Answer:through the conduction from magma to water and rocks
Explanation:
Hi! My responsibility is to add and protection to plant cells. what i am
Atmosphere
B
Ocean
Land
с
Which arrow or arrows represents a change of state from a liquid to a gas caused by the
sun's energy?
A. arrow A
B. arrow B
C. arrow A and arrow B
D. arrow B and arrow C
In the laboratory you dissolve 12.7 g of silver fluoride in a volumetric flask and add water to a total volume of 125. mL. What is the molarity of the solution?
Answer:
Molarity = 2.4 M
Explanation:
Given data:
Mass of silver fluoride = 12.7 g
Volume of water = 125 mL (125 mL× 1 L /1000 mL = 0.125 L)
Molarity of solution = ?
Solution:
Number of moles of silver fluoride:
Number of moles = mass/molar mass
Number of moles = 12.7 g/ 41.98 g/mol
Number of moles = 0.30 mol
Molarity:
Molarity = number of moles of solute / volume in L
Molarity = 0.30 mol / 0.125 L
Molarity = 2.4 M
in the reaction A+B = C+D if B is the excess what is the limiting reactant
Explanation:
Determining the Limiting Reagent
One reactant (A) is chosen, and the balanced chemical equation is used to determine the amount of the other reactant (B) necessary to react with A. If the amount of B actually present exceeds the amount required, then B is in excess, and A is the limiting reagent.
what is a similar math problem to the calcium and water equation
Answer: Calcium is a metal and a typical reaction of a metal with water will be as follows: ... the chemical reaction for calcium and water will be: [Word Equation] Calcium + 48.
Explanation: Please Please mark me as brainliest!
Put the following metals in order of reactivity.
Iron, potassium, copper, zinc, lead, calcium, magnesium, sodium, gold
Most reactive
Least reactive
Complete the equations
metal + oxygen → …………………….
metal + water → ……………………. + …………………….
metal + acid → ……………………. + …………………….
What is formed when magnesium burns in air?
…………………….…………………….…………………….…………………….
What happens when copper is put into a beaker of water?
…………………….…………………….…………………….…………………….
How do you test for hydrogen gas?
…………………….…………………….…………………….…………………….
What is formed when sodium reacts with hydrochloric acid?
…………………….…………………….…………………….…………………….
How should metals more reactive than carbon be extracted from their ores?
…………………….…………………….…………………….…………………….
Why is gold used in jewelry?
…………………….…………………….…………………….…………………….
What is the rule for displacement reactions?
…………………….…………………….…………………….…………………….
Tick which reactions would happen
copper
Magnesium
zinc
copper sulfate
Magnesium
sulfate
Zinc Sulfate
Using the reactions from Q10. Choose 1 reaction you’ve ticked and explain why it happens. Choose 1 reaction you haven’t ticked and explain why it doesn’t happen.
…………………….…………………….…………………….…………………….
…………………….…………………….…………………….…………………….
…………………….…………………….…………………….…………………….
…………………….…………………….…………………….…………………….
Write word and symbol equations for the first reaction from Q11.
…………………….…………………….…………………….…………………….
…………………….…………………….…………………….…………………….
Answer: copper, zinc, lead, magnesium, potassium, sodium, iron, gold.
Explanation:
How do you shift realities?
I’ve been trying for weeks now
Answer:
1. learn how to script
2. be in a good state of mind
3. drink water water warer
4.search for yt tutorials
Explanation:
What is the volume of a 492.2g sample of Kr gas?
0.007601 L
131.6 L
5.870 L
21.97 L
Answer:
131.6 L
Explanation:
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, the correct option is option B that is 131.5l. There is no force of attraction between the particles.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. Ideal gas is a hypothetical gas. Vanderwaal behave as ideal gas at high temperature and low pressure.
Mathematically,
PV=nRT
where,
P = pressure=1 atm
V= volume=?
n =number of moles=given mass/ molar mass
= 492.2/ 83.79
= 5.87 moles
T =temperature = 273K
R = Gas constant = 0.0821 L.atm/K.mol
1× V = 5.87 × 0.0821 L.atm/K.mol × 273 K
V =131.5l
131.5l is the volume of a 492.2g sample of Kr gas.
Therefore, the correct option is option B that is 131.5l.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ6
PLEASE HELP!! ILL MARK BRAINLIST!!
help I'm giving you a lot of points and do not put random or crazy stuff the real question
You are trying to design a homemade ice pack. As you select the chemicals for this reaction, should you choose an endothermic reaction or an exothermic reaction? Why?
Answer:
Endothermic
Explanation:
Because Endothermic is cold and exothermic is hot and if you are using an ice pack it would be Endothermic and if you were using something that was hot it would be exothermic
At what temperature will 41.6 grams of nitrogen gas (N2) exert a pressure of 1 point
1.07 atm in a 20.0 L cylinder?
Answer:
The temp is 176k
Explanation:
What might the student have done that caused this
error? List all possible causes.
Answer:
The capillary tube was too close to the bottom of the beaker.
The ruler may have moved.
Water got into the capillary tube.
The temperature was not allowed to equilibrate in the 2-4 minutes.
Explanation:
Calculate the mass of 4.55x1024 molecules of sucrose
Answer:
2584 g
Explanation:
The molecular formula for sucrose is C₁₂H₂₂O₁₁, which means its molar mass is 342.3 g/mol.
First we convert molecules into moles by using Avogadro's number:
4.55x10²⁴ molecules ÷ 6.023x10²³ mol/molecules = 7.55 molNow we convert moles of sucrose into grams, using its molar mass:
7.55 mol * 342.3 g/mol = 2584 gplease help PLSSSS
2020020200
Answer:Well the water molecules attract each other, and the oil molecules stick together.
sorry number two im not sure sorry:(
Explanation:
What did Antoine Lavoisier’s experiments demonstrate?
A. Atoms always split into pairs during a chemical change.
B. Mass is neither lost nor gained during a chemical change.
C. Matter can be created during a chemical change.
D. Energy is neither lost nor gained during a chemical change.
TOMMY (persistently but a little intimidated by the crowd) It's always that way, in every story I ever read about a ship landing from outer space. —The Monsters Are Due on Maple Street, Rod Serling What scientific fact is Tommy’s theory based on? Meteors can do some crazy things. Spaceships often land on Earth. Technology makes space travel possible. Meteors can move people from planet to planet.
Answer:
Technology makes space travel possible.
Explanation:
bc the guy above me is wrong I had to guess and I got it right
Answer:
Technology makes space travel possible.
Explanation:
got it right on edge
A gas has a volume of 250.0 liters at 17.0 °C and 3.00 atm of pressure. what volume must the gas be increased for the gas to be at STP conditions?
Answer:
0.706 L (Liters)
Explanation:
P1V1 = P2 V2 3 atm 250.0 mL = 1 atm X
T1 T2 290 K 273 K
706 mL = X
According to the question,
Pressure,
Initial, [tex]P_1 = 3 \ atm[/tex]Final, [tex]P_2 = 1 \ atm[/tex]Temperature,
Initial, [tex]T_1 = 17^{\circ} C[/tex] or, [tex]290 \ K[/tex]Final, [tex]T_2 = 273 \ K[/tex]Volume,
Initial, [tex]V_1 = 250 \ L[/tex]Final, [tex]V_2 = \ ?[/tex]By using the Boyl's and Charl's combination law, we get
→ [tex]\frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2}[/tex]
or,
→ [tex]V_2 = \frac{P_1 V_1 T_2}{T_1 P_2}[/tex]
By putting the values, we get
→ [tex]= \frac{3\times 250\times 273}{290\times 1}[/tex]
→ [tex]= 706 \ L[/tex]
Thus the aforementioned answer is right.
Learn more about pressure here:
https://brainly.com/question/19156022
What is genetic variation?
What are the two main types of energy?In an illustration, lines of force are drawn around a magnet to illustrate the magnetic
Which of the following is not a form of precipitation?
A
groundwater
B
balls of hail
C
sleet
D
snowflakes
A.
Reason: cuz i need points noob
5. Solve the following crossword puzzle.
a. Maximum energy generation in India is done using ........ energy.
b. energy is a renewablesource of
energy.
c.Solar energy can be called.... energy.
e. ......... energy of water in dams is used for generation of electricity.
Answer:
I think it is b
Explanation:
Bill stands in a swimming pool and notices that the water around his feet is a lot cooler than the water near the surface which process causes this difference in temperature?
1. convection
2. evaporation
3. radiation
4. conduction
Submit Answer
Answer:
convection
Explanation:
PLEASE HELP ILL EVEN MARK AS BRAINLIEST
Answer:
Cl: -29.272*
Explanation:
The other temperatures go from lowest to highest, H: -423* F, N: -320* F, F: -306.6* F
An object has a volume of 825 cm3 and a density of 13.6 g/cm3. Find its
mass
The mass of an object is the product of its volume and density. The mass of a the object with a volume of 825 cm³ and a density of 13.6 g/cm³ is 11220 g.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of the object = 825 cm³
density = 13.6 g/cm³
Mass = volume × density
m = 825 cm³ × 13.6 g/cm³ = 11220 g
Therefore, the mass of the object is 11220 g.
Find more on density:
https://brainly.com/question/15164682
#SPJ2
Determing Valence Electrons
Use your periodic table to determine the correct number of valence electrons for the elements below
Element
Group Number
Valence
Electrons
Period
Energy Levels
+
Cesium (Cs)
lodine 0
Arsenic (As)
Gallium (Ga)
A process in which substances chemically rearrange to form new substances
Molecule
Energy
Organism
Chemical reaction
Matter
Cellular respiration
Answer:
Chemical reaction
Explanation:
After new substances are formed they can't be reversed to their original state.
How many atoms are there in 3.3 moles of strontium?
Explanation:
Multiply the moles Fe by 6.022×1023 atoms/mol
5. A fireplace fire heating a room on a cold day is an example of what type of heat
transfer? What are the steps of heat transfer?
A. Conduction, fireplace>room
B. Conduction, room>fireplace
C. Radiation, fireplace>room
D. Radiation, room>fireplace
Answer:
I think the answer is C- radiation
Explanation:
If its not C its A Hope this helps forgive me if i'm wrong :/
Answer: C
Explanation: The fire in the fireplace is giving off heat because it doesn't need a medium to travel through.
Which statement correctly compares electric charge with electric current?
A.
They both require a human to make them.
B. Neither require charged particles.
C. They both require a battery and a bulb
D. They both require a movement of charged particles.
Answer:
Your answer would be D) They both require a movement of charged particles
Explanation:
In short terms both the charge and the current are made up of charged particles that are always moving, they constantly move to well... stay charged, if they stopped, then the charge would fade until there is nothing left, and if there is nothing left -it means there would be no electricity to use
~Notify me if you have questions~
Have a nice day and hope it helps!
^ω^
-- XxFTSxX
4. What is the correct surface areas for a 45nm
wide cube?
Answer:
A = 12150 nm²
Explanation:
The side of a cube, a = 45 nm
We need to find the surface area of the cube.
The formula for the surface area of a cube is given by :
A = 6a²
Substituting the value of a in the above formula.
A = 6(45)²
= 12150 nm²
So, the surface area of the cube is 12150 nm²