Answer:
.
Explanation:
Good day please help me thank you
Answer:
D Transportation it makes sence if it doesn't just re read it
In water acids form ___.
A. Hydrogen gas
B. Hydrogen ions
C. Hydrogen atoms
D. Hydroxide ions
Answer:
Hydrogen ions
Explanation: acids will produce hydrogen ions, I asked my teacher. Please tell me if we are wrong.
What is the name of the following chemical compound?
Answer:
Lead(IV) iodide
Explanation:
Answer:
Plasmid #50548
Explanation:
Arrange the following elements in order from lowest to highest first ionization energy : AI , Ar, Cs, Na .
Answer:francium
The first ionization energy varies in a predictable way across the periodic table. The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.
Explanation:
The least measure of the energy needed to remove the loosely bound electron of an atom or a molecule is called ionization energy.
The correct order from lowest to highest first ionization energy is:
CsNaAlArThis can be explained as:
(Cs) Caesium will have the lowest energy because in the periodic table it comes in the same group as (Na) sodium. In the group, from top to bottom the ionization energy decreases.(Al) aluminium and (Ar) argon lies in the same period.In a period from left to right the ionization energy increases.Therefore, Cesium will have the least ionization energy as compared to sodium, aluminium and argon.
To know more about ionization energy follow the link:
https://brainly.com/question/2571722
3)
This polar bear lives where it is very cold. Its skin is black and that helps absorb heat. The polar bear also has thick
layers of fat called blubber. What is this blubber used for?
A)
It helps the polar bear swim in the ocean.
B)
It insulates and keeps the polar bear warm.
Females use the fat to feed the baby polar bears.
D)
Only males have fat and it is used to attract a mate.
Answer:
B
Explanation:
The blubber is so thick acts as installation
Answer:
I think the answer is B.
Which is an example of an object increasing its kinetic energy
Question 3 options:
an airplane after landing on a level runway.
a rocket before launch.
a train stopped at the station.
a mouse running faster after spotting a cat.
Answer:
The answer to this question is the A choice. A rocket before launch.
Explanation:
In the definition of kinetic energy, it says: In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes.
Identify the charges = Mg2+ F1
Answer:
its called drop and swap
Explanation:
Can a substance be a Lewis acid without being a Bronsted-Lowry acid?
Please argue on it
Answer:
Yes. Since for a substance to be a Bronsted-Lowry acid they have to be able to donate protons, and to be a Lewis acid a substance would have to accept electrons, there are substances which cannot donate protons but can accept electrons.
Explanation:
Hope this helped!
if freshwater is added to a region, what happens to seawater density and salinity?
Answer:
The density and salinity goes down.
Explanation:
Salt water is denser than pure water. As fresh water is added to salt water the concentration of salt goes down. Since salinity is the amount of salt in the water that would go down with the concentration. This would also mean that the density goes down since there is less salt per unit of volume which makes it so that there is less mass per unit of volume. The formula for density is d=m/v so as the mass goes down per unit of volume so does the density.
Let me know if anything is unclear in the comments and we can try to work through it.
Which pair has identical electron configurations?
S2- and CI
K+ and CI1-
S and Ar
Cl1- and K
Identical electron configurations : K⁺ and Cl⁻
Further explanationIn an atom, there are levels of energy in the shell and sub-shell
This energy level is expressed in the form of electron configurations.
Charging electrons in the sub-shell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
S²⁻ and CIS²⁻ : [Ne] 3s²3p⁶
Cl : [Ne] 3s²3p⁵
K⁺ and CI⁻K⁺ : 1s² 2s² 2p⁶ 3s² 3p⁶
Cl⁻ : 1s² 2s² 2p⁶ 3s²3p⁶
S and ArS :[Ne] 3s²3p⁴
Ar : [Ne] 3s²3p⁶
Cl⁻ and KCl⁻ : 1s² 2s² 2p⁶ 3s²3p⁶
K : 1s² 2s² 2p⁶ 3s² 3p⁶4s¹
Which choice confirms that one air mass is being replaced by another air mass in a given area?
A. increase in wind
B. high air pressure
C. high air temperature
D. it is impossible to tell.
Answer:
Answer is A
Explanation:
Increase in wind
6) Define Hydrogen bonds
A. A force created by differences in electronegativity and the small size of the hydrogen atom
make them especially strong.
B. A force created by similarities in electronegativity and the small size of the hydrogen atom
make them especially strong,
C. Forces created by temporary dipoles that result from the movement of electrons in non-
polar molecules.
D. A force created by differences in electronegativity and the large size of the hydrogen atom
make them especially strong,
E. The force between polar molecules when the opposite partial charges of a molecule exert a
force on each other
Answer:
A hydrogen bond is an intermolecular force (IMF) that forms a special type of dipole-dipole attraction when a hydrogen atom bonded to a strongly electronegative atom exists in the vicinity of another electronegative atom with a lone pair of electrons. Intermolecular forces (IMFs) occur between molecules. Other examples include ordinary dipole-dipole interactions and dispersion forces. Hydrogen bonds are are generally stronger than ordinary dipole-dipole and dispersion forces, but weaker than true covalent and ionic bonds.
Explanation:
I dont have heat i have
elecromagnetic,
gravitacianal,
nucler and mechanical which one is it
Answer:
Your answer would be mechanical.
Explanation:
Hope you do good BRAINLYISETTT
1. Which pair of atoms will share electrons when a bond is formed between them? Explain why.
A. K and Cl B. Li and I C. Br and Cl D. Ba and I
Answer:
C. Br and Cl
Explanation:
When Br and Cl combines they share electrons between them to form a type of bond called covalent bond.
The sharing of electrons between two atomic species is covalent bond. It usually occurs between two atoms with a low electronegativity difference among them. Br and Cl have low electronegativity difference. Also, the bond forms between non-metalsOnly Br and Cl pair are the non-metals from the given choices.Taking into account the definition of ionic and covalent bonds, the pair of atoms Br and Cl will share electrons when a bond is formed between them.
Ionic bondAn ionic bond is a type of chemical bond that occurs when one atom gives up an electron to the other, in order for both to achieve electronic stability.
This union normally occurs between metal and nonmetal elements with different electronegativity, which means that the elements have different capacity to attract electrons.
In other words, an ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions. Usually, the metal gives up its electrons forming a cation to the nonmetal element, which forms an anion.
Covalent bondOn the other side, the covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule.
Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
This caseIn this case, considering that K, Li and Ba are metallic atoms and Cl, I and Br are non-metallic atoms, the pair of atoms Br and Cl will share electrons when a bond is formed between them.
Learn more:
brainly.com/question/5394701?referrer=searchResultsbrainly.com/question/12144907?referrer=searchResultsbrainly.com/question/14614895?referrer=searchResults brainly.com/question/24755818?referrer=searchResults brainly.com/question/24776745?referrer=searchResultsElectromagnetic radiation at its maximum wavelength is _____.
A. Radio waves
B. Infrared
C. X rays
D. None of the above
Answer:
Option A) Radio waves.
Explanation:
Have a great day.
balancing equations help!!
Which part of the planet receives the most solar radiation?
A. oceans
B. Polar regions
C. Equator
Pls help me!!
Answer:
C
Explanation:
the sun's rays strike the earth's surface mostly directly at the equator
if u know that answer i will mark has brainliest
Answer:
The clear liquid is less dense than the black liquid, which is why it floats on top. If the volume were different, you would visually see more clear liquid than black and vice versa.
The clear liquid is less dense than the black liquid
Answer:
A. The clear liquid is less dense than the black liquid
Explanation:
Since the clear liquid since on top of the black one it's density is less. Whatever liquid has a higher density will sink to the bottom of the flask.
Please help I will mark brainy
Answer:
the answer is c I took the test
39 which statement about the process of dissolving is TRUE
A. Dissolving releases energy in the form of heat.
B. Solvent can be dissolved faster when stirring is applied.
C. Applying heat often speeds up the process of dissolving particles.
D. Once a solute, such as salt crystal is dissolved in a solvent such as
water, it can never return to its original crystal state.
According to the concept of solubility,applying heat often speeds up the process of dissolving particles.
What is solubility?Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/9098308
#SPJ2
Jones Soda contains 33g added sugar (C6H12O6) in a 355 ml bottle, while Sierra Mist contains 62g added sugar in a 591 ml bottle. Which beverage is more concentrated (has a higher molarity) for sugar?
Sierra Mist
Jones Soda
C6H12O6 molar mass: 180.15768 g
solute: sugar
molarity = moles of solute / liters of solution
Jones Soda:
33 g / 180.15768 g = 0.18 moles C6H12O6
M = 0.18 g / 0.355 L
M = 0.52
Sierra Mist:
62 g / 180.15768 g = 0.34 moles C6H12O6
M = 0.34 g / 0.591 L
M = 0.58
Sienna Mist has a higher molarity and is more concentrated.
The mechanical processes that breaks rocks physically into pieces
Explanation:
Weathering is the physical and chemical breaking of rocks into smaller pieces.a compared of magnesium nitric contains 72% of magnesium and 28% of nitrogen. what is the empirical formula of magnesium nitric.
and the answer is Mg 3 N 2
how to do the solution.
The empirical formula is the smallest comparison of atoms of compound =mole ratio of the components
The principle of determining empirical formula
• Determine the mass ratio of the constituent elements of the compound.
• Determine the mole ratio by dividing the percentage by the atomic mass
The empirical formula :
mol ratio Mg : N ⇒
[tex]\tt =\dfrac{72}{24~g/mol}\div \dfrac{28}{14~g/mol}\\\\=3\div 2\rightarrow Mg_3N_2[/tex]
What is the volume of 80.0 g of ether if the density is 0.70 g/ml
When a piece of paper with words on it is placed behind a clear jar of water the letters seem to change size. Some appear larger, and others appear smaller. Why does this happen? What is light doing to make the letters appear differently?
Answer:
because of the process of refraction of light.
Explanation:
Note, the term refraction refers to the process which results in the bending of light as it passes through a medium. This bending of light can make objects become magnified (or larger), or even smaller.
In this scenario, as the light passes slowly through water it affects how we perceive the objects (the words on the paper) behind the jar (more likely a glass jar). In other words, the light combined with the water refracts (changes direction of) the lights our eyes can see, making the letters seem to change size.
How many moles of Mg are present in 62.23 grams of Mg? (Show your calculations for full credit.)
How are Earth's continents related?
Please help due at 11:45!
Answer fast please What system is the stomach part of
A. Circulatory
B. Respiratory
C. Skeletal
D. Digestive
Answer:
the answer is D
Explanation:
i just took the test
How might water high specific heat capacity affect energy distribution and temperature on earth
Answer:
Water can hold a lot of heat inside it and as the climate starts getting cold, the water releases the heat which heats up the climate
Due to the fact that water has a high heat capacity, its temperature has a very limited range, which causes the coastal areas close to having a similar small daily and seasonal temperature range.
What is specific heat capacity?"When the temperature of a material rises 1 K (or 1 °C), the amount of heat (J) absorbed per unit mass (kg)".
When the weather begins to grow chilly, water releases the heat it has stored inside, warming the environment.
High specific heat of the water makes it temperature resistant, and it helps the earth to maintain its temperature and helps organisms to maintain their functions at a constant temperature of the earth.
Thus, the normal temperature is necessary for maintaining the temperature of the earth and the water bodies maintain the temperature of the earth.
To learn more about specific heat capacity, refer to the link:
https://brainly.com/question/13845112
#SPJ2
Mesohippus is the smallest skeleton: skull has a low sloped forehead, legs have three toes. Merychippus is the next largest skeleton, lower jaw of the skull is larger and forehead is higher, the leg has three toes with the toes on the side higher than the center toe. Pliohippus skeleton is larger, legs and neck are longer, the jaw on the skull is much larger and the forehead has the greatest slope of the four skeletons shown, the legs have only a center toe that resembles a hoof. Equus is the largest skeleton with the longest legs, no toes and a hoof.
Paleontologists have discovered several ancestors of the modern horse.
Based on the skeleton, the skull, and the leg bones, which fossil is the oldest?
Which fossil is most like a modern horse?
Answer:
1) Mesohippus
2) Equus
Explanation:
just did it on e2020
Answer:
Based on the skeleton, the skull, and the leg bones, which fossil is the oldest?
✔ Mesohippus
Which fossil is most like a modern horse?
✔ Equus