Provide the IUPAC name and structure for the alkyne expected to produce the two compounds listed below upon ozonolysis. CH3CH2CO2H and (CH3)3CCO2H

In this galvanic cell, the strip of chromium in the Chromium(III) nitrate beaker is the anode, and the strip of copper in the Copper(II) nitrate beaker is the cathode. At the anode, the half reaction that occurs is 2Cr(s) → 2Cr³+ (aq) + 3e-. At the cathode, the half reaction that occurs is 3Cu² (aq) + 3e- → 3Cu(s). These two half reactions combine to form the overall reaction 2Cr(s) + 3Cu² (aq) → 2Cr³+ (aq) + 3Cu(s).

Oxidation Unit Test

1. Which statement best explains why magnesium and chlorine combine in a 1:2 ratio?

A. Magnesium has two valence electrons, and chlorine can accept one electron in its outer shell

2. Hydrogen and nitrogen combine to form ammonia. When nitrogen and hydrogen bond, nitrogen pulls the electrons from hydrogen toward itself. Which statement about the reactants is correct?

C. Hydrogen is oxidized, and nitrogen is reduced.

3. C3H8 + 5O2 → 3CO2 + 4H2O + energy

Which type of reaction is shown?

C. combustion

4. Which phrase best defines a redox reaction?

D. a reaction in which electrons are transferred between different atoms

5. Which statement describes the process of oxidation?

D. Oxidation results in a loss of electrons, so the oxidation number increases.

6. Which chemical equation represents a redox reaction?

D. Fe2O3(s) + 2Al(s) → Al2O3(s) + 2Fe(l)

7. Which statement correctly describes the oxidation number of the manganese atom (Mn) in MnI2 and MnO2?

A. Manganese has an oxidation number of +2 in MnI2 and +4 in MnO2.

8. Br2(l) + 2NaI(aq) → I2(s) + 2NaBr(aq)

Which elements are oxidized and reduced in the reaction?

D. Iodine (I) is oxidized, and bromine (Br) is reduced.

9. Which action occurs at an electrode of a galvanic cell?

D. electron transfer

10. Which statement best compares a battery and a galvanic cell?

A. A battery’s source of power is a galvanic cell in which a redox reaction produces electrical energy.

11. Zn + 2H+ → Zn2+ + H2

2Al + 3Cu2+ → 2Al3+ + 3Cu

Which elements are oxidized?

A. zinc (Zn) and aluminum (Al)

12. 2Cr(s) + 3Cu2+(aq) → 2Cr3+(aq) + 3Cu(s)

Which half reaction occurs at the cathode?

B. 3Cu2+(aq) + 6e– → 3Cu(s)

CH3CH2CH2CH3 i.e., butane having more boiling point among the all given .

Compounds composed of molecules joined by chemical bonds arranged so that their charge distributions are symmetrical are called non-polar compound

Compounds composed of molecules joined by asymmetric polar bonds.

Polar compounds exhibit polarity. This is a property characterized by two opposite charges or poles. As such, it can be converted into a water-soluble ion, which is a polar molecule.

Reason :

while increasing the number of carbons in the chain, the boiling point also increases. The alkanes having intractions with the neighbour alkanes will be Van der Waals dispersion forces, these intractions are very less in the small molecule such as methane. The the force of attraction between the molecules increases as the molecule gets longer and has more electrons.

Learn more about Polar and Non-polar compound here :

https://brainly.com/question/1426521

#SPJ4

Answer:

15 grams.

Explanation:

Molar mass of KClO3 = (39.10+35.45+3(16.00)) g/mol = 122.55 g/mol. Why? Because the molar mass of a compound is the sum of the molar masses of its constituents. There is 1 K atom, 1 Cl atom, and 3 O atoms in KClO3.

We can determine the mols of KClO3 given its mass and molar mass. How? Using the factor-label method (cancelling units out):

25 g * 1mol/122.55g = 0.203998368 mol.

We must now use mol ratios to determine the amount of potassium chloride (in mols) produced:

n of KCl = 0.203998368 mol(KClO3) * (2 mol KCl)/(2 mol KClO3) = 0.203998368 mol.

Molar mass of KCl = (39.10 + 35.45) g/mol = 74.55 g/mol.

From here, we can find the mass of KCl using the same logic discussed above:

m of KCl = 0.203998368 mol * 74.55 g/mol = 15.20807833 g = 15 g (rounded in accord with significant figures)

(4) (D/H)i and 4 fi are accessible for benzaldehyde since the 2 H-NMR spectra exhibits four peaks.

Benzoaldehyde has been used as a carcinostatic drug in humans and laboratory animals, a chemical that prevents or delays the growth of cancerous tumors. Benzaldehyde is not included in the NTP as a recognized or presumed human carcinogen.

Due to its bitter almond aroma, benzoaldehyde is employed in aroma compositions and used as a beginning ingredient in a wide variety of aromatic fragrance and taste substances.

to know more about benzaldehyde visit:

https://brainly.com/question/28146845

#SPJ4

The final temperature of the metal and water mixture, assuming no heat loss to the surroundings is 23.7 °C.

The heat expression is given as :

q = mc ΔT

q = heat

m = mass

c = specific heat

ΔT = change in temperature

for the metals Al and Fe :

q = 5 × 0.89 × ( 100 - T) + 10 × 0.45 (100 - T)

for the water is given as :

q = 97.3 × 4.184 ( T - 22 )

the heat lost by the Al and Fe = heat gained by the water

5 × 0.89 × ( 100 - T) + 10 × 0.45 (100 - T) = q = 97.3 × 4.184 ( T - 22 )

415.95 T = 9851

T = 23.7 °C.

To learn more about heat here

https://brainly.com/question/28984759

#SPJ4

Nuclides below the valley of stability can become more stable through the processes : D) positron emission.

An imaging procedure that can assist in determining how your tissues and organs function metabolically or biochemically is known as a positron emission tomography (PET) scan. A radioactive substance (tracer) is used in the PET scan to display both regular and aberrant metabolic activity.

A proton inside a radionuclide nucleus is transformed into a neutron while generating a positron and an electron neutrino, which is known as beta plus decay, positron emission, or + decay. The weak force mediates positron emission.

To know more about positron emission, refer

https://brainly.com/question/4598666

#SPJ4

(Option C.) Selenium is an element with an atomic number of 34 and an effective nuclear charge of +12, which is higher than the effective nuclear charge of zinc, which is +10. It is located in the fourth period of the periodic table and is situated in the p-block of elements. Selenium has many uses and is essential for human health.

Zinc is an element that has an atomic number of 30, and an effective nuclear charge of +10. It is located in the fourth period of the periodic table, and is situated in the d-block of elements. However, selenium, with an atomic number of 34 and an effective nuclear charge of +12, has a higher effective nuclear charge than zinc. Selenium is located in the fourth period of the periodic table and is also situated in the p-block of elements. It is an essential trace element for humans and many other organisms, and its compounds are used in many industrial applications.

Learn more about Nuclear charge: https://brainly.com/question/15255548

#SPJ4

Explanation:

The relationship between units of length, mass, and volume can be described by the following formulas:

Length x Width x Height = Volume

For example, if a box has dimensions of 2 meters x 3 meters x 4 meters, the volume of the box is 24 cubic meters (2 x 3 x 4 = 24).

Volume x Density = Mass

For example, if a box has a volume of 24 cubic meters and a density of 500 kg/m^3, the mass of the box is 12,000 kilograms (24 x 500 = 12,000).

Mass / Volume = Density

For example, if a box has a mass of 12,000 kilograms and a volume of 24 cubic meters, the density of the box is 500 kg/m^3 (12,000 / 24 = 500).

These formulas demonstrate the relationships between units of length, mass, and volume. Length and width are used to calculate the volume of an object, mass and volume are used to calculate density, and volume and density are used to calculate mass.

The moles and mass of the magnesium hydroxide are 0.356 mol and 20.77 g.

A balanced equation in which the number of atoms of each element is equal on both sides of the chemical equation. The law of conservation of matter must follow a balancing of equations.

By obeying the law of conservation of matter, the total mass of the chemical elements on the reactant side must be equal to the total mass of chemical elements on product side in a balanced chemical equation.

The balanced chemical equation magnesium hydroxide and HCl:

[tex]Mg(OH)_2 +2HCI \longrightarrow MgCl_2 + 2H_2O[/tex]

The mass of the HCl = 25 g

The number of moles of HCl = 25/36.5 = 0.712 mol

2 mol of HCl reacts with magnesium hydroxide = 1 mol

0.712 mol of HCl reacts with magnesium hydroxide = 0.712/2 = 0.356 mol

The mass of magnesium hydroxide  = 0.356 × 58.32 = 20.77 g

Learn more about the balanced chemical equation, here:

brainly.com/question/28294176

#SPJ1

Answer:

Explanation: Total atomic and mass numbers should be equal on both sides of the equation.

The atomic number of X=92-90 =2

The mass number of X=238-234 =4

Hence, it is an alpha particle.

It is a type of nuclear fusion, deuterium-tritium fusion. When one deuterium nucleus and tritium nucleus fuse, they create a helium nucleus and a free neutron. The reaction releases an energetic neutron.

Answer:

fission

Explanation:

it's literally dividing into 2 parts while fusion is where 2 things multiply to become one big thing.

Option :A) Ferritic stainless steels are used for ornamental or decorative applications such as architectural trim, and tend to be brittle.

Stainless steel is an alloy of iron, chromium, and, occasionally, nickel and other metals that resists corrosion.

Stainless steel is the ultimate "green material" because it is completely and essentially recyclable. In reality, the recovery rate for the building industry is quite close to 100%. In addition to being durable and environmentally inert, stainless steel also satisfies the requirements of sustainable building. Additionally, it does not leak substances that, when in touch with substances like water, could change its composition.

In addition to these advantages for the environment, stainless steel is also very hygienic, easy to maintain, highly durable, and offers a wide range of features. As a result, stainless steel is used in numerous commonplace items.

To learn more about stainless steel Please click on the given link:

https://brainly.com/question/11653527

#SPJ4

Complete question is :

____ stainless steels are used for ornamental or decorative applications such as architectural trim, and tend to be brittle.

A) Ferritic

B) Austenitic

C) Martensitic

D) Precipitation hardening

The hybrid orbitals used by the central atom(s) and the type(s) of bonds formed in so2. One 3s orbital and two 3p orbitals are hybridised during SO2 synthesis.

One 3s orbital and two 3p orbitals are hybridised during SO2 synthesis. One hybrid orbital will have a single pair of electrons, while two hybrid orbitals have unpaired electrons. Pi bonds are formed between the 3d and 3p orbitals, which are unchanged.

The type of hybridization that occurs in sulphur dioxide is sp2. We will first examine the sulphur atom, which will serve as the focal point, to ascertain this. This centre atom becomes SO2 when it bonds with two oxygen atoms, resulting in a structure with the formula O=S=O. Sulfur and the two oxygen atoms have one sigma bond and one pi bond created between them. One single pair can also fit inside the atom.

To learn more about hybridization Please click on the given link:

https://brainly.com/question/13841564

#SPJ4

When a substance undergoes a chemical reaction in a closed system, mass and energy will not change.

A closed system in the thermodynamic system is considered such a system in which energy can easily either enter or leave the system while mass is preserved within the system's borders.

In the same way, in chemistry, such system which enables energy transfer but does not allow reactants or products to enter or exit is considered a Closed System.

In the case of chemical reactions, usually, heat and light are considered Reactants and products.

So, when a substance undergoes a chemical reaction, then in that case the mass and the energy will not change.

For more such questions on Chemical reaction in Closed system

https://brainly.com/question/22952835

#SPJ4

The mole fraction of dinitrogen monoxide is 0.5871 and the mole fraction of chlorine pentafluoride is 0.4129. Each answer entry has 4 significant digits.

The mole fraction of a gas is calculated by dividing the number of moles of the gas by the total number of moles of gas present. This can be done by first calculating the number of moles of each gas present.  

The number of moles of dinitrogen monoxide (N₂O) is calculated using the ideal gas law:  n = PV/RT

n = (7.00L)(101.3 kPa)/(8.314 J/mol K)(26.8°C + 273.15 K)

n = 0.0644 mol  

The number of moles of chlorine pentafluoride (ClF₅) is calculated using the ideal gas law:

n = PV/RT  

n = (7.00L)(101.3 kPa)/(8.314 J/mol K)(26.8°C + 273.15 K)

n = 0.0451 mol  

The total number of moles of the gas present is the sum of the moles of each gas:

n = n(N₂O) + n(ClF₅)

 n = 0.0644 mol + 0.0451 mol

n = 0.1095 mol  

The mole fraction of dinitrogen monoxide is then calculated by dividing the number of moles of N₂O by the total number of moles of the gas present:  X(N₂O) = n(N₂O)/n

X(N₂O) = 0.0644 mol/0.1095 mol

 X(N₂O) = 0.5871

The mole fraction of chlorine pentafluoride is calculated by dividing the number of moles of ClF₅ by the total number of moles of the gas present:  X(ClF₅) = n(ClF₅)/n  

X(ClF₅) = 0.0451 mol/0.1095 mol

X(ClF₅) = 0.4129

To  know more about mole fraction refer to the link   brainly.com/question/29808190

#SPJ4

The Tl-207 has the half life of 4.77 minutes and half life of pd-103 is 6.5 million years. Both involves Radioactive decay.

Tl-207 is one of the 37 isotopes of Thallium and has a half-life of 4.77 minutes, the longest half-life of naturally-occuring radioisotopes. During beta decay, an electron, also called a beta-particle, is emitted from the nucleus; simultaneously, a neutron is converted into a proton in the nucleus. This causes the atomic number to increase by 1, but leaves the atomic mass unchanged. The most stable radioisotopes are 106Pd with a half-life of 6.5 million years. The primary decay mode before the most abundant stable isotope, 106Pd, is electron capture and the primary mode after is beta decay. The primary decay product before 106Pd is rhodium and the primary product after is silver.

To learn more about Radioactive decay please visit:

https://brainly.com/question/24115447

#SPJ4

According to molar concentration,15 ml of  of 0.200 M K₂CrO4 is required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of two solutions , molarity or volume of 1 solution can be found out as, M₁V₁=M₂V₂

Substitution in above formula gives, V₁=0.100×30/0.200=15 ml.

Thus, 15 ml of 0.200 M K₂CrO4 is required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ1

On the basis of the information in the table, the arrangement of the binary compounds in order of increasing bond polarity is CH4 < SiCl4 < SF4.

A bond is said to be polar when there is a large difference in electronegativity between the atoms. If we check out the electronegativity differences between the atoms, we have the following;

C - H = 2.5 - 2.1 = 0.4

Si - Cl = 3.0 - 1.8 = 1.2

S - F = 4.0 - 2.5 = 1.5

We can see that the highest electronegativity difference and highest polarity is observed in the S - F bond, followed by the Si - Cl bond and finally the C - H bond has the lowest electronegativity difference and lowest polarity.

To learn more about binary compound check the link below:

https://brainly.com/question/25150639

#SPJ4

Complete question:

On the basis of the information above, which of the following arranges the binary compounds in order of increasing bond polarity?

CH4 < SiCl4 < SF4

Answer: The energy change when 100 g of 410A goes from -40.0 °C to -60.0 °C is -184 kJ.

Explanation:

To find the energy change when 100 g of 410A goes from -40.0 °C to -60.0 °C, we need to use the specific heat capacity of 410A in the liquid state, which is 1.84 kJ/kg K.

The energy change can be calculated using the formula

q = m * c * ΔT,

where q is the energy change, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Plugging in the values, we get:

q = 100 g * 1.84 kJ/kg K * (-60.0 °C - (-40.0 °C))

Simplifying the equation, we get:

q = 100 g * 1.84 kJ/kg K * (-100.0 °C)

Converting 100 g to kilograms gives us:

q = 0.1 kg * 1.84 kJ/kg K * (-100.0 °C)

Solving for q, we get:

q = -184 kJ

So the energy change when 100 g of 410A goes from -40.0 °C to -60.0 °C is -184 kJ.

A  Powermite gradually between 50-60%.

Round bottom flask-The round bottom flasks are used for distillation, chemical reactions, heating liquid sample, and storage needs. They are specially formed for uniform heat distribution. The spherical containers, which are made of robust glass, will distribute encountered tension equally across surfaces to minimise breaking. The round bottom flasks are mostly used for chemical and biological research and come with either a short or long neck.

When using a flask with a round bottom, the following safety considerations must be observed:

I. A thorough examination of the flask's spherical bottom for cracks, blemishes, or other flaws.

II. Be careful not to heat the flask when it is shut.

III. Make careful to use a clamp for support when hanging the round-bottom flask from a stand.

LEARN MORE ABOUT round bottom flask HERE

https://brainly.com/question/13279966

#SPJ4

The range is it likely to be -18 m/s to 18 m/s.

Define Heisenberg's uncertainty principle.

According to Heisenberg's uncertainty principle, it is impossible to precisely measure or quantify an object's position or momentum.

Given:

xy-plane has a 10 um diameter

vx= 0 m/s

From Heisenberg relation, we can say

Δx Δp ≥ h/2

We can modify as,

Δp= h/2Δx

Relation between Δvx and Δpx is

Δpx= mΔvx=0

Here Δx= 10um

=10 um[tex]\frac{10^{-6} m}{1 um}[/tex]

= 10 x [tex]10^{-6}[/tex]m

we get,

Δvx= h/2Δx

Δvx= h/2mΔx

Δvx= 6.63 x [tex]10^{-23}[/tex]/ 2(9.11 x [tex]10^{-31}[/tex])(10 x [tex]10^{-6}[/tex])

=36 m/s

Average velocity is zero, so range is -18 m/s to 18 m/s.

Hence proved.

To learn more about Heisenberg uncertainty principle from the given link.

https://brainly.com/question/16941142

#SPJ4

Complete question:

a thin solid barrier in the xy-plane has a 10 um diameter circular hole an electron traveling in the z-direction with vx=0m/s passes through the hole. afterward is vx still zero? if not, what range is it likely to be?

18 cm3/mol is the molar volume of a specific type of solid lead. The following should be determined assuming a cubic closest-packed structure. 4 Pb atoms are contained in each unit cell.

Protons, neutrons, and electrons are three extremely small types of particles, together referred to as subatomic particles, that make up an atom. The nucleus, which is made up of protons and neutrons, is where an atom's energy is stored. An electron cloud flies above the nucleus.

Atoms of hydrogen, carbon, nitrogen, and oxygen make up the vast majority of the molecules in your body. The other elements necessary for life are also present in much lesser quantities in you.
To know more about Atoms visit:

https://brainly.com/question/13654549

#SPJ4

The net ionic equation is,Ca2+(aq.) + S2(aq.)   - --> Ca S (s) . This involves a displacement reaction.

The displacement reaction occurs here. A displacement reaction occurs when a more reactive element displaces, or pushes out, a less reactive element from a compound that contains the less reactive element. After a displacement reaction, the less reactive element is now pure and left uncombined. This is the special type of reaction where the anions exchange cations, in the form,

A + BC  --->  AC + B

Ca(NO3)2 + Na2S = Ca S + NaNO3

This will most often occur if Ca(NO3)2 is more reactive than Na2S  thus giving a more stable product. The reaction in that case is exergonic and spontaneous.

so, ionic equation is,

Ca2+ + 2NO3- + 2Na+ + S2-  ====> Ca S + 2NO3- + 2Na+

To learn more about Displacement reaction please visit:

https://brainly.com/question/20690229

#SPJ4

The change in temperature would be 600 K TO 300 K

According to Gay Lussac's Law the temperature and pressure are directly proportional.

Gay Lussac's Law states that " The pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature."

P is directly proportional to T.

P= k* T

k is the proportionality constant.

P1/T1 = P2/T2

So when the temperature is halved the pressure is halved.

So the change in temperature will be from 600K to 300K

For further information about Gay Lussac's Law, please refer

https://brainly.com/question/12807582

The order of the melting of the butter among the materials is;  tin- plastic - wood. Option D

We know that the term heat transfer has to do with the manner in which heat can be transferred from one material to another. We can see that the nature of the materials differ. The tin is a pure conductor of heat, the plastic and the wood are poor conductors of heat.

However, it is clear that heat would flow better from the plastic than it would do from the wood. As such, the butter on the tin would melt the greatest and the butter on the wood would melt the least.

Learn more about heat transfer:https://brainly.com/question/13433948

#SPJ1

When using specialized reagents like oxidizing reagents, reducing reagents, Grignard's reagents, etc., the reaction in organic chemistry is carried out by changing one functional group to another functional group.

Cyclohexane carboxaldehyde, which is transformed into 1-cyclohexylethanone, is the suggested starting material. (Aldehyde to ketone conversion).

As a result, the reaction takes place in two steps:

1. Grignard's reagents react with aldehydes to produce alcohol; for example, cyclohexane carboxaldehyde interacts with methyl magnesium bromide to produce secondary alcohol.

2. The intended product is a ketone, which is produced when the secondary alcohol combines with PCC (pyridine chlorochromate).

To know more about organic chemistry click on the link below:

https://brainly.com/question/26854014

#SPJ4

The balanced chemical equation of methane with the heat of reaction will generally tell us that One mole of CH4 reacts with two moles of O2, producing one mole of CO2 and two moles of H2O.

A balanced chemical equation is one that generally has equal number of atoms of each element on both sides of the equation. This equation can be used to determine how many grams, moles or also molecules of each reactant will react with each other and how many grams, moles or molecules of each product will be produced.

A balanced chemical equation generally gives information about the number of moles or the number of molecules of each reactant that is usually consumed during the reaction as well as the number of moles or the number of molecules of products that are produced during the chemical reaction.

The given chemical equation is:

[tex]CH_{4}[/tex] + [tex]2O_{2}[/tex]  → [tex]CO_{2}[/tex] + [tex]2H_{2}O[/tex]

According to this balanced chemical equation,

One mole of CH4 reacts with two moles of O2, producing one mole of CO2 and two moles of H2O.

To know more about balanced chemical equation

https://brainly.com/question/15052184

#SPJ4

Nuclear fission is a chain reaction in which a nucleus is split into two smaller nuclei with a combined mass less than that of the original nucleus.the critical mass A chain reaction is a self-sustaining reaction that produces an ongoing series of reactions.

Two light nuclei combine to form one heavy nucleus in a fusion reaction. The process releases energy because the mass of the resulting single nucleus is less than the combined mass of the two initial nuclei. The remaining mass is converted into energy.

Nuclear fusion reactions power the Sun and other stars. When two light nuclei fuse together in a fusion reaction, a heavier nucleus is formed.

The process generates energy because the mass of the resulting single nucleus is less than the combined mass of the two initial nuclei. The remainder of the mass is converted to energy. Einstein's equation (E=mc2), which states that mass and energy can be transformed into one another, explains why this occurs. If scientists can figure out how to use fusion energy in Earth-based equipment, it could be a significant source of energy generation.

To learn more about Nuclear fission Please click on the given link:

https://brainly.com/question/17870368

#SPJ4

A colloidal particle is a tiny particle whose size can range from a few nanometers to several micrometers, depending on the particular colloidal behavior being studied. For instance, if the stability of a colloidal solution is a concern, the upper limitation needs to be lower than roughly five micrometers, as beyond this limit the Brownian motion of the particles may not be strong enough to prevent them from coagulating with one another.

A suspension is defined as a homogenous mixture of particles having a diameter bigger than 1000 nm so that the particles are visible to the eye sight. All of the components in this kind of combination are thoroughly combined, and all of the particles are visible under a microscope.

A true solution-Any homogenous mixture of two or more substances that has a particle size of less than 10-9 m or 1 nm is considered to be a genuine solution.

Know more about colloidal particles at:

https://brainly.com/question/3003333

#SPJ4

Answer: a

Explanation:

Answer:

Explanation:

In this question, we are told that we have 0.300 molar n, a n o 3. So we have a material, and our goal should be obvious to us. So we have to determine, but this item is molarity or concentration concentration. It is the molarity indirectly. So, in this scenario, we must determine the molarity or concentration of sodium ions and positive ions. So, what's the deal here? To begin, we should understand this n, a n o 3 point. It is an ionic molecule, therefore it will entirely dissociate why it will completely dissociate. We can argue that it can dissociate partially as well, but we are stating that it will dissociate fully since it is a strong acid and strong base, therefore it ferocites totally into sodium and nitrate irons. So, what happens next? We should understand molarity, which is equivalent to concentration and is denoted as a mole. So we can create this formulary in this specific scenario now fording. What we are capable of. We may state that in this situation, we have this 0.300 point. It is molarity, thus 0.300 moles of n a n o 3 are present and are dissolved in the 1 later, so n, a m o 3. We have 0.300 mole, and on differentiation, it will give us an a positive and a no 3 negative, and the concentration of these iron will also be this amount since it is a combination that is completely dissociated. So sodium concentration may be represented as moles are 0.300 divided by volume on later. As a result, it will likewise be 0.300 molar. It is a sodium iron concentration here. Hope this helps