plz help i’m gonna cry i’m in class rn

There are distinct h1h1 & c13c13 nmr signals for each molecule, which are a.3, b.3, and c2.

All locations in benzene are identical to one another.As a result, all six hydrogen atoms produce just one signal for proton NMR, and all 6 carbon atoms produce just one signal in 13-C NMR.

These substances each produce three signals!Similar to the examples before, we can determine that two carbon atoms are equivalent by looking at the symmetry planes of a molecule.

To know more about compound visit:

https://brainly.com/question/13516179

#SPJ4

The solution can be correctly described as saturated solution.

What is saturated solution?

The chemical solution with the highest amount of a solute dissolved in the solvent is known as a saturated solution.

As clearly observed from the solubility diagram, the maximum amount (approx. 42 g) of KCl can be dissolve in 100g of water at 50°C. No more KCl will be dissolve in water at this temperature.

Saturated solution is a kind of solution that contains the maximum amount of solute being dissolve in solvent at a particular temperature.

Therefore, the solution can be correctly described as saturated solution.

To learn more about saturated solution from the given link.

https://brainly.com/question/2029122

#SPJ4

Acid in lemon juice reacts with metal containers to produce harmful chemicals. As a result, lemon juice is not kept in such containers.

What  is Acid ?

Acidic substances are typically easy to recognise by their sour flavours. A molecule that can donate an H+ ion and keep its energetic favorability even after losing H+ is a basic definition of an acid. Blue litmus paper is known to turn red when exposed to acids.

Bases, on the other hand, have a smooth consistency and a bitter flavour. A base that may dissolve in water is known as alkali. When these substances interact chemically with acids, salts are created. Red litmus has a history of becoming blue on bases.

The definitions of the terms acid and base vary depending on how one chooses to see the properties of acidity and basicity.

Lemon juice has a strong acidic flavor and can react with some metals. Lemon juice can corrode or rust metal when it comes into touch with it. This is so that iron oxide, a new chemical created by the reaction between the metal and the acid in lemon juice, can be formed.

Reddish-brown iron oxide is a less powerful material than pure iron. Iron oxide will keep combining with oxygen in the air over time to coat the metal in a thick film of rust.

Learn more about Acid from given link

https://brainly.com/question/25148363

#SPJ4

The correct formula of the compounds is: H2O,Na2O, and MgO but I don't know if this would help

Ice melting is a physical transformation rather than a chemical reaction. The addition of heat energy causes the phase of ice to transition from solid to liquid during melting. However, there is no chemical reaction taking place while it is melting, therefore the molecular composition remains unchanged.

Endothermic Reaction: An endothermic process is one in which additional heat is needed to complete the reaction. Ice melting is an example.

A physical process called melting or fusing causes a substance to change its phase from a solid to a liquid. This happens when the solid's internal energy rises, usually as a result of the application of heat or pressure raises the material's temperature to the point of melting.

To know more about Endothermic Reaction visit:-

https://brainly.com/question/23184814

#SPJ4

If sodium has 4 neutrons, 3 protons, and 2 electrons, the correct symbol for the ion is: Na⁺.

To write the symbol for sodium ion, we need to examine the number of neutrons, protons, and electrons it has. Generally, a neutral atom has the same number of protons and electrons. It also has the same number of neutrons and protons. This sodium has 3 protons and 2 electrons. Therefore, this ion needs 1 more electron to reach neutrality. Hence, the total charge for the ion is +1 and the correct symbol is Na⁺.

Learn more about the symbol of ion https://brainly.com/question/28562626

#SPJ4

(CH3)2ĊCH2CH3, (CH3)2CHCHCH3, (CH3)2CHCH2CH2,(CH3)2C=CHCH2 is the ranking order of the radicals in decreasing stability

In chemistry, a radical, also known as a free radical, is a molecule that contains one unpaired electron. Most molecules have an odd number of electrons, and the covalent bonds form bonds that hold the atoms together within a molecule are typically made up of pairs of electrons shared by the atomic nuclei connected by the bond. Radical was first used as an adjective in the 14th century, derived from the Late Latin radicalis, which was derived from the Latin radic-, radix, – this means "root." And the first uses of radical are all about literal roots, with the meaning "of, relating to, or going to proceed from a root." The most well-known free radical, oxygen, serves as the foundation for the formation of the majority of free radicals in the body. Oxygen is a naturally unstable molecule

Learn more about stability here:

https://brainly.com/question/10512475

#SPJ4

Answer: The main applications of oxygen in order of importance are: 1) melting, refining and manufacture of steel and other metals; 2) manufacture of chemicals by controlled oxidation; 3) rocket propulsion; 4) medical and biological life support; 5) mining, production and manufacture of stone and glass products.

Explanation:

Answer:

hydrogen gas and chlorine

Explanation:

HCl is a chemical compound and aqueous solution form of HCl is a homogeneous solution

All the following are homogeneous mixtures except hydrogen gas and chlorine gas. Therefore, option A is correct.

A mixture is said to be homogeneous if its composition is constant throughout. Because the dissolved salt is evenly distributed throughout the whole salt water sample, the salt water described above is homogeneous.

It is single in composition throughout. There is only one phase of matter observed in a homogeneous mixture.

In an aqueous solution of hydrogen chloride gas, water serves as the solvent and the solute, respectively. Hence, hydrogen chloride is a homogeneous mixture rather than a compound.

When hydrogen chloride is dissociated and solvated in water to create hydrochloric acid, it counts as a homogeneous mixture.

Thus, option A is correct.

To learn more about the homogeneous mixture, follow the link;

https://brainly.com/question/24898889

#SPJ2

A group is the column in the periodic table of chemical elements while the period is the row in the periodic table of the elements.

The electron configuration an element describes how electrons are distributed in its atomic orbitals. The atomic number of the element is used.

According to this question;

Titanium is in group 4 and period 4 of the periodic table while Argon is in group 18 and period 3.

Learn more about groups and periods at: https://brainly.com/question/1995318

#SPJ1

Amygdalin is a carbohydrate  which contains sugar  glucose and glycoscidic linkage that connects the sugars is 1.5'.

A carbohydrate is defined as a bio-molecule which consists of carbon,hydrogen and oxygen atoms which are usually in the ratio of 2:1 with the empirical formula C[tex]_n[/tex](H₂O)[tex]_n[/tex].

This term is most commonly used in biochemistry as a synonym of saccharide which is a group of sugars, starch and cellulose.

They perform various functions in living organisms. They serve as an energy source and as well as structural components . They are a key component in providing nutrition and are found in wide variety of natural as well as processed foods.

Learn more about carbohydrates,here:

https://brainly.com/question/14614055

#SPJ4

Nucleotide identifies the part of the DNA segment labeled as X in the given image.

Nucleotides are organic compounds composed  of phosphate and a nucleoside and are nitrogen containing base.

RNA is often single-stranded, unlike DNA. Instead of the deoxyribose present in DNA, the backbone of an RNA molecule is made up of alternating phosphate groups and the sugar ribose.

They similarly Consists of the following in RNA :

To know more about Nucleotides visit

https://brainly.com/question/16308848

#SPJ1

The solution by dividing the number of moles of urea by the volume of the solution 0.637 M.

Molarity is a unit used to measure the concentration of a solution. It is defined as the number of moles of a solute per liter of a solution.

The molarity of a solution can be calculated by dividing the number of moles of solute by the volume of the solution. In this case, the solute is urea (NH2CONH2) and the volume of the solution is 203 grams of water.
To calculate the molarity of the solution, we first need to calculate the number of moles of urea present in the solution. This can be done by using the formula:
Moles of urea = (mass of urea (g))/(molecular weight of urea (g/mol))
Therefore, the number of moles of urea present in the solution is:
Moles of urea = (7.78 g)/(60.06 g/mol) = 0.129 moles
Now, we can calculate the molarity of the solution by dividing the number of moles of urea by the volume of the solution (in liters):
Molarity = (0.129 moles)/(0.203 liters) = 0.637 M

To learn more about molarity
https://brainly.com/question/14469428
#SPJ4

The final pressure in the bottle for a monatomic gas is 1.20*10^3 Pa.

Given that,

lnitial temperature T = 328 K

Pressure P = 1.606 *10^5 Pa

After the gas expands adiabatically,

P' = 1.203 * 10^5 Pa

Temperature = T'

[tex]P^{f} = P' * (P'/P)^{1-gamma/gamma} \\P^{f} = P^{1/gamma}* P^{gamma-1/gamma}\\[/tex]

For monatomic gas (CV, m = 3R/2 , gamma = 5/3),

[tex]P^{f} = (1.203*10^5)^{3/5}*(1.606*10^5)^{(5/3-1)/5/3} \\ = 1117.27 * 116.59\\ = 1.30 * 105 Pa[/tex]

Part B:

For diatomic gas ( CV, m = 5R/2 , gamma = 7/5)

[tex]P^{f} = (1.203*10^5)^{5/7}*(1.606*10^5)^{(7/5-1)/7/5} \\P^{f} = 1.20*10^{3}Pa[/tex]

To know more about the Pressure, here

https://brainly.com/question/1367741

#SPJ4

y = 2x + 1

y = 3x – 1

these two are the example of functions.

Functions

A function is defined as a relation between a set of inputs having one output each. In simple words, a function is a relationship between inputs where each input is related to exactly one output.

Every function has a domain and codomain or range. A function is generally denoted by f(x) where x is the input. The general representation of a function is y = f(x).

An example of a simple function is f(x) = x2. In this function, the function f(x) takes the value of “x” and then squares it. For instance, if x = 3, then f(3) = 9.

Learn more about function here :-

https://brainly.com/question/23919020

#SPJ4

The strength of oxoacids increases as the number of oxygen atoms increases. Therefore, the strongest one is HBrO₄ >HBrO₃> HBrO₂> HBrO.

Oxoacids are inorganic acids containing oxygen atoms. Group 15 elements such as phosphorus, groups 16 elements such as sulfur, and halogens forms oxoacids.

The strength of oxoacids depends on the number of oxygen atoms and possible resonating structures. The more the number of possible resonating structures the more will be the strength.

Therefore, the order  strength of the oxoacids of Br is as follows:HBrO₄ >HBrO₃> HBrO₂> HBrO.

To find more on oxoacids, refer here:

https://brainly.com/question/28306026

#SPJ4

Your question is incomplete. But your complete question is as follows:

Arrange the oxoacids of bromine according to strength. HBrO, HBrO2, HBrO3, HBrO4.

The compound's mole ratio in a laboratory setup is 3125.12 g/mol, according to the statement.

Water that is completely free of ions is said to be pure. This could conduct electricity as a result. The inclusion of ions in the mixture allows the solution to carry an electric current when other substances, such as ionic compounds, are dissolved in water.

Osmotic pressure is given by;

π = C * R * T

∵ 760 mmHg = 1 atm

10.3 mmHg = 1 * 12.2/760 atm

= 0.016 atm

π = no. of moles * R * T/volume (L)

π = Weight (g) * R * T / Molar mass * V (L)

0.016 atm = 2.494 * 0.082 L atm K⁻¹ mol⁻¹ * 298 K/ M.W * 195 * 10⁻³

M.W = 3125.12 g/mol

Consequently, the compound's molar mass is 3125.12 g/mol.

To know more about Nonelectrolyte visit:

https://brainly.com/question/29771118

#SPJ1

Lewis dot structures, also known as electron dot structures, are diagrams that depict the chemical bonds that exist between atoms in a molecule. They also show the total number of lone pairs in each of the atoms that make up the molecule.

A Lewis Electron Dot Formula has one dot for each valence electron and the symbol of the element. The stages for articulating the electron dot formula are listed below. Make a skeletal structure with only the element symbols that shows a realistic bonding pattern.

Pick up every two electrons from each atom and simply throw them into a fictitious container known as an electron pot. To determine the number of bonds, use the N - A = S equation.

Learn more about Lewis here;

https://brainly.com/question/15570523

#SPJ

Answer: Option c

Explanation:

1) The energy level of the electron

2) The symbol is n

3) The shells correspond to the energy levels

4) The 4th shell has more energy than the 3rd shell

We know that the term quantum number has to do with the position of the electron in the atom. According to the Bohr model of the atom, the electrons that are found in the atom are said to have a specific energy and the electron can move from a lower to a higher energy level by the absorption of energy.

Given the fact that the principal quantum number can also be designated as energy levels or shells, we know that all the electrons that can be found in the atom are said to be classified into certain specific principal quantum levels.

Thus, when we have electrons in an atom, the most basic quantum number is the principal quantum number.

Learn more about quantum numbers:https://brainly.com/question/16977590

#SPJ1

The balanced chemical equation is HCl + NaOH2 ---->  NaCl2 + H2O. This is double displacement reaction.

Chemical formulas and symbols used in chemical equations are used to represent chemical reactions symbolically. The reactant entities are supplied on the left, and the product entities are given on the right, with a plus sign separating the entities in both the reactants and the products, and an arrow pointing in the direction of the products to show the direction of the reaction. Chemical equations can be either mixed, structural, or both. Coefficients are displayed next to the symbols and formulas of the various entities, together with the absolute values of the stoichiometric numbers. A chemical equation is made up of a list of reactants (the chemicals used to start the reaction) on the left, an arrow symbol, and a list of products (the substances created during the reaction) on the right. Each substance is described by its chemical formula, which may be followed by a stoichiometric coefficient, a numerical value. The coefficient describes the number of molecular entities (such as molecules) of that chemical that are engaged in the process. If not stated specifically, the coefficient is + sign separates two or more substances on any side of the equation from one another.

To know more about chemical equation please refer: https://brainly.com/question/28294176

#SPJ4

The first step of an enzymatic reaction is, substrate molecule (S) collide with enzyme(E) and react to form an intermediate compound called the enzyme-substrate (E–S) complex.

Enzymatic catalysis of a reaction between two substrates. The enzyme provides a template on which the two substrates are brought together in the correct position and orientation to react with each other. Enzyme-catalyzed reactions take place in at least two steps.

In the first step, an enzyme molecule (E) and a substrate molecule or molecules (S) collide and react to form an intermediate called an enzyme-substrate (E–S) complex. (This step is reversible, as the complex can dissociate into the original substrate or substrates and the free enzyme.) Once the E–S complex is formed, the enzyme is able to catalyze the formation of the product (P), which is then released from the enzyme surface:

S+E→E–S

To learn more about enzymatic reaction, visit:

https://brainly.com/question/11276447

#SPJ4

Answer:

Cannot, two

Explanation:

The component elements of a compound can only be separated via a chemical reaction that breaks the atomic bonds that bind its molecules. Also, compounds are formed by 2 or more different elements.

The compound cobalt(II) nitrate, Co(NO3)2 is soluble in water. The net ionic equation for the dissociation reaction is Co(NO3)2 (s) = CO2+(aq) + Na3(aq) + PO4-(l).

In general, during the dissociation process in chemistry, molecules (or ionic compounds like salts, or complexes) separate or divide into different entities like atoms, ions, or radicals. This procedure is typically reversible. For instance, the covalent bond between an electronegative atom and a hydrogen atom is broken when an acid dissolves in water due to heterolytic fission, in a reaction which releases a proton (H+) and a negative ion. Dissociation is the antithesis of connection or recombination. Separation of the anions and cations occurs when salts are dissociated by solvation in a solution, such as water. The solvent can be evaporated in order to recover the salt. A substance that has free ions and can be employed as an electrically conducting medium is referred to as an electrolyte. In a weak electrolyte, the majority of the solute does not dissolve, whereas in a strong electrolyte, a higher proportion of the solute dissociates to generate free ions. A weak electrolyte is a material whose solute primarily occurs in solution as molecules (which are referred to as being "undissociated"), with a very tiny amount existing in solution as ions.

To know more about reaction please refer: https://brainly.com/question/29762834

#SPJ4

0 ° F is considered as a safe freezer temperature. Most germs are not killed by freezing, although it does halt them from multiplying.

For more information on freezer temperature kindly visit to

https://brainly.com/question/10940726

#SPJ4

A few alpha particles bounced back from the foil, Rutherford concluded that they were repelled by densely packed regions of positive charge. So the option b is correct.

Rutherford's experiment on scattering of α-particles showed for the first time that the atom has nucleus. He observed that the positively charged α-particles were repelled and deflected by the positive charges in the atom. Rutherford's  named this positively charged portion of atom as nucleus.

As alpha particle is also positively charged and we know that same charges repel each other so   a few alpha particles bounced back from the foil, Rutherford concluded that they were repelled by densely packed regions of positive charge.

To look more about alpha particle click here

brainly.com/question/2288334

#SPJ4

Taking into account the reaction stoichiometry, a mass of 448 grams of N₂ is formed when 48 moles of NaOH reacts.

In first place, the balanced reaction is:

2 NBr₃ + 3 NaOH  → N₂ + 3 NaBr + 3 HOBr

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 3 moles of NaOH form 28 grams of N₂, 48 moles of NaOH form how much mass of N₂?

mass of N₂= (48 moles of NaOH× 28 grams of N₂)÷ 3 moles of NaOH

mass of N₂= 448 grams

Finally, 448 grams of N₂ is formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Answer:

NF[tex]_{4}[/tex]

Explanation:

Mononitrogen tetrafluoride is a simple inorganic compound consisting of a single nitrogen atom bonded to four fluorine atoms. The formula for mononitrogen tetrafluoride is therefore simply NF4.

Six electrons occupy the outermost shell in the electron configurations of the elements in Group 16 of the periodic table, which distinguish them from other elements.

To Learn more About periodic table, refer To:

https://brainly.com/question/15987580

#SPJ1

Starch is a complex carbohydrate that is a polymer of sugar molecules. The sugars in starch have OH bonds that can interact and stick together through a process known as hydrogen bonding.

A hydrogen bond is an electrostatic force of attraction between a hydrogen atom covalently bound to a more electronegative "donor" atom or group and another electronegative atom bearing a lone pair of electrons—the hydrogen bond acceptor—in chemistry.

Hydrogen bonding is not a covalent bond to a hydrogen atom, but rather a type of dipole-dipole attraction between molecules. The attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as an N, O, or F atom and another very electronegative atom causes it. Because hydrogen bonds have the strongest permanent molecular dipoles of any covalent bond, they have the strongest intermolecular forces for covalent compounds.

To learn more about hydrogen bonding, here

https://brainly.com/question/7132123

#SPJ4