Answer: Ethernet EUI-48 addresses are 48 bits long, which equates to 6 bytes. These addresses are unique identifiers assigned to network devices and are used for communication on the Ethernet network.
Explanation: Ethernet EUI-48 addresses, also known as MAC addresses, are 48 bits long. These addresses are usually represented in hexadecimal format, which means that they consist of 12 characters (each character representing 4 bits). EUI-48 addresses are unique identifiers for network devices, allowing them to communicate with each other on an Ethernet network.
#SPJ11
How much asphalt should be in front of the screed being mixed by the augers?
The quantity of asphalt that has to be in front of the screed before it is mixed by the augers varies based on the kind of paving machinery being used and the thickness of the asphalt layer being laid.
Typically, there should be enough asphalt in front of the screed to fill the auger chamber and provide a steady, even flow of asphalt. This guarantees that the asphalt is fully and uniformly mixed before being applied to the ground. The precise quantity of asphalt placed in front of the screed also aids in preventing segregation and achieving the necessary compaction levels. To keep the asphalt layer at the proper thickness and uniformity, the paver should keep an eye on how much asphalt is in front of the screed and modify the flow as necessary. A smooth, long-lasting, and high-quality asphalt surface may be achieved by carefully controlling the amount of asphalt in front of the screen.
learn more about asphalt layer here:
https://brainly.com/question/30428321
#SPJ11
Where should you stick a thermometer in a truck?
A thermometer should be stuck in the asphalt at the center of the truck bed to get an accurate temperature reading.
Knowing the asphalt's temperature is crucial while transporting it in a truck to guarantee adequate compaction and adherence to requirements. A thermometer is often used to gauge the asphalt's temperature. Since the asphalt temperature will be most constant in this area, the thermometer should be placed in the middle of the truck bed. To guarantee an accurate reading, put the thermometer at least three inches deep. It's crucial to constantly check the asphalt's temperature while it's being transported to make sure the temperature is within the acceptable range and the asphalt is still usable.
learn more about asphalt here:
https://brainly.com/question/29589497
#SPJ11
(300-21) Electrical installations in hollow spaces, vertical shafts, and ventilation or air handling ducts shall be so made that the possible spread of fire or products of combustion will not be ______.
Electrical installations that are located in hollow spaces, vertical shafts, and ventilation or air handling ducts are required to be designed and installed in such a way that they do not contribute to the spread of fire or products of combustion. This is particularly important because these spaces can act as a conduit for the spread of fire, smoke, and toxic gases throughout a building.
To prevent the spread of fire or products of combustion, electrical installations must be protected with fire-resistant materials or be located in fire-rated enclosures. The materials used for protection must be capable of resisting the effects of fire and must not release harmful gases or smoke when exposed to fire. Additionally, all wiring must be installed in a way that avoids any contact with combustible materials and must be adequately supported to prevent sagging or deformation.
Learn more about Electrical installations here: brainly.com/question/2460961
#SPJ11
To prevent or discourage refrigerant theft, install ______________ on a condensing unit's service valves.
To prevent or discourage refrigerant theft, it is essential to install locking refrigerant caps on a condensing unit's service valves.
The caps serve as an effective security measure to protect your system and the environment.
Here's a step-by-step explanation on how locking refrigerant caps help prevent refrigerant theft:
Physical barrier:
Locking refrigerant caps act as a physical barrier, making it difficult for unauthorized individuals to access the service valves on your condensing unit.
This deters potential thieves from attempting to steal the refrigerant.
Key access:
Locking caps require a unique key to open them, ensuring that only authorized personnel can access the refrigerant. This further discourages theft, as unauthorized individuals won't be able to remove the caps without the specific key.
Tamper-evident features:
Many locking refrigerant caps come with tamper-evident features, making it easy to identify if someone has tried to tamper with or remove the caps.
This can help you take necessary action if any unauthorized attempts are made.
Compliance with regulations:
Installing locking refrigerant caps on your condensing unit's service valves ensures compliance with certain regulations aimed at preventing refrigerant theft and reducing environmental impact.
This can help you avoid fines and other consequences.
To prevent or discourage refrigerant theft, it is crucial to install locking refrigerant caps on a condensing unit's service valves.
The caps provide a physical barrier, require key access, and often have tamper-evident features, ensuring the security of your refrigerant and compliance with relevant regulations.
For similar questions on Service Value
https://brainly.com/question/30165382
#SPJ11
What information is maintained in the CEF adjacency table?
The CEF (Cisco Express Forwarding) adjacency table maintains information about the next-hop router's Layer 2 (L2) addresses for each prefix in the CEF forwarding table.
In other words, the adjacency table is a mapping table that associates the L2 address of the next-hop router with the destination prefix in the CEF forwarding table. When a packet needs to be forwarded to a destination address, the router looks up the prefix in the CEF table and then checks the adjacency table to determine the L2 address of the next-hop router for that prefix.
The adjacency table is important for optimizing packet forwarding performance, as it enables the router to quickly identify the L2 address of the next-hop router without needing to perform additional L2 address resolution procedures such as ARP (Address Resolution Protocol) for each packet.
"I think this visualization tells me this..."
* Something is more popular than something else
* Something is more important than something else
* Something has become more or less searched over time
"... but I'm not sure because..."
* I don't know exactly how the data was collected
* This might tell me people searched for green more than red, but it doesn't tell me why they do that or that green is a better color
* We need more data!
Based on your question and the terms provided, it seems that you are interpreting a visualization that shows a comparison between two or more items or trends. You think the visualization is telling you that something is more popular, important, or has changed in terms of searches over time.
However, you are unsure because of certain limitations or missing information in the data.
To address your concerns:
1. It's important to understand how the data was collected for the visualization. This will help you determine if the data source is reliable and if the findings can be generalized or are limited in scope.
2. The visualization might show that people searched for green more than red, but it doesn't explain why this occurred or if green is objectively better than red. To understand this further, additional research or data would be necessary to explore the underlying reasons for the observed trend.
3. If you feel that the current data is insufficient to make a definitive conclusion, it would be beneficial to seek more data or further studies to support or refute the observed trends in the visualization.
In summary, when interpreting visualizations, it's crucial to consider the data source, the underlying reasons for observed trends, and whether additional data is needed for a more comprehensive understanding.
To learn more about Additional data - brainly.com/question/13216230
#SPJ11
What is the difference between an instance member variable and a static member variable?
An instance member variable is a variable that belongs to a specific instance of a class, meaning that each instance of the class will have its own copy of the variable. On the other hand, a static member variable is a variable that belongs to the class itself, rather than to any particular instance of the class.
This means that there is only one copy of the static member variable, regardless of how many instances of the class exist. Static member variables are useful for storing data that should be shared across all instances of the class.The main difference between an instance member variable and a static member variable lies in their scope and usage. An instance member variable is specific to each object of a class, whereas a static member variable is shared among all objects of a class. Instance variables are initialized when a new object is created, while static variables are initialized when the class is loaded into memory.
Learn more about regardless here
https://brainly.in/question/4238039
#SPJ11
2. MAC address stands for _____ address?A. Media access controlB. Message authentication checkC. Maximum allowable costD. Memory access controller
A. MAC address stands for Media access control address.
The "Media Access Control" address is referred to as a MAC address. A network interface controller (NIC) of a device, such as a computer or a smartphone, is given this special identification. The OSI model's data link layer uses the MAC address for communication and to uniquely identify a particular device on a network. A 48-bit address known as a MAC is commonly expressed as 00:1A:2B:3C:4D:5E, which is composed of six hexadecimal integers separated by colons. The MAC address's initial 24 bits identify the NIC's maker, and the manufacturer also assigns the MAC address' last 24 bits, which uniquely identify the NIC. In order to allow communication between devices on a network, the MAC address is utilized in conjunction with the IP address. The MAC address is fixed to a specific device, but the IP address is dynamic.
learn more about MAC address here:
https://brainly.com/question/30464521
#SPJ11
In order to predict whether a star will eventually fuse oxygen into a heavier element, what do you need to know about the star?
In order to predict whether a star will eventually fuse oxygen into a heavier element, you need to know the mass of star and its stage of evolution.
To predict whether a star will eventually fuse oxygen into a heavier element, you need to know the mass of the star and its stage of evolution. Stars with a mass greater than about 1.5 times that of the sun are capable of fusing oxygen into heavier elements, but the conditions for this to occur depend on the star's stage of evolution. For example, if a star has exhausted the fuel in its core and begins to fuse helium in a shell surrounding the core, it may eventually reach a point where it can fuse oxygen into heavier elements. However, if a star does not have enough mass or is not in the right stage of evolution, it may never fuse oxygen into heavier elements.
Learn more about mass of star here
https://brainly.com/question/25324541?referrer=searchResults
#SPJ11
For the PLC counter to reset, the counter reset rung musta. be trueB. Be falsec. Be either true or false, depending on the manufacturer.d. Undergo a true-to-false transition
For the PLC counter to reset, the counter reset rung must undergo a true-to-false transition. This means that the rung must change from a true state to a false state in order to trigger the reset of the counter.
Option D is correct
For such more question on trigger
https://brainly.com/question/29576633
#SPJ11
5220-1 - To hold an airplane in level flight at airspeeds from very slow to very fast, a pilot must coordinate thrust and:- angle of incidence-gross weight-angle of attack
To hold an airplane in level flight at airspeeds from very slow to very fast, a pilot must coordinate thrust and angle of attack. Option c is answer.
Thrust is the force produced by the airplane's engines or propellers, and it is used to overcome drag and maintain or change the airplane's airspeed. The angle of attack is the angle between the chord line of the wing and the relative wind, and it determines the amount of lift produced by the wing. By adjusting the thrust and angle of attack, a pilot can maintain a desired airspeed and altitude, and hold the airplane in level flight.
It is important to note that other factors such as weight, center of gravity, and atmospheric conditions can also affect the airplane's performance and the pilot must take them into consideration while coordinating thrust and angle of attack to maintain level flight at various airspeeds.
Option c is answer.
You can learn more about angle of attack at
https://brainly.com/question/30746770
#SPJ11
When compared to air, the transmission of ultrasonic waves through a solid material is ___________.a) The sameb) More effectivec) Less effectived) none of the above
When compared to air, the transmission of ultrasonic waves through a solid material is b) more effective.
When ultrasonic waves propagate through a solid material, they encounter fewer obstacles and disturbances than when they propagate through air. As a result, the transmission of ultrasonic waves through a solid material is more effective than through air. The solid material provides a denser and more uniform medium for the ultrasonic waves to travel through, which results in less energy loss and better propagation of the waves.
This makes ultrasonic testing techniques highly effective for detecting flaws or defects in solid materials, such as metals, plastics, and composites. Ultrasonic waves can be used to detect cracks, voids, inclusions, and other types of flaws in solid materials, making it a valuable tool in non-destructive testing and evaluation.
Option b is answer.
You can learn more about ultrasonic waves at
https://brainly.com/question/11897926
#SPJ11
Given the following code segment, how can you best describe its behavior?
result ← 0
FOR EACH n IN list
{
if (n MOD 2 = 0)
{
result ← result + n
}
}
DISPLAY result
This code displays the count of even numbers in list
This code displays the sum of the even numbers in list
This code displays the sum of the numbers at the even indices of list
This code results in an error
The behavior of this code is to calculate the sum of the even numbers in the given list.
Explanation:
1. The "result" is initialized to 0.
2. The code iterates through each element "n" in the "list" using the FOR EACH loop.
3. Inside the loop, there is a conditional statement checking if "n" is an even number using "n MOD 2 = 0".
4. If the condition is true (i.e., "n" is even), the "result" is updated by adding the even number "n" to the current "result".
5. After the loop finishes, the final "result" is displayed, which represents the sum of all even numbers in the "list".
Therefore, the correct answer is: "This code displays the sum of the even numbers in list."
To know more about code segments, follow the link:
brainly.com/question/30614706
#SPJ11
This code segment displays the sum of the even numbers in the list.
It initializes a variable called "result" to 0, then loops through each element "n" in the list. If "n" is even (determined by the "n MOD 2 = 0" condition), it adds "n" to the "result" variable.
Finally, it displays the value of "result", which is the sum of all the even numbers in the list.
Learn more about even numbers: https://brainly.com/question/16953022
#SPJ11
The counter file for SLC 500 controllersA. C2B. C3C. C4D. C5
The counter file for SLC 500 controllers is D) C5.
The SLC 500 is a programmable logic controller (PLC) system manufactured by Allen-Bradley, a subsidiary of Rockwell Automation. The SLC 500 is a modular system that includes a range of CPU modules, I/O modules, communication modules, and other components that can be configured to meet the needs of different industrial automation applications.
The SLC 500 system is designed for use in a wide range of industrial control and automation applications, such as manufacturing, material handling, and process control. It is known for its reliability, flexibility, and ease of use, making it a popular choice for many industrial automation professionals.
So the correct answer is D) C5.
Learn more about SLC 500: https://brainly.com/question/15176182
#SPJ11
What types of addresses make up the majority of addresses within the /8 block IPv4 bit space?
The /8 block IPv4 bit space includes a total of 16,777,216 addresses. The majority of addresses within this block are typically used for large-scale networks ,
such as government, education, and research institutions. These addresses are known as Class A addresses and are identified by the first octet of the address being between 1 and 126. Class A addresses provide a very large address space and are often used by organizations that require a large number of unique addresses.
In the /8 block IPv4 bit space, the majority of addresses are known as "Class A" addresses. Class A addresses have the following characteristics:
1. The first 8 bits (1 byte) are used for the network portion of the address, and the remaining 24 bits (3 bytes) are used for the host portion of the address. 2. The first bit of a Class A address is always set to 0, which allows for a range of addresses from 0.0.0.0 to 127.255.255.255.
These Class A addresses make up the majority of addresses within the /8 block IPv4 bit space.
Learn more about network click here
brainly.com/question/1427678
#SPJ11
b) Explain how an isometric scale is used to draw an isometric drawing.
What is the disadvantage of an overloaded = operator returning void?
The disadvantage of an overloaded = operator returning void is that it does not allow for chaining of assignments. This means that if multiple assignments need to be made in a single statement, each assignment would need to be written separately, which can be time-consuming and tedious.
Additionally, returning void does not provide any feedback to the user regarding the success or failure of the assignment, making it difficult to debug errors.
Testing mitochondrial DNA is expensive but more time consuming than testing nuclear DNA. The difficult part is evaluating over a thousand variants per patient to find possibly one real mutation causing disease.
We are attempting to synchronize more than one process in the Producer-Consumer dilemma, which is a classic multi-process synchronization challenge. In the producer-consumer conundrum, there is only one Producer who creates some goods, and there is only one Consumer who consumes those goods.
Learn more about time-consuming here
https://brainly.com/question/4161622
#SPJ11
A luminaire (lighting fixture) that weighs more than _____ pounds shall be supported independently of the outlet box.
314.27
A luminaire (lighting fixture) that weighs more than 50 pounds shall be supported independently of the outlet box, as stated in section 314.27 of the National Electrical Code.
This means that the fixture should be supported by a separate structural support that can handle the weight of the fixture, rather than relying on the outlet box alone. This is important for safety reasons and to ensure that the fixture is securely installed.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.
Fixtures may also have a switch to control the light, either attached to the lamp body or attached to the power cable. Permanent light fixtures, such as dining room chandeliers, may have no switch on the fixture itself, but rely on a wall switch.
Fixtures require an electrical connection to a power source, typically AC mains power, but some run on battery power for camping or emergency lights. Permanent lighting fixtures are directly wired. Movable lamps have a plug and cord that plugs into a wall socket.
learn more about luminaire here:
https://brainly.com/question/24309468
#SPJ11
6.What layer in the transmission control protocol or internet protocol TCP IP model is responsible for defining a way to interpret signal so network devices can communicate?A. NetworkB. TransportC. ApplicationD. Data link
D. The Data Link layer in the Transmission Control Protocol/Internet Protocol (TCP/IP) paradigm is in charge of specifying how signals should be interpreted so that network devices may interact.
The actual transport of data over the network and its interpretation into signals that devices can comprehend and communicate with one another are the responsibilities of the Data Link layer. In this layer, data transmission methods for physical media like Ethernet or Wi-Fi are defined. In order to guarantee that the data is transferred properly, it also takes care of mistake checking and repair. The Data Link layer aids in ensuring the quick and effective transfer of data across a network by offering a dependable communication path between devices.
learn more about Data Link layer here:
https://brainly.com/question/14567230
#SPJ11
What is output by the following code?
def test():
print("Inside the sub")
#MAIN
print("In main")
test()
print("done.")
The string "done." is printed to the console. So the expected output of this code would be: bash In main Inside the sub done.
Code is a set of instructions written in a programming language that a computer can understand and execute. These instructions can be used to perform specific tasks, manipulate data, or solve problems. A computer program is created by writing code in a particular programming language and then compiling or interpreting the code to create a machine-readable binary file that can be executed by a computer. Programming languages can vary in syntax, structure, and capabilities, but they all serve the same fundamental purpose of allowing humans to communicate with computers to accomplish tasks. Some popular programming languages include Python, Java, JavaScript, C++, and Ruby, among many others.
Learn more about code here:
https://brainly.com/question/29835810
#SPJ11
A box contains ten cards labeled Q, R, s, I, U, v, w, x, y, and z. One card will be
randomly chosen.
What is the probability of choosing a letter from U to Z?
Write your answer as a fraction in simplest form. ??
Answer: 3/5
Explanation:
The probability of an event is
(number of ways an event can happen)/(number of ways anything can happen)
There are 6 ways to choose a card from U to Z. You can draw U,V,W,X,Y, or Z.
There are 10 total cards. So, the probability is 6/10=3/5.
(338-10(B)(4)(b)) requirements of Article 334-30 the cable shall be secured within ____ inches of termination and 4 ½ feet, and when installed underground the cable shall comply with the underground requirements in Article 339 - Underground Feeder Cable.
According to Article 334-30, the cable shall be secured within 12 inches of termination and every 4 ½ feet. When installed underground, the cable must comply with the underground requirements stated in Article 339, which covers Underground Feeder Cable.
Based on your question, it appears that you are asking about the specific requirements for securing cables in accordance with the National Electrical Code (NEC).
According to NEC 338-10(B)(4)(b), the cable must be secured within 12 inches of termination and at intervals not exceeding 4 1/2 feet. This means that the cable must be properly fastened and supported to prevent it from moving or becoming damaged.
Additionally, when installing the cable underground, it must comply with the requirements set forth in Article 339 - Underground Feeder Cable. This includes proper burial depth, use of approved conduit or raceways, and adherence to any local codes and regulations.
Overall, it is important to follow these NEC requirements and any additional local regulations to ensure safe and reliable electrical installations.
Learn More about Underground Feeder Cable. here :-
https://brainly.com/question/6068720
#SPJ11
Can you solve and write step by step
The appropriate values for he deformation and stress is given and attached.
What is stress?Deformation refers to the change in shape or size of a material under the influence of external forces or loads. Stress, on the other hand, is the internal force per unit area that develops in a material due to external loads. Deformation and stress are closely related, as the amount of deformation a material undergoes is determined by the level of stress that it experiences.
When a material is subjected to external forces or loads, it can undergo different types of deformation, including elastic deformation, plastic deformation, and fracture. Elastic deformation refers to the temporary deformation that a material undergoes when subjected to a load, and the material returns to its original shape once the load is removed. Plastic deformation, on the other hand, refers to the permanent deformation that a material undergoes when subjected to a load beyond its elastic limit. Fracture occurs when a material fails under excessive stress.
Learn more about stress on
https://brainly.com/question/21500228
#SPJ1
write the definition of a function zeroit, which is used to zero out a variable. the function is used as follows: int x
The function zeroit takes an integer variable x as an argument and sets its value to zero using a pointer to the variable, and it is useful for resetting the variable for subsequent operations.
What is the implementation and usage of the function zeroit in C++?The function zeroit takes an integer variable x as an argument and sets its value to zero. This function is useful when a variable needs to be reset to zero for a subsequent operation.
Here is an example implementation of the function:
arduino
void zeroit(int ˣ x) {
ˣ x = 0;
}
The function takes a pointer to an integer x as its argument and dereferences it to set its value to zero.
This ensures that the original variable passed to the function is modified, rather than a copy of the variable. The function can be called as follows:
int num = 5;
zeroit(&num);
After the call to zeroit, the value of num will be zero.
Learn more about function zeroit
brainly.com/question/31482848
#SPJ11
(590-4(E)) Multiwire branch circuits for temporary wiring shall be provided with a means to disconnect simultaneously all _____ conductors at the power outlet or panelboard where the branch circuit originated.
Temporary wiring is often used in construction sites, where power needs can change frequently, and it is important to ensure that the wiring is installed properly and in compliance with the NEC. This includes using the correct materials, following proper installation procedures, and ensuring that all wiring is properly grounded.
To further explain, a multiwire branch circuit is a type of electrical wiring where multiple circuits share a common neutral wire. Temporary wiring refers to wiring that is installed for a limited time, usually during construction or maintenance projects. The purpose of simultaneously disconnecting all ungrounded conductors (also known as "hot" or "live" wires) is to ensure the safety of individuals working on or near the electrical system.
Learn more about Multiwire branch circuits here: brainly.com/question/30312370
#SPJ11
Q9) e) What is the purpose of the acknowledgment number field?
The acknowledgment number field is a field in the TCP header that is used to indicate to the receiving device the sequence number of the next packet it is expecting to receive.
This helps to ensure that all packets are received in the correct order and that no packets are lost during transmission. The purpose of this field is to provide reliable data transfer and prevent data loss or corruption.The purpose of the acknowledgment number field in a TCP header is to indicate the next expected sequence number that the receiver wants to receive, confirming the successful receipt of previous data. This mechanism helps ensure reliable data transmission and maintains proper communication between sender and receiver.
Learn more about acknowledgment here
https://brainly.in/question/4165724
#SPJ11
To catch an exception, the code that might throw the exception must be enclosed in a ________.a. throws block.b. catch block.c. try block.d. finally block.
The correct answer is c. Try block. In Java, to catch an exception that might be thrown by a block of code, that code must be enclosed in a try block.
A try block is followed by one or more catch blocks, which are used to catch and handle any exceptions that are thrown within the try block.
The basic syntax of a try-catch block in Java is as follows:
csharp
try {
// code that might throw an exception
} catch (ExceptionType e) {
// exception handler
}
The code that might throw an exception is enclosed in the try block. If an exception is thrown, the Java runtime system will search for a matching catch block to handle the exception.
The catch block specifies the type of exception it can handle, using the ExceptionType parameter. If the type of exception thrown matches the type specified in the catch block, the code within the catch block is executed to handle the exception.
In addition to try and catch blocks, Java also provides a finally block, which is used to specify code that should be executed regardless of whether an exception is thrown or caught.
The finally block is optional and is typically used for cleanup code that needs to be executed, such as closing a file or releasing a resource, regardless of whether an exception occurred or was caught.
In summary, to catch an exception in Java, the code that might throw the exception must be enclosed in a try block, followed by one or more catch blocks to handle the exception.
The finally block is optional and is used to specify code that should be executed regardless of whether an exception is thrown or caught.
Learn more about Java here:
https://brainly.com/question/29897053
#SPJ11
A retentive timer must be completely timed out to be reset. true/false
False. A retentive timer does not have to be completely timed out to be reset, as it retains its accumulated time even when it is reset.
A retentive timer, also known as a memory timer or a latching timer, is a type of timer used in automation and control systems. Unlike a regular timer, which resets and restarts every time it is activated, a retentive timer "remembers" the time elapsed since it was last activated and continues to count the time even after it has been deactivated. This feature makes it useful in applications where timing accuracy is critical and where interruptions or power outages may occur.
Retentive timers are typically used in industrial control systems, such as in manufacturing and processing plants, to control various processes and operations. They can be programmed using specialized software or programmable logic controllers (PLCs) and can be set to trigger alarms, shut off machinery, or initiate other actions based on the elapsed time. Retentive timers are an important tool for achieving precision and reliability in many industrial and commercial applications.
Learn more about timer here:
https://brainly.com/question/10534421
#SPJ11
Explain why overloaded prefix and postfix ++ and -- operator functions should return a value.
Overloaded prefix and postfix ++ and -- operator functions are used to increment or decrement variable by a certain value. These functions should return a value because they are designed to modify the value of the variable they are applied to, and it is important for the programmer to know the current value of the variable after the operation is performed.
If the function does not return a value, the programmer may not be able to determine the outcome of the operation, which can lead to errors in the code. Additionally, returning a value allows for the use of the increment or decrement operation in more complex expressions, which can be useful in certain programming scenarios.
By doing this, the timer's current value will be reduced by 1, and the new value will be returned to the variable. Here is a detailed description:
1. Start with the timer's current value.
2. Subtract 1 from the current value using the decrement variable operator '--'.
3. Reset the variable timer with the new value.
Therefore, if the value of the timer was 10, it will be 9 when the phrase "timer--;" is run.
Learn more about decrement variable here
https://brainly.com/question/31018347
#SPJ11
If a refrigerator line must be brazed to a service valve, be sure to _______________.
If a refrigerator line must be brazed to a service valve, be sure to have a professional technician perform the service to ensure proper installation and prevent any damage to the refrigerator or injury to yourself.
If a refrigerator line must be brazed to a service valve, be sure to properly purge the system with nitrogen gas. This helps prevent oxidation, ensuring a clean and secure connection between the line and the service valve.
Learn more about service here: brainly.com/question/30415217
#SPJ11