As a coagulant, sodium hypochlorite would not be employed. As a result, option D is right.
In water treatment, the coagulation is very important step that involve the use of chemicals,. Sedimentation or filtration can then be used to remove the coagulated particles. In water treatment, coagulants such as black alum, chlorinated copperas, and ferric chloride are utilized.
Sodium hypochlorite, is a preferred disinfectant and not a coagulant. It is effective against germs and viruses but lacks coagulation characteristics. Option D is therefore true, and sodium hypochlorite would not be utilized as a coagulant.
To know more about coagulation, visit,
https://brainly.com/question/1501224
#SPJ4
__________ is required to break covalent bonds between atoms.
(double/triple, coordinate covalent bond, energy, bond dissociation energy, resonance structure)
Bond dissociation energy is required to break covalent bonds between atoms. Bond dissociation energy (BDE) is the energy required to break a covalent bond between two atoms in a molecule.
Here are some additional points about bond dissociation energy:
BDE varies depending on the identity of the atoms involved in the bond and the bonding environment.BDE values can be calculated using computational methods, such as density functional theory.The bond dissociation energy of a molecule can influence its reactivity and stability.Chemical reactions can involve the breaking and forming of bonds with different BDEs, which can affect the overall energy change of the reaction.This energy is necessary to overcome the attractive forces between the positively charged nuclei and negatively charged electrons. BDE is typically measured in units of kilojoules per mole (kJ/mol).
Learn More About Atoms
https://brainly.com/question/441927
#SPJ11
Hydrogen molecules, with a molar mass of 2.016 g/mol, in a certain gas have an rms speed of 320 m/s. show answer No Attempt What is the temperature of this gas, in kelvins
The temperature of the gas in kelvins is approximately 6933 K.
The temperature of a gas is related to the average kinetic energy of its molecules. The root-mean-square (rms) speed of the hydrogen molecules is related to their average kinetic energy through the equation:
rms speed = sqrt(3kT/m)
where k is the Boltzmann constant, T is the temperature in kelvins, and m is the molar mass of the gas in kilograms.
We can rearrange this equation to solve for the temperature T:
T = (m * rms speed^2) / (3k)
Substituting the values given, we have:
T = (2.016 g/mol * (320 m/s)^2) / (3 * 1.38 x 10^-23 J/K)
T = 6933 K
For more such questions on temperature
https://brainly.com/question/4735135
#SPJ11
What is the coefficient of oxygen gas after balancing the following equation?___P(s) + ___O2(g) â ___P2O3(s)
The coefficient of oxygen gas after balancing the equation is 3.
To balance the given equation, we need to find the correct coefficients for the reactants and products involved. The equation is:
___P(s) + ___O2(g) → ___P₂O₃(s)
First, let's balance the phosphorus (P) atoms:
2P(s) + ___O2(g) → 1P₂O₃(s)
Now, let's balance the oxygen (O) atoms:
2P(s) + 3/2O₂(g) → 1P₂O₃(s)
However, having a fraction (3/2) as a coefficient is not ideal, so we can multiply the entire equation by 2 to get whole number coefficients:
4P(s) + 3O₂(g) → 2P₂O₃(s)
Thus, the balanced equation is:
4P(s) + 3O₂(g) → 2P₂O₃(s)
The coefficient of oxygen gas (O₂) in the balanced equation is 3.
Learn more about the coefficients at https://brainly.com/question/29065673
#SPJ11
Why does less evaporation mean higher temperatures in urban areas?
Less evaporation means that less of the sun's energy is used to convert water into water vapor, and more of it is used to heat up the surface. In urban areas, there is typically less vegetation and more impervious surfaces (such as concrete and asphalt), which reduces the amount of water that can evaporate.
This means that more of the sun's energy is absorbed by the surface, leading to higher temperatures. Additionally, buildings and other structures in urban areas can trap heat and prevent it from dissipating, further contributing to the urban heat island effect.
In rural areas, vegetation and soil moisture play an important role in regulating temperature through a process called evapotranspiration. Evapotranspiration is the combined process of water evaporation from the soil and plant transpiration. It helps to cool the air by removing heat from the surface through the transfer of water from the surface to the atmosphere.
In contrast, urban areas have a significant amount of impervious surfaces like concrete, asphalt, and buildings, which reduce the amount of vegetation and soil moisture. As a result, urban areas have less evapotranspiration, which means less cooling effect from the evaporation of water. This leads to a higher surface temperature in urban areas.
Furthermore, urban areas have a higher proportion of dark-colored surfaces, such as asphalt and concrete, which absorb more solar radiation than lighter-colored surfaces like vegetation and soil. This is known as the "urban heat island effect," which further contributes to higher temperatures in urban areas.
For more question on evaporation click on
https://brainly.com/question/8944874
#SPJ11
From this reaction, ∆G°=-RTlnK we can conclude:If ∆G° <0 then K ___ 1 (<,>,=)If ∆G° = 0 then K ___ 1 (<,>,=)If ∆G° > 0 then K ___ 1 (<,>,=)
From the reaction, ∆G° = -RT ln K, we can conclude the following:
1)If ∆G° < 0, then K > 1. This means that the reaction is spontaneous and favors the formation of products over reactants at standard conditions.
2)If ∆G° = 0, then K = 1. This means that the reaction is at equilibrium, and the concentrations of products and reactants are equal at standard conditions.
3)If ∆G° > 0, then K < 1. This means that the reaction is non-spontaneous and favors the formation of reactants over products at standard conditions.
4)In summary, the sign of ∆G° determines whether a reaction is spontaneous or non-spontaneous, while the value of K indicates the extent to which the reaction favors either the products or the reactants.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
In the reduction reaction, the hot water and the 95% ethanol act as a solvent pair for the benzil. Which is the better solvent and which is the poorer one?
In the reduction reaction involving benzil, hot water and 95% ethanol act as a solvent pair. Among the two, ethanol is the better solvent as it can dissolve benzil more efficiently, while hot water serves as the poorer solvent due to its lower solubility for benzil.
In the reduction reaction, the 95% ethanol is the better solvent for benzil as it is able to dissolve more of the compound due to its polar nature. Hot water, on the other hand, is a poorer solvent for benzil as it is less polar and less able to dissolve the compound. However, both solvents are necessary for the reduction reaction as they help to create the necessary conditions for the reduction of benzil to take place.
To know more about relation between solvent and its polar nature
please click:-
https://brainly.com/question/30434187
#SPJ11
How many carbon atoms are there in 15 lbs of sugar, C12H22O11?A) 4.1 x 1028 C atoms D) 2.6 x 1022 C atomsB) 1.2 x 1026 C atoms E) 3.2 x 1023 C atomsC) 1.4 x 1026 C atoms
To calculate the number of carbon atoms in 15 lbs of sugar, we need to first determine the molar mass of C₁₂H₂₂O₁₁ and the number of moles of C₁₂H₂₂O₁₁ in 15 lbs of the compound.
To determine the number of carbon atoms in 15 lbs of sugar (C₁₂H₂₂O₁₁), we need to first calculate the molar mass of C₁₂H₂₂O₁₁:
Molar mass of C₁₂H₂₂O₁₁ = (12 × 12.01 g/mol) + (22 × 1.01 g/mol) + (11 × 16.00 g/mol) = 342.3 g/mol
Next, we need to calculate the number of moles of C₁₂H₂₂O₁₁ in 15 lbs:
1 lb = 0.4536 kg
15 lbs = 6.804 kg
Number of moles of C₁₂H₂₂O₁₁ = (6.804 kg) / (342.3 g/mol) = 19.88 mol
Finally, we can calculate the number of carbon atoms:
Number of carbon atoms = (12 atoms/mol) × (19.88 mol) = 238.5 ≈ 2.4 × 10^2 carbon atoms
Therefore, the answer is option D) 2.6 x 10^22 C atoms.
Learn more about carbon atoms here:
https://brainly.com/question/21850455
When milk is heated, what milk components are found in the skin formed on the surface?
When milk is heated, a skin or film forms on the surface due to the denaturation of proteins such as casein and whey. This skin contains primarily proteins and lipids, which are the main components of milk. The proteins in the skin are primarily caseins, which are the major protein component of milk, while the lipids are primarily triglycerides. Other components of milk, such as lactose and minerals, are not typically found in the skin formed on the surface.
These components rise to the surface due to heat-induced coagulation and the evaporation of water, leading to the formation of a skin-like layer.
To know more about milk and rennin, click here:-
https://brainly.com/question/21077458
#SPJ11
You react 2-fluorobutane and 1-bromobutane with sodium iodide in acetone. Which alkyl halide would theoretically yield precipitate in this reaction faster? Provide reason.
In this reaction, you are reacting 2-fluorobutane and 1-bromobutane with sodium iodide in acetone. The alkyl halide that would theoretically yield precipitate faster in this reaction is 1-bromobutane. The reason for this is due to the difference in reactivity of the halogens involved.
The 2-fluorobutane would theoretically yield a precipitate faster in the reaction with sodium iodide in acetone compared to 1-bromobutane. This is because fluorine (F) is a stronger halogen than bromine (Br) in terms of reactivity in nucleophilic substitution reactions.
In nucleophilic substitution reactions, a halogen atom in an alkyl halide is replaced by a nucleophile. The reactivity of alkyl halides towards nucleophilic substitution reactions depends on the nature of the halogen atom attached to the alkyl group. Fluorine is the most electronegative element among the halogens, and the C-F bond is the strongest and most polarized among the C-X bonds (where X represents a halogen). As a result, alkyl fluorides tend to be more reactive in nucleophilic substitution reactions compared to alkyl chlorides, bromides, or iodides.
In the given reaction, sodium iodide (NaI) is a nucleophile that would replace the halogen atom in the alkyl halide via a nucleophilic substitution reaction. Since fluorine is more reactive than bromine, 2-fluorobutane (which has a fluorine atom) would be expected to undergo the nucleophilic substitution reaction with sodium iodide faster than 1-bromobutane (which has a bromine atom). Therefore, 2-fluorobutane would theoretically yield a precipitate faster in this reaction compared to 1-bromobutane.
To know more about fluorine ,
https://brainly.com/question/1940697
#SPJ11
Rank the following molecules in terms of their carbonyl stretching frequency, v(C=O), in the infrared spectrum. 2-cyclohexenone 2,4-cyclohexadienone cyclohexanone Highest Frequency Carbonyl Stretch Lowest Frequency Carbonyl Stretch 2.4-cyclohexaceenone cyclohexenone 2-cyclohexenone
The carbonyl stretching frequency in the infrared spectrum depends on the nature of the carbonyl group and the adjacent functional groups or substituents. Based on this, we can rank the given molecules in terms of their carbonyl stretching frequency, from highest to lowest:
2,4-cyclohexadienone > 2-cyclohexenone > cyclohexenone > cyclohexanone
In general, a carbonyl group adjacent to an electron-withdrawing group will have a higher stretching frequency compared to a carbonyl group adjacent to an electron-donating group.
In 2,4-cyclohexadienone, the two carbonyl groups are conjugated with each other and with the double bonds in the ring, resulting in a very high carbonyl stretching frequency. In 2-cyclohexenone, the carbonyl group is conjugated with the double bond in the ring, resulting in a slightly lower stretching frequency.
In cyclohexenone, the carbonyl group is adjacent to a single double bond in the ring, resulting in a lower stretching frequency compared to 2-cyclohexenone. In cyclohexanone, the carbonyl group is not conjugated with any other functional group, resulting in the lowest carbonyl stretching frequency among the given molecules.
For more question on infrared spectrum click on
https://brainly.com/question/5951360
#SPJ11
Question 46
The increase of dissolved solids due to evaporation in whirlpools, hot tubs and spas is indicated by
a. increased water temperature
b. condensation
c. cloudy water
d. foamy water
The increase of dissolved solids due to evaporation in whirlpools, hot tubs and spas is indicated by increased water temperature. The correct answer is option a.
When water evaporates from whirlpools, hot tubs, and spas, the concentration of dissolved solids in the water increases. This happens because the water evaporates, leaving behind the minerals and other substances that were dissolved in it. As a result, the water becomes more concentrated, and the temperature of the remaining water increases as well.
This increase in dissolved solids can lead to several problems, including cloudiness and foaming of the water. Cloudy water occurs when the dissolved solids in the water reach a level where they become visible to the exposed eye. Foaming can occur when the water contains high levels of detergents or other substances that cause suds to form.
To prevent these problems, it is important to monitor the water in whirlpools, hot tubs, and spas regularly and add chemicals as needed to maintain the proper balance of dissolved solids. Regular maintenance and cleaning can also help keep the water clean and clear.
Therefore, option a is correct.
For more such questions on evaporation, click on:
https://brainly.com/question/8944874
#SPJ11
A magnesium ion, Mg2+, hasA) 12 protons and 13 electrons. D) 24 protons and 22 electrons.B) 24 protons and 26 electrons. E) 12 protons and 14 electrons.C) 12 protons and 10 electrons.
A magnesium ion, Mg2+, has correct answer is option E) 12 protons and 14 electrons.
The correct answer is option E) 12 protons and 14 electrons. This is because the atomic number of magnesium, which is the number of protons in its nucleus, is 12. When it loses two electrons to become an ion, it still has 12 protons but now only 10 electrons. Therefore, the charge on the ion is 2+ (written as Mg2+). Options A, B, C, and D have incorrect numbers of protons and electrons for a magnesium ion.
Mg2+, an ion of magnesium, contains 12 protons and 14 electrons. This is so because magnesium has 12 protons, or its atomic number, in its nucleus. It still has 12 protons but only 10 electrons when it loses two electrons to become an ion. As a result, the ion has a 2+ charge, represented by the symbol Mg2+. For a magnesium ion, the protons and electrons in Options A, B, C, and D are in the wrong proportions.
To know more about magnesium ion click here:
https://brainly.com/question/1698012
#SPJ11
22. In a linked-based implementation of the ADT list with only a head reference, what is the performance of adding an entry at the end of the list? a. O(n) b. O(n 2 ) c. O(log n) d. O(1)
In a linked-based implementation of the ADT list with only a head reference, the performance of adding an entry at the end of the list is O(1). So the correct option is d.
In a linked-based implementation of an Abstract Data Type (ADT) list with only a head reference, the performance of adding an entry at the end of the list is generally not optimal. This is because, without a tail reference (i.e., a reference to the last node in the list), adding an entry at the end of the list would require traversing the entire list from the head to the last node, which takes linear time.
Therefore, the time complexity for adding an entry at the end of the list in a linked-based implementation with only a head reference would typically be O(n), where n is the number of elements in the list. This is because the time taken for the operation increases linearly with the size of the list, as each element may need to be traversed before reaching the end of the list to add the new entry.
To know more about Abstract Data Type,
https://brainly.com/question/13143215
#SPJ11
Question 91
Dairy equipment can be disinfected with a chlorine solution of a. 20 mg/l
b. 2 mg/l
c. 200 mg/l
d. 220 mg/l
The answer is c. Dairy equipment can be disinfected with a chlorine solution of 200 mg/l. This is the recommended concentration for effective disinfection of dairy equipment to prevent the growth of harmful bacteria.
It is important to properly clean the equipment before applying the chlorine solution to ensure that it is fully effective in eliminating any potential pathogens. Typically, a chlorine solution is one that contains chlorine, most frequently in the form of sodium hypochlorite or calcium hypochlorite. These solutions are frequently employed as sanitizers and disinfectants in a range of settings, such as water treatment, swimming pool upkeep, and home cleaning. Depending on how it will be used, the solution's chlorine content may change. For instance, although a professional swimming pool sanitizer may include up to 12% calcium hypochlorite, a common domestic bleach solution has only around 5% sodium hypochlorite.
Learn more about chlorine solution here:
https://brainly.com/question/31142500
#SPJ11
When fully opened, which valve will have the highest head loss?
a.) Gate valve
b.) Plug valve
c.) Globe valve
d.) Ball valve
Answer:
Globe valve
[tex]hope \: it \: helps[/tex]
Question 34 Marks: 1 The gases frequently found in water that encourage corrosion areChoose one answer. a. methane and oxygen b. oxygen and carbon dioxide c. chlorine and carbon dioxide d. methane and hydrogen sulfide
The gases that are frequently found in water and can encourage corrosion are oxygen and carbon dioxide. These gases can react with metal surfaces, resulting in the formation of rust and other types of corrosion. Oxygen is a highly reactive gas that can cause the oxidation of metals, while carbon dioxide can lower the pH of water, making it more acidic and corrosive.
Chlorine and hydrogen sulfide are also known to cause corrosion, but they are not as common in water as oxygen and carbon dioxide. In order to prevent corrosion, it is important to control the levels of these gases in water, as well as other factors that can contribute to corrosion, such as temperature, pressure, and impurities. Corrosion can lead to damage and failure of equipment and infrastructure, so it is important to take steps to mitigate its effects. This can include using protective coatings, monitoring water quality, and implementing corrosion control measures.
These gases can react with metal surfaces, causing corrosion over time. Oxygen, when dissolved in water, can initiate an electrochemical reaction that leads to the oxidation of the metal, while carbon dioxide forms carbonic acid in the water, which can decrease the pH and promote acidic corrosion. This is a common issue in the water industry, where pipes and equipment are exposed to these gases and must be maintained regularly to minimize the effects of corrosion.
learn more about corrosion here: brainly.com/question/489228
#SPJ11
In order to determine if two atoms are copper (CU) atoms, what must be the same for each?
the number of valence electrons
the number of protons
the charge of the atom
the size of the atom
In order to determine if two atoms are copper (Cu) atoms, the number of protons will be same for each. Option B is correct.
Copper atoms are an individual particles which make up the element copper (Cu) which is a metal having an atomic number 29 in the periodic table. Each copper atom has 29 protons in its nucleus and an equal number of electrons orbiting around the nucleus in various shells or energy levels.
Copper is known for its thermal conductivity, corrosion resistance, and attractive reddish-orange color. Copper atoms will bond together with other copper atoms or with other elements to form a molecules or compounds with various physical and chemical properties. Copper and its compounds are widely used in electrical wiring, roofing, plumbing, and many other applications.
Hence, B. is the correct option.
To know more about Copper atoms here
https://brainly.com/question/11151224
#SPJ4
--The given question is incomplete, the complete question is
"In order to determine if two atoms are copper (CU) atoms, what must be the same for each? A) the number of valence electrons B) the number of protons C) the charge of the atom D) the size of the atom."--
is this adding of yeast to hydrogen peroxide a physical or chemical change.
Answer:
Chemical Reaction
Explanation:
A chemical reaction is a process in which substances undergo a chemical change to form a different substance. In this reaction, the hydrogen peroxide is catalyzed by the yeast to release the oxygen molecules.
Please mark as brainlist.
What is the Effects of H bonding on BP and VP
The effects of hydrogen bonding on boiling point (BP) and vapor pressure (VP) are as follows:
1. Boiling point: Hydrogen bonding increases the boiling point of a compound.
2. Vapor pressure: Hydrogen bonding decreases the vapor pressure of a compound.
1. This is because hydrogen bonds are strong intermolecular forces that require a lot of energy to break. As a result, it takes more energy to convert a hydrogen-bonded molecule from a liquid to a gas, which leads to a higher boiling point.
2. This is because hydrogen bonds restrict the motion of molecules in the liquid phase and make it harder for them to escape into the gas phase. As a result, a hydrogen-bonded liquid has a lower vapor pressure than a non-hydrogen-bonded liquid at the same temperature.
Hydrogen bonding is a type of intermolecular force that occurs when a hydrogen atom is covalently bonded to an electronegative atom (such as nitrogen, oxygen, or fluorine) and interacts with another electronegative atom in a nearby molecule.
In summary, hydrogen bonding has a significant impact on the physical properties of a compound, including its boiling point and vapor pressure.
For more question on Hydrogen bonding click on
https://brainly.com/question/24317372
#SPJ11
In the Calvin cycle, how many ATP molecules are required to regenerate RuBP from five G3P molecules? - 2- 4- 5- 3- 1
In the Calvin cycle, five ATP molecules are required to regenerate RuBP from five G3P molecules. Thus, option (II) is the correct answer.
In the Calvin cycle, there are three steps involved:
1. Carbon Fixation: In this step, the carbon molecule is fixed that is the Carbon atom from carbon dioxide is fixed by conjugation with RuBP. In this step, no ATP molecules are required.
2. Reduction: This step involves the reduction of the fixed carbon, into the formation of carbohydrates. This step requires 2 ATP for each G3P molecule.
3. Regeneration of RuBP: This step is used to regenerate the used RuBP molecule used in the first step which is the fixation of carbon. This step requires one ATP per G3P molecule.
Therefore, for 5 G3P molecules, we require 5 * 1 ATP which comes out to be 5 ATP molecules.
Learn more about the Calvin cycle:
https://brainly.com/question/920840
#SPJ4
Calculate the number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane.
The number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane is 15.5 L.
When propane (C3H8) is burned completely with oxygen (O2), it produces carbon dioxide (CO2) and water vapor (H2O). The balanced chemical equation for the reaction is: C3H8 + 5O2 → 3CO2 + 4H2O
From the balanced equation, we can see that 1 mole reacts with 5 moles of oxygen to produce 3 moles of carbon dioxide. Its molar mass is 44.1 g/mol, so 6.71 g of propane is equivalent to 0.152 moles. Therefore, the amount of carbon dioxide produced would be 0.456 moles (3 moles CO2 per 1 mole C3H8). At STP (standard temperature and pressure), 1 mole of any gas occupies 22.4 L of volume. Therefore, the volume of carbon dioxide produced at STP would be:
V = nRT/P = (0.456 mol) (0.0821 L·atm/mol·K) (273 K) / (1 atm) = 15.5 L
Thus, the number of liters of carbon dioxide measured at STP that could be produced from 6.71 g of propane is 15.5 L.
To learn more about propane, click here:
https://brainly.com/question/25008296
#SPJ11
PLEASE ANWER!!!! 40 POINTS
7.0 mol AgNo3 reacts with 3.0 mol Zn in a single replacement reaction. 2AgNo3 + Zn --> 2Ag + Zn(no3)2
How many moles of Zn(no3)2 form from 3.0 mol Zn?
mol Zn(NO3)2
9. The equilibrium constant expression for the reaction 2 BrF5(g) Br2(g) + 5 F2(g) is:
A. Kc = [Br2][F2]/[BrF5] D. Kc = [BrF5]2/[Br2][F2]5
B. Kc = [Br2][F2]5/[BrF5]2 E. Kc = 2[BrF5]2/[Br2]x5[F2]5
C. Kc = [Br2][F2]2/[BrF5]5
The equilibrium constant expression for the reaction 2 BrF5(g) Br2(g) + 5 F2(g) is Kc = [BrF5]2/[Br2][F2]5. The correct answer is option D.
This expression shows that the equilibrium constant is equal to the concentration of BrF5 raised to the power of 2, divided by the concentration of Br2 multiplied by the concentration of F2 raised to the power of 5.
The equilibrium constant is a measure of the extent to which the reaction proceeds towards the products at equilibrium, and it is a function of temperature. The larger the equilibrium constant, the more products are present at equilibrium. In this reaction, the concentration of the reactant BrF5 is squared, which means that it has a greater impact on the equilibrium constant than the concentrations of the products Br2 and F2.
Therefore, a decrease in the concentration of BrF5 will cause a decrease in the value of the equilibrium constant, and a shift towards the reactants. Conversely, an increase in the concentration of BrF5 will cause an increase in the value of the equilibrium constant, and a shift towards the products.
Therefore, option D is correct.
For more such questions on equilibrium constant, click on:
https://brainly.com/question/19340344
#SPJ11
State a general rule about what happens to the pH of acidic or basic solutions when they are diluted with pure water.
When acidic or basic solutions are diluted with pure water, the pH of the solution will tend to move towards 7 (neutral). In the case of acidic solutions, dilution will result in an increase in pH towards neutrality. This is because the concentration of H+ ions (which contribute to acidit) decreases as more water is added, resulting in a less acidic solution.
Conversely, for basic solutions, dilution will cause the pH to decrease towards 7. This is because as the concentration of OH- ions (which contribute to basicity) decreases, the solution becomes less basic and more neutral. Overall, dilution tends to have a neutralizing effect on the pH of both acidic and basic solutions. When acidic or basic solutions are diluted with pure water, the pH of the solution generally moves closer to neutral (pH 7). For acidic solutions, the pH will increase, while for basic solutions, the pH will decrease. This occurs because the concentration of ions responsible for acidity or basicity is reduced upon dilution.
to know more about neutralizing effect please vist :-
https://brainly.com/app/profile/72583604
#SPJ11
An exothermic reaction causes the surroundings to Group of answer choices become acidic expand. warm up. release CO2. decrease its temperature.
An exothermic reaction causes the surroundings to warm up.
It is a chemical reaction that releases heat, making the temperature of the surroundings increase. However, it does not necessarily cause the surroundings to become acidic or release CO2. The products of the reaction may vary depending on the reactants involved. Sometimes, an exothermic reaction may cause the substances involved to expand due to the increase in temperature. But again, this depends on the specific reaction and its conditions.
Learn more about exothermic reaction at
brainly.com/question/10373907
#SPJ11
A total of 1.436 F of electricity (1 F=1 mol e−) was required to electrodeposit all of the Zn and Co from a solution of ZnSO4 and CoSO4. The mixture of Zn and Co that was deposited had a mass of 43.57 g. Calculate the masses of ZnSO4 and CoSO4 present in the original solution.
There were approximately 128.94 g of ZnSO4 and 109.34 g of CoSO4 present in the original solution.
What is electroplating?Electroplating is the process of coating a metal object with a thin layer of another metal by means of electrolysis. In an electrolytic cell with a solution of a salt of the metal to be deposited, the item to be plated is made the cathode (negative electrode).
The electroplating of Zn and Co from the solution involves the transfer of electrons from the cathode to the metal ions in the solution, which results in the deposition of the metals on the cathode. The amount of electricity required for this process is proportional to the amount of metal ions present in the solution, which in turn is proportional to the mass of the metals deposited.
Let's first calculate the moles of electrons transferred in the electroplating reaction:
1.436 F × (1 mol e⁻/1 F) = 1.436 mol e⁻
Since the number of electrons transferred is the same for both Zn and Co, the ratio of the moles of Zn and Co deposited should be the same as the ratio of their atomic masses. The atomic masses of Zn and Co are 65.38 g/mol and 58.93 g/mol, respectively, so the ratio of their masses is:
65.38 g/mol ÷ 58.93 g/mol ≈ 1.11
This means that for every 1.11 moles of Zn deposited, 1 mole of Co is deposited.
Let's assume that x moles of ZnSO4 and y moles of CoSO4 were present in the original solution. Then we can set up the following equations based on the balanced electroplating reaction:
2 e⁻ + Zn²+ → Zn (s)
2 e⁻ + Co²+ → Co (s)
The total number of moles of electrons transferred in the electroplating reaction is:
1.436 mol e⁻ = 2 mol e⁻/mol Zn × x mol ZnSO4 + 2 mol e⁻/mol Co × y mol CoSO4
Simplifying and solving for y:
y = (1.436 mol e⁻ - 2 mol e⁻/mol Zn × x mol ZnSO4) / (2 mol e⁻/mol Co)
y = 0.718 mol CoSO4
Since the ratio of the moles of Zn to Co deposited is 1.11, we can calculate the moles of ZnSO4 from the moles of CoSO4:
x = (1.11 mol Zn/mol Co) × (0.718 mol CoSO4) = 0.798 mol ZnSO4
Finally, we can calculate the masses of ZnSO4 and CoSO4:
mass of ZnSO4 = 0.798 mol × 161.47 g/mol = 128.94 g
mass of CoSO4 = 0.718 mol × 152.06 g/mol = 109.34 g
To know more about cathode, visit:
https://brainly.com/question/4052514
#SPJ1
Question 20
The first major recorded episode of air pollution that produced human casualties occurred in:
a. Meuse River Valley, Belgium
b. London, England
c. Los Angeles, CA
d. Donora, PA
The first major recorded episode of air pollution that produced human casualties occurred in the Meuse River Valley, Belgium.
In 1930, a combination of industrial emissions and weather conditions led to a thick smog settling over the valley for several days, resulting in the deaths of at least 60 people and causing illness in thousands more. This event brought attention to the dangers of air pollution and led to the development of air quality regulations and monitoring systems.
the first major recorded episode of air pollution that produced human casualties occurred in Donora, Pennsylvania in 1948. Severe industrial air pollution created a deadly smog that asphyxiated 20 people and made 7,000 more sick.
Find out more about Meuse River Valley
at brainly.com/question/31556531
#SPJ11
Where each species that carries out a specific step in the mechanism originates
Each species that carries out a specific step in a mechanism originates from a specific geographical location and evolved over time through natural selection and adaptation to its environment.
The specific adaptations of a species allow it to perform a specific function in the mechanism, which contributes to the overall function of the system. As such, the origin of a species is closely tied to its role in the mechanism and its ability to carry out a specific function within the system.
Each species involved in a specific mechanism originates from its ancestral population, evolving through genetic mutations and natural selection to perform specialized functions within the mechanism. This process enables species to adapt and thrive in their respective ecological niches.
To know more about Mechanism click here .
brainly.com/question/20885658
#SPJ11
Ammonium sulfate, (NH4)2SO4, is used in fertilizer to supply nitrogen to the soil. What is the total number of atoms in the chemical formula? A) 13 B) 14 C) 15 D) 20
There are a total of 15 atoms in the chemical formula of ammonium sulfate, (NH4)2SO4. So, the correct answer is C) 15.
To find the total number of atoms in the chemical formula of ammonium sulfate, (NH₄)₂SO₄, we need to count each type of atom present in the formula.
1. There are 2 nitrogen (N) atoms in the two ammonium ions (NH₄).
2. There are 8 hydrogen (H) atoms in the two ammonium ions (2 x 4 = 8).
3. There is 1 sulfur (S) atom in the sulfate ion (SO₄).
4. There are 4 oxygen (O) atoms in the sulfate ion (SO₄).
Now, let's add up the total number of atoms: 2 (N) + 8 (H) + 1 (S) + 4 (O) = 15 atoms
So, C is the correct option.
You can learn more about ammonium sulfate at: brainly.com/question/10834028
#SPJ11
If 0.274 moles of a substance weighs 62.5 g, what is the molar mass of the substance, inunits of g/mol?A) 2.28 × 102 g/mol D) 2.17 × 102 g/molB) 1.71 × 101 g/mol E) 6.02 x 1023 g/molC) 4.38 × 10-3 g/mol
If 0.274 moles of a substance weighs 62.5 g, then the molar mass of the substance is 2.28 × 10² g/mol. Hence, option A is correct.
Generally, molecular mass of an element is defined as the sum of the masses of the elements which are present in the molecule. Molecular mass is basically obtained by multiplying the atomic mass of an element with the number of atoms in the molecule and then adding the masses of all the elements in the molecule.
Mass of substance = 62.5 g
Number of moles of substance = 0.274 moles
From the formula,
Number of moles = Given mass / Molar mass
⇒ Molar mass = Given mass / Number of moles
Substituting the values we get,
Molar mass = 62.5 g / 0.274 g = 2.28 × 10² g/mol
Hence, option A is correct.
Learn more about molecular masses from the link given below.
https://brainly.com/question/15880821
#SPJ4