Question 3(Multiple Choice Worth 2 points)
(Appropriate Measures MC)

A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.

5, 5, 6, 8, 10, 15, 18, 20, 20, 20, 20, 20, 20

A graph titled Donations to Charity in Dollars. The x-axis is labeled 1 to 5, 6 to 10, 11 to 15, and 16 to 20. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 1 to 5, up to 3 above 6 to 10, up to 1 above 11 to 15, and up to 7 above 16 to 20.

Which measure of variability should the charity use to accurately represent the data? Explain your answer.

The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 13 is the most accurate to use, since the data is skewed.
The range of 20 is the most accurate to use to show that they have plenty of money.
The IQR of 20 is the most accurate to use to show that they need more money.

The slope of the points in this table is equal to 1.2.

In Mathematics and Geometry, the slope of any straight line can be determined by using this mathematical equation;

Slope (m) = (Change in y-axis, Δy)/(Change in x-axis, Δx)

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Based on the information provided in the table, we can logically deduce the following data points on the line:

Substituting the given points into the slope formula, we have the following;

Slope, m = (3.7 + 1.1)/(1 + 3)

Slope, m = 4.8/4

Slope, m = 1.2.

Read more on slope here: brainly.com/question/3493733

#SPJ1

The Normal model is a good first-choice to model data if the data is normally distributed or approximately normally distributed

Normally distributed or approximately Normally distributed. The Normal distribution, also known as the Gaussian distribution, is a continuous probability distribution that is widely used in statistical modeling due to its mathematical properties and practical applications in many fields.

When the data is Normally distributed, the Normal model provides a good approximation of the underlying distribution of the data. This means that the parameters of the Normal distribution can be estimated from the data using methods such as maximum likelihood estimation, and the resulting model can be used to make predictions and conduct statistical inference.

However, it is important to note that the Normal model may not be appropriate for all types of data, particularly if the data exhibits significant departures from Normality. In such cases, other distributional models or non-parametric methods may be more appropriate.

Learn more about Normal model here

brainly.com/question/23907399

#SPJ4

Answer:

Θ ≈ 21.62°

Step-by-step explanation:

using the sine ratio in the right triangle

sinΘ = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{7}{19}[/tex] , then

Θ = [tex]sin^{-1}[/tex] ( [tex]\frac{7}{19}[/tex] ) ≈ 21.62° ( to the nearest hundredth )

The area of the given figure is 20cm².

What is a kite?

A quadrilateral called a kite has two pairs of sides that are each the same length and are next to one another.

What is area of a kite?

A kite's diagonals are perpendicular. The area of a kite is calculated as half of the diagonal product, which is the same as the area of a rhombus. The formula: can be used to express the area of a kite.

Area of Kite =1/2×D1×D2

D1 is the kite's long diagonal.

D2 is the kite's short diagonal.

when we draw the figure in coordinate system we find that it is shape of a kite,

so area of kite = 1/2*4*4+1/2*4*6

                         = 20 cm²

To know more about kite visit:

https://brainly.com/question/31239785

#SPJ1

Without knowing the specific transformation that maps J, K, I, and M to J', K', I', and M't is not possible to find the exact algebraic rule for the coordinates

Given that

J' (-2,1), K' (1,2), I' (2,-1), M' (1,-3)

Let's say we have a transformation that maps points J, K, I, and M to J', K', I', and M', respectively. Then, the algebraic rule for the coordinates of the transformed points can be found as follows:

Let T represent the transformation that maps points J, K, I, and M to J', K', I', and M', respectively.

Let (x, y) be the coordinates of a point P.

To find the coordinates of T(P), we can apply the same transformation to the coordinates of  P.

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

The probability of having at least one faulty component in your selection is 0.41 or 41%.

The probability of having at least one faulty component in a selection of 5 can be found by calculating the probability of having no faulty components and then subtracting this from 1.

The probability of having no faulty components in a selection of 5 is:

P(no faulty) = (0.9)^5 = 0.59

Therefore, the probability of having at least one faulty component in a selection of 5 is:

P(at least one faulty) = 1 - P(no faulty) = 1 - 0.59 = 0.41

So the probability of having at least one faulty component in your selection is 0.41 or 41%.

To know more about probability, here

brainly.com/question/30034780

#SPJ4

--The complete Question is, You randomly pick 5 components from the bag of 30. What is the probability that you have at least one faulty component in your selection? --

The first option with 2-year term and higher monthly payments is better since it results in less total paid in the end.

An individual borrower can receive a personal loan to utilise for personal, family, or household needs. The majority of personal loans are unsecured, which means they are not secured by property like a house or a car. Instead, the approval of a personal loan is determined by the borrower's creditworthiness and capacity to pay back the loan. The lender decides the loan amount, interest rate, and repayment conditions for a personal loan based on the borrower's credit score, income, and employment history, among other things. Personal loans are frequently used to pay for unforeseen bills, finance home improvements, and consolidate debt.

For the given plans of payment of 2 years and 5 years we have:

Option 1: 24 monthly payments of $354.56 = $8,534.56 total paid.

Option 2: 60 monthly payments of $154.66 = $9,279.60 total paid.

Comparing the total payment for the various years we have see that the plan with 2 years payment is better option.

Hence, the first option with 2-year term and higher monthly payments is better since it results in less total paid in the end.

Learn more about personal loan here:

https://brainly.com/question/31292605

#SPJ1

The mean is 41.37
The Median is 36

The first step is to arrange the number orderly

31, 32,34,35,37,38,40,84

The mean is

= 31 + 32+34+35+38+37+40+84/8

= 331/8

= 41.37

The median

= 35+37/2

= 72/2

= 36

The mode
= N/A

Read more on mean here
https://brainly.com/question/3444558

#SPJ1

The probability that Amber does not arrive at work by 9 am is calculated by summing the probabilities of two scenarios: the bus being on time and Amber not arriving by 9 am and the bus being late and Amber not arriving by 9 am. The calculated probability for her late arrival at work is 17/60.

The subject of this problem is probability. There are two scenarios in which Amber may not arrive at work by 9 am: either the bus is on time but she does not arrive by 9 am or the bus is late and she does not arrive by 9 am.

First, let's consider the probability that Amber's bus arrives on time, which is said to be 5/6. If her bus is on time, the probability that she arrives at work by 9 am is 4/5, which means that the probability she does not arrive by 9 am is 1-4/5 = 1/5. Therefore, the probability that the bus is on time and she does not arrive by 9 am is 5/6 * 1/5 = 1/6.

Alternatively, consider the scenario where the bus is late. We can find the probability of this by subtracting the probability that the bus is on time (5/6) from 1, so the probability that the bus is late is 1/6. If her bus is late, the probability she arrives at work by 9 am is 3/10, implying that the probability she does not arrive by 9 am is 1-3/10 = 7/10. Hence, the probability that the bus is late and she does not arrive at work by 9 am equals 1/6 *7/10 = 7/60.

Thus, the total probability that Amber does not arrive at work by 9 am is 1/6 + 7/60 = 10/60 + 7/60 = 17/60.

https://brainly.com/question/32117953

#SPJ11

The standard error measures the variability of the sample mean from the true population mean. It represents the standard deviation of the sampling distribution of the mean and gives an estimate of how much the sample means will vary from one sample to another.

b. When calculating the standard error of the mean, we assume that the sample was randomly selected from the population, and that the sample size is large enough (usually, n > 30) for the central limit theorem to apply.

c. To reduce the standard error of their estimate of the mean home range size, researchers could increase the sample size, which will decrease the standard error by reducing the variability of the sampling distribution of the mean.

Alternatively, they could improve the precision of their measurements or reduce measurement errors to decrease the standard deviation of the sample, which will also decrease the standard error.

Learn more about standard deviation

https://brainly.com/question/23907081

#SPJ4

A company claims that its tablet computers have an average recharge time of 3 hours with a standard deviation of 1.4 hours. Using a random sample of 50 company tablet computers, a consumer group determines a mean recharge time of 2.5 hours. H0: µ = 3 Ha: µ < 3 a = 5% σ = 1.4 z* = –1.65.

Based on the given information, we can perform a one-sample z-test to determine if the sample mean of 2.5 hours is significantly different from the claimed population mean of 3 hours, with a significance level of 0.05.

The null hypothesis H0 is that the population mean recharge time µ is equal to 3 hours, and the alternative hypothesis Ha is that µ is less than 3 hours.

We will find the test statistic z using the formula

z = (x - µ) / (σ / √n)

Where x is the sample mean of 2.5 hours, µ is the population mean of 3 hours, σ is the population standard deviation of 1.4 hours, and n is the sample size of 50.

z = (2.5 - 3) / (1.4 / √50) = -2.38

The calculated test statistic z of -2.38 is less than the critical value z* of -1.65 at a significance level of 0.05, indicating that we can reject the null hypothesis H0.

Hence, we can conclude that the mean recharge time of the company tablet computers is less than 3 hours, based on the sample of 50 tablets tested by the consumer group.

To know more about standard deviation here

https://brainly.com/question/12032692

#SPJ4

The number of hours that it will 2000-km flight would be = 2.5 hours.

The number of hours can be determined when a straight line is being drawn from the origin of the graph and allowing it to pass through most of the interceptions.

Therefore, form the graph, the amount of hours that it will take the 2000-km flight would be = 2.5 hours approximately.

Learn more about graphs here:

https://brainly.com/question/25799000

#SPJ1

Answer: $3.75

Step-by-step explanation:

Since apples cost $1.25 per pound and she needs to buy 3 pounds, the total cost would be $1.25*3 = $3.75.

The missing factor in the second equation is 1, and the completed equation is: -24y + (-5) = -4(6y + 5/4)

We know that the GCF of -24y and -20 is 4. To find the missing factor in each equation, we can divide both terms by the GCF of 4.

For the first equation, we have:

-24y = 4 * (-6y)

Dividing both sides by 4, we get:

-6y = -24/4

Simplifying, we get:

-6y = -6

Therefore, the missing factor in the first equation is -1, and the completed equation is:

-24y + 20 = -4(6y - 5)

For the second equation, we have:

-20 = 4 * (-5)

Dividing both sides by 4, we get:

-5 = -20/4

Simplifying, we get:

-5 = -5/1

Therefore, the missing factor in the second equation is 1, and the completed equation is:

-24y + (-5) = -4(6y + 5/4)

Learn more about GCF at https://brainly.com/question/219464

#SPJ1

The perimeter of the figure is as follows

1. 93 cm

2. 42 cm

3. 45 cm

Perimeter is the total length of the boundary of a two-dimensional shape or figure. In other words, it is the sum of the lengths of all the sides or edges of the shape.

Perimeter is measured in units of length, such as centimeters, meters, or feet, depending on the system of measurement being used.

The perimeter of the figures is solved as follows

1.

= 12 + 15 + 20 + 11 + 7 + 10 + 6 + 12

= 93 cm

2.

= 8 + 12 + 5 + 5 + 12

= 42 cm

3.

= 15 + 15 + 15

= 45 cm

Learn more about perimeter at

https://brainly.com/question/19819849

#SPJ1

The expression 7∛7 - ∛128 is: 49∛7 - 8∛2.

We can simplify this expression using the fact that ∛(a * b) = ∛a * ∛b and ∛(a^3) = a.

First, let's factor ∛128 into prime factors: ∛128 = ∛(2^7) = 2 * ∛(2^5) = 2 * ∛(32).

Next, we can simplify 7∛7 as much as possible:

7∛7 = ∛(7^3) * ∛7 = 7∛(7^2) * ∛7 = 7 * 7∛7.

Now we can substitute these simplifications into the original expression:

7∛7 - ∛128 = 7 * 7∛7 - 2 * ∛32

We can simplify ∛32 as follows:

∛32 = ∛(2^5) = 2 * ∛(2^2) = 4∛2

Now, we can substitute this back into the expression:

7 * 7∛7 - 2 * ∛32 = 7 * 7∛7 - 2 * 4∛2

= 49∛7 - 8∛2

So the simplified expression is 49∛7 - 8∛2.

Learn more about expression  here:https://brainly.com/question/1859113

#SPJ1

Answer: Empirical Exercise 8.2(l) involves running a regression to estimate the relationship between two variables of interest. In evaluating the internal validity of the regression used to answer this exercise, we need to consider several potential sources of bias and other issues that could affect the accuracy of the estimated relationship.

Omitted variable bias: This occurs when a relevant variable is left out of the regression model. If this happens, the estimated coefficients may be biased and inconsistent. For example, if we are estimating the effect of education on earnings but fail to include information about work experience, the coefficient on education may be biased upwards.

Misspecification of the functional form of the regression: If the relationship between the dependent variable and the independent variable(s) is nonlinear, we may need to use a different functional form of the regression equation to obtain accurate estimates. If we fail to do so, the estimated coefficients may be biased and inconsistent.

Errors in variables: When measurement errors occur in the independent variable(s), this can cause the estimated coefficients to be biased and inconsistent.

Sample selection: If the sample used to estimate the regression equation is not representative of the population of interest, then the estimated coefficients may be biased and inconsistent.

Simultaneous causality: When there is a two-way causal relationship between the dependent variable and the independent variable(s), it may not be possible to determine the direction of causality from the regression coefficients.

Inconsistency of the OLS standard errors: If there is heteroskedasticity or autocorrelation in the data, then the ordinary least squares (OLS) standard errors may be inconsistent. This can lead to incorrect conclusions about the statistical significance of the estimated coefficients.

To address these issues, researchers should take care to select an appropriate sample, use a suitable functional form of the regression equation, and account for any relevant variables that could be omitted or measured with errors. It may also be necessary to use alternative statistical techniques to account for simultaneous causality or heteroskedasticity in the data. Finally, researchers should always test the robustness of their results to different model specifications and sensitivity to potential sources of bias.

Step-by-step explanation:

A simplification of the polynomial is -c³ + 2c² - 9c + 1.

The degree of the polynomial is equal to 3.

The leading coefficient of the polynomial is equal to -1.

The constant of the polynomial is equal to 1.

In Mathematics and Geometry, a polynomial function is a mathematical expression which comprises intermediates (variables), constants, and whole number exponents with different numerical value, that are typically combined by using mathematical operations such as the following:

Next, we would subtract the two (2) given polynomials as follows;

Expression = (c³ + 2c² - 5c) - (2c³ + 4c - 1)

Expression = c³ + 2c² - 5c - 2c³ - 4c + 1

By rearranging the given polynomials by combining like terms, we have;

Expression = -c³ + 2c² - 9c + 1

Where:

The degree = 3.

The leading coefficient = -1.

The constant = 1.

Read more on polynomial here: brainly.com/question/3724034

#SPJ1

A total of 55.86 minutes have gone by since Greg started his run on the treadmill.

If Greg has completed 57% of his run, it means he has 43% of his run remaining.

To find out how many minutes have gone by, we can use proportions.

Let's say x is the total number of minutes Greg needs to complete his run:

x = 57% * 98 minutes

Evaluate

x =  minutes

Therefore, approximately 55.86 minutes have gone by since Greg started his run on the treadmill.

Read more about proportion at

https://brainly.com/question/1781657

#SPJ1

Answer:

24   +    28

2*2*2*3   +    2*2*7              [prime factors]

You may distribute any common ones, for example:

  4(6+7)              [that is, 2*2*(2*3 + 7)

  2(12+14)

Answer:

Corina makes $27 for every 2 hours that she works, so she makes $13.50 for every hour she works (since 2 times $13.50 equals $27).

If she worked 36 hours this week, then she made:

$13.50 x 36 = $486

Therefore, Corina made $486 this week.

Step-by-step explanation:

Answer: $486

Step-by-step explanation:

27/2= 13.5

$13.5 per hour

13.5 x 36 = $486

SA = 2lw + 2lh + 2wh = 42 m^2 ... (1)

And the volume of the original prism is given by:

V = lwh = 18 m^3 ... (2)

If you enlarge the dimensions of the prism by a factor of 4, then the new dimensions will be 4l, 4w, and 4h. The new surface area of the prism will be:

New SA = 2(4l)(4w) + 2(4l)(4h) + 2(4w)(4h)

= 32lw + 32lh + 32wh

= 32(2lw + 2lh + 2wh)

= 32(42)

= 1344 m^2

So, the surface area of the enlarged prism is 1344 m^2.

Similarly, the new volume of the prism will be:

New V = (4l)(4w)(4h)

= 64lwh

= 64(18)

= 1152 m^3

So, the volume of the enlarged prism is 1152 m^3.

Therefore, the surface area of the prism is 1344 m^2 and the volume of the prism is 1152 m^3 after the dimensions are enlarged by a factor of 4.

*IG:whis.sama_ent

If the circumference of a circle is 4, we can use the formula for the circumference of a circle, C=2πr, where C is the circumference, r is the radius, and π is the mathematical constant pi.

Substituting C=4 and r=2 into the formula, we have:

4 = 2π(2)

Solving for π, we get:

π = 4/(2*2) = 1

Therefore, the value of pi is 1, which is not correct. This means that there is an error in the given information. The circumference of a circle cannot be 4 when the radius is 2, as the circumference must be greater than the diameter (which is twice the radius).

As a result, it is not possible to accurately determine the diameter or area of the circle with the given information.

~~~Harsha~~~

There are 60 apples in the bag

Let y represent the total number of apples that is in the bag

36/y= 60/100

cross multiply both sides

60y= 36×100
60y= 3600

Divide both sides by the coefficient of y which is 60

60y/60= 3600/60

y= 60

Hence the total number of apples in the bag is 60 apples

Read more on apples here

https://brainly.com/question/10150579

#SPJ1

Filing separate returns as single taxpayers would yield a lower tax liability for Leni and Thom, by an amount of $134,722.50 - $42,698.50 = $92,024.50.

Tax liability is the sum that a person or business owes the government in taxes. Although it frequently consists of sales tax and capital gains tax, it is typically calculated as a percentage of one's income.

To determine which filing status would yield the lower tax for Leni and Thom, we need to compare the tax liability for each filing status. We will use the 2021 tax brackets and tax rates provided in Schedules X and Y-1.

Assuming that Leni and Thom have no dependents, the taxable income for each of them is $230,000.

If they file a joint return for the entire year (i.e., they get married in December), their taxable income would be $460,000, which falls in the 35% tax bracket. Using the tax table in Schedule X, their tax liability would be:

$24,800 + 35% of the amount over $171,050 = $24,800 + 35% x ($460,000 - $171,050) = $24,800 + $109,922.50 = $134,722.50

If they file separate returns as single taxpayers for the entire year (i.e., they get married in January), each of their taxable incomes would be $230,000, which also falls in the 35% tax bracket. Using the tax table in Schedule Y-1, their tax liability would be:

$14,125 + 35% of the amount over $209,425 = $14,125 + 35% x ($230,000 - $209,425) = $14,125 + $7,224.25 = $21,349.25

Therefore, filing separate returns as single taxpayers would yield a lower tax liability for Leni and Thom, by an amount of $134,722.50 - $42,698.50 = $92,024.50. This is known as the "marriage penalty," where couples with similar incomes who file jointly pay more in taxes than they would if they were single and filing separately.

Learn more about tax liability on:

https://brainly.com/question/16950901

#SPJ1

The correct statement regarding the annual interest rate for the given equations is (A) For A = P(1.025), the principal amount of money is increasing at a 2.5% interest rate.

What is an equation?

An equation is a mathematical statement that shows that two expressions are equal. It consists of two sides separated by an equals sign (=).

In the equation A = P(1 + r)t, the annual interest rate is represented by the variable "r". It is not correct to directly interpret the value of (1 + r) as the interest rate, as it represents the factor by which the principal amount is multiplied over time to yield the total amount.

Let's analyze each given equation to see which statement correctly relates information regarding the annual interest rate:

(A) For A = P(1.025), the equation does not have a term for time (t), so it cannot represent the growth of a principal amount over time. It simply represents the total amount (A) as 102.5% of the principal amount (P), which means that the interest rate is 2.5% per year.

(B) For A = P(1.0052), similar to the previous equation, this equation does not have a term for time (t), so it cannot represent the growth of a principal amount over time. It simply represents the total amount (A) as 100.52% of the principal amount (P), which means that the interest rate is 0.52% per year.

(C) For A = P(0.86)t, the value of (0.86) represents the factor by which the principal amount is multiplied over time to yield the total amount. Since (0.86) is less than 1, it means that the principal amount is decreasing over time, not increasing. The interest rate in this case is -14% per year (negative because the principal amount is decreasing).

(D) For A = P(0.68)t, similar to the previous equation, the value of (0.68) represents the factor by which the principal amount is multiplied over time to yield the total amount. Since (0.68) is less than 1, it means that the principal amount is decreasing over time, not increasing. The interest rate in this case is -32% per year (negative because the principal amount is decreasing).

Therefore, the correct statement regarding the annual interest rate for the given equations is:

(A) For A = P(1.025), the principal amount of money is increasing at a 2.5% interest rate.

To know more about equations visit:

brainly.com/question/17499155

#SPJ1

The given statement after evaluating and considering the other options is false. Due to the criteria it falls under elaborates the  case of statistically significant change is to be present while comparing the math scores  between the two groups, In short there will always be difference between two group s while we compare them on a particular topic .

From here on we can come to the conclusion that the difference was not due to chance occurrence.

A statistically significant change  refers to process which is  unlikely to be elaborated solely by chance and random factors.

In short, a statistically significant  has a very less chances  of taking place if there is no true effect in a research study.

The famous examples of statistical significance of finding are

To learn more about statistical significance,

brainly.com/question/15848236

#SPJ4

Answer:

x < 1.175

Step-by-step explanation:

-0.4x + 1.27 > 0.8

-0.4x > -0.47

x < 1.175

The sequence of transformation that maps ΔABC to ΔDEF is a rotation of 90° about the origin and a translation 2-units down.

An thing rotates when it moves about its own axis. This can be used to describe the rotation of natural items like wheels and gears as well as the rotation of celestial bodies like planets and stars. A fundamental idea in physics, rotation is used to describe a variety of motions.

The act of shifting an object from one point to another without altering its size, shape, or orientation is referred to as translation. The coordinates of each point in the object are adjusted by a set amount to achieve this. In geometry and computer graphics, translation is a type of transformation that is frequently used to reposition objects on a two-dimensional plane or in three-dimensional space. In physics, the term "translation" can also refer to an object moving straight ahead without rotating or deforming.

Learn more about transformation here:

https://brainly.com/question/12600259

#SPJ1