Answer:
See explanation
Explanation:
Given the reaction;
3N2(g) + H2(g) = 2N3H(g).
We know that when a constraint is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.
In this case, when the pressure is increased eightfold, the equilibrium position will shift towards the direction where there is the least total volumes.
In this particular reaction, the forward reaction has the least total volumes and is favoured by an eightfold increase in pressure.
Hence, when the pressure is increased eightfold, more N3H(g) is obtained.
g What is the relationship between the moles of the limiting reagent and the change in temperature (i.e. directly proportional or indirectly proportional)
Answer:
number of moles is inversely proportional to the Temperature
Explanation:
As we know
PV = nRT
where P is the pressure
V is the volume
n is the number of moles
R is the gas constant
and T is the temperature
If we see the equation, we can find that n is inversely proportional to the Temperature
Who used scientific investigations to study atoms?
Check all that apply.
Dalton
Democritus
Rutherford
Thomson
Answer:
Rutherford used scientific investigation to study atoms.
Scientist who used scientific investigations to study atoms is Rutherford.
What are atoms?Atoms are the basic fundamental or functional unit of any substance present in the nature.
Rutherford is also known as the father of nuclear physics and he did scientific investigation on the massive part of atom called nucleus he discovered that there are two types of radiation, coming from the uranium atom are alpha and beta particles.
Scientific investigation is a method in which scientist will study, perform and observe results for the experiment.
Hence Rutherford used scientific investigation.
To know more about Scientific investigation, visit the below link:
https://brainly.com/question/17216882
Question 18 (Multiple Choice Worth 2 points)
(12.02 LC)
What type of adaptation relates to the stages of growth and reproduction of plants?
Inherited trait
O Life cycle difference
O Learned behavior
O Physical characteristic
Answer:
the answer should be Life Cicle Difference.
Answer: Option (D) Is the correct Life cycle difference
Explanation: Hope it helps!
Good luck!!!
What are the safety procedures for nuclear accidents nowadays?
Explanation:
Take shelter in a hard wall building
Close doors and windows cut off ventilation
best way to hump girls
Answer:
When they're sleeping
Explanation:
After they've been drugged
Difference between brain and spinal cord
Pls help
16. A solution is made by dissolving 25 g of NaCl in enough water to make 1.0 L of solution. Assume the density of the solution is 1.0 g/cm3. Calculate the molarity and molality of the solution.
Answer:
The molarity will be "0.43 M" and molality will be "0.43 m".
Explanation:
Given that:
mass of NaCl,
= 25 g
Volume of solution,
= 1 L
Density of solution,
= 1 gm/cm³
Now,
The weight of solvent will be:
= [tex]Volume\times density[/tex]
= [tex]1\times 1[/tex]
= [tex]1 \ kg[/tex]
The mole of NaCl will be:
= [tex]\frac{mass}{Molar \ mass}[/tex]
= [tex]\frac{25}{58.44}[/tex]
= [tex]0.43[/tex]
hence,
The molarity will be:
= [tex]\frac{number \ of \ mole}{Volume \ of \ solution}[/tex]
= [tex]\frac{0.43}{1}[/tex]
= [tex]0.43 \ M[/tex]
The molality will be:
= [tex]\frac{mole \ of \ solute}{Weight \ of \ solvent}[/tex]
= [tex]\frac{0.43}{1}[/tex]
= [tex]0.43 \ m[/tex]
In the reaction between CH4 and O2, if 25.0 g of CO2 are produced, what is the minimum amount of each reactant needed?
PLS HELP
Answer:
25 gram
Explanation:
the minimum amount of the reactant needed is equal to the mass of the product because of the law of conservation of mass ok
PLSS HELPP ME i dont knowww
Answer:
non polar. polar ionic substance
If the half-life of Carbon-14 is 5700 years, how many years would it take a sample to decay from 1 gram to 31.3 mg
Answer:
28500 years
Explanation:
Applying,
A = A'([tex]2^{x/y}[/tex])............... Equation 1
Where A = Original mass of Carbon-14, A' = Final mass of carbon-14 after decaying, x = total time, y = half-life.
From the question,
Given: A = 1 g, A' = 31.3 mg = 0.0313 g, y = 5700 years.
Substitute these values into equation 1
1 = 0.0313([tex]2^{x/5700}[/tex])
[tex]2^{x/5700}[/tex] = 1/0.0313
[tex]2^{x/5700}[/tex] = 31.95
[tex]2^{x/5700}[/tex] ≈ 32
[tex]2^{x/5700}[/tex] ≈ 2⁵
Equating the base and solve for x
x/5700 ≈ 5
x ≈ 5×5700
x ≈ 28500 years
A water bottle is cooled to -115c. What is the new pressure
Answer:
129
Explanation:
Write out the steps to finding the Empirical Formula.
How many grams are in 0.375 mol LiBr? (MM LiBr=86.85 g/mol)
O 32.6 g
O 0.00315 g
O 0043 g
O 86.8 g
Answer:
32.57g
Explanation:
mass = mole x molar mass
mass of LiBr = 0.375 x 86.85
mass = 32.57g
What is the molality of a solution containing 15 g NaCl dissolved in 50 g of water
Answer:
cdjkekendnekekekeknenwkwkwkwnrnrnrjejjwjwksnsjnrheifjfuufjeenenej
What is the pH if the [H+] concentration is 3 x10^-13
Answer:
pH = 12.52
Explanation:
Given that,
The [H+] concentration is [tex]3\times 10^{-13}[/tex].
We need to find its pH.
We know that, the definition of pH is as follows :
[tex]pH=-log[H^+][/tex]
Put all the values,
[tex]pH=-log[3\times 10^{-13}]\\\\pH=12.52[/tex]
So, the pH is 12.52.
If 6.75 g of NaOH are dissolved in 50.00 g of water and the temperature increases from 20.5°C to 47.8 °C.
a. Is this an example of an endothermic or exothermic reaction?
b. What is the q for the reaction? (Remember since the NaOH dissolves in water add the masses to get the m)
c. How many moles of NaOH are dissolved?
d. What is the ΔH for the reaction?
Explanation:
Have a good luck with ur exam
4. Which should be done after a volcanic eruption?
A. Go to your neighbor.
B. Prepare your emergency kit.
C. Ignore what is happening around.
D. Stay in the evacuation center until it is safe to return.
5. Which is NOT true about volcanic preparedness?
A. Make a plan.
B. Prepare an emergency kit.
C. Cover your nose with a damp cloth.
D. Do not follow the instructions of the authorities.
Answer:
4. D sounds like the best option.
5. D is the correct answer.
Explanation:
You're Welcome
How many isomers are there with the following descriptions? Alcohols with the formula Answer Two Bromoalkanes with the formula Answer
Answer:
Three isomers
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
Explanation:
Complete question
How many isomers are there with the following descriptions?
a) Alcohol with formula C3H8O
Solution
There are total 3 carbon atoms in this alcohol. Hence, there will be three isomers of Alcohol with formula C3H8O .
The three isomers will comprise of alcohol group (OH) attached to the three carbon atoms one by one.
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
ill give brainliest :D
how many grams of kcl are produced from 11.5 grams?
Answer:
approximately 15.1 grams.
Explanation:
The key to chemistry is to change everything to moles. Then when you have the answer in moles change the answer back to grams, liters, or whatever you want.
change 25 grams of potassium chlorate to moles.
calculate the gram molecular mass of potassium chlorate.
Chlorate is Cl with 3 oxygens. ate = saturated. Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron.
1 K x 39 grams/mole
+1 Cl x 35.4 grams/ mole
+3 O x 16 grams/ mole
= 122.4 grams / mole Potassium Chlorate
25
122.4
= moles.
2.05 moles of Potassium Chlorate.
There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride.
2.05 moles of Potassium Chlorate will produce 2.05 moles of Potassium Chloride.
Find the gram molecular mass of Potassium Chloride.
1 K x 39 = 39
+1 Cl x 35.4 = 35.4
= 74.4 grams / mole.
2.05 moles x 74.4 grams/ mole = 15.2 grams
Answer:
idont know nalimotan ko hhhh...
4. Suppose in the first part of the experiment you did not heat strong enough to
decompose the potassium chlorate, how would this affect your result?
when you strongly heat the potassium chlorate it leaves oxygen if you'll not heat it strongly to decompose it the oxygen would not release and the compound will remain thermally unstable.
Heating of Potassium Chlorate results into decomposition of Potassium Chloride and Oxygen gas.
When KClO₃ is heated strongly, it breaks down, releasing oxygen gas and leaving behind a thermally stable (i.e., heat-insensitive) solid residue of an ionic potassium compound.
If enough heat is not provided to potassium chlorate then it will not decompose into its substituent products and also some of the potassium chloride product splattered out of the crucible during the heating process.
Learn more:
brainly.com/question/12959023
What are 3 different ways we can preserve our ecosystem and what makes your 3 ways effective?
Answer:
1. Stop throwing trash and bottles in lakes because it can have our animals live longer and not have issues
2. Reducing the number of bags you use from the store because they can end up being on the ground and cause plenty of damage around us
3. probably trying not to having fires because there is alot of problems that are happening like the wildfires in californa which is leading to our animals and trees dying
hope this helps
have a good day :)
Explanation:
How many total carbon atoms are in the structure 2 methyl, 3, 4 diethyl decane?
12
15
14
10
Answer:B
15 carbon atoms
What is the temperature of 0.750 mol of a gas stored in a 6,050 mL cylinder al 221 atm?
atm
Use and
molek
5.24K
138 K
246 K
Answer:
T = 246 K
Explanation:
Given that,
Number of moles, n = 0.750 mol
The volume of the cylinder, V = 6850 mL = 6.85 L
Pressure of the gas, P = 2.21 atm
We need to find the temperature of the gas stored in the cylinder. We know that,
PV= nRT
Where
R is gas constant
T is temperature
So,
[tex]T=\dfrac{PV}{nR}\\\\T=\dfrac{2.21\times 6.85}{0.75\times 0.0821}\\T=245.85\ K[/tex]
or
T = 246 K
So, the temperature of the gas is equal to 246 K.
Which compounds are most likely ionic? compounds A and B O compounds B and C compounds C and D O compounds D and A
Answer:
compounds D and A
Explanation:
The ionic compound can conduct electricity therefore, the compounds A and D are most likely ionic. Therefore, option (4) is correct.
What are ionic compounds?Ionic compounds can be defined as crystalline solids produced by closely packed ions with opposite charges. The formation of an Ionic compound takes place when metal reacts with non-metal.
In ionic compounds, the ions of the compound are generally linked together by ionic bonds. The ions of an atom are formed by gaining or losing electrons in order to get the noble gas electronic configuration.
In a reaction, the metals are generally electropositive so they can lose electrons to complete their octet while non-metals will gain electrons from the metals to complete their octet.
Ionic compounds can conduct electricity in a molten state and aqueous solution because then they have free ions that can move from one place to another to conduct an electric current.
Learn more about ionic compounds, here:
brainly.com/question/17217225
#SPJ6
calculate the molecular mass of sodium trioxocarbonate (iv) decahydrate. hints (H= 1, C=12, O=16, Na=23
Given :
A compound sodium trioxocarbonate (iv) decahydrate.
To Find :
The molecular mass of sodium trioxocarbonate (iv) decahydrate.
Solution :
We know, molecular formula of sodium trioxocarbonate (iv) decahydrate is :
Na₂CO₃.10H₂O
Now, we can calculate its molecular mass :
M = ( 2 × 23 ) + 12 + ( 3 × 16 ) + 10 × ( 1 × 2 + 16)
M = 46 + 12 + 48 + ( 10 × 18 )
M = 286 gram/mol
Hence, this is the required solution.
A 45-year-old woman comes to a clinic with complaints of morning stiffness in her ankle joints, worse on rising in the morning and improving during the day. Her discomfort is responsive to aspirin. She has also been fatigued and weak. During the last week, she has noticed that her wrist and ankle joints on both sides of her body are also painful and swollen. Blood is drawn to test for rheumatoid factor and antinuclear antibody. Synovial fluid is aspirated and analyzed. Results from analysis of the synovial fluid rule out crystal deposition diseases, such as gout and pseudogout, and no infectious microorganisms are seen.
Required:
a. What can be the possible cause of a false-positive RF assay?
b. Do the patient's clinical symptoms and laboratory results support a diagnosis 5. If so, what diagnosis would be the first choice, and why?
Answer:
In all the patients with rheumatoid arthritis RF is not present. It can also be witnessed in patients with conditions like hepatitis, bacterial endocarditis, and tuberculosis. Some of the reasons that can also produce false-positive results for RF assay are lipemic, hemolyzed, or heavily contaminated serum, other rheumatic diseases like systemic lupus erythematous, reading test results post the specified time of two minutes, and due to some of the chronic infectious diseases like hepatitis, tuberculosis, and syphilis.
b. The symptoms of the oatient like inflammation and pain in joints and the results of the lab indicate that the synovial fluid is drying and formation of crystal is taking place. These are the conditions that suggests the existence of rheumatoid arthritis.
c. In the given case, the first choice diagnosis would be the blood test that would show the presence of anti-CCP antibodies and the drying of synovial fluid. The presence of anti-CCP antibodies results in wear and tear in the joints, thus showing the diseased conditions.
Which of the following statements is FALSE. Select one: A. Two of the statements are false. B. In the synthesis of aspirin, the main impurities are salicylic acid and acetic acid. C. Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin. D. In the analysis of aspirin, the greater the amount of salicylic acid impurity in the aspirin, the smaller the amount of NaOH needed for the hydrolysis of aspirin. E. If the crude aspirin is not entirely pure, the temperature range at which it melts will be larger than pure aspirin.
Answer:
Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin.
Explanation:
The presence of impurities in a sample lowers the melting point of the impure substance. Hence the melting point of an impure substance is always less than the melting point of the corresponding pure substance.
Bearing this in mind, the statement "Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin." is found to be false since impure substances tend to have a slightly lower melting point than the pure substance, and a broader melting temperature range.
10. The lithium-ion in a lithium-ion battery moves from one side to the other by
A. moving through the cathode.
B. moving through the anode.
C. passing through the separator.
D. passing through the device.
5. Calculate the number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride.
To Find :
The number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride.
Solution :
We know, 1 mole of any element/compound contains [tex]6.022 \times 10^{23}[/tex] number of atoms/molecules.
So, Number of molecules in 0.32 mol are :
[tex]n = 0.32 \times 6.022 \times 10^{23}\\\\n = 1.93 \times 10^{23}[/tex]
Therefore, number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride are [tex]1.93 \times 10^{23}[/tex].
plz help me asap i need this plz
Why is it sometimes not practical to use to scale models when representing objects in space?