Question 79
What is the horizontal part of the stairs you step on called?
a. Riser b. tread
c. Step
d. Footer

The IPv4 header is an essential part of the internet protocol that is used to deliver data packets across networks. The header is responsible for providing crucial information about the packet, such as the source and destination IP addresses, the packet length, and the protocol used.

For such more question on protocol

https://brainly.com/question/28811877

#SPJ11

According to the National Electrical Code (NEC) Section 314.18(c), when using nonmetallic sheathed cable or multi-conductor Type UF cable with a single box not larger than 2 1/4" x 4" mounted in walls or ceilings, the cable shall be fastened within 8 inches.

According to NEC 314.18(c), where nonmetallic sheathed cable or multi-conductor Type UF cable is used with a single box not larger than 2 1/4" X 4" mounted in walls or ceilings, the cable shall be fastened within 8 inches of the box .This means that the cable must be securely fastened to the framing or other structural members within 8 inches of the box, in order to prevent it from being pulled or otherwise damaged. The purpose of this requirement is to ensure that the cable is properly supported and protected, which helps to prevent electrical hazards and maintain the integrity of the electrical system.

Learn more about conductor here-

https://brainly.com/question/18084972

#SPJ11

It is important to always use caution when handling network devices, especially if they are damaged or malfunctioning. If in doubt, it is always best to consult a qualified technician or IT professional for assistance.

A faulty network device can create a source of hazard for a user in the following ways: Electric shock: If a network device is not properly grounded or has exposed wires or components, it can create a risk of electric shock to the user if they come into contact with it. This can be especially dangerous if the user is handling the device while it is powered on or connected to a power source. Fire hazard: If a faulty network device overheats or experiences a short circuit, it can create a risk of fire hazard to the user and their surroundings. This can be especially dangerous if the device is located in an area with flammable materials or if the user is unable to quickly disconnect the device from the power source.

Learn more about network devices here:

https://brainly.com/question/30011906

#SPJ11

True. The neutral conductor of a balanced 4 wire wye circuit that is at least 50 percent loaded with nonlinear loads is not considered a current-carrying conductor for bundle adjustment factors.  

Nonlinear loads cause the current on the neutral to be higher than the current on each phase conductor. This means the neutral conductor carries current that is not part of the load and does not contribute to heating. Therefore, it is not necessary to apply bundle adjustment factors to the neutral conductor in this situation. However, if the neutral conductor is undersized, it can still overheat and cause problems, so it must be appropriately sized.

learn more about current here:

https://brainly.com/question/15019375

#SPJ11

SDRAM DIMMs typically have 1 notch, which indicates that it has 168 pins.

SDRAM DIMMs (Synchronous Dynamic Random Access Memory Dual Inline Memory Modules) have a single notch, which indicates that it has 168 pins. The notch is a cutout on the bottom edge of the DIMM, which helps to ensure that it is installed in the correct orientation in the memory slot.

The number of pins and the notch position on a DIMM may vary depending on the type of memory, but for SDRAM DIMMs, the single notch is a standard feature. SDRAM DIMMs are commonly used in desktop computers and servers to provide high-speed memory access.

You can learn more about SDRAM DIMMs at

https://brainly.com/question/30364933

#SPJ11

True. all PLC models offer some form of counter instruction as it is an essential tool for automation and control.

Programmable Logic Controllers (PLCs) are designed to perform automation tasks and they often need to keep track of various events and processes occurring in a system.

Counters are one of the essential instructions that are used in PLC programming to keep track of such events.

Counters are used to count pulses, events, or other actions, and they are available in various types and forms in different PLC models.

Most PLC models offer some form of counter instruction as it is a fundamental feature in PLC programming.

The counter instruction is used to increment or decrement a counter value based on a specified condition or input signal.

It is an important tool for controlling the flow of the program, and it can be used for a wide range of applications such as counting parts, tracking the number of times a machine has cycled, or monitoring the production rate of a system.

Therefore, it can be concluded that almost all PLC models offer some form of counter instruction as it is an essential tool for automation and control.

Learn more about PLC models

brainly.com/question/30469449

#SPJ11

c. an original exception that was caught before the current exception was thrown.

Chained exceptions in Java allow a programmer to trace the original cause of an exception. When an exception is caught, it can be chained with another exception using the constructor of the new exception. This helps in providing more information about the cause of the exception. The chained exception contains information about the original exception, including its type, message, and stack trace. This is useful for debugging as it provides a complete picture of the exception's chain of events, making it easier to find the root cause of the problem. Chained exceptions are not specific to checked or unchecked exceptions and can be used with any type of exception.

Learn more about original exception here:

https://brainly.com/question/17465629

#SPJ11

Fuel dispensing equipment circuits must include an interlock that cuts power to the dispenser in the event of tampering with or disconnecting the dispenser from the system.

The purpose of this criterion, as stated in section 514.11 of the National Electrical Code (NEC), is to avoid electrical risks connected with petrol dispensing equipment. In the event of tampering or disconnecting, an interlock is a mechanism that is intended to cut off power to the dispenser. This is important because petrol vapors may readily catch fire or explode. As a result, the interlock acts as a safety mechanism to stop electrical risks and safeguard both clients and staff at petrol station dispensers.

learn more about dispensing equipment circuits here:

https://brainly.com/question/31563084

#SPJ11

In time-temperature defrost controls, the temperature that actuates the control is the temperature of the evaporator coil. These controls combine both time and temperature parameters to initiate the defrost cycle, ensuring efficient operation of the refrigeration system.

In time-temperature defrost controls, the temperature that actuates the control is the temperature of the evaporator coil. Time-temperature defrost controls are commonly used in refrigeration systems to prevent frost buildup on the evaporator coil. When frost accumulates on the evaporator coil, it reduces the efficiency of the refrigeration system and can even cause damage to the compressor.

To prevent frost buildup, time-temperature defrost controls use a combination of time and temperature measurements. The control is set to activate at a certain time interval (usually several hours) and also monitors the temperature of the evaporator coil. When the temperature reaches a certain threshold (typically around 32°F), the control initiates a defrost cycle.

During the defrost cycle, the evaporator coil is heated to melt the accumulated frost. The length of the defrost cycle is determined by the control based on the amount of frost present and the time elapsed since the last defrost cycle. Once the defrost cycle is complete, the control returns to monitoring the temperature of the evaporator coil and resumes its time-based defrost cycle.

Overall, time-temperature defrost controls are an important part of refrigeration systems that help maintain efficiency and prevent damage to the compressor. By monitoring the temperature of the evaporator coil and initiating defrost cycles as needed, these controls help ensure optimal performance of refrigeration systems over time.

Learn more about defrost here : brainly.com/question/30163560

#SPJ11

Several factors that have contributed to the rapid standards development and low-cost products are - decentralized nature, open-source software movement , collaborative nature of the Internet and low barriers to entry in the Internet industry.

There are several factors that have contributed to the rapid standards development and low-cost products in the informal development process of the Internet.

Firstly, the decentralized nature of the Internet has allowed for a diverse range of developers to contribute to its development, resulting in a wide variety of innovative ideas and solutions. This has led to the emergence of numerous competing standards, which has fostered a culture of constant improvement and refinement.

Secondly, the open-source software movement has played a key role in the development of the Internet, enabling developers to freely access and modify code. This has allowed for rapid prototyping and testing, resulting in faster iteration times and lower costs.

Thirdly, the collaborative nature of the Internet has facilitated communication and knowledge sharing between developers, allowing for the exchange of ideas and best practices. This has led to the emergence of communities of practice that have been instrumental in driving standards development and innovation.

Finally, the low barriers to entry in the Internet industry have encouraged the participation of small and medium-sized enterprises (SMEs) and individual developers. This has resulted in a highly competitive environment, which has driven down costs and led to the emergence of disruptive technologies and business models.

Overall, the combination of these factors has contributed to the rapid standards development and low-cost products in the informal development process of the Internet.

Know more about the open-source software movement

https://brainly.com/question/29661963

#SPJ11

If the airplane attitude remains in a new position after the elevator control is pressed forward and released, the airplane displays neutral longitudinal dynamic stability.

This means that the airplane will continue to move in the same direction after the control input has been released, rather than returning to its previous attitude.

Positive longitudinal static stability would result in the airplane returning to its previous attitude, while neutral longitudinal static stability would result in the airplane remaining in its new attitude even without further control inputs. Based on the given terms and options, if the airplane attitude remains in a new position after the elevator control is pressed forward and released, the airplane displays:

Thus, positive longitudinal static stability.When the elevator control is pressed forward and released, the airplane's attitude changes. If the airplane remains in this new position, it demonstrates positive longitudinal static stability. This is because the airplane is able to maintain its new position without oscillating or returning to its original position, indicating a stable response to the input from the elevator control.

Learn more about dynamic stability here:brainly.com/question/30881066

#SPJ11

The load for house electric clothes dryers in a dwelling unit(s) shall be 5000 watts (volt-amps) or the nameplate rating, whichever is larger, for each dryer served.

This requirement can be found in section 220.54 of the National Electric Code. It is important to note that the nameplate rating of the dryer should always be taken into consideration when determining the load, as it may vary depending on the specific model and manufacturer.

The load for house electric clothes dryers in a dwelling unit(s) shall be 5,000 watts (volt-amps) or the nameplate rating, whichever is larger, for each dryer served. This is according to the National Electrical Code (NEC) section 220.54.

Learn more about NEC here:

brainly.com/question/28259564

#SPJ11

1. Forwarding the Telnet packets to the destination network, 2. Performing address translation between different network address types (e.g. MAC and IP addresses). 3. Enforcing security policies by inspecting and filtering the Telnet traffic.

Intermediary network devices, such as routers and firewalls, play a crucial role in facilitating communication between the host and the Telnet server on a remote network. These devices are responsible for forwarding the Telnet packets from the source host to the destination network, translating between different network address types to ensure proper routing, and enforcing security policies to protect against unauthorized access or malicious activity. For example, a firewall may inspect and filter Telnet traffic to prevent unauthorized access attempts or to detect and block malware or other threats. Without these intermediary network devices, communication between the host and Telnet server would be impossible or insecure.

learn more about network here:

https://brainly.com/question/14276789

#SPJ11

True. The relational database model is currently the most widely used database model in industry and academia.

It organizes data into tables consisting of rows and columns, with relationships between tables defined by keys. Relational databases provide a flexible and scalable way to store and manage structured data, and are used in a wide range of applications, from financial systems to social media platforms. While other database models, such as NoSQL and object-oriented databases, have gained popularity in recent years, the relational model remains the dominant choice for many organizations due to its well-established standards and widespread support.

Learn more about organizes data here:

https://brainly.com/question/28335869

#SPJ11

The statement "A TOF timer starts to accumulate time when the rung makes a true to false transition" is true because TOF (Timer Off-Delay) is a type of timer used in PLC (Programmable Logic Controller) programming.

It is designed to begin timing when the input condition transitions from true to false. When the rung condition is true, the timer's accumulated value remains at zero. Once the rung condition transitions to false, the timer starts accumulating time.

During the timing process, the timer's output remains active or true until the preset time has elapsed. After the preset time is reached, the timer's output deactivates or becomes false. This behavior allows the TOF timer to be used for various control applications, such as maintaining an output active for a specific duration after an input signal ceases.

In summary, a TOF timer begins to accumulate time when the rung makes a true-to-false transition, and its output remains active until the preset time has elapsed. This functionality is essential for precise control in many industrial automation processes.

You can learn more about the Programmable Logic Controller at: brainly.com/question/30904951

#SPJ11

Headers are an essential component of internet communication, allowing information to be transmitted between the client and the server. They contain metadata about the message, including information about the origin and destination of the message, the content type, and the date and time of the transmission.

Header fields, on the other hand, are specific pieces of information contained within the header. They provide additional details about the message, such as the content length, cache control, and the encoding of the message.

In essence, headers are the containers that hold the header fields, which provide specific details about the message being transmitted. Understanding the difference between the two is crucial for anyone working with internet communication, as it allows for effective communication between client and server.

In summary, headers are the overall structure that carries metadata in network communications, while header fields are the specific key-value pairs within the header that convey particular information.

Learn more about header fields here: brainly.com/question/13263813

#SPJ11

To calculate the average wait time for 1000 p/sec in a 256 element queue, we need to use the Little's Law formula, which states that the average number of elements in a queue is equal to the arrival rate multiplied by the average wait time.

Little's Law formula: Little's theorem is a mathematical queueing theorem by John Little which states that the long-term average number of customers in a stationary system is equal to the long-term average effective arrival rate multiplied by the average time that a customer spends in the system.

So, if we assume that the arrival rate is 1000 p/sec and the queue has 256 elements, we can rearrange the formula to solve for the average wait time:
Average wait time = (average number of elements in queue) / (arrival rate)
Average wait time = 256 / 1000
Average wait time = 0.256 seconds
Therefore, the average wait time for 1000 p/sec in a 256 element queue is 0.256 seconds.

Learn more about Little's Law  here

https://brainly.com/question/29538196

#SPJ11

Earth's orbit would not change if the Sun were turned into a black hole without changing its mass.

The mass of the black hole would be the same as the mass of the original Sun, so the gravitational force it exerts on Earth would be the same. The only difference would be that the distance from Earth to the black hole's event horizon would be smaller than the distance from Earth to the Sun's surface, due to the smaller size of the black hole. However, this difference would be negligible for Earth's orbit, which is much larger than the size of the event horizon. Therefore, option D ("Earth's orbit would not change") is the correct choice.

Learn more about mass here:

https://brainly.com/question/14869492

#SPJ11

After the servicing (pumping) of a septic tank, it is essential that the tank and lid be:
d. Replaced and secured for safety purposes

After the servicing (pumping) of a septic tank, it is essential that the tank and lid be replaced and secured for safety purposes. It is important to make sure that the tank and lid are properly fitted and secure to prevent any accidents or potential hazards. Cleaning the tank with a bleach or chlorine product or scrubbing it to remove hardened sludge may not be necessary but can be done as a precautionary measure. However, recolonizing the tank with a commercial biological product containing yeast may be beneficial in promoting the growth of healthy bacteria in the tank to aid in the decomposition of waste.It is not possible to measure the effects of human casualties. They can have grave consequences for employees and their families and friends as well.

This is why workplace safety and health measures are necessary. They are essential for the well-being of employers and employees alike. The feeling of assurance that one has, knowing that he will return safely from work, is more significant than anything else.

learn more about safety purposes here:

https://brainly.com/question/17309155

#SPJ11

TCP messages are called "segments." Segments are the units in which TCP messages are divided and transmitted over a network.

TCP messages are called segments. TCP (Transmission Control Protocol) is a widely used protocol for transmitting data over the internet.

Therefore, segments play a critical role in ensuring that data is transmitted efficiently and reliably over the internet.

Know more about the Transmission Control Protocol

https://brainly.com/question/14219758

#SPJ11

Outlet boxes intended to enclose flush devices shall have internal depth of not less than 1 1/4 inches according to section 314.24 of the National Electrical Code.

Ampacity is a word used to  expalin ampere capacity defined by National Electrical Codes.

Ampacity is defined as the maximum current, in amperes, that can flow in a conductor continuously under the conditions of use without exceeding the temperature rating of the conductor.

Therefore, in the National Electrical Code, the current carrying abilities of conductors are called the Ampacity.

formally certifying that all valid internal and external standards are complied with by your goods and services. The accreditation you hold attests to your marketability. To support that reputation, Intertek continues to hold a wide range of accolades and accreditations from throughout the world for our testing and certification services.

Learn more about National Electrical here

https://brainly.com/question/30391001

#SPJ11

All exception classes in Java inherit, either directly or indirectly, from class Throwable. Therefore, the correct answer is C. class Throwable.

Class Throwable is the superclass of all exceptions and errors in Java. All exception classes, including checked exceptions and unchecked exceptions, as well as errors, such as OutOfMemoryError and StackOverflowError, inherit from Throwable. In programming, an exception is an event that occurs during the execution of a program that disrupts the normal flow of instructions. Exceptions are often used to handle errors or other unexpected situations that may arise during program execution.

Learn more about exception classes here:

https://brainly.com/question/12944090

#SPJ11

Transport layer protocols are a critical part of the TCP/IP protocol suite, and they play a crucial role in ensuring that data is transmitted correctly and efficiently over a network.

The following are three statements that characterize transport layer protocols: The transport layer is responsible for providing reliable end-to-end data transmission between applications running on different devices over a network. Transport layer protocols define the format and rules for exchanging data between applications on different hosts. Transport layer protocols can provide flow control and congestion control mechanisms to prevent network congestion and ensure efficient use of network resources.  The transport layer is responsible for breaking up data into smaller packets and managing their transmission between applications running on different devices. It provides end-to-end reliability and error detection and correction, and it can also perform flow control and congestion control to prevent network congestion and ensure efficient use of network resources.

Learn more about transport layer protocols here:

https://brainly.com/question/28876666

#SPJ11

When an electrical pulse on one wire; is accidentally detected on another nearby wire this is known as a: D: Crosstalk

An electromagnetic pulse is defined as a short surge of electromagnetic energy. Its short duration tells us that it will be spread over a range of frequencies. Pulses are typically characterized by: The mode of energy transfer (radiated, electric, magnetic or conducted). The range or spectrum of frequencies present.

Copper cables are the most popular types of networking cable. They are typically made up of multiple pairs of copper wires inside plastic insulators. The sending device normally communicates binary data across these copper wires by changing the voltage that exists between two ranges.

The most popular forms of copper twisted pair cables that are used in networking are named: Cat5, Cat5e, and Cat6 cables.

Now, Crosstalk is defined as when an electrical pulse on one wire is accidentally detected on another wire. Thus, the receiving end isn't able to understand the data causing a network error.

Read more about Electric Pulse at: https://brainly.com/question/20410908

#SPJ1

Answer: Outdoor condensing coils are best cleaned with a combination of water and a specialized coil cleaner. When outdoor condensing coils become dirty, they can negatively impact the efficiency and effectiveness of your air conditioning or refrigeration system. This is because the coils are responsible for transferring heat from inside the building to the outside environment. When the coils become clogged with dirt, debris, and other contaminants, they can no longer efficiently transfer heat, leading to higher energy bills and reduced performance.

Explanation: Here's a step-by-step explanation for cleaning outdoor condensing coils:

1. Turn off the power to the outdoor unit to ensure safety during the cleaning process.

2. Remove any debris, such as leaves or dirt, from around the outdoor unit.

3. Use a soft brush or a vacuum with a brush attachment to gently clean the coils' fins, being careful not to bend or damage them.

4. Mix a mild detergent with water in a spray bottle, ensuring the solution is not too strong.

5. Spray the cleaning solution onto the coils, making sure to cover the entire surface area.

6. Allow the cleaning solution to sit on the coils for a few minutes, letting it break down dirt and grime.

7. Gently rinse the coils with a low-pressure water source, such as a garden hose, to remove the cleaning solution and any remaining dirt. Avoid using high pressure, as it can damage the fins.

8. Once the coils are clean, allow them to dry before turning the power back on and resuming operation of the outdoor unit.

Remember, maintaining clean outdoor condensing coils helps improve the efficiency and performance of your HVAC system.

Learn more about outdoor here: brainly.in/question/7230799

#SPJ11

The correct true statement is: d. For organizations that have limited company status, ownership and control are legally separate.

When a business operates as a limited company, it is considered as a legal entity with its own rights and liabilities. The company has its own legal personality, distinct from its owners or shareholders. This means that the ownership and control of the company are legally separated.

So, This statement is true. Limited companies, also known as corporations, are distinct legal entities separate from their owners or shareholders. This means that the ownership and control of the company are legally separated, and the company is liable for its own debts and obligations. Limited liability is one of the main benefits of operating as a limited company, as it helps protect the personal assets of the owners or shareholders from the debts and liabilities of the business.

To know more about statements here:

https://brainly.com/question/27839142

#SPJ1

A symmetric multiprocessor(SMP) runs on a computer system that has multiple identical processors, which are connected to a shared memory and can execute tasks simultaneously. It can also run on variety of systems, including servers, workstations, and high-performance computing clusters.

It is designed to distribute processing power across multiple processors, allowing for improved performance and scalability. SMP systems are often used in data-intensive applications such as scientific computing, data analysis, and virtualization.

In this architecture, each processor can access and run any task, ensuring a balanced workload and efficient performance.

Learn more on SMP here : brainly.in/question/55312157

#SPJ11

True.

Only individuals have been authorized to make original classification decisions can derivatively classify documents.

This means that if a document is already classified, individuals who are not authorized original classifiers cannot change the classification level or create a new classification for the document.

In the United States, the classification of national security information is governed by Executive Order 13526, which outlines the procedures and criteria for classifying and declassifying information.

The Executive Order establishes that only individuals who have been authorized to make original classification decisions can derivatively classify documents.

Derivative classification refers to the process of incorporating, paraphrasing, restating, or generating information that is already classified into a new document or material.

This means that if a document is already classified, individuals who are not authorized original classifiers cannot change the classification level or create a new classification for the document.

Instead, they must rely on the existing classification and use it as a basis for making derivative classification decisions.

Authorized derivative classifiers must receive training on the proper procedures for handling classified information, including marking, safeguarding, and disseminating the information.

They must also understand the classification guidance provided by the original classifier and apply it appropriately to the new material.

The proper handling of classified information is critical to protecting national security and preventing unauthorized disclosure.

Failure to follow established procedures and guidelines for classification and handling of classified information can result in serious consequences, including legal penalties and damage to national security.

It is essential that only authorized individuals are allowed to make derivative classification decisions and that they receive appropriate training and guidance to do so properly.

For similar questions on document

https://brainly.com/question/30563602

#SPJ11

Ceiling suspended (paddle) fans exceeding 35 pounds in weight, with or without accessories, shall be supported independently of the outlet box according to section 422.18.

According to the National Electrical Code (NEC) 422.18, ceiling suspended fans, also known as paddle fans, that weigh more than 35 pounds (15.88 kg) with or without accessories, shall be supported independently of the outlet box. This means that the fan must be secured to an appropriate support structure such as a hanger bar or a fan-rated ceiling box, in addition to being connected to the outlet box. This requirement is designed to ensure that the fan is securely mounted to prevent it from falling and causing injury or damage. It is important to note that the weight limit of 35 pounds includes the weight of the fan, any accessories such as light fixtures or remote controls, and any other equipment that is attached to the fan.

Learn more about pounds here-

https://brainly.com/question/29181271

#SPJ11

In Java, after an exception is handled, control resumes just after the throw point, which is the point in the code where the exception was thrown. This is known as the resumption model of exception handling.

When an exception is thrown in Java, the runtime system searches for an appropriate catch block that can handle the exception. Once a catch block is found, the exception is handled, and control resumes just after the throw point. This means that the program continues to execute from the point immediately following the statement that caused the exception to be thrown.

If there are multiple catch blocks, the one that matches the exception type is executed. Once the appropriate catch block has executed, any finally block associated with the catry-tch statement is executed before control resumes just after the throw point.

In the resumption model of exception handling, the program continues to execute from the point immediately following the throw point after an exception is handled. This is in contrast to the termination model of exception handling, where control terminates and the program stops executing after an exception is handled.

Learn more about Java here:

https://brainly.com/question/29897053

#SPJ11