Predict the major product in the reaction shown below. AlCl3

146.35 × 10²³ atoms of Magnesium are present in 1 mole of Magnesium oxide.

The number of atoms found in a mole of compound is calculated by relationship between the mole and the Avogadro number. The Avogadro number is always constant that has been given by the number 6.023 × 10²³.

The relationship between the atoms and mole is given as,

1 mole = 6.023 × 10²³ atoms.

So, the number of atoms that is present in 1 mole of the MgO is equivalent to the Avogadro number.

Therefore, 1 mole of MgO has 6.023 × 10²³ atoms.

Thus, the atoms of Mg is given as:

Mg atoms = Mass of Mg × Avogadro number

Mg atoms = 24.3g × 6.023 × 10²³

Mg atoms = 146.35 × 10²³

Hence, 1 mole of MgO contains 146.35 × 10²³ atoms of Mg.

Learn more about moles from the link given below.

https://brainly.com/question/22015212

#SPJ4

Answer:

amount

Explanation:

according to collision theory the particles must be in/ needs the correct orientation and energy to attain reaction.

The theory that explains successful reactions is called the collision theory. The molecules must collide in the correct orientation and with sufficient energy to make a reaction. The reacting particles must undergo forward and reverse movements to react with strength.

If the collision is less, the reaction will not take place. If the colliding particles have more energy, thus the collisions will be successful, and a successful response will occur. The rate of a reaction depends on the successful collisions between reactant particles, the more successful the collision, the faster the reaction.

Examples: if two Ballard balls collide, they bounce off each other. If a reaction between A and B happens, we can see a disruption between their atoms.

to know more about collision theory

https://brainly.com/question/2334061

According to collision theory what is needed by particles for reaction?

Combustion, breakdown, single-replacement, double-replacement, and combinations are the five fundamental types of chemical reactions.

Scientists have for the first time compiled a global inventory of more than 350,000 chemicals and chemical mixes that are authorized for commercial manufacturing and usage, which is up to three times the number typically assumed.

Sulfuric acid, also referred to as H2SO4, is the chemical that is most frequently manufactured worldwide. The majority of the time, it is utilized in fertilizers, but it is also present in many industrial cleaning products.

To know more about chemical visit:-

https://brainly.com/question/29240183

#SPJ4

Rapid reaction between sodium metal and water produces colorless sodium hydroxide (NaOH) and hydrogen gas solution (H2). Because there contains hydroxide in the dissolved state, the final solution is basic.

2Na(s)+2H2O(l)→2NaOH(aq)+H2(g).

an exothermic response What form and how does sodium interact with water? Caustic soda, a sodium hydroxide compound with a high alkalinity, and hydrogen gas combine to generate an odorless solution. This reaction is exothermic.

To know more about sodium metal reacts with water visit :-

https://brainly.com/question/16706007

#SPJ4

The diffusion is ratio is 1.0043 : 1 for the cycle of gaseous diffusion of the 235uf6 in the sample.

Gaseous diffusion enrichment is primarily based totally at the small mass distinction among 235UF6 and 238UF6, this means that that the 235UF6 travels barely greater speedy at a given temperature.

The more velocity of the 235UF6 molecules way that they effect with the membrane greater regularly and are consequently much more likely to byskip thru one of the pores. Gaseous diffusion refers back to the go with the drift of remember whilst there may be a distinction in awareness of the cloth among the indoors of the concrete and the outside environment, or among distinctive areas inside a concrete mass.

Read more about diffusion;

https://brainly.com/question/94094

#SPJ4

The mass of 1 mole of magnesium oxide is 40.3044 g/mol.

The molecular weight of a substance is equal to its mass in one mole. Water, for example, has a mean molecular weight of 18.015 atomic mass units (amu), implying that one mole of water weighs 18.015 grams. In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance.

The mole is widely used in chemistry to express quantities of reactants and products of chemical reactions. The term gram-molecule was formerly used for "mole of molecules", and gram-atom for "mole of atoms".

To learn more about moles of substances, here

https://brainly.com/question/19711232

#SPJ4

For the lighter nuclei up to atomic number 20, the number of neutrons increases at the same exact rate as the protons increase in number. For the heavier nuclei, the increase in the number of neutrons is faster than the protons increase.

The neutron-proton ratio or N/Z ratio of an atomic nucleus can be described as the ratio of its number of neutrons to its number of protons. Among stable nuclei, the neutron-proton ratio increases with increasing atomic number.

Because electrical repulsive forces between protons with distance are different than strong nuclear force attractions. Proton density in stable larger nuclei should be lower than in smaller stable nuclei.

For each element with atomic number Z up to that of calcium (Z = 20), there exists with N/Z ratio of one, except beryllium (N/Z = 1.25). Uranium-238 has the highest N/Z ratio of 1.587, while lead-208 has the highest N/Z ratio at 1.537.

For the heavier nuclei, the N/Z ratio is greater than 1 so the number of neutrons is greater than the protons.

Learn more about neutron-proton ratio, here:

https://brainly.com/question/17699889

#SPJ1

The mass of a sample of copper (II) sulfate containing 2.56 x [tex]10^{23[/tex] atoms of copper would be 27.52 grams.

According to Avogadro, 1 mole of every substance contains 6.022 x [tex]10^{23[/tex] molecules or atoms of the substance.

Following this principle, the amount, in moles. of copper (II) sulfate present in 2.56 x [tex]10^{23[/tex] atoms of the substance would be:

6.022 x [tex]10^{23[/tex]  atoms = 1 mole

2.56 x [tex]10^{23[/tex] atoms = 2.56 x [tex]10^{23[/tex] /6.022 x [tex]10^{23[/tex]

                             = 0.43 mol

Recall that: mass = mole x molar mass

Mass of 0.43 mol copper = 0.43 x 64

                                          = 27.52 grams.

In other words, a sample of copper (II) sulfate containing 2.56 x [tex]10^{23[/tex] atoms of copper will contain 27.52 grams of copper.

More on Avogadro's number can be found here: https://brainly.com/question/1445383

#SPJ1

Answer:

Sugar, starch, minerals, chemicals, colors, fillers, plastic resin, and recycled plastics are examples of bulk solids. These commodities account for more than 80% of all things carried globally.

Explanation:

The root mean square speed formula is , v=√(3RT/M).

As per the formula v= √(3RT/m)

T is the temperature

m is the mass of the molecules

R is the Gas constant

The temperature must be converted to kelvin and the molar mass must be found in Kg.

Any change in temperature and molar mass affect the speed of gas molecules.

The speed of the molecules in a gas is proportional to the temperature and is inversely proportional to the molar mass of the gas.

In other words, as their temperature increases, their speed increases, and finally their total energy increases as well.

But still, it's not possible to define the speed of any one gas particle. As such, the speed of gases are defined in terms of their root mean square speed.

Thus, the root mean square speed formula is , v=√(3RT/M) is well defined.

To know more about RMS, click on https://brainly.com/question/22974871

#SPJ4

Polymers whose molecules are comprised of repeating units of two distinct kinds are the best at describing copolymers.

A polymer that has two or more different monomer species is called a copolymer. Copolymers are a common type of polymer used in industry. Examples include acrylonitrile butadiene styrene, nitrile rubber, and polyethylene-vinyl acetate (PEVA) (ABS). Copolymerization is the process by which a copolymer is created from several types of monomers. a few more polymers. In condensation polymerization, tiny molecules are eliminated together with the polymerization of one or more monomers. From well-known synthetic plastics like polystyrene to natural biopolymers like DNA and proteins that are essential to biological structure and function, polymers come in many shapes and sizes.

Correct question:

Copolymers are best described by which one of the following:

a.monomers

b.polymers

c.elastomers

d.thermosets

To know more about copolymers please click on the link brainly.com/question/15736390

#SPJ4

To solve this, we must know each and every concept that is related to electrolytic solution. Therefore, In solution, an electrolyte produces ions. The correct option is option A.

In chemistry and physics, an electrolyte is a substance that conducts electric current by separating into positively and negatively charged particles known as ions, which migrate toward and are normally released at the negative and positive terminals.

Acids, bases, and salts are the most common electrolytes, which ionize when saturated in solvents such as water or alcohol. An electrolyte readily dissociates into ions in solution.

Therefore, in solution, an electrolyte produces ions. The correct option is option A.

To know more about electrolyte, here:

https://brainly.com/question/29750976

#SPJ1

Answer:

2. 6.07 g

3. 38%

Explanation:

2.

2AgNO3(aq) + Na2S(aq) --> Ag2S(s) + 2NaNO3(aq)

molecular mass of AgNO3 is 169.87 g/mol

so converting 7.79 g into mole : 7.79/169.87 = 0.049 mol

2 mol of AgNO3 will produce 1 mole of Ag2S

so 0.049 mole of AgNO3 will produce 0.049/2 = 0.0245 mol of Ag2S

since molecular mass of Ag2S is 247.8 g/mol

=> 0.0245 x 247.8 = 6.07 g

3.

molecular mass of NaBr is 102.894 g/mol

=> 3 gm will have: 3.0 / 102.849 = 0.029 mol

according to the reaction, 1 mole of NaBr will produce 1 mole of HgBr

so 0.029 mol of NaBr will produce 0.029 mol of HgBr

since molecular mass of HgBr is 360.41 g/mol

=> mass = 0.029 x 360.41 = 10.45 g

so actual mass/theoretical mass

4.000/10.45 = 0.382 or 38%

Please double check the calculations. Hope this help.

The difference between normal, dry, and oil shampoo are the forms that they come in. Normal is a liquid. Dry is powder and so solid, while oil shampoo is oily.

The benefits of 2-in-1 shampoo and conditioner include :

A 2 -in-1 saves you time by avoiding the two separate shower stages while also moisturizing and cleansing your hair. Bringing one bottle of 2-in-1 shampoo and conditioner whether you're traveling or showering on the move, for instance, not only saves you time showering but also valuable room in your cosmetics bag."

The sustainability benefit of a 2-in-1 would be its second advantage. In addition to buying fewer things (presumably resulting in less plastic trash), you are also (again, theoretically) using less water in the shower.

Dry shampoo is a powder used for dry cleaning. Ordinary shampoo cleans like soap. Because it is stronger than dry shampoo, regular shampoo is more drying.

Find out more on shampoo and conditioner at https://brainly.com/question/29648485

#SPJ1

Neutralization reactions find applications in antacids,industrial process, environmental remediation and also in laboratories and even waste water treatment. These are reactions between an acid and a base.

Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.  Compounds such as  HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.

According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic  acids  depending on the number of protons which are liberated on dissociation.

Acids are widely used in industries  for  production of fertilizers, detergents  batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.

Mind map can be drawn by writing neutralization reaction in center with the mentioned applications connected with neutralization reaction.

Learn more about acids,here:

https://brainly.com/question/29796621

#SPJ2

Simply put, as the amount of carbon dioxide in a tight space increases, it substitutes for such oxygen your body requires to survive.

A significant amount can replace oxygen in the atmosphere.Reduced oxygen availability can cause symptoms like weariness, emotional instability, clumsiness, fast breathing, and rapid heart rate.

An American Conference on Governmental Industrial Dentists (ACGIH) suggests a TWA Threshold Limit Values (TLV) of 5,000 ppm for 8 hours and a 10-minute ceiling exposure limit of 30,000 ppm.40,000 is seen as being instantly threatening to one's health and life (IDLH value).

To know more about carbon dioxide visit:

https://brainly.com/question/3049557

#SPJ4

The net chemical equation for the production of hydrogen from propane and water can be written as follows:

C3H8 + 2H2O --> 3H2 + CO2

This equation describes the process of steam reforming, which is a common method of producing hydrogen from hydrocarbons such as propane. In this process, propane is reacted with steam (water vapor) to produce hydrogen and carbon dioxide.

The reactants on the left side of the equation are propane (C3H8) and water (H2O). The products on the right side of the equation are hydrogen (H2) and carbon dioxide (CO2). The coefficients in front of the compounds indicate the number of molecules of each compound that are involved in the reaction.

To learn more about steam reforming:

https://brainly.com/question/28894018

#SPJ1

The following is a representation of the net chemical equation for the creation of hydrogen from propane and water:

2H₂O + C₃H₈ - 3H₂ + CO₂

This equation covers the steam reforming procedure, which is a typical way to create hydrogen from hydrocarbons like propane. In this procedure, steam (water vapor) and propane are combined to create hydrogen and carbon dioxide.

Propane (C₃H₈) and water are the reactants on the left-hand side of the equation (H₂O). Carbon dioxide (CO₂) and hydrogen (H2) are the byproducts on the right side of the equation (CO₂). The number of molecules of each compound that are involved in the reaction is indicated by the coefficients placed in front of the compounds.

know more about compound here

https://brainly.com/question/13516179#

#SPJ4

The freezing point of the solution can be calculated as 0.6 9.

Freezing point is the temperature at which a liquid turns into a solid. At the freezing point, the molecules of the liquid have lost enough kinetic energy that they can no longer move freely and they will form a crystal lattice structure. The freezing point of a substance is determined by the pressure of the liquid.

The freezing point of a solution is determined by a colligative property known as freezing point depression. This property states that when a solute is dissolved in a solvent, the freezing point of the solution is lower than that of the pure solvent.
The freezing point depression of an aqueous solution containing 17 g of C2H5OH in 1000 g of water can be calculated using the formula:
T f = K f * m
where T f is the freezing point of the solution, K f is the freezing point depression constant for water (1.86 km -1), and m is the molar concentration of the solution (mass of solute / mass of solvent).
Since the mass of C2H5OH is 17g, the molar mass is 46 g/mol, and the mass of water is 1000 g, the molar concentration can be calculated as:
m = (17 g / 46 g/mol) / (1000g) = 0.370 mol / kg
Thus, the freezing point of the solution can be calculated as:
T f = 1.86 km -1 * 0.370 mol/kg = 0.69.

To learn more about freezing point
https://brainly.com/question/27184453
#SPJ4

The most important factor affecting both the boiling point elevation and freezing point depression in a solution is the concentration of the solute.

A solute is a substance that is dissolved in a solution. It is usually a solid or a liquid, but it can also be a gas or an ion. A solute can be either organic or inorganic in nature. In a solution, the solute is the component that is present in the lesser amount; the other component is the solvent. A solution is formed when the solute is dissolved in the solvent. The amount of solute in a solution is typically measured in terms of molarity, which is defined as the number of moles of solute per liter of solution.

As the concentration of the solute increases, the boiling point and freezing point of the solution will both increase. This is because the solute particles interfere with the intermolecular attractions of the solvent particles, making them less effective and thus allowing the solvent particles to move more freely and at a higher temperature.

To learn more about solute
https://brainly.com/question/23946616
#SPJ4

The correct option is O calcium

What are all the products created when the hydronium ion and limestone (CaCO3) react? In water, hydrogen ions interact with limestone (CaCO 3). Water always contains them since it goes through autoprotolysis: H + (aq) + OH - = H 2 O (l) (aq) Limestone will react and erode more readily the more acidic the water is.

When limestone is heated (calcined), it produces carbon dioxide and calcium oxide (quick lime). When this CaO, or calcium oxide, is combined with water, lime water (or calcium hydroxide), which releases heat, results. An EXOTHERMIC REACTION has occurred. When limestone and water are together, nothing happens. How does calcite purify water?

To learn more about calcium please click on below link

https://brainly.com/question/29597119

#SPJ4

Cupid has two sets of arrows instead of simply one. One with a lead or silver blunted tip to make someone fall out of love or even despise a person, and one with a barbed golden tip to make people fall in love.

One of Cupid's arrows, or darts, has a pointed tip made of gold, and the other has a blunt lead tip. A person struck by a golden arrow experiences intense desire, whereas a person struck by a lead arrow experiences aversion and just wants to flee.

one of the love-inspiring arrows that Cupid is said to shoot from his bow, striking the target and making them fall in love.

To know more about Cupid visit:-

https://brainly.com/question/13668214

#SPJ4

The environmental scientist which is likely to study the effects of chemical spills on the environment is: B. Toxicologist.

A toxicologist is a type of scientist with a strong understanding of the effects of substances on humans, other living organisms, and the environment. Toxicologists are divided into three major subdivisions:

Learn more about toxicology here https://brainly.com/question/24442473

#SPJ4

The concentration of hydrogen ions inside the intermembrane space is higher than within the matrix as a result of the pumping by hydrogen ions through the innermost membrane.

The area between two or maybe more membranes would be known as the intermembrane gap.

The matrix is much less acidic than that of the intermembrane gap. H+ is transferred from of the matrix towards the intermembrane space through the electron transport chain.

Lipid molecules form a double layer that makes up biological membranes.

The term "molecule" refers to a grouping of two as well as more elements.

MgO, for instance, would be a molecule with the chemical composition 1 atom of magnesium and 1 atom of oxygen.

Learn more about intermembrane space here :-

https://brainly.com/question/13978769

#SPJ4

An atom of chlorine have 5 atomic orbitals in which each at least one electron is present.

Atomic orbitals are mathematical functions that give knowledge into the wave idea of electrons (or sets of electrons) that exist around the cores of atoms. In the fields of quantum mechanics and nuclear hypothesis, these numerical capabilities are much of the time utilized to decide the likelihood of tracking down an electron (having a place with a molecule) in a particular district around the core of the particle.

It is critical to take note of that the term 'atomic orbital' can likewise be utilized to allude to the actual space or actual locale around an atom's core wherein the likelihood of a particular electron being available is greatest. The presence of an electron in such a locale is anticipated by the numerical type of the atomic orbital.

Electronic configuration of chlorine is  1s²,2s²,2p⁶ 3s² 3p⁵.It means 2 electrons are present in 1 s orbitals,2 electrons are present in 2s orbitals ,6 electrons are present in 2p orbital,2 electrons are present in 3s orbitals and 5 electrons are present in 3p orbitals.

Hence,5 atomic orbitals contains at least one electron.

To know more about atomic orbitals, visit here:

https://brainly.com/question/29561958

#SPJ4

(Complete question) is:

an atom of chlorine has the electron configuration [ne] 3s² 3p⁵. determine how many atomic orbitals in this atom are occupied by at least one electron

939.067MeV is the energy required to extract a proton from a nucleus.

△m= mass of nucleus − mass of proton

= (mass of neutron + mass of proton) - mass of proton

= mass of neutron

= 1.008665amu

E=1.008665 X 931=939.067MeV

After absorbing a neutron, heavy nuclei can occasionally decay and turn into radioactive nuclei. A proton would ultimately be lost, along with perhaps one or two neutrons.

For C12 and C13, the binding energy per nucleon is 7.68 MeV and 7.47 MeV, respectively. The power needed to take a neutron out of C13 is Not to worry! Our team has your back.

To know more about nucleus visit:-

https://brainly.com/question/17704494

#SPJ4

The major product  of the chemical equation of 1,4-dibromobutane and sodium sulfide is thiolune and sodium bromide.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ4

[tex]IBr^{-}_{2}[/tex] has 3 pairs of non-bonding electrons as shown in the picture.

[tex]IBr^{-}_{2}[/tex] has a linear structure and includes three lone pairs of electrons in an equatorial location. This decreases the lone pair repulsions, and the two bromine atoms are in an axial position. Therefore, the structure  [tex]IBr^{-}_{2}[/tex] has a linear organization. [tex]IBr^{-}_{2}[/tex] has an iodine atom that possesses two bond pairs as well as three lone pairs of electrons. Both bond pairings are formed using atoms containing two bromines.

To know more about electrons click on the link below:

https://brainly.com/question/13998346

#SPJ4