Question 6
Hannah has $14,975 in an IRA. If she deposits $3,000 this year and then increases those deposits by $750 each following year, what rate does she need to earn to reach $1,000,000 in twenty-five years?

die

Step-by-step explanation:

When calculating a confidence interval, the level of confidence chosen determines the range of values within which the true population parameter is expected to fall.

A 95% confidence interval means that if we repeatedly sample from the population and construct confidence intervals, 95% of those intervals will contain the true population parameter.

On the other hand, a 99% confidence interval means that if we repeatedly sample from the population and construct confidence intervals, 99% of those intervals will contain the true population parameter.

The margin of error, which is the amount by which the interval may vary due to sampling error, is directly affected by the level of confidence chosen.

As the level of confidence increases, the margin of error also increases. Therefore, when a 99% confidence interval is calculated instead of a 95% confidence interval with n being the same, the margin of error will be wider.

This means that the range of values within which the true population parameter is expected to fall will be larger with a 99% confidence interval, making the interval less precise but more conservative.

It is important to note that choosing a higher level of confidence comes at the cost of a wider margin of error, which may not always be practical or necessary depending on the research question and context.

For similar question on confidence interval

https://brainly.com/question/30915515

#SPJ11

A graph of four points with integer coordinates that are each 3 units away from (2, 3) is shown in the image attached below.

In Mathematics and Geometry, the translation of a graph to the left simply means subtracting a digit from the value on the x-coordinate of the pre-image while the translation of a graph downward simply means subtracting a digit from the value on the y-coordinate (y-axis) of the pre-image.

In Mathematics and Geometry, a horizontal translation to the left is modeled by this mathematical equation g(x) = f(x + N).

Where:

In order to write an equation that models the four points with integer coordinates that are each 3 units away from (2, 3), we would have to apply a set of translation to f(x) by 3 units:

A (5, 3)

B (-1, 3)

C (2, 6)

D (2, 0)

Read more on coordinates here: https://brainly.com/question/27129207

#SPJ1

The solution is: number of cubes are 1120.

Here, we have,

Volume of wood block :

V = (n+5)(n+8)(n+14)

Number of cubes = Volume of wood block/ Volume of small cubes

Number of cubes, N = (n+5)(n+8)(n+14)    ....1)

Number of cubes with on sides painted is :

n = (n+5-2)(n+8-2)(n+14-2)

n = (n+3)(n+6)(n+12)

It is given that :

n = N/2

(n+3)(n+6)(n+12) = (n+5)(n+8)(n+14)/2

Solving above equation, we get :

n = 2

Putting value of n in equation 1, we get :

N = (2+5)(2+8)(2+14)

N = 7×10×16

N = 1120  cubes

Therefore, number of cubes are 1120.

Hence, this is the required solution.

To learn more on volume click :

brainly.com/question/1578538

#SPJ1

complete question:

A block of wood is in the shape of a rectangular prism with dimensions n+5 cm, n+8 cm, and n+14 cm. All faces of the block are painted, and then the block is cut into 1cm cubes using parallel cuts to each face. If exactly half of the cubes have no paint on them, find the total number of cubes.

Answer:

60

Step-by-step explanation:

5x4x3=60 therefor you would get 60 3 digit numbers

Therefore, 25.8 hours per employee each week is the mean number of hours worked.

The mean in mathematics is the average value among a group of numbers. It is calculated by adding up all of the set's numbers, then dividing the result by the total number of numbers in the set.

You may calculate the mean, for instance, if you have the set of numbers 2, 4, 6, and 8, by adding them all together and dividing by the total number of numbers:

(2 + 4 + 6 + 8) / 4 = 20 / 4 = 5

Consequently, 5 is the mean of these numbers.

In this instance, a store employed 5 workers for varying shifts. The list displays each individual's hours worked.

14 23 26 40 26

We add up all of these numbers and divide by the total number of numbers to determine the mean:

(14 + 23 + 26 + 40 + 26) / 5

= 129 / 5 mean of the numbers of hours worked by the employees = 25.8

To know more about mean visit:

brainly.com/question/31101410

#SPJ1

The volume of the prism is approximately 4519.16 cubic centimeters.

We have,

To find the volume of the prism, we need to multiply the area of the base by the height.

The area of a regular pentagon can be found using the formula:

[tex]$A = \frac{5}{4} s^2 \cot(\frac{\pi}{5})$[/tex]

where s is the length of the side of the Pentagon.

We are given that the area of the pentagon is 45 cm².

Solving for s:

[tex]$45 = \frac{5}{4} s^2 \cot(\frac{\pi}{5})$\\[/tex]

[tex]$s^2 = \frac{4}{5} \cdot \frac{45}{\cot(\frac{\pi}{5})}$\\[/tex]

[tex]$s^2 \approx 28.478$\\[/tex]

[tex]$s \approx 5.334$[/tex]

Now that we know the length of a side of the pentagon, we can find the area of the base of the prism:

[tex]$A_{base} = 5 \cdot \frac{1}{2} s \cdot h$[/tex]

[tex]$A_{base} = 5 \cdot \frac{1}{2} \cdot 5.334 \cdot 13$[/tex]

[tex]$A_{base} \approx 346.935$[/tex]

Finally, we can find the volume of the prism:

[tex]$V = A_{base} \cdot h$[/tex]

[tex]$V = 346.935 \cdot 13$[/tex]

[tex]$V \approx 4519.16$[/tex]

Therefore,

The volume of the prism is approximately 4519.16 cubic centimeters.

Learn more about Prism here:

https://brainly.com/question/12649592

#SPJ1

If Sally is 6ft tall there is a lamppost 15ft away from her and a building 45ft away from her, the building is 12ft tall.

We can use similar triangles to solve this problem. Let's assume that Sally's height is represented by the vertical line segment AB, the height of the building is represented by the vertical line segment CD, and the lamppost is represented by the point E.

We know that the distance between Sally and the lamppost is 15ft and the distance between Sally and the building is 45ft.

To find the height of the building, we need to find the length of the line segment CD. We can use the property of similar triangles that states that the ratio of corresponding sides in two similar triangles is equal.

Let's form two right triangles by drawing line segments AE and AC. We know that triangle ABE and triangle ABC are similar. We can set up a proportion as follows:

AB/AC = BE/BC

Substituting the known values, we get:

6/45 = x/15

Simplifying the equation, we get:

x = 2

Therefore, the height of the building is 2 times Sally's height, or:

2 * 6ft = 12ft

To learn more about height click on,

https://brainly.com/question/1698353

#SPJ4

As per the triangle, the length of the other, shorter leg is 3.46 units.

We know that a is twice the length of b, so we can write:

a = 2b

We also know that c is the square root of three times b, or:

c = √3b

Now, let's say we're given the length of the longer leg, a. We can use our equation a = 2b to solve for b:

a = 2b

b = a/2

So, we know that the shorter leg is half the length of the longer leg. For example, if a is 8, then b is 4.

To double-check our answer, we can use the equation for the hypotenuse:

c = √3b

c = √3(4)

c = 2√3 = 3.46

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

The number of packs of hot dogs that Aldo bought were 6 packs. The number of packs of buns were 5 packs and the number of hot dogs were 60 hot dogs.

Aldo bought the same number of hot dogs as buns. To find the least number of hot dogs and buns for which this is possible, we need to find the least common multiple (LCM) of the pack sizes (10 for hot dogs and 12 for buns).

Packs of hot dogs:

LCM / hot dogs per pack = 60 / 10 = 6 packs

Packs of buns:

LCM / buns per pack = 60 / 12 = 5 packs

Aldo bought 6 packs of hot dogs and 5 packs of buns. The total number of hot dogs he bought is:

6 packs x 10 hot dogs per pack = 60 hot dogs.

Find out more on packs at https://brainly.com/question/17400046

#SPJ1

The information quality of the survey is not reliable for understanding the current happiness level in the state.

The information quality for this survey is likely outdated and not

representative of the current state of Louisiana, particularly after the

devastating impact of Hurricane Katrina in 2005.

The survey was conducted before the hurricane, which significantly

affected the region, including the mental health and well-being of its

residents.

Thus, the survey's results may not accurately reflect the current level of

happiness or satisfaction among Louisiana residents.

Therefore, the information quality of the survey is not reliable for

understanding the current happiness level in the state.

for such more question on quality

https://brainly.com/question/26475885

#SPJ11

Answer:

13.5

Step-by-step explanation:

We can solve for x using the side splitter theorem, assuming that the two triangles' bases are parallel.

[tex]\dfrac{\text{segment of left side}}{\text{left side}} = \dfrac{\text{segment of right side}}{\text{right side}}[/tex]

↓ plugging in the lengths given in the diagram

[tex]\dfrac{4}{4 + 5} = \dfrac{6}{x}[/tex]

     [tex]\dfrac{4}{9} = \dfrac{6}{x}[/tex]

↓ cross-multiplying

[tex]4x = 9(6)[/tex]

[tex]4x = 54[/tex]

↓ dividing both sides by 4

[tex]x = 13.5[/tex]

We need a sample size of at least 753 to reduce the margin of error to 3.1% for a 95% confidence interval when the proportion is unknown.

To determine the sample size needed to reduce the margin of error to 3.1% for a 95% confidence interval when the proportion is unknown, we need to use the following formula:

n = (Z^2 * p * (1-p)) / E^2

Where:

n = sample size
Z = Z-score for the desired confidence level (95% confidence corresponds to a Z-score of 1.96)
p = proportion (since it's unknown, we use 0.5 to get the maximum sample size)
E = margin of error (in decimal form)

Plugging in the given values, we get:

n = (1.96^2 * 0.5 * (1-0.5)) / 0.031^2
n = 752.61

Therefore, we need a sample size of at least 753 to reduce the margin of error to 3.1% for a 95% confidence interval when the proportion is unknown.

To determine the sample size needed to reduce the margin of error to 3.1% for a 95% confidence interval when the proportion is unknown, you can use the formula for sample size calculation in a proportion estimation:

n = (Z^2 * p * (1-p)) / E^2

Here,
- n is the sample size
- Z is the Z-score corresponding to the desired confidence level (1.96 for a 95% confidence interval)
- p is the proportion, which is unknown (since we don't know the proportion, we use the most conservative estimate, p=0.5)
- E is the margin of error (0.031 for 3.1%)

Now, let's plug in the values:

n = (1.96^2 * 0.5 * (1-0.5)) / 0.031^2
n = (3.8416 * 0.5 * 0.5) / 0.000961
n = 1.0004 / 0.000961
n ≈ 1040.58

Since we cannot have a fraction of a participant, you should round up to the nearest whole number. Therefore, you would need a sample size of 1,041 to reduce the margin of error to 3.1% for a 95% confidence interval when the proportion is unknown.

Learn about confidence interval at: brainly.com/question/29680703

#SPJ11

A sample size of at least 754 is needed to reduce the margin of error to 3.1% for a 95% confidence interval when the population proportion is unknown.

The formula for calculating the sample size needed to estimate a population proportion with a specified margin of error at a certain level of confidence is:

[tex]$n = \frac{z^2 \cdot p \cdot (1-p)}{E^2}$[/tex]

where:

n is the sample size needed

z is the critical value of the standard normal distribution corresponding to the desired level of confidence (for a 95% confidence interval, z = 1.96)

p is the estimated proportion of the population (since the proportion is unknown, we will use the conservative estimate of 0.5 to obtain the maximum possible sample size)

E is the desired margin of error (in decimal form)

Substituting the given values, we get:

[tex]$n = \frac{1.96^2 \cdot 0.5 \cdot (1-0.5)}{0.031^2} \approx 753.68$[/tex]

Therefore, a sample size of at least 754 is needed to reduce the margin of error to 3.1% for a 95% confidence interval when the population proportion is unknown.

Learn more about  population proportion,

https://brainly.com/question/15087042

#SPJ4

The percentage increment of the bike is 86%

Percentage Increment is the percentage measurement of how much a certain figure changes or increases over time. It is the difference between the final value and the initial value, expressed in the form of a percentage.

How to determine this

When the price of a bike one year ago was Rs.268,000

i.e Initial value = Rs.268,000

The current price is Rs.290,900

i.e final value = Rs.290,900

To calculate the percentage increment

Percentage Increase = Final value - Initial value/Initial value * 100%

Percentage increase = Rs.290,900 - Rs.268,000/Rs.268,000 *100%

Percentage Increase = Rs.22,900/Rs.268,000 *100%

Percentage Increase = 2,290,000/268,000

Percentage Increase = 86%

Therefore, the percentage increment is 86%

Read more about Percentage Increase

https://brainly.com/question/28734810

SPJ1

The Phillips curve describes the relationship between the unemployment rate and the rate of change of wages. Option C is the correct option.

What is  Phillips curve?

The relationship between the rate of inflation and the unemployment rate is represented by the Phillips curve. The analysis of wage inflation and unemployment in the United Kingdom from 1861 to 1957 by A. W. H. Phillips, despite having forerunners, is a significant development in the field of macroeconomics. When unemployment was high, wages rose slowly; when unemployment was low, wages rose quickly, according to Phillips' research.

According to Phillips' hypothesis, as the unemployment rate declines, the labor market becomes more competitive and firms are forced to raise wages more quickly in order to recruit qualified workers. The pressure decreased as unemployment rates rose. The average relationship between wage behavior and unemployment over the course of the business cycle was represented by Phillips' "curve."

To learn more about curves, click on the below link:

https://brainly.com/question/29432628

#SPJ1

The circle graph would be the best graphical representation for the given scenario as it effectively shows the proportion of students who preferred each subject.

For the given scenario where the teacher gathered data from a random sample of 100 students in a particular school and wants to represent the preferred subject of the students, the most appropriate graphical representation would be a circle graph or a pie chart.

A circle graph is a circular chart that is divided into sectors, where each sector represents a portion of the whole.

In this case, each sector can represent the percentage or number of students who preferred a particular subject. The circle graph is suitable when we want to show the proportion of different categories or data that add up to a whole.

On the other hand, a stem-and-leaf plot, histogram, and box plot are usually used to represent quantitative data, such as measures of central tendency (mean, median, mode), range, and distribution.

They are not ideal for categorical data like the preferred subject of students.

Read more about graphical representation at

https://brainly.com/question/28350999

#SPJ1

The measure of angle JCA is 57°

When two lines intersect, the opposite (X) angles are equal. This means ;

123° = JCY

and JCA = YCK ( verically opposite angles)

The sum of angle at a point is 360. This means the addition of all the angles above is 360°.

Representing angle JCA by x , therefore,

x+x +123+123 = 360°( angle at a point)

2x + 246 = 360

2x = 360-246

2x = 114

divide both sides by 2

x = 114/2

x = 57°

therefore the measure of angle JCA is 57°

learn more about vertically opposite angles from

https://brainly.com/question/1673457

#SPJ1

The IQR is the best measure of variability, and it equals 3.

The appropriate measure of variability for the data in the box plot is the interquartile range (IQR), which is a measure of the spread of the middle 50% of the data.

From the box plot, we can see that the lower quartile (Q1) is located at 17, the upper quartile (Q3) is located at 20, and the median is located at 19. The IQR can be calculated as the difference between the upper and lower quartiles:

IQR = Q3 - Q1 = 20 - 17 = 3

Therefore, the IQR is 3 and it is the best measure of variability for the given data. The range, which is the difference between the maximum and minimum values (24 - 12 = 12), is not the best measure of variability in this case because it is affected by extreme values that may not be representative of the typical spread of the data.

To learn more about variability here:

https://brainly.com/question/31636027

#SPJ1

I choose City Bus as mode of transport since from function rule it is clear that the per mile cost for City Bus is lesser than any other transportation.

Option 1: Let the model for Taxi be f(x) = ax + b, where f(x) is total cost and x is number of miles.

From the table of Taxi we get, f(3) = 26.95; f(6) = 28.90; f(9) = 30.85 and f(12) = 32.80.

So, 3a + b = 26.95 and 6a + b = 28.90

So, (6a + b) - (3a + b) = 28.90 - 26.95

3a = 1.95

a = 1.95/3 = 0.65

Now, f(9) = 30.85

9*0.65 + b = 30.85

5.85 + b = 30.85

b = 30.85 - 5.85 = 25

So the model is, f(x) = 0.65x + 25

Option 2: Let the model for City Bus be f(x) = cx + d, where f(x) is total cost and x is number of miles.

From the table of Taxi we get, f(2) = 0.60; f(4) = 1.20; f(6) = 1.80 and f(8) = 2.40.

So, 2a + b = 0.60 and 4a + b = 1.20

(4a + b) - (2a + b) = 1.20 - 0.60

2a = 0.60

a = 0.60/2 = 0.30

Now, f(8) = 2.40

8*0.30 + b = 2.40

2.40 + b = 2.40

b = 2.40 - 2.40 = 0

So the function rule for City Bus is, f(x) = 0.3x.

Option 3: From the graph of Light Rail we can see that for any distance travelled total cost remains same that is 15.

So the function rule for Light Rail will be a constant function is, f(x) = 15

Option 4: Let the model for Motorized Scooter be f(x) = mx + n, where f(x) is total cost and x is number of miles.

From the graph we can see that, f(0) = 5, f(1) = 6, f(3) = 8 etc.

So, n = 5

and m + n = 6

m + 5 = 6

m = 6 - 5 = 1

Hence the function rule for Motorized Scooter is, f(x) = x + 5.

Hence I choose City Bus as mode of transportation as the per mile cost for that transportation mode is less than any other.

To know more about function rule here

https://brainly.com/question/30139621

#SPJ1

The Central Limit Theorem is an important tool that provides the information you will need to use sample means to make inferences about a population mean.

The Central Limit Theorem (CLT) is a fundamental theorem in statistics that states that if we take repeated random samples of size n from any population with a finite mean and variance, then the distribution of sample means approaches a normal distribution as the sample size increases, regardless of the shape of the original population distribution.

This means that if we take a large enough sample size from a population, the distribution of the sample means will be approximately normal, even if the population distribution is not normal. This is important because the normal distribution is well understood and has many useful properties that make it easier to work with in statistical analyses.

Learn more about Central Limit Theorem here

brainly.com/question/18403552

#SPJ4

To begin solving this problem, we need to determine the dimensions of the rectangular region that the farmer will fence in. Let's say the length of thr uses, is given by the equation:
e rectangle is L and the width is W. The perimeter of the rectangle, which will be the length of fencing the farme
2L + W = 350

Solving for W, we get:

W = 350 - 2L

Next, we need to divide the rectangular region into three smaller rectangles by placing two parallel fences. Let's say the two fences are placed along the length of the rectangle, dividing it into three sections with widths of x, y, and z. Therefore, we have:

L = x + y + z

Now, we can determine the area of the entire fenced-in region by summing the areas of the three smaller rectangles. The area of a rectangle is given by the equation:

Area = Length x Width

Therefore, the total area of the fenced-in region is:

Area = (xW) + (yW) + (zW)

Substituting W = 350 - 2L and L = x + y + z, we get:

Area = (x(350-2(x+y+z))) + (y(350-2(x+y+z))) + (z(350-2(x+y+z)))

Simplifying this equation, we get:

Area = 350(x+y+z) - 2(x^2 + y^2 + z^2)

To maximize the area, we need to take the derivative of this equation with respect to one of the variables (x, y, or z), set it equal to zero, and solve for the variable. This process is too complicated to do by hand, so we will use a calculator or computer program to find the maximum area.

After finding the maximum area, we can determine the dimensions of the region that give us this maximum area. We do this by using the equations we derived earlier:

W = 350 - 2L

L = x + y + z

With the maximum area and these equations, we can solve for the dimensions of the region that give us the maximum area.

In summary, the farmer should fence in a rectangular region with dimensions that maximize the total area of three smaller rectangles created by placing two parallel fences. The maximum area can be found by taking the derivative of the area equation and setting it equal to zero. The dimensions of the region that give us the maximum area can be found by using the equations we derived earlier.

learn more about dimensions here : brainly.com/question/28688567

#SPJ11

The second time that d = 4 is approximately 2.275 seconds after the pendulum starts swinging forward from its vertical position at rest.

What is the sinusoidal function?

A sinusoidal function is a mathematical function that describes a repetitive oscillation that resembles a sine or cosine wave. It can be expressed in the general form:

f(x) = A sin (Bx + C) + D

We can use the general form of a sinusoidal function to model the horizontal distance "d" of the tip of the pendulum from its vertical position at rest:

d = A sin(ωt + φ) + C

where:

A = amplitude (maximum displacement) = 7.5 inches

ω = angular frequency = (2π)/T, where T is the period = 3.1 seconds

φ = phase shift (initial horizontal displacement) = 0 (since the pendulum is at rest at t=0)

C = vertical displacement = 0 (since the pendulum is at rest at its vertical position)

Plugging in the given values, we get:

d = 7.5 sin((2π/3.1)t)

Now we can use this equation to answer the given questions:

Determine the value of d when t = 3.1 s:

We simply plug in t = 3.1 into the equation:

d = 7.5 sin((2π/3.1)(3.1))

d = 7.5 sin(2π)

d = 0 inches

Therefore, when t = 3.1 seconds, the horizontal distance of the tip of the pendulum from its vertical position is 0 inches.

Approximate the value of t when d = 4 for the second time:

To find when d = 4 for the second time, we need to find the two values of t for which the sinusoidal function equals 4. We can use the fact that the sine function repeats itself every 2π radians to solve this problem.

First, we find the period of the sinusoidal function:

T = 2π/ω = 2π/(2π/3.1) = 3.1 seconds

Next, we find the time it takes for the function to complete half a cycle, or π radians:

t1 = (π/ω) + kT, where k is an integer

t1 = (π/(2π/3.1)) + k(3.1)

t1 = (3.1/2) + 3.1k

We want to find the second time that d = 4, so we need to find the smallest integer value of k for which t2 > t1, where t2 is the time when d = 4 for the second time.

t2 = (3π/ω) + kT

t2 = (3π/(2π/3.1)) + k(3.1)

t2 = (9.3/2) + 3.1k

We want to find the smallest integer value of k such that t2 > t1 and d = 4:

7.5 sin((2π/3.1)t1) = 4

7.5 sin((2π/3.1)t2) = 4

calculating

t1 ≈ 0.604 s

t2 ≈ 2.275 s

Therefore, the second time that d = 4 is approximately 2.275 seconds after the pendulum starts swinging forward from its vertical position at rest.

To learn more about the sinusoidal function visit:

https://brainly.com/question/29529184

#SPJ1

So, Lena sent 24 messages, Alan sent 32 messages, and Bill sent 48 messages.

Let's denote the number of messages Lena, Alan, and Bill sent as L, A, and B, respectively. We are given the following information:

L + A + B = 104 (Total messages)

L = A - 8 (Lena sent 8 fewer messages than Alan)

B = 2L (Bill sent 2 times as many messages as Lena)

Now, we'll use the second equation to express A in terms of L:

A = L + 8

Next, substitute the expressions for A and B from equations 2 and 3 into equation 1:

L + (L + 8) + 2L = 104

Combine like terms:

4L + 8 = 104

Subtract 8 from both sides:

4L = 96

Divide by 4:

L = 24

Now that we have the number of messages Lena sent, we can find the number of messages Alan and Bill sent:

A = L + 8 = 24 + 8 = 32

B = 2L = 2 * 24 = 48

Answer:

N/A

Step-by-step explanation:

If you're looking for a significance or interpretation of the number 2,000,005,679,876, it's just a number. Unless utilized in a certain mathematical, financial, or another applicable context, it has no meaning or relevance. It is a big number with thirteen digits that can signify a quantity, amount, or value in a variety of scenarios depending on the context.

Step-by-step explanation:

okay as we know a circle is a quarter 360° in total therefore all you have to do is say 360° multiplied by 165

Answer:

Therefore, the answer is: (2x-1)(x+2)(3x-1)=6x^3+7x^2-9x+2

Step-by-step explanation:

To prove that (2x-1)(x+2)(3x-1)=6x^3+7x^2-9x+2 for all values of x, we can simply expand the left-hand side of the equation and simplify it to match the right-hand side.

Expanding the left-hand side using the distributive property, we get:

(2x-1)(x+2)(3x-1) = (2x^2+3x-2)(3x-1)

= 6x^3 + 7x^2 - 9x + 2

This matches the right-hand side of the equation, so we have proven that (2x-1)(x+2)(3x-1)=6x^3+7x^2-9x+2 for all values of x.

To calculate the length of the curve defined by r(t) = 〈2 cos(t), 2 sin(t)〉 with the domain -π/2 ≤ t ≤ π/2, we need to find the arc length using the following formula:

Arc length = ∫(from a to b) ||r'(t)|| dt

First, let's find the derivative r'(t) of the given vector function r(t):

r(t) = 〈2 cos(t), 2 sin(t)〉
r'(t) = 〈-2 sin(t), 2 cos(t)〉

Next, find the magnitude ||r'(t)|| of the derivative vector:

||r'(t)|| = √((-2 sin(t))^2 + (2 cos(t))^2)
||r'(t)|| = √(4 sin^2(t) + 4 cos^2(t))

Factor out 4:

||r'(t)|| = √(4(sin^2(t) + cos^2(t)))

Since sin^2(t) + cos^2(t) = 1:

||r'(t)|| = √(4) = 2

Now, we can find the arc length by integrating ||r'(t)|| over the given domain:

Arc length = ∫(from -π/2 to π/2) 2 dt

To integrate, simply multiply the constant by the difference in t:

Arc length = 2(π/2 - (-π/2)) = 2(π) = 2π

So, the length of the curve is 2π.

Lear more about length of the curve from : brainly.com/question/31376454

#SPJ11

Answer:

Step-by-step:

1.The probability of picking a brown ball can be calculated as:

Probability of picking a brown ball = Number of brown balls / Total number of balls

Number of brown balls = 25

Total number of balls = 13 + 25 = 38

Probability of picking a brown ball = 25/38

Probability of picking a brown ball is approximately 0.658 or 65.8%

Therefore, the probability of Jaide picking a brown ball from the jar is approximately 0.658 or 65.8%.

2.There are four kings in a pack of 52 cards (one king for each suit). Therefore, the probability of drawing a king from a pack of 52 cards can be calculated as:

Probability of drawing a king = Number of kings / Total number of cards

Number of kings = 4

Total number of cards = 52

Probability of drawing a king = 4/52

Probability of drawing a king is approximately 0.077 or 7.7%

Therefore, the probability of getting a king when drawing a card at random from a pack of 52 cards is approximately 0.077 or 7.7%.

The values of the positive intergers a and b is 2 and 3 respectively and the value of 2a+3b is 13.

An algebraic expression are the expression which consist the variables, coefficients of variables and constants. In the given problem, a and b are positive integers.  The given expression in the problem is: ^2b^3=108.

Let us the hit and trial method to make both the equation equal. For a=1 and b= 1 the expression will be equal to 1. For a =2 and b=3,

(2)^2(3)^3 = 108

(4)(27) = 108

108 = 108

Here, left hand side of the expression is equal to the right hand side of the expression for a =2 and b=3. Thus the value of a and b are,

a = 2

b = 3

The value of the expression we have to find is, 2a+3b. Put the values of a and b in the above expression, we get,

2a+3b = 2^(2)+3^(3)

2a+3b = 4+9

2a+3b = 13

Read more about Integer

brainly.com/question/929808

#SPJ1

Heidi's rate of elimination is also decreasing over time, but at a slower rate than Clara's which decreases exponentially over time

Given data ,

Let the exponential equation be represented as A

Now , the value of A is

f(t) = 300(0.946)^t

For Clara, we can calculate the rate of elimination by finding the difference in the amount of medicine present between two consecutive time points, and dividing by the time elapsed:

From t=1 to t=2: f(2) - f(1) = 223.73 - 236.5 = -12.77 mg

Rate of elimination = -12.77 mg / (2-1) hours = -12.77 mg/hour

From t=2 to t=3: f(3) - f(2) = 211.65 - 223.73 = -12.08 mg

Rate of elimination = -12.08 mg / (3-2) hours = -12.08 mg/hour

From t=3 to t=4: f(4) - f(3) = 200.22 - 211.65 = -11.43 mg

Rate of elimination = -11.43 mg / (4-3) hours = -11.43 mg/hour

From t=4 to t=5: f(5) - f(4) = 189.41 - 200.22 = -10.81 mg

Rate of elimination = -10.81 mg / (5-4) hours = -10.81 mg/hour

Hence , this expression tells us that the rate of elimination for Heidi is proportional to the amount of medicine in her body at any given time, and decreases exponentially over time as the amount of medicine decreases

To learn more about exponential growth factor click :

https://brainly.com/question/13674608

#SPJ1