more about Sliding force here:

https://brainly.com/question/29244084

#SPJ4

Voltage divided by current equals resistance (R=VI R = V I). Ohm's Law (E = IR) is as basic to electronics students as Einstein's Relativity equation (E = mc2) is to physicists.

When written down, voltage = current x resistance, or volts = amps x ohms, or V = A x. According to Ohm's law, the current flowing through a conductor between two places is proportional to the voltage across the two points. According to Ohm's law, the current flowing through a conductor between two places is proportional to the voltage across the two points. The formula for Ohm's law is V I. As a result, V = RI, where R is a constant known as resistance.

Learn more about voltage here-

https://brainly.com/question/13396105

#SPJ4

Radio waves are the types of EM radiation with the lowest energy, longest wavelengths, and lowest frequencies.

For more information on radio waves kindly visit to

https://brainly.com/question/28874040

#SPJ4

Answer:

Conduction is the answer!!!

Explanation:

(can you try to help me with my most recent questions) ty

The new acceleration of the truck  for the same driving force is 21.5  m/s^2.

The definition of force in physics is: The push or pull on a massed object changes its velocity.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. A spring balance can be used to calculate the Force. Newton is the SI unit of force.

Given that: A loaded truck can accelerate at 4.3m/s^2.

It loses its load so that it is only 0.2 as massive.

As force = mass × acceleration, the new acceleration of the truck for same driving force is =  (4.3 ÷ 0. 2) m/s^2

= 21.5  m/s^2

Hence, the new acceleration of the truck is 21.5  m/s^2.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

Answer:

is constant

Explanation:

When an object is moving with uniform circular motion, the object’s tangential speed is constant.

The number of ejected electrons in a photoelectric effect experiment can be calculated using the following formula:

What are electrons?

An electron is a subatomic particle that has a negative electric charge. It is one of the fundamental building blocks of matter, along with the proton and neutron. Electrons are found in the outermost region of an atom, called the electron cloud or electron shell.

number of ejected electrons = intensity of light * time of exposure

where intensity of light is the intensity of the light beam (usually measured in watts per square meter), and time of exposure is the length of time that the light beam is shone on the metal surface.

Alternatively, the number of ejected electrons can be calculated using the following formula:

number of ejected electrons = current * time of exposure

where current is the current flowing through the circuit (usually measured in amperes), and time of exposure is the length of time that the light beam is shone on the metal surface.

Therefore, the number of ejected electrons is proportional to the intensity of the light beam and the length of time that it is shone on the metal surface.

To learn more about electrons from the given link:

https://brainly.com/question/26084288

#SPJ4

Answer:

E = 0.0096 N/C

Explanation:

E = I/σπr²

I = 40 mA = 0.04A

σ silver = 6.29X10⁷ /Ωm

r = 0.29 mm/2 = 0.145 mm = 1.45x10⁻⁴ m

E = 0.04A / (6.29X10⁷ /Ωm)(π)(1.45x10⁻⁴ m)² = 0.0096 N/C

*sorry, don't have time to calculate electron drift velocity for you!

The needed force is therefore F=ma=15000.5=750 N. The car accelerates at 3 m/s2 and needed 4500 N of force to get to the destination 5 seconds after starting,

the car reaches a speed of 5 metres per second.

The sports car weighs 1500 kilogrammes.

The sports car's acceleration is equal to 5 m/s2.

Therefore, let F be the force acting upon it.

The rate of doing labour is called power. Work is the result of the applied force and the distance travelled along the force's direction by the moving body accelerates.

The formula for Newton's second law must be used to compute the force, and the specified values must be entered into the formula. So let's get going. Car weight is 1500 kg. Speed is equal to 10 m/s2.

To learn more about accelerates  please click on below link

https://brainly.com/question/12550364

#SPJ4