question 10.10: why do the areas in between the runways now appear blue

The force exerted on the electron is 1.6*10^16 N when an electron moving along the x -axis with a velocity of v⃗ =2.50×106i^m/s enters a region of a magnetic field: b⃗ =(2.26i^ 2.26j^)mt .

Given that the angle between the magnetic field B and the velocity v is 90 degrees and that q=1.6*10^19 C, the magnetic force is given as F=qvBsin, and the required response is m=1, which is obtained as F=1.6*10^16 N.

When an electric field is applied along the Y-axis, an electron traveling down the X-axis at a constant speed (v) enters it.

Electric force on an electron is equal to Fel = keqe2/r2, which measures the strength of the force. When an electron's velocity is perpendicular to B, Fmag = qevB, the magnetic force acting on it has a maximum magnitude. information about the calculation Fel=keqe2/r2 = 9*109*(1.6*10-19)2/(0.53*10-10)2 N = 8.2*10-8 N.

For more information on force on electron kindly visit to

https://brainly.com/question/16638644

#SPJ1

The two spheres' centers of mass are moving at a speed of about 2.91 m/s before to colliding.

Kinetic energy and momentum are both conserved in an elastic collision. This demonstration simulates collisions between two dense hard spheres.

Let the mass of sphere B is m.

the initial momentum of the system:

p_initial = m * 3.00 m/s - 360 g * 3.00 m/s

Sphere A is at rest following the impact, hence the system's momentum equals:

p_final = m * v_cm, where v_cm is the velocity of the center of mass

KE_initial = [tex]1/2 * m * (3.00 m/s)^{2} + 1/2 * 360 g * (3.00 m/s)^{2}[/tex]

After the collision,

KE_final = 1/2 * m * v_cm^{2}

Since KE_initial = KE_final,

[tex]1/2 * m * (3.00 m/s)^{2} + 1/2 * 360 g * (3.00 m/s)^{2} = 1/2 * m * v_c_m^{2[/tex]}

Solving for v_cm,

[tex]v_c_m = (3.00 m/s) * sqrt((3.00 m/s)^{2} + (360 g/m)^{2}) / (3.00 m/s + sqrt((3.00 m/s)^{2} + (360 g/m)^{2}))[/tex]

v_cm ≈ 2.91 m/s

To know more about the velocity visit:

https://brainly.com/question/30775623

#SPJ1

As the capacitors are in series, the charge stored in each capacitor is the same. Therefore, the charge stored in the 15.0-μF capacitor is approximately 65.52 µC.

To determine the charge stored in the 15.0-μF capacitor when three capacitors are connected in series across a 24.0-V battery with capacitances of 5.0 µF, 10.0 µF, and 15.0 µF, follow these steps:

1. Calculate the total capacitance (C_total) for capacitors in series using the formula:
1/C_total = 1/C1 + 1/C2 + 1/C3
Where C1 = 5.0 µF, C2 = 10.0 µF, and C3 = 15.0 µF.

1/C_total = 1/5.0 + 1/10.0 + 1/15.0
1/C_total = 0.2 + 0.1 + 0.0667
1/C_total = 0.3667
Now, find C_total:
C_total = 1/0.3667 ≈ 2.73 µF

2. Calculate the charge (Q) stored in the capacitors using the formula:
Q = C_total * V
Where V = 24.0 V.

Q = 2.73 µF * 24.0 V ≈ 65.52 µC

To know more about "Capacitance" refer here:

https://brainly.com/question/28445248#

#SPJ11

We can use the equations of motion to solve this problem.

Initially, the ball is 2 m high with a vertical velocity of 5 m/s upward.

We can assume that there is no air resistance.

At the highest point of the ball's trajectory, its vertical velocity will be zero.

We can use the following equation to find the highest point:

v_f^2 = v_i^2 + 2aΔy

where

v_f is the final velocity, which is zero at the highest point

v_i is the initial velocity, which is 5 m/s upward

a is the acceleration due to gravity, which is -9.8 m/s^2 (negative because it acts downward)

Δy is the change in height, which is what we want to find

Plugging in the values, we get:

0^2 = (5 m/s)^2 + 2(-9.8 m/s^2)Δy

Solving for Δy, we get:

Δy = (5 m/s)^2 / (2*9.8 m/s^2) = 1.2755 m

Therefore, the ball reaches a height of 1.2755 m at its highest point.

To know more about vertical velocity visit link :

https://brainly.com/question/11679227

#SPJ11

The ball reaches a height of 1.2755 m at its highest point.

We can use the equations of motion to solve this problem.

Initially, the ball is 2 m high with a vertical velocity of 5 m/s upward.

We can assume that there is no air resistance.

At the highest point of the ball's trajectory, its vertical velocity will be zero.

We can use the following equation to find the highest point:

v_[tex]f^2[/tex] = v_[tex]i^2[/tex] + 2aΔy

where

v_f is the final velocity, which is zero at the highest point

v_i is the initial velocity, which is 5 m/s upward

a is the acceleration due to gravity, which is -9.8 m/[tex]s^2[/tex] (negative because it acts downward)

Δy is the change in height, which is what we want to find

Plugging in the values, we get:

[tex]0^2 = (5 m/s)^2 + 2(-9.8 m/s^2)[/tex]Δy

Solving for Δy, we get:

Δy = [tex](5 m/s)^2 / (2*9.8 m/s^2) = 1.2755 m[/tex]

Therefore, the ball reaches a height of 1.2755 m at its highest point.

To know more about vertical velocity visit link :

brainly.com/question/11679227

#SPJ4

Object B has density rho₂ such that  rho₂ = 3 rho₁. From the given options, the third option is the correct one for the density.

The density of a particular thing or object is specified as its mass per unit volume. Let's assume that object A has a mass of m and a volume of V. Therefore, its density rho₁ is given by:

rho₁ = m/V

Now, object B has the same form and proportions as physical object A, but it is three times as big as the object A. This means that the mass of object B is 3m. Since the two objects have the same shape and dimensions, they have the same volume V. Therefore, the density rho₂ of object B is given by:

rho₂ = (3m)/V

Substituting m/V from the equation for rho₁, we get:

rho₂ = 3 rho₁

Therefore, the correct answer is rho₂= 3 rho₁.

Learn more about density here:

https://brainly.com/question/28464887

#SPJ1

The general solution is w(t) = C₁e^(-6t/5) + C₂te^(-6t/5).

To find the general solution to the given differential equation, 25w'' + 60w' + 36w = 0, we will first solve the characteristic equation for the given homogeneous linear differential equation.

The characteristic equation is:
25r^2 + 60r + 36 = 0

By solving for r, we can determine the general solution. In this case, we can factor the equation:
(5r + 6)(5r + 6) = 0

Since both factors are the same, we have a repeated root:
r = -6/5

Now, we can construct the general solution using the repeated root:
w(t) = C₁e^(-6t/5) + C₂te^(-6t/5)

Learn more about differential equations at https://brainly.com/question/28099315

#SPJ11

The difference in size between a silver-108 atom and a helium nucleus is due to the fact that the atomic radius of the silver-108 atom is much larger than the diameter of the helium nucleus.

What is Nulceus?

The nucleus is positively charged because of the presence of protons, while neutrons have no charge. The number of protons in an atom's nucleus is called its atomic number and determines the element to which it belongs. The sum of the protons and neutrons in the nucleus is called the mass number.

Silver-108 has an atomic number of 47, which means it has 47 protons in its nucleus, along with 61 neutrons. The electrons of the silver atom are distributed around the nucleus in different energy levels or orbitals.

Learn more about Nulceus from the given link

https://brainly.com/question/5223117

#SPJ1

On conservation of momentum:

(a) The cart goes in the opposite direction as the man does.

(b) With a speed of 0.07 m/s, the cart proceeds in the opposite direction as the guy.

(c) the cart starts moving in the forward direction with the same velocity of 0.07 m/s.

(a) As per the conservation of momentum, the total momentum of the system is conserved. Initially, the system was at rest, but when the man starts walking towards the other end, he gains some momentum in the forward direction, which the cart has to compensate for. So, the cart moves in the opposite direction to that of the man's motion.

(b) Assume that the man moves a distance of 10 m, i.e., the length of the cart.

Therefore, the total distance covered by the man is 20 m (10 m forward and 10 m backward).

The momentum gained by the man while walking forward is (70 kg) x (1.0 m/s) = 70 kg m/s.

As the total momentum of the system is conserved, the cart gains an equal and opposite momentum of -70 kg m/s.

The mass of the cart is 1,000 kg, so its velocity can be calculated using the conservation of momentum formula:

Total initial momentum = Total final momentum

0 = (70 kg) x (1.0 m/s) + (1,000 kg) x V

V = -0.07 m/s

So, the cart moves in the opposite direction to that of the man's motion with a speed of 0.07 m/s.

(c) When the guy comes to a complete halt at the back of the automobile, he loses the momentum he got while going forward, and the cart obtains equal and opposite motion. As a result, the cart begins going ahead at the same velocity of 0.07 m/s.

Find out more on Conservation of momentum here: https://brainly.com/question/7538238

#SPJ1

The bridge increase at 70C is  7.7*[tex]10^{-11}[/tex]  m.  when Golden Gate Bridge  longer (in meters) would the bridge be for an increase of 70C.

With a diameter of little over three feet, 7,659 feet in length, and 27,572 parallel wires, each of the two major cables is composed. The Golden Gate employs the world's longest bridge cables, which at the equator could circle the globe more than three times.

To cross the Golden Gate Bridge, how long does it take? Walking each direction takes roughly 35 minutes because the bridge is 1.7 miles long.

Change of Length: ΔL= aΔT

[remember that the product of ΔL must then be multiplied by the length of the steel bridge (1.3K)]

To know more about Golden Gate Bridge visit:-

https://brainly.com/question/5314674

#SPJ1

Answer:

x = ± √(8/9) A.

Explanation:

For a simple harmonic oscillator with amplitude A and angular frequency ω, the speed at position x is given by v = ω√(A^2 - x^2).

The maximum speed occurs at the equilibrium position, where x = 0, and is given by vmax = ωA.

To determine the positions at which the speed is one-third of the maximum speed, we need to solve the equation:

v = (1/3)vmax

ω√(A^2 - x^2) = (1/3)ωA

√(A^2 - x^2) = (1/3)A

A^2 - x^2 = (1/9)A^2

8/9 A^2 = x^2

x = ± √(8/9) A

Therefore, the positions at which the speed of the simple harmonic oscillator is one-third of the maximum speed are x = ± √(8/9) A.

(a) The concentration of holes and electrons in an intrinsic sample of Si at room temperature can be computed using the intrinsic carrier concentration formula:

ni² = (Nv)(Nc)e^(-Eg/kT)

where ni is the intrinsic carrier concentration, Nv is the effective density of states in the valence band, Nc is the effective density of states in the conduction band, Eg is the band gap energy, k is the Boltzmann constant, and T is the temperature in Kelvin.

For Si at room temperature (T = 300K), Nv = 1.04x10^19 cm^-3, Nc = 2.81x10^19 cm^-3, and Eg = 1.12 eV. Substituting these values and solving for ni, we get:

ni = sqrt[(Nv)(Nc)e^(-Eg/kT)] = 1.5x10^10 cm^-3

Since Si is an intrinsic semiconductor, the concentration of electrons and holes are equal and are given by:

n = p = ni = 1.5x10^10 cm^-3

(b) The position of the Fermi level under these conditions can be determined using the relationship between the Fermi level and the carrier concentrations:

n = Ncexp[(Ef - Ec)/kT] and p = Nvexp[(Ev - Ef)/kT]

where Ef is the Fermi level energy, Ec and Ev are the energies of the conduction and valence bands, respectively.

Since n = p = ni, we can write:

ni² = NcNvexp[-Eg/kT] = Ne^(-Ef/kT)

where Ne is the total number of electrons in the conduction band.

Solving for Ef, we get:

Ef = Ec + (kT/2)ln(Nv/Nc) = Ev - (kT/2)ln(Nv/Nc) = 0.57 eV

Therefore, the position of the Fermi level in an intrinsic sample of Si at room temperature is 0.57 eV.

Learn more about intrinsic semiconductor here:

https://brainly.com/question/15184439

#SPJ11

To increase the speed of the hockey puck from v to 2v, the player must increase the distance over which he applies the same force by a factor of √2.

This is because the kinetic energy of the puck is proportional to the square of its velocity, so to double the velocity, the player must increase the kinetic energy by a factor of 2² = 4. Since work is the change in kinetic energy, the player must apply the same force over a distance that is √4 = 2 times greater in order to achieve this increase in kinetic energy, which corresponds to a velocity of 2v. Therefore, the required increase in distance is √2 times the original distance.

Learn more about speed here:https://brainly.com/question/13943409

#SPJ11

Ernesto's physician prescribes a loop diuretic, which acts directly on the Loop of Henle in the kidney. Option D.

Loop diuretics are a type of medication that act directly on the Loop of Henle, which is a section of the nephron in the kidney. The Loop of Henle is responsible for reabsorbing water and electrolytes, such as sodium and chloride, from the filtrate produced by the glomerulus of kidneys.

Loop diuretics inhibit the transport of sodium and chloride ions across the walls of the Loop of Henle, which prevents the reabsorption of these ions and leads to an increased excretion of water and electrolytes in the urine. This makes loop diuretics useful for treating conditions such as edema, congestive heart failure, and hypertension.

To learn more about kidneys, click here:

https://brainly.com/question/29992259

#SPJ11

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters is 0.0015 J, when rounded to one decimal place.

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters can be calculated using the formula for electrostatic potential energy: U = (1/4πε₀)q₁q₂/r, where q₁ and q₂ are the charges, and r is the distance between them.

In this case, U = (1/4πε₀) (3.6 x 10⁻⁶ C) (2.5 x 10⁻⁶ C) / (10 m). Calculating this yields a potential energy of 0.0015 J.

This potential energy is a result of the electric field that exists between two charges, and is due to the force of attraction or repulsion between them. This electrostatic potential energy can be used to do work, and can be converted into other forms of energy, such as kinetic energy.

Know more about potential energy here

https://brainly.com/question/24284560#

#SPJ11

Measuring current in series is essential because it ensures that the current passing through each component in the circuit is the same. In a series circuit, there is only one path for the current to flow, which means that the current measured at any point is the same throughout the entire circuit.

If you were to connect a current probe in parallel, you would create an additional path for the current to flow, which could lead to an inaccurate measurement. Connecting the probe across the resistor (opposite sides) in parallel would essentially create a short circuit, bypassing the resistor and causing a potentially dangerous situation with increased current flow, potential damage to the circuit, and an incorrect current reading.

Therefore, it's essential to measure current in series to ensure accuracy and maintain the safety of the circuit.

Learn more about current here:

https://brainly.com/question/13076734

#SPJ11

The object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

To solve this problem, we can use the formula for magnification:

m = -di/do

Where m is the magnification, di is the image distance, and do is the object distance.

We are given that the focal length of the lens, f, is 13 cm. For a diverging lens, the focal length is negative, so we can write:

f = -13 cm

We are also given that the magnification, m, is +0.80. Substituting these values into the formula above, we get:

0.80 = -di/do

Solving for di, we get:

di = -0.80do

Now we can use the lens equation to relate do and di:

1/do + 1/di = 1/f

Substituting the values we know, we get:

1/do + 1/(-0.80do) = 1/(-13 cm)

Simplifying and solving for do, we get:

do = -21.67 cm

However, we need to express our answer with the appropriate units, which are centimeters. Therefore, the object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

(Note that the negative sign indicates that the object is on the opposite side of the lens from the observer, which is consistent with the fact that we are dealing with a diverging lens)

For more information on lens and their focal length refer to https://brainly.com/question/25779311

#SPJ11

Concepts:

For resistors in series we know the following,

[tex]1. \ I_{tot.}=I_1=I_2=I_3=...\\2. V_{tot.}=V_1+V_2+V_3+... \\3. R_{eq.}=R_1+R_2+R_3+...[/tex]

For parallel resistors we know the following,

[tex]1. \ V_{tot.}=V_1=V_2=V_3=...\\2. \ I_{tot.}=I_1+I_+I_3+...\\3. \frac{1}{R_{eq.}}=\frac{1}{R_1} + \frac{1}{R_2} +\frac{1}{R_3}+...[/tex]

What is a resistor?

Resistors are used in electrical circuits. Resistors take energy and convert it into another form such as thermal energy which in turn can limit the amount of current through a wire.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#1:

We are given a circuit with series resistors.

Using the following equation to find an equivalent resistor.

[tex]\Rightarrow R_{eq.}=R_1+R_2+R_3+...[/tex]

[tex]\Longrightarrow R_{eq.}=2+2 \Longrightarrow \boxed{R_{eq.}=4 \Omega}[/tex]

#2:

We are given a circuit with parallel resistors.

Using the following equation to find an equivalent resistor.

[tex]\Rightarrow \ \frac{1} {R_{eq.}}=\frac{1}{R_1} + \frac{1}{R_2} +\frac{1}{R_3}+...[/tex]

[tex]\Longrightarrow \ \frac{1} {R_{eq.}}=\frac{1}{2} + \frac{1}{2} \Longrightarrow \ \frac{1} {R_{eq.}}=1 \Longrightarrow (\ \frac{1} {R_{eq.}})^{-1}=(1)^{-1} \Longrightarrow \boxed {R_{eq.}=1 \ \Omega}[/tex]

#3:

We are given a circuit with parallel resistors.

Using the following equation to find an equivalent resistor.

[tex]\Rightarrow \ \frac{1} {R_{eq.}}=\frac{1}{R_1} + \frac{1}{R_2} +\frac{1}{R_3}+...[/tex]

[tex]\Longrightarrow \ \frac{1} {R_{eq.}}=\frac{1}{1} + \frac{1}{1} \Longrightarrow \ \frac{1} {R_{eq.}}=2 \Longrightarrow (\ \frac{1} {R_{eq.}})^{-1}=(2)^{-1} \Longrightarrow \boxed {R_{eq.}=\frac{1}{2} \ \Omega}[/tex]

#4:

We are given a circuit with series resistors.

Using the following equation to find an equivalent resistor.

[tex]\Rightarrow R_{eq.}=R_1+R_2+R_3+...[/tex]

[tex]\Longrightarrow R_{eq.}=1+1 \Longrightarrow \boxed{R_{eq.}=2\ \Omega}[/tex]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thus, the combination with smallest equivalent resistance is option #3.

So the ratio of translational to rotational kinetic energy at the bottom is 94.3. a. [tex]KE_t = (1/2)mv^2[/tex]  b. [tex]KE_r = (1/2)Iw^2[/tex]

The conservation of energy principle. The initial potential energy is converted to both translational and rotational kinetic energy at the bottom of the incline.

The potential energy at the top of the incline is:

PEi = mgh = (1.2 kg)(9.81 [tex]m/s^2[/tex])(12.0 m)sin(33.0°) = 62.6 J

At the bottom of the incline, the translational kinetic energy and rotational kinetic energy are:

[tex]KE_t = (1/2)mv^2\\KE_r = (1/2)Iw^2[/tex]

Since the sphere is rolling without slipping, we know that the translational speed is related to the rotational speed as v = rw, and the moment of inertia is I = (2/5)[tex]mr_0^2.[/tex]

Using conservation of energy, we have:

[tex]PE_i = KE_t + KE_r\\62.6 J = (1/2)mv^2 + (1/2)(2/5)mr0^2w^2\\62.6 J = (1/2)(1.2 kg)v^2 + (1/5)(1.2 kg)(0.23 m)^2w^2\\62.6 J = 0.6v^2 + 0.006 w^2[/tex]

We can solve for the rotational speed as w = [tex]\sqrt{[(62.6 J - 0.6v^2)/0.006(0.23 m)^2].}[/tex]

The ratio of translational to rotational kinetic energy at the bottom is:

KEt/KEr = [tex](1/2)mv^2/[(1/2)(2/5)mr0^2w^2]\\\\= 5v^2/(2r_0^2w^2)\\= 5/(2 * 0.23^2) = 94.3[/tex]

Learn more about translational speed visit: brainly.com/question/29525543

#SPJ4

Hi! The direction of the magnetic field at different locations around a bar magnet and an electromagnet can be predicted using the following principles:

For a bar magnet, the magnetic field lines emerge from the North pole and enter the South pole. So, at locations near the North Pole, the magnetic field direction is away from the magnet, while near the South pole, it's towards the magnet. On the sides of the bar magnet, the magnetic field lines curve from North to South.

For an electromagnet, the magnetic field direction depends on the direction of the current flowing through the coil. You can use the right-hand rule to predict the direction of the magnetic field: point your thumb in the direction of the conventional current (positive to negative), and your fingers will curl around the coil in the direction of the magnetic field lines.

So, at different locations around an electromagnet, the magnetic field direction will follow the circular path of the coil, with the field lines emerging from the North pole and entering the South pole, similar to a bar magnet.

https://brainly.com/question/31485859

#SPJ11

The electric field midway between two equal but opposite point charges is 936N/C , and the distance between the charges is 17.0cm. Each point charge has a magnitude of[tex]2.88 × 10^-7 C.[/tex]

The electric field at the midpoint between two equal but opposite point charges is given by the formula[tex]E = kq/r^2,[/tex]  where k is Coulomb's constant, q is the magnitude of the charge, and r is the distance between the charges. Since the charges are equal and opposite, the net electric field at the midpoint is the difference between the electric fields due to each charge, which gives:

[tex]E = kq/(0.5r)^2 - kq/(0.5r)^2 = 2kq/(0.5r)^2[/tex]

Solving for q, we get:

[tex]q = Er^2/(2k) = (936 N/C)(0.17 m)^2/(2 * 9 × 10^9 N m^2/C^2) = 2.88 × 10^-7 C[/tex]

Therefore, each point charge has a magnitude of 2.88 × 10^-7 C.

learn more about electric field  here:

https://brainly.com/question/15800304

#SPJ11

The work done by the steam during this process is 62.55 kJ.

To calculate the work done by the steam during this process, we need to use the formula:
W = P(V2 - V1)
where W is the work done, P is the constant pressure, and V2 and V1 are the final and initial volumes of the system, respectively.

To find V1, we need to use the steam tables to determine the specific volume of saturated water vapor at 150 kPa and 100°C, which is 1.694 m³/kg.

To find V2, we need to use the steam tables again to determine the specific volume of saturated water vapor at 200°C and 150 kPa, which is 2.111 m³/kg.

Substituting these values into the formula, we get:
W = 150 kPa (2.111 m³/kg - 1.694 m³/kg)
W = 62.55 kJ

Learn more about work:

https://brainly.com/question/24900258

#SPJ11

using CBC with IV=010, the plain text 111110001100 would be encrypted as 1101 0010 1010.

Using CBC (Cipher Block Chaining) mode with IV (Initialization Vector) = 010, we can encrypt the plaintext message 111110001100 as follows:

- Divide the plaintext into 3 blocks of 4 bits each: 1111 1000 1100
- XOR the first block with the IV: 1111 ⊕ 010 = 1101
- Encrypt the XOR result with a block cipher (e.g. AES): assume we get the ciphertext block 1010
- XOR the ciphertext block with the second plaintext block: 1010 ⊕ 1000 = 0010
- Encrypt the XOR result with the same block cipher: assume we get the ciphertext block 0110
- XOR the second ciphertext block with the third plaintext block: 0110 ⊕ 1100 = 1010
- The final ciphertext is the concatenation of the three ciphertext blocks: 1101 0010 1010

Therefore, using CBC with IV=010, the plaintext 111110001100 would be encrypted as 1101 0010 1010.

To learn more about CBC https://brainly.com/question/30859463

#SPJ11

The value of inductance is approximately 9.47×10^-7 H.

To find the value of inductance, we need to use the formula for resonance frequency:
f = 1 / (2π√(LC))
where f is the resonance frequency, L is the inductance, and C is the capacitance.

We know the value of capacitance (C = 4.2×10−13f), so we can rearrange the formula to solve for inductance:
L = 1 / (4π^2f^2C)

Substituting the given value of capacitance and assuming a resonance frequency of 1 MHz (10^6 Hz) for simplicity, we get:
L = 1 / (4π^2(10^6)^2(4.2×10−13)) = 9.47×10^-7 H

Therefore, inductance is  9.47×10^-7 H.

To learn more about "inductance", visit: https://brainly.com/question/7138348

#SPJ11

The probability of waiting in a queue decreases by 0.0001638 when a 5th toll booth is opened.

ρ = λ/(c*μ)

ρ = (600 veh/h) / (4 * (1/12) veh/s) = 1

[tex]P_w = (1 - p) / (1 - p^(c+1))[/tex]

Plugging in the values, we get:

[tex]P_w = (1 - 1) / (1 - 1^5) = 0[/tex]

let's consider the toll road with 5 toll booths. The traffic intensity is:

ρ = (600 veh/h) / (5 * (1/12) veh/s) = 0.8

The probability of waiting in a queue is:

[tex]P_w = (1 - p) / (1 - p^(c+1))[/tex] = [tex](1 - 0.8) / (1 - 0.8^6) = 0.0001638[/tex]

Therefore, the positive difference between the two probabilities is:

0.0001638 - 0 = 0.0001638

The study of random occurrences or phenomena falls under the category of probability, which is a branch of mathematics.  It is concerned with the likelihood or chance of a specific outcome occurring in a given situation. Probability is measured on a scale from 0 to 1, with 0 indicating that an event is impossible, and 1 indicating that an event is certain.

In probability theory, an event is a set of possible outcomes, and a probability measure assigns a numerical value to each event that reflects the likelihood of its occurrence. Probability is used in a variety of fields, including science, engineering, finance, and statistics, to make predictions and make informed decisions based on uncertain information.

To learn more about Probability visit here:

brainly.com/question/11234923

#SPJ4

the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

To find the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º, we can use the equation:

d*sinθ = mλ

Where d is the distance between the two slits, θ is the angle of the first minimum (41.0º), m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the violet light (405 nm = 405 x 10^-9 m).

Rearranging the equation to solve for d, we get:

d = mλ/sinθ

Plugging in the values, we get:

d = (1 * 405 x 10^-9 m) / sin(41.0º)

Using a calculator, we can evaluate sin(41.0º) to be 0.6561, so:

d = (1 * 405 x 10^-9 m) / 0.6561

d ≈ 6.18 x 10^-7 m

Therefore, the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

Learn more about the distance at  brainly.com/question/15172156

#SPJ11

To solve this problem, we can use the ideal gas law equation: PV = n RT
Where:
P = pressure
V = volume
n = number of moles
R = gas constant (0.08206 L ·atm/mol ·K)
T = temperature

We are given P = 4.15 atm, V = 55.31 L, and T = 393 K.

First, we need to convert the temperature to Kelvin by adding 273.15 K.
So, T = 393 K + 273.15 K = 666.15 K.

Now, we can plug in these values into the ideal gas law equation:
(4.15 atm) x (55.31 L) = n x (0.08206 L·atm/mol·K) x (666.15 K)

Simplifying the equation, we get:

n = (4.15 atm x 55.31 L) / (0.08206 L·atm/mol·K x 666.15 K)
n = 2.02 moles

Therefore, there are 2.02 moles of gas in the sample.

To know more about ideal gas law:

https://brainly.com/question/30458409

#SPJ11

The analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and m2[tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To write an analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], follow these steps:

Step 1: Understand the concept of linear momentum. Linear momentum (p) is defined as the product of an object's mass (m) and its velocity (v). Mathematically, it is expressed as [tex]p=mv[/tex].

Step 2: Identify the linear momentum of each car. For car 1, with mass [tex]m_1[/tex] and velocity [tex]v_1[/tex], the linear momentum is [tex]p_1=m_1v_1[/tex]. Similarly, for car 2, with mass [tex]m_2[/tex] and velocity [tex]v_2[/tex], the linear momentum is [tex]p_2=m_2v_2[/tex].

Step 3: Calculate the total linear momentum of the system. To find the total linear momentum, add the linear momentum of both cars: [tex]P_{total} = p_1 + p_2[/tex].

Step 4: Substitute the expressions for [tex]p_1[/tex] and [tex]p_2[/tex] from Step 2 into the equation from Step 3. The result is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

In conclusion, the analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is  [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To know more about linear momentum refer here:

https://brainly.com/question/31138302#

#SPJ11

The bright interference fringes on the screen 5 meters away from the slits are approximately 0.013755 meters, or 13.755 mm, apart.

To find the distance between the bright interference fringes on a screen 5 meters away from the slits, you'll need to use the double-slit interference formula:

x = (λL) / d

where x is the distance between adjacent bright fringes, λ is the wavelength of the laser beam (632.4 nm), L is the distance from the slits to the screen (5 m), and d is the distance between the slits (0.230 mm).

Step 1: Convert the given measurements to meters:
λ = 632.4 nm * (1 m / 1,000,000,000 nm) = 6.324 x 10^-7 m
d = 0.230 mm * (1 m / 1,000 mm) = 2.30 x 10^-4 m

Step 2: Substitute the values into the formula:
x = (6.324 x 10^-7 m * 5 m) / (2.30 x 10^-4 m)

Step 3: Solve for x:
x ≈ 0.013755 m

So, the bright interference fringes on the screen 5 meters away from the slits are approximately 0.013755 meters, or 13.755 mm, apart.

For more information on incidental beam and slits refer to https://brainly.com/question/19167100

#SPJ11

The word that describes the transfer of potential energy into kinetic energy is "work". Work is a fundamental concept in physics that describes the transfer of energy from one object to another as a result of a force acting over a distance.

When work is done on an object, energy is transferred to that object, and the object gains kinetic energy. The amount of work done on an object is equal to the force applied to the object multiplied by the distance over which the force is applied.

In the context of an energy lab, the transfer of potential energy into kinetic energy can be observed in many different systems. For example, a simple pendulum consists of a mass suspended from a fixed point by a string.

When the mass is raised to a certain height, it gains potential energy due to its position relative to the ground. When the mass is released, it begins to swing back and forth, and its potential energy is gradually converted into kinetic energy as it moves faster and faster.

The transfer of energy from potential to kinetic is a key concept in understanding many different systems in physics and engineering, and the word "work" is used to describe this transfer in a concise and accurate way.

Know more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

Answer:

1485 TJ

Explanation:

Given that

m = (16.5*10^-3) kg

c = 3*10^8 m/s

E = mc^2

E = (16.5*10^-3 kg) * (3*10^8 m/s)^2

E = 1.485*10^15 J

To express in Terajoules

E = (1.485*10^15)/(1*10^12)

E = 1485 TJ