The simplified form of the expression is written as 11x³ - 39x -2x²/(x²- 9)(x+ 3)
What are algebraic expressions?Algebraic expressions are simply described as expressions that are composed of terms, variables, constants, factors and coefficients.
These expressions are also made up of arithmetic operations such as addition, multiplication, division, subtraction, etc
From the information given, we have that;
x -2/x + 3 + 10x/x² - 9
Find the lowest common denominator and simplify
(x-2)(x² - 9) + (x-3)(10x) /(x²- 9)(x+ 3)
Now, expand the bracket, we get;
x³ - 9x - 2x² + 10x³ - 30x/(x²- 9)(x+ 3)
collect the like terms of the denominator and that of the numerator, we get;
11x³ - 39x -2x²/(x²- 9)(x+ 3)
Learn more about algebraic expressions at: https://brainly.com/question/4344214
#SPJ1
exploratory data analysis 1. when considering the research question, identify the two variables predictor (explanatory) variable: response variable: 2. use minitab to first create a scatterplot. minitab> graph > scatterplot how would you characterize the association between these two variables? a. linear or nonlinear? b. negative, none, or positive?
Identify the predictor and response variables, then create a scatterplot in Minitab. Characterize the association between the variables as linear or nonlinear and negative, none, or positive.
In exploratory data analysis, the first step is to identify the research question and the two variables of interest. The predictor variable (also known as the explanatory variable or independent variable) is the one that is used to explain or predict the outcome of the response variable (also known as the dependent variable).
After identifying the two variables, one can use software such as Minitab to create a scatterplot of the data. The scatterplot helps to visualize the relationship between the two variables.
To characterize the association between the two variables, we would first determine if the relationship appears to be linear or nonlinear. If the relationship is roughly linear, we would then determine if it is negative (meaning that as one variable increases, the other tends to decrease), positive (meaning that as one variable increases, the other tends to increase), or none (meaning that there is no clear trend).
Learn more about linear or nonlinear.
https://brainly.com/question/31510530
#SPJ4
Draw triangle PQR where PQ has length 4 cm PR has length 3.5 cm and angle RPQ is 32° 
Find the exact value of x
Answer:9
Step-by-step explanation:
NEED HELP FAST PLEASE HURRY INDEED OF HELP
Answer:
Step-by-step explanation:
Hopefully this is right.
Area = (pi)r²
Which is pi times the the radius squared
The radius is 2, so 2² is 4, So we multiply 3.14, which is pi, by 4.
Multiply 3.14 by 4, and the answer is 12.56, the question says round to the nearest tenth, so the final answer will be 12.6
My math teacher back in 7th grade gave us this sentence to help us memorize the equations.
Cherry Pie Delicious (C=(pi)d), Apple Pie Are Too (A=(pi)r²)
Do the same with the other two questions, and the answer for question two will be 3.14, rounded to the nearest tenth will be 3.1
Question three do the same as well, and the answer will be 660.185, rounded will be 660.2
Hope this helps!
The coordinates of P are (-3, 8) and the coordinates of Q are (9, -2).
Find the equation of the line parallel to PQ that passes through the point (6, -1).
The equation of the line parallel to PQ that passes through the point (6, -1) is y = (-5/6)x + 4.
What is the equation of the line parallel to PQ that passes through the point (6, -1)?The formula for equation of line is expressed as;
y = mx + b
Where m is slope and b is y-intercept.
Given that: the coordinates of P are (-3, 8) and the coordinates of Q are (9, -2).
We can find the slope of line PQ.
m = (y2 - y1) / (x2 - x1)
Where (x1, y1) and (x2, y2) are the coordinates of points P and Q, respectively.
m = (-2 - 8) / (9 - (-3))
m = -10 / 12
m = -5/6
Since we want the equation of a line parallel to PQ, it will have the same slope.
Hence, the equation of the line can be written as:
y - y1 = m(x - x1)
where (x1, y1) is the point (6, -1) and m is the slope we found earlier.
Plugging in the values, we get:
y - (-1) = (-5/6)(x - 6)
y + 1 = (-5/6)x + 5
y = (-5/6)x + 5 - 1
y = (-5/6)x + 4
Therefore, the equation of the parallel line to PQ is y = (-5/6)x + 4.
Learn more about equation of line here: brainly.com/question/2564656
#SPJ1
what is the mode of the data represented in this line plot?
Answer:6
Step-by-step explanation:
What is the area of a right triangle with a height of 6-yards and a base of 22 yards?
O 34 yds²
O 68³
yds²
O 132 yds²
O
137/ yds²
Answer:
68 3/4 yds
Step-by-step explanation:
trust me :)
Answer:
see below
Step-by-step explanation:
area of triangle formula = 1/2 base * height
so 1/2*6*22 =66
not sure why there's no choice of 66
it is known that roughly 2/3 of all human beings have a dominant right foot or eye. is there also right-sided dominance in kissing behavior? an article reported that in a random sample of 127 kissing couples, both people in 79 of the couples tended to lean more to the right than to the left.
It is possible that there is right-sided dominance in kissing behavior, based on the reported study. The fact that in a random sample of 127 kissing couples, both people in 79 of the couples tended to lean more to the right than to the left suggests a pattern of right-sided dominance.
However, it is important to note that this study alone is not conclusive evidence of right-sided dominance in kissing behavior.
Further research would be needed to confirm whether there is a consistent pattern of right-sided dominance in kissing behavior across different populations and cultures. It is also possible that other factors, such as social or psychological factors, could influence the direction in which people lean during a kiss. Therefore, it is important to approach this topic with caution and not draw any firm conclusions based on a single study.
Learn more about right-sided dominance
https://brainly.com/question/10709533
#SPJ4
Kevin has a remote control car. Every 3/40 of a second, the remote control car travels 3/ 8 of a foot. How many feet per second does the remote control car travel?
The number of feet per second that the remote control car travels is: 5 ft/s
How to divide fractions?The formula to find the speed from distance and time is:
Speed = Distance/time
Now, we are given:
Time: t = 3/40 seconds
Distance = 3/8 ft
Thus:
Speed = (3/8)/(3/40)
Speed = (3/8) * (40/3)
Speed = 5 ft/s
Thus, that is the speed that the remote control car travels
Read more about fraction division at: https://brainly.com/question/1622425
#SPJ4
the manager of a sawmill wants to find out what percentage of the boards that the mill produced are defective.which sampling methods are likely to be biased?select each correct answer.responseson 1 day, an hour after the sawmill begins production, 30 boards in a row are selected and examined.on 1 day, an hour after the sawmill begins production, 30 boards in a row are selected and examined.the manager sends an email to 20 customers who buy lumber from the mill, asking each how many of the boards they bought the past week were defective. results from the first 5 customers to respond are tallied.the manager sends an email to 20 customers who buy lumber from the mill, asking each how many of the boards they bought the past week were defective. results from the first 5 customers to respond are tallied.the manager selects 20 boards at random each day for 5 days and examines them.the manager selects 20 boards at random each day for 5 days and examines them.every 40th board produced over the course of 1 week is selected and examined.
Sampling methods that may be biased for finding the percentage of defective boards in a sawmill production are: selecting 30 consecutive boards, emailing customers and relying on their responses, and selecting every 40th board produced. So, the correct answer is A, B and D.
The biased sampling methods are Examining 30 consecutive boards one hour after production begins may be biased because it only captures a snapshot of the production at that specific time, and the boards selected may not be representative of the entire batch produced during the day.
Emailing customers to ask about defective boards may be biased because the response rate may vary among customers, and customers who experienced a higher or lower number of defective boards may be more likely to respond.
Selecting 20 boards at random each day for 5 days and examining them is less likely to be biased, as long as the selection process is truly random and representative of the entire production.
Selecting every 40th board produced over the course of one week is also less likely to be biased if the production process is consistent and there are no patterns or variations in the production that would affect the quality of every 40th board. So, the correct answer for biased is A, B and D.
To know more about biased sampling methods:
https://brainly.com/question/18900165
#SPJ4
Write linear equation in slope intercept form:1/4x+y=-2/7
The given linear equation in slope intercept form is y = -1/4(x) - 2/7.
What is the slope-intercept form?In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical equation;
y = mx + c
Where:
m represents the slope or rate of change.x and y are the points.c represents the y-intercept or initial value.By making "y" the subject of formula, we have the following:
1/4x + y = -2/7
y = -1/4(x) - 2/7
By comparison, we have the following:
Slope, m = -1/4.
y-intercept, c = -2/7.
Read more on slope-intercept here: brainly.com/question/7889446
#SPJ1
Which inequality represents the values of that ensure triangle ABC exists?
A
2x + 4
B
18
6x
O A. < x < 1/1
OB. -< < 1/1
O C.
1 < x < 5
OD. 2 < x < 6
C
The Inequality which ensure triangle exists is 22 > 4x > 7.
What is inequality ?Inequality is defined as the relation between two quantities with the sign of inequality that is >, <, ≤ , ≥ ."
Theorem used In ΔABC,
AB + BC >AC
AC+ BC >AB
AC + AB > BC
According to the question,
In triangle ABC.
AC = 18units
BC = 6x units,
AB = 2x + 4 units
.
Substitute the value in the inequality to ensure triangle exists we get 4x > 7 and 22 > 4x.
From (1) and (2) inequality of triangle we get 22 > 4x > 7.
Hence, Inequality which ensure triangle exists is 22 > 4x > 7.
Learn more about Inequalities on
https://brainly.com/question/11317965
#SPJ1
Which inequality represents the values of that ensure triangle exists? a triangle with these side lengths: AC = 18 units, BC = 6x units, and AB = 2x + 4 units
HELPPPPPPPPPPPP PLSSSSSSS
A manufacturer of hard safety hats for construction workers is concerned about the mean and the variation of the forces helmets transmit to wearers when subjected to a standard external force. The manufacturer desires the mean force transmitted by helmets to be 800 pounds (or less), well under the 1000-pound legal limit, and the standard deviation to be less than 40. A random sample of 31 helmets was tested and the sample mean and variance were found to be 825 pounds and 2350 pounds2, respectively. The manufacturer wants to know if the data provides sufficient evidence to indicate that the standard deviation is significantly less than 40.
Step 1 of 5: Calculate the test statistic for this problem. Round your answer to two decimal places.
Step 2 of 5: Determine the p-value for a lower one-sided alternative hypothesis (left-tail test). The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 3 of 5: What is the rejection region at the 10% level of significance for the test on the variance for a left-tailed alternative hypothesis? The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 4 of 5: State your conclusion using a significance level of 0.05. The alternative hypothesis for this problem is H1: Ï2 < 1600 lbs2.
Step 5 of 5: Calculate a 90% confidence interval for the variance of force on the helmets. Round your answers to four decimal places.
Step 1: The test statistic is 56.56.
Step 2: Using a chi-square distribution table with 30 degrees of freedom (n - 1), we find that the p-value is less than 0.0001.
Step 3: The rejection region for a left-tailed test with 30 degrees of freedom at the 10% level of significance is any test statistic less than 18.307.
Step 4: The test statistic of 56.56 is greater than the critical value of 18.307.
Step 5: The 90% confidence interval for the variance of force on the helmets is [1615.46, 4123.82]
What is Variance?In statistics, variance is a measure of the spread or dispersion of a set of data points. It is calculated as the average of the squared differences from the mean.
Step 1: To test whether the standard deviation is significantly less than 40, we can use a chi-square test with the null hypothesis H0: [tex]σ^{2}[/tex] ≥ 1600 lbs² and the alternative hypothesis H1: σ² < 1600 lb[tex]s^{2}[/tex]. The test statistic is:
chi-square = (n - 1) *[tex]s^{2}[/tex] / [tex]σ^{2}[/tex]
where n is the sample size, [tex]s^{2}[/tex] is the sample variance, and [tex]σ^{2}[/tex] is the population variance under the null hypothesis.
Substituting the given values, we have:
chi-square = (31 - 1) * 2350 / 1600 = 56.56
Rounding to two decimal places, the test statistic is 56.56.
Step 2: To determine the p-value for a left-tailed test, we need to find the area under the chi-square distribution to the left of the test statistic. Using a chi-square distribution table with 30 degrees of freedom (n - 1), we find that the p-value is less than 0.0001.
Step 3: The rejection region for a left-tailed test with 30 degrees of freedom at the 10% level of significance is any test statistic less than 18.307.
Step 4: Since the test statistic of 56.56 is greater than the critical value of 18.307, we reject the null hypothesis and conclude that there is sufficient evidence to indicate that the standard deviation is significantly less than 40 at the 5% level of significance.
Step 5: To calculate a 90% confidence interval for the variance of force on the helmets, we can use the formula:
[(n - 1) * [tex]s^{2}[/tex]/ chi-square upper, (n - 1) * [tex]s^{2}[/tex] / chi-square lower]
where chi-square upper and chi-square lower are the upper and lower critical values, respectively, from the chi-square distribution table for 30 degrees of freedom at the 5% level of significance. Substituting the given values, we have:
chi-square upper = 45.722
chi-square lower = 18.307
[(31 - 1) * 2350 / 45.722, (31 - 1) * 2350 / 18.307] = [1615.46, 4123.82]
To learn more about Variance visit the link:
https://brainly.com/question/9304306
#SPJ4
A teacher surveyed her class after they had taken a vocabulary test. Eighteen of the students claimed they had studied
at least one hour for the test. The remaining twelve students admitted that they had not studied for the test at all. The
test results (expressed as a percent) for the two groups are shown below.
Studied: 88, 100, 94, 79, 92, 100, 95, 83, 89, 99, 100, 91, 89, 95, 100, 93, 96, 84
Did Not Study: 82, 72, 45, 91, 58, 83, 65, 87, 90, 77, 73, 89
1. Calculate the range and Interquartile range for each set of data.
2. Using complete sentences, compare the data sets based on your results in part A.
NEED THIS ASAP PLEASE
A rectangular prism has a length of 10 inches, a width of 4 inches, and a height of 3.7 inches. What is the volume of this rectangular prism?
Answer:
I believe it's 148.
Step-by-step explanation:
You must do L x W x H to find the volume of a rectangular prism or cube.
Mr. Johnson took the price of a watch that was listed at $60 and marked it up by 30%. After the mark up, What is the selling price of the watch?
Answer:
$78
Step-by-step explanation:
60+30% = 78
...................
Which is the only congruence theorem that cannot be use to prove these triangles to be congruent?
A
SAS
B
AAS
C
SSS
D
ASA
The only congruence theorem that cannot be used to prove these triangles to be congruent is option B, AAS (Angle-Angle-Side).
The SAS (Side-Angle-Side), SSS (Side-Side-Side), and ASA (Angle-Side-Angle) congruence theorems all involve matching corresponding sides and angles of two triangles. However, AAS only matches two angles and a non-included side, which is not enough to guarantee congruence in all cases.
In fact, the AAS congruence theorem only works if the given non-included side is between the two given angles, forming a "triangle sandwich" with the two given angles as the bread and the non-included side as the filling.
If the non-included side is not between the two given angles, then it is possible to have two non-congruent triangles with the same angle measures, but different side lengths.
Therefore, the AAS congruence theorem cannot be used to prove all cases of triangle congruence, making it the only option that cannot be used to prove these triangles to be congruent
Learn more about AAS congruence theorem here:
https://brainly.com/question/30094772
#SPJ1
All relationships have equal weight; none is stronger than any other. true or false?
False. While all relationships should be valued and respected, it's unrealistic to say that they all have equal weight. Some relationships may be closer and more intimate than others, or may require more time and energy to maintain.
Additionally, some relationships may have greater consequences or impact on our lives than others. It's important to prioritize and nurture our relationships based on their individual significance and value to us.
In the context of relationships, the term "weight" refers to the importance or influence of a particular relationship. Not all relationships have equal weight because the significance of each relationship varies based on factors such as trust, communication, shared experiences, and emotional connections.
Some relationships are naturally stronger and more influential than others due to these factors, making them more valuable and impactful in a person's life. In contrast, weaker relationships may not have the same level of trust, connection, or influence, making them less important overall. It is essential to recognize and nurture the stronger relationships in one's life to maintain a healthy support system and overall well-being.
To learn more about Weight - brainly.com/question/10069252
#SPJ11
How many times can 3.6 go into 80
Answer:
22.2
Step-by-step explanation:
Answer:
3.6 can go into 80 22 times.
Step-by-step explanation:
What happens when the function f(x) = 2 sin(2) is transformed by the rule g (w) = - f(x)?
• f(x) is stretched away from the x-axis by a factor of 2 and is reflected over the x-axis.
O f(x) is reflected over the y-axis.
O f(x) is reflected over the x-axis.
• f(x) is compressed toward the y-axis by a factor of 1/2 and is reflected over the y-axis
Answer:
• f(x) is stretched away from the x-axis by a factor of 2 and is reflected over the x-axis.
Step-by-step explanation:
The function f(x) = 2sin(2x) has an amplitude of 2 and a period of π/2. When we apply the rule g(w) = - f(x), we are reflecting the graph of f(x) over the x-axis and then taking its opposite. This means that the amplitude of g(w) will still be 2, but the graph will be reflected and stretched away from the x-axis by a factor of 2.
I hope it helps you
What is the value of x in the equation 2x + 3 = 11?
Answer: x=4
Step-by-step explanation:
Isolate x using opposite operations.
2x + 3 = 11
2x = 8
x = 4
Answer:
4
Step-by-step explanation:
subract 3 from 11
2x=8
divide by 2
x=4
A piece of machinery is designed in a shape of a triangular prism. It must be coated in Teflon before it is placed in the machine. How many square inches of Teflon will be needed to completely to cover the machinery
We would need 168 square inches of Teflon to completely cover the triangular prism machinery.
To calculate the surface area of a triangular prism, we need to find the area of each face and then add them up. Let's assume that the triangular bases of the prism have base b and height h, and that the length of the prism is l.
The surface area of the triangular bases is (1/2)bh for each base, so the total area is (1/2)bh + (1/2)bh = bh.
The lateral surface area of the prism is the area of the three rectangular faces. Each rectangular face has length l and height h, so the total lateral surface area is 3lh.
Therefore, the total surface area of the triangular prism is
bh + 3lh
To determine how much Teflon is needed to cover the machinery, we need to know the dimensions of the triangular prism. Once we have those dimensions, we can calculate the surface area using the formula above and then use that value to determine the amount of Teflon required.
Let's say the base of the triangular prism is 4 inches and the height is 6 inches, and the length of the prism is 8 inches. Then the surface area of the triangular prism is
bh + 3lh
= (4 in. x 6 in.) + 3(8 in. x 6 in.)
= 24 in² + 144 in²
= 168 in²
To know more about triangular prism here
https://brainly.com/question/17286531
#SPJ4
The set of values for x that satisfies a quadratic inequality is x < -0.5 or x > 1.5
Write down a possible quadratic inequality. Can u show me working it how to do this please. Thanks
Answer:
To write a possible quadratic inequality, we first need to determine which quadratic function has roots at x = -0.5 and x = 1.5.
We know that the solution to the quadratic inequality is x < -0.5 or x > 1.5, which means that the parabola associated with our quadratic function should not intersect the x-axis between x = -0.5 and x = 1.5.
One quadratic function with roots at x = -0.5 and x = 1.5 is:
(x + 0.5)(x - 1.5) ≤ 0
To see why this is the case, we can use a graphing calculator to graph the quadratic function y = (x + 0.5)(x - 1.5) and observe that the function is negative (i.e., has a y-value less than zero) when x is less than -0.5 or greater than 1.5.
Alternatively, we can use the fact that the product of two factors is less than or equal to zero if and only if one factor is positive and the other is negative.
Since (x + 0.5) is positive for x > -0.5 and negative for x < -0.5, and (x - 1.5) is positive for x > 1.5 and negative for x < 1.5, the inequality (x + 0.5)(x - 1.5) ≤ 0 is true for x < -0.5 or x > 1.5, but false for -0.5 < x < 1.5.
Therefore, a possible quadratic inequality that satisfies the given set of values for x is:
(x + 0.5)(x - 1.5) ≤ 0
A triangle has two sides measuring 4 cm and 8 cm. Which lengths cannot be the length of the third side
The length of the third side of a triangle cannot be 15 cm
The correct answer is an option (b)
We know that the triangle inequality theorem states that the sum of any two sides of a triangle is greater than or equal to the third side.
For example if a, b, c represents the side of a triangle then by above theorem a + b ≥ c
Here, the two sides of a triangle measure 4 cm and 8 cm.
Let a = 4 cm and b = 8 cm and c represents the third side of a triangle.
Using triangle inequality theorem,
a + b ≥ c
4 + 8 ≥ c
12 ≥ c
This means that the third side of the triangle must be less than or equal to 12 cm.
Thus, the correct answer is an option (b)
Learn more about the triangle here:
https://brainly.com/question/30298845
#SPJ4
The complete question is:
A triangle has two sides measuring 4 cm and 8 cm. Which lengths cannot be the length of the third side
a) 7 cm
b) 15 cm
c) 10 cm
d) 5 cm
A rectangle and a triangle below have the same height and base measurements. Find the area of the rectangle and the right triangle, and then compare the areas
The area of rectangle is ____ square inches. The area of the triangle is __ square inches . The area of the triangle is ___ the area of the rectangle
The area of the rectangle is 48 in².
The area of the triangle is 24 in².
The area of the triangle is half the area of the rectangle.
How to calculate the area of a rectangle and a triangle?To calculate the area of a rectangle, we multiply the length of the rectangle by its width. And to calculate the area of a triangle we multiply the base of the triangle to the height of the triangle and divide by 2.
To calculate the area of the rectangle, we use the formula below
Formula:
A = LW....................... Equation 1Where:
A = Area of the rectangleL = Length of the rectangleW = Width of the rectangleFrom the question,
Given:
L = 6 inW = 8 inSubstitute into equation 1
A = 6×8A = 48 in²Also, the area of the triangle is given by the formula below
A' = bh/2.................. Equation 2Where:
A' = Area of the triangleb = Base of the triangle = 6 inh = Height of the triangle = 8 inSubstitute into equation 2
A' = (6×8)/2A' = 24 in²Hence, the area of the triangle is half the area of the rectangle.
Learn more about area here: https://brainly.com/question/28470545
#SPJ1
PLEASE HELP AND SHOW WORK! EXPLAIN HOW YOU GOT THE ANSWER I WILL MARK YOU BRAINLIEST!!!
The height of the cylinder, given the volume and the diameter of the base, would be 2, 592.46 feet
How to find the height of the cylinder ?The given diameter of the base is 10 inches, so we need to find the radius first. The radius is half the diameter:
Radius (r) = Diameter / 2 = 10 inches / 2 = 5 inches
We also need to convert the radius from inches to feet since the volume is given in cubic feet:
5 inches = 5/12 feet = 0.4167 feet
Volume of a cylinder:
Volume (V) = πr²h
450π = π x (0.4167)^2 x h
450 = (0.4167)^2 x h
h = 450 / (0.4167)^2 = 2, 592.46 feet
Find out more on height at https://brainly.com/question/28247116
#SPJ1
PLEASE is due very soon please explain 50pts
Answer:
3
Step-by-step explanation:
Because same numbers = same y intercept but I'm not sure
Answer:
1) The image has the same slope, different y-intercept
Step-by-step explanation:
You want the relationship between the line 3x -5y = 4 and its image dilated by a factor of 5/3 centered at the origin.
DilationDilation about the origin multiplies every coordinate by the dilation factor. Dilation does not change slopes or angles, but it changes lengths by the dilation factor.
Dilation of a lineWhen the equation of a line is written in standard form, the dilation of it effectively multiplies the constant by the dilation factor.
The given line has intercepts ...
ax +by = c
x-intercept = c/a = 4/3
y-intercept = c/b = -4/5
If these values are multiplied by the dilation factor 5/3, they become ...
x-intercept' = (5/3)(4/3) = 20/9 = 2 2/9
y-intercept' = (5/3)(-4/5) = -4/3 . . . . . note the y-intercept has changed
SlopeThe slope of the given line can be determined from its intercepts:
m = (-y intercept)/(x intercept) = -(-4/5)/(4/3) = 3/5
Since both of these intercepts are multiplied by the same dilation factor, their ratio remains unchanged. The slope of the dilated line is the same.
EquationEffectively, the dilated line's equation is ...
3x -5y = 4(5/3)
3x -5y = 20/3
__
Additional comment
The original (dashed) line and its dilated image are shown in the attachment.
Adding and subtracting decimals
1) 34.12 - 41.23 + 14.01
2) -34.12 + 41.23 - 14.01
Combine all positive numbers:
Combine all negative numbers:
Rewrite:
(look at the picture)
Answer:
1Step-by-step explanation:
Question 4 of 10
Does this table represent a function? Why or why not?
X
2
3
4
5
5
y
1
4
4
2
5
OA. Yes, because there is the same number of x-values as y-values.
OB. Yes, because every x-value corresponds to exactly one y-value.
C. No, because one x-value corresponds to two different y-values.
OD. No, because two of the y-values are the same.
Does this table represent a function: C. No, because one x-value corresponds to two different y-values.
What is a function?In Mathematics and Geometry, a function can be defined as a mathematical equation which is typically used for defining and representing the relationship that exists between two or more variables such as an ordered pair.
This ultimately implies that, all functions are used in mathematics to uniquely map an input variable (domain or independent values) to an output variable (range or dependent values).
Based on the table shown above, we can reasonably infer and logically deduce that it does not represent a function because the input values (domain or independent values) are not uniquely mapped to the output values (range or dependent values);
3 → 4
4 → 4
Read more on function here: https://brainly.com/question/27862183
#SPJ1