Question 4 Marks: 1 An operating free chlorine residual of ______ is usually required in practice.Choose one answer. a. 0.2 ppm b. 1.0 to 3.0 mg/l c. 0.4 to 0.8 mg/l d. 2 to 5 ppm

The equilibrium constant expression for the reaction 2 BrF5(g) Br2(g) + 5 F2(g) is  Kc = [BrF5]2/[Br2][F2]5. The correct answer is option D.

This expression shows that the equilibrium constant is equal to the concentration of BrF5 raised to the power of 2, divided by the concentration of Br2 multiplied by the concentration of F2 raised to the power of 5.

The equilibrium constant is a measure of the extent to which the reaction proceeds towards the products at equilibrium, and it is a function of temperature. The larger the equilibrium constant, the more products are present at equilibrium. In this reaction, the concentration of the reactant BrF5 is squared, which means that it has a greater impact on the equilibrium constant than the concentrations of the products Br2 and F2.

Therefore, a decrease in the concentration of BrF5 will cause a decrease in the value of the equilibrium constant, and a shift towards the reactants. Conversely, an increase in the concentration of BrF5 will cause an increase in the value of the equilibrium constant, and a shift towards the products.

Therefore, option  D is correct.

For more such questions on  equilibrium constant, click on:

https://brainly.com/question/19340344

#SPJ11

The isotopic mass of an element is the mass of a particular isotope of that element relative to the mass of a carbon-12 atom, which is defined as having a mass of exactly 12 atomic mass units (amu).

The atomic mass of sodium is calculated by taking the weighted average of the isotopic masses of its naturally occurring isotopes, with the relative abundance of each isotope taken into account. However, in this case, it is stated that the only naturally occurring isotope of sodium is 23Na, which means that the isotopic mass of sodium is simply the mass of a single 23Na atom.

The atomic mass of 23Na can be calculated by adding the number of protons and neutrons in its nucleus. Sodium has 11 protons, which means that all sodium atoms have an atomic number of 11. 23Na has 12 neutrons, which gives it an isotopic mass of 23 amu. Therefore, the isotopic mass of sodium is 23 amu.

It is important to note that the isotopic mass of an element may vary based on the specific isotope being considered, as different isotopes have different numbers of neutrons in their nuclei. However, in the case of sodium, there is only one naturally occurring isotope, which makes determining its isotopic mass a straightforward process.

You can learn more about isotopes at: brainly.com/question/21536220

#SPJ11

A and C are the correct statements that describe trends in atomic radii for ions.

A cation, which is a positively charged ion, is smaller than its neutral atom because the loss of electrons reduces the electron-electron repulsion, making the remaining electrons closer to the nucleus. On the other hand, an anion, which is a negatively charged ion, is larger than its neutral atom because the increase in electrons leads to greater electron-electron repulsion, which pushes the electrons further away from the nucleus.

Statement B is incorrect because as the number of protons increases, the ion size decreases in an isoelectronic series, as there is a greater positive charge holding the same number of electrons closer to the nucleus.

Find out more about atomic radi

brainly.com/question/30799882

#SPJ11

Silicon (Si), a member of the semiconductor family and the second most prevalent element in the rocky crust of the earth, has 14 protons and 14 electrons.

The chemical element silicon has the chemical symbol Si and atomic number 14. It is a nonmetal having semiconducting characteristics that belong to group 14 of the periodic table. Following oxygen in terms of abundance, silicon makes up around 27% of the bulk of the earth's crust. It may be extracted from sand or quartz and is present in a wide range of minerals. Silicon is employed as a semiconductor in electrical components including transistors, diodes, and solar cells, among other crucial technological uses. Due to its special qualities, it is a fundamental component of contemporary electronics and is frequently employed in the production of computer chips and other electronic parts.

learn more about Silicon here:

https://brainly.com/question/14505564

#SPJ11

B) False. The average rate of a reaction is the change in the concentration of a reactant or product over a certain time interval, usually calculated by dividing the change in concentration by the time interval.

It is not the rate of reaction at any given time, but rather an average of the rate of reaction over a certain period of time.

The rate of reaction at any given time is called the instantaneous rate of reaction, and it is calculated by finding the slope of the tangent line to the concentration-time curve at a particular point in time. The instantaneous rate of reaction can change over time as the concentration of reactants and products change, whereas the average rate of reaction remains constant over the time interval for which it is calculated.

Suppose a reaction occurs according to the equation A → B. The rate of this reaction can be expressed as:

Rate = - d[A]/dt = d[B]/dt

where d[A]/dt is the rate of disappearance of A and d[B]/dt is the rate of appearance of B. The negative sign in the equation indicates that the rate of disappearance of A is equal in magnitude but opposite in sign to the rate of appearance of B.

The instantaneous rate of the reaction at a particular time t can be calculated by finding the slope of the tangent line to the concentration-time curve of either A or B at that time. This tangent line represents the rate of reaction at that specific moment in time.

On the other hand, the average rate of the reaction over a certain time interval (t1 to t2) can be calculated by taking the difference in the concentration of A or B at time t2 and time t1, and dividing it by the time interval (t2 - t1):

Average rate = (Δ[A]/Δt)avg = - (Δ[B]/Δt)avg

where (Δ[A]/Δt)avg is the average rate of disappearance of A and (Δ[B]/Δt)avg is the average rate of appearance of B over the time interval.

Therefore, the average rate of a reaction is not the rate of reaction at any given time, but rather an average of the rate of reaction over a certain period of time. The instantaneous rate of reaction, on the other hand, is the rate of reaction at a specific moment in time.

To know more about  time interval

brainly.com/question/14512776

#SPJ11

A magnesium ion, Mg2+, has correct answer is option E) 12 protons and 14 electrons.

The correct answer is option E) 12 protons and 14 electrons. This is because the atomic number of magnesium, which is the number of protons in its nucleus, is 12. When it loses two electrons to become an ion, it still has 12 protons but now only 10 electrons. Therefore, the charge on the ion is 2+ (written as Mg2+). Options A, B, C, and D have incorrect numbers of protons and electrons for a magnesium ion.

Mg2+, an ion of magnesium, contains 12 protons and 14 electrons. This is so because magnesium has 12 protons, or its atomic number, in its nucleus. It still has 12 protons but only 10 electrons when it loses two electrons to become an ion. As a result, the ion has a 2+ charge, represented by the symbol Mg2+. For a magnesium ion, the protons and electrons in Options A, B, C, and D are in the wrong proportions.

To know more about magnesium ion click here:

https://brainly.com/question/1698012

#SPJ11

The first major recorded episode of air pollution that produced human casualties occurred in the Meuse River Valley, Belgium.

In 1930, a combination of industrial emissions and weather conditions led to a thick smog settling over the valley for several days, resulting in the deaths of at least 60 people and causing illness in thousands more. This event brought attention to the dangers of air pollution and led to the development of air quality regulations and monitoring systems.

the first major recorded episode of air pollution that produced human casualties occurred in Donora, Pennsylvania in 1948. Severe industrial air pollution created a deadly smog that asphyxiated 20 people and made 7,000 more sick.

Find out more about Meuse River Valley

at brainly.com/question/31556531

#SPJ11

The answer to the question is D. Appearance was of primary importance because of which Mortise-and-tenon joints were used in most 18th century timber framing

Mortise-and-tenon joints were commonly used in 18th century timber framing because they provided a strong and durable joint, but they also allowed for a clean and aesthetically pleasing appearance. While metal fasteners were scarce at the time, it was not the only reason for the use of this joint. The use of mortise-and-tenon joints was also a reflection of the craftsmanship and skill of the builders who wanted to create a lasting and visually appealing structure. Additionally, the tools needed to make mortise-and-tenon joints were readily available and could easily be produced with the primitive tools of the time.

To learn more about metal click here https://brainly.com/question/29404080

#SPJ11

To calculate the number of carbon atoms in 15 lbs of sugar, we need to first determine the molar mass of C₁₂H₂₂O₁₁ and the number of moles of C₁₂H₂₂O₁₁ in 15 lbs of the compound.

To determine the number of carbon atoms in 15 lbs of sugar (C₁₂H₂₂O₁₁), we need to first calculate the molar mass of C₁₂H₂₂O₁₁:

Molar mass of C₁₂H₂₂O₁₁ = (12 × 12.01 g/mol) + (22 × 1.01 g/mol) + (11 × 16.00 g/mol) = 342.3 g/mol

Next, we need to calculate the number of moles of C₁₂H₂₂O₁₁ in 15 lbs:

1 lb = 0.4536 kg

15 lbs = 6.804 kg

Number of moles of C₁₂H₂₂O₁₁ = (6.804 kg) / (342.3 g/mol) = 19.88 mol

Finally, we can calculate the number of carbon atoms:

Number of carbon atoms = (12 atoms/mol) × (19.88 mol) = 238.5 ≈ 2.4 × 10^2 carbon atoms

Therefore, the answer is option D) 2.6 x 10^22 C atoms.

Learn more about carbon atoms here:

https://brainly.com/question/21850455

Impurities in combustible hydrocarbons (coal and oil) combine with oxygen to produce carbon monoxide when burned. So, the correct answer is D. carbon monoxide

Impurities present in combustible hydrocarbons, such as coal and oil, combine with oxygen during combustion to produce carbon monoxide, a toxic gas that can be harmful to human health and the environment. Other byproducts of combustion include nitrogen oxides, sulfur dioxide, and nitrogen dioxide, which can also have negative impacts on air quality and human health. Hence The correct answer is d. carbon monoxide.

Carbon monoxide is a poisonous gas that can be hazardous to both human health and the environment. It is produced during combustion when impurities present in combustible hydrocarbons, such as coal and oil, mix with oxygen. Other combustion byproducts that may be harmful to air quality and human health include nitrogen oxides, sulphur dioxide, and nitrogen dioxide.

To know more about hydrocarbons click here:

https://brainly.com/question/31477799

#SPJ11

The correct volume of the solid where the inner cylinder is hollow is:508.2in³

The space occupied within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

a cylinder is a three-dimensional solid that holds two parallel bases joined by a curved surface, at a fixed distance. These bases are normally circular in shape (like a circle) and the center of the two bases are joined by a line segment, which is called the axis. The perpendicular distance between the bases is the height, “h” and the distance from the axis to the outer surface is the radius “r” of the cylinder.

according to question,

If we calculate the volume of the outer cylinder, we get:

Volume = π × [tex]r^{2}[/tex] × h = 3.14 × 5^2 × 10 = 785.4 [tex]in^2[/tex]

If we calculate the volume of the inner cylinder, we get:

Volume = π × [tex]r^{2}[/tex] × h = 3.14 × 3^2 × 10 = 282.6 [tex]in^{2}[/tex]

However, the volume of the solid where the inner cylinder is hollow is not the difference between these two volumes. Instead, we need to subtract the volume of the hollow part (the space between the two cylinders), which is the volume of a cylinder with a radius of 3 inches and a height of 10 inches:

Volume = π × r^2 × h = 3.14 × 3^2 × 10 = 282.6 in^3

Therefore, the correct volume of the solid where the inner cylinder is hollow is:

Volume = 785.4 - 282.6 = 502.8 in^3

So, the student's mistake was not taking into account the thickness of the inner cylinder and subtracting the wrong volume.

To know more about volume visit:

https://brainly.com/question/1578538

#SPJ1

A static member function may be called without creating an instance of its class.

A static member function may be called even before any instances of its class are defined. This is because static members are associated with the class itself, rather than individual instances, allowing the function to be accessed without creating an instance of the class.When a data member is declared as static , only one copy of the data is maintained for all objects of the class. Static data members are not part of objects of a given class type.

to know more about data member  please viist :-

https://brainly.com/question/15694646

#SPJ11

A static member function may be called without creating an instance of its class.

A static member function is a member function of a class that is associated with the class rather than an instance of the class. This means that a static member function can be called without creating any instances of the class.

It is defined using the static keyword in the class declaration and can access only static data members of the class. Since it is not tied to any particular instance of the class, it can be called using the class name, rather than an object of the class.

to know more about data members please viist :-

https://brainly.com/question/28315471

#SPJ4

The model that represents the arrangement of molecules in a solid substance is the "regularly packed" or "fixed position" model. In this model, the molecules are arranged in a specific.

A molecule is a group of two or more atoms that are chemically bonded together. Molecules can be composed of atoms of the same element or of different elements. The atoms within a molecule are held together by covalent bonds, which involve the sharing of electrons between atoms. Molecules can vary greatly in size and complexity, ranging from simple diatomic molecules like oxygen (O2) or hydrogen (H2), to more complex molecules like glucose (C6H12O6) or DNA. The properties of a molecule depend on the types of atoms present, the arrangement of those atoms within the molecule, and the types of chemical bonds holding the atoms together.

An atom is the basic unit of matter, composed of a nucleus made up of protons and neutrons, surrounded by electrons that orbit the nucleus. The number of protons in the nucleus determines the element to which the atom belongs. Atoms of the same element have the same number of protons, but may have different numbers of neutrons, resulting in isotopes of that element.

To know more about atoms visit :

https://brainly.com/question/30898688

#SPJ1

While certain aquaporins can transport glycerol because of its bigger size and capacity to form hydrogen bonds, others cannot transport H+ because of its tiny size and charge.

Specialised water channels called aquaporins enable the quick and precise movement of water molecules across cellular membranes. They are very selective and do not let the passage of ions, including H+, due to their small pore sizes. H+ ions cannot pass through an aquaporin channel because they have a positive charge and are smaller than even the smallest width of the channel. Contrarily, some aquaporins are capable of selectively transporting glycerol, a bigger molecule that can establish hydrogen bonds with the aquaporin residues lining the pore.

learn more about glycerol here:

https://brainly.com/question/31382305

#SPJ11

Swimming pool water that is brownish-black in color may be due to iron (Fe) contamination. option (d)

Iron can enter swimming pool water through a variety of sources, including source water, metal pipes, or iron-containing pool equipment. When the pH level of the pool water is too low, the iron can react with the chlorine to form insoluble iron compounds, resulting in a brownish-black color.

This can be a cosmetic issue, as well as a potential health hazard. To treat the problem, the pH level of the pool water can be raised to prevent the formation of insoluble iron compounds, and a sequestrant can be added to help keep the iron in the solution.

Learn more about the potential health hazard

https://brainly.com/question/6856980

#SPJ4

There are a total of 15 atoms in the chemical formula of ammonium sulfate, (NH4)2SO4. So, the correct answer is C) 15.

To find the total number of atoms in the chemical formula of ammonium sulfate, (NH₄)₂SO₄, we need to count each type of atom present in the formula.

1. There are 2 nitrogen (N) atoms in the two ammonium ions (NH₄).
2. There are 8 hydrogen (H) atoms in the two ammonium ions (2 x 4 = 8).
3. There is 1 sulfur (S) atom in the sulfate ion (SO₄).
4. There are 4 oxygen (O) atoms in the sulfate ion (SO₄).

Now, let's add up the total number of atoms: 2 (N) + 8 (H) + 1 (S) + 4 (O) = 15 atoms

So, C is the correct option.

You can learn more about ammonium sulfate at: brainly.com/question/10834028

#SPJ11

The correct formula for iron(II) phosphate is Fe2PO4. The correct answer is option A.

This compound consists of two iron(II) ions (Fe2+) and one phosphate ion (PO43-). Iron(II) phosphate is an inorganic compound commonly used in the manufacturing of fertilizers, animal feed, and in the production of iron alloys.

It is important to note that iron(II) and iron(III) are two different oxidation states of iron, and they form different compounds with the same anion. Iron(III) phosphate is represented by the formula FePO4 or FePO4·2H2O, while iron(II) phosphate has the formula Fe2PO4.

It is also important to properly name and write chemical formulas for compounds to accurately represent their composition. In the case of iron(II) phosphate, the Roman numeral (II) is used to indicate the oxidation state of iron, while the subscript numbers represent the number of atoms of each element in the compound.

Therefore, option A is correct.

For more such questions on iron(II) phosphate, click on:

https://brainly.com/question/15721987

#SPJ11

An amino acid takes on the zwitterion form when it is in a neutral solution, particularly at its isoelectric point.

An amino acid takes on the zwitterion form when it is in a neutral solution, typically at its isoelectric point (pI). A zwitterion is a molecule with both positive and negative charges, but with a net charge of zero. In an amino acid, the carboxyl group [tex](-COOH)[/tex] donates a proton [tex](H^+)[/tex] to the amino group [tex](-NH_2)[/tex] , resulting in a negatively charged carboxylate ion [tex](-COO-)[/tex]  and a positively charged ammonium ion [tex](-NH_3^+)[/tex].

The isoelectric point (pI) is the pH at which an amino acid exists predominantly as a zwitterion. At this pH, the overall charge on the amino acid is zero, and it will not migrate in an electric field. The pI values of amino acids vary, depending on the side chain groups present, which can affect the overall charge of the molecule.

For more such questions on amino acid, click on:

https://brainly.com/question/30265108

#SPJ11

Based on (TSI) medium description provided (yellow slant with black precipitate in butt), the following can be concluded: B. The pH of the agar decreased following incubation. C. The bacterium is able to ferment glucose. D. The bacterium is unable to ferment lactose and/or sucrose. E. Hydrogen sulfide (H2₂) was produced.

For TSI medium result (yellow slant with black precipitate in the butt), the correct statements are:

B. The pH of the agar decreased following incubation → The yellow slant with acid production indicates that the bacterium is able to ferment glucose, which results in the production of acidic byproducts. This leads to a decrease in pH of the agar in the slant portion of the medium.

C. The bacterium is able to ferment glucose → The yellow color in the slant portion of the TSI medium indicates that the bacterium is able to ferment glucose, producing acidic byproducts. This is confirmed by the statement that the pH of the agar decreased following incubation.

D. The bacterium is unable to ferment lactose and/or sucrose → The absence of any color change (remaining yellow) in the butt portion of the TSI medium indicates that the bacterium is unable to ferment lactose and/or sucrose, as there is no production of acidic byproducts.

E. Hydrogen sulfide (H2₂) was produced → The black precipitate in the butt portion of the TSI medium indicates the production of hydrogen sulfide (H2S) gas by the bacterium. This is confirmed by the statement that there is a black precipitate in the butt portion of the medium.

Learn more about  Triple Sugar Iron (TSI) here:

https://brainly.com/question/17014912

#SPJ11

Bond dissociation energy is required to break covalent bonds between atoms. Bond dissociation energy (BDE) is the energy required to break a covalent bond between two atoms in a molecule.

Here are some additional points about bond dissociation energy:

This energy is necessary to overcome the attractive forces between the positively charged nuclei and negatively charged electrons. BDE is typically measured in units of kilojoules per mole (kJ/mol).

Learn More About Atoms

https://brainly.com/question/441927

#SPJ11

The dehydration of the coupled Na+ ions in the bacterial two-Na+/one-leucine symporter, which prevents other ions, especially K+, from binding, is their primary differentiating characteristic.

The loss of water molecules from the hydration shells of Na+ ions causes them to become dehydrated when they are bound to the symporter. Because of this, Na+ ions can attach to the symporter more firmly than other ions, such K+. As K+ ions need hydration to stabilise their charges, the dehydration of the Na+ ions also produces an energetically unfavourable environment for their binding. As a result, the transport of Na+ ions is specifically enhanced and K+ ions are unable to compete with Na+ ions for binding to the symporter.

The two-Na+/one-leucine symporter, which is essential for the uptake of nutrients by bacteria, depends on the selective binding of Na+ ions over other ions.

learn more about bacteria here:

https://brainly.com/question/8008968

#SPJ11

Option C is Correct. 146 g  Hydrogen chloride gas can be prepared. Chemistry's use of relationships between products and/or reactants in a specific chemical process to obtain desired quantitative data is known as stoichiometry.

To solve this problem, we need to use stoichiometry and convert the given amounts of H2SO4 and NaCl to the amount of HCl that can be produced.
First, let's write the balanced chemical equation:
2NaCl(s) + H₂SO₄(aq) ⇒ 2HCl(g) + Na₂SO₄(s)
According to the equation, 2 moles of NaCl reacts with 1 mole of H2SO4 to produce 2 moles of HCl. Therefore, we can use the following ratios:
2 mol NaCl : 1 mol H₂SO₄ : 2 mol HCl
Now we can use these ratios to calculate the amount of HCl produced:
2.56 mol NaCl × (1 mol H₂SO₄ / 2 mol NaCl) × (2 mol HCl / 1 mol H₂SO₄) = 2.56 mol HCl
2.00 mol H₂SO₄ × (2 mol HCl / 1 mol H₂SO₄) = 4.00 mol HCl
The limiting reactant is H₂SO₄, since it produces less HCl than NaCl. Therefore, we need to use the amount of H₂SO₄ to calculate the mass of HCl produced:
4.00 mol HCl × 36.46 g/mol = 146 g
Therefore, 146 g of HCl can be prepared from 2.00 mol H₂SO₄ and 2.56 mol NaCl.

Learn more about stoichiometry here

https://brainly.com/question/30215297

#SPJ11

Answer: True

Explanation: one advantage of polymer based casting processes is the no pressure application

The molar mass of [tex](NH4)2SO4[/tex] is approximately 132.16 g/mol, which corresponds to option E.

To calculate the molar mass of (NH4)2SO4, we need to add up the atomic masses of all the atoms present in one mole of the compound:

[tex](NH4)2SO4 = 2(N) + 8(H) + S + 4(O)= 2(14.01 g/mol) + 8(1.01 g/mol) + 32.06 g/mol + 4(16.00 g/mol)= 28.02 g/mol + 8.08 g/mol + 32.06 g/mol + 64.00 g/mol[/tex]

= 132.16 g/mol. The molar mass of a substance is the mass in grams of one mole of the substance. It is expressed in units of grams per mole (g/mol). The molar mass is calculated by adding up the atomic masses of all the atoms present in the chemical formula of the compound.

Learn more about the molar mass here:

https://brainly.com/question/29202809

#SPJ11

As each ice cube contains one mole of water, you would need at least 44.4 ice cubes to cool the liquid water from 20°C to 0°C

To solve this problem, we need to use the equation:
Q = m × c × ΔT
where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
We can first calculate the amount of heat that needs to be transferred from the liquid water to the ice cubes:
Q = m × c × ΔT
Q = 800.0 g × 4.184 J/g°C × (-20°C)
Q = -67,072 J
The negative sign indicates that heat is leaving the liquid water and being absorbed by the ice cubes.
Next, we need to determine how many moles of water are in 800.0 g of liquid water:
n = m/M
n = 800.0 g ÷ 18.015 g/mol
n = 44.4 mol
Therefore, we need at least 44.4 ice cubes, each containing one mole of water, to cool the liquid water from 20°C to 0°C. However, this assumes that all of the heat transferred from the liquid water is used to melt the ice cubes, and none of it is lost to the environment. In reality, we would need more ice cubes to account for any heat loss.

Learn more about heat  here:https://brainly.com/question/1429452

#SPJ11

The reaction between lithium and sulfur forms lithium sulfide (Li₂S) while the reaction between aluminum and iodine forms aluminum iodide (AlI₃). When the two compounds react, a double replacement reaction occurs resulting in the formation of lithium iodide (LiI) and aluminum sulfide (Al₂S₃).

The products of this reaction are thus lithium, aluminum, sulfur, and iodine. However, since lithium and iodine form a stable ionic compound, LiI, it is not present in its elemental form in the products. Therefore, the products contain aluminum, sulfur, and lithium ions (Li⁺) in the form of aluminum sulfide (Al₂S₃) and lithium iodide (LiI).

In summary, the products of the reaction between a compound containing lithium and sulfur and a compound containing aluminum and iodine are aluminum sulfide and lithium iodide. The elements present in the products are aluminum, sulfur, and lithium ions (Li⁺).

To know more about the double replacement reaction refer here :

https://brainly.com/question/19267538#

#SPJ11

In order to determine if two atoms are copper (Cu) atoms, the number of protons will be same for each. Option B is correct.

Copper atoms are an individual particles which make up the element copper (Cu) which is a metal having an atomic number 29 in the periodic table. Each copper atom has 29 protons in its nucleus and an equal number of electrons orbiting around the nucleus in various shells or energy levels.

Copper is known for its thermal conductivity, corrosion resistance, and attractive reddish-orange color. Copper atoms will bond together with other copper atoms or with other elements to form a molecules or compounds with various physical and chemical properties. Copper and its compounds are widely used in electrical wiring, roofing, plumbing, and many other applications.

Hence, B. is the correct option.

To know more about Copper atoms here

https://brainly.com/question/11151224

#SPJ4

--The given question is incomplete, the complete question is

"In order to determine if two atoms are copper (CU) atoms, what must be the same for each? A) the number of valence electrons B) the number of protons C) the charge of the atom D) the size of the atom."--

To ease the installation of impeller wear rings, they can be heated. The correct answer is option c.

Heating the wear rings causes them to expand slightly, allowing for a more straightforward installation process onto the impeller. The expansion of the heated wear ring ensures a secure fit once it cools and contracts back to its original size. This technique is commonly used for interference fits in various mechanical applications.

While lubricating with light oil or greasing with lithium may provide some benefit during the installation process, it does not offer the same level of ease and precision as heating the wear rings. Cooling, on the other hand, would have the opposite effect, causing the wear rings to contract and making the installation process more challenging.

Therefore, option c is correct.

For more such questions on Heating, click on:

https://brainly.com/question/10825119

#SPJ11

If 0.274 moles of a substance weighs 62.5 g, then the molar mass of the substance is 2.28 × 10² g/mol. Hence, option A is correct.

Generally, molecular mass of an element is defined as the sum of the masses of the elements which are present in the molecule. Molecular mass is basically obtained by multiplying the atomic mass of an element with the number of atoms in the molecule and then adding the masses of all the elements in the molecule.

Mass of substance = 62.5 g

Number of moles of substance = 0.274 moles

From the formula,

Number of moles = Given mass / Molar mass

⇒ Molar mass = Given mass / Number of moles

Substituting the values we get,

Molar mass = 62.5 g / 0.274 g =  2.28 × 10² g/mol

Hence, option A is correct.

Learn more about molecular masses from the link given below.

https://brainly.com/question/15880821

#SPJ4