PLEASE HELP

the graph shows a plot of an objects velocity versus time for 15 seconds. is the acceleration of the object constant or changing? how do you know? what does this tell you about the net force on the object?

Answer:

the average induced emf in the coil is 0.016 V.

Explanation:

Given;

diameter of the wire, d = 14.1 cm = 0.141 m

change in magnetic filed strength, dB = 0.52 T - 0.23 T = 0.29 T

change in time, dt = 0.28 s

The area of the wire is calculated as follows;

[tex]A = \frac{\pi d^2}{4} \\\\A = \frac{\pi \times (0.141)^2}{4} \\\\A = 0.0156 \ m ^2[/tex]

The induced emf is calculated as follows;

[tex]emf = \frac{dBA}{dt} \\\\emf = \frac{0.29 \times 0.0156}{0.28} \\\\emf = 0.016 \ V[/tex]

Therefore, the average induced emf in the coil is 0.016 V.

Answer:

254.982J

Explanation:

mass = 130kg

gravity = 9.807m/s^2

height = 0.200m

Answer:

Explanation:

mass (m) = 130 kg

height (h) = 0.200 m

(g) = 9.8

potential energy = m×g×h

= 130×0.200×9.8

= 254.8 joule

Each minute, the disk completes 100 revolutions, so a point on the rim traverses a distance of 100 times the circumference of the disk and would have a linear speed of

100 rev/min

= (100 rev/min) × (2π × 50 cm/rev) × (1/100 m/cm) × (1/60 min/s)

= 5π/3 m/s ≈ 5.236 m/s

Then after 30 s of rotation, the point would have traveled a distance of

(5π/3 m/s) × (30 s) = 50π m ≈ 157.08 m

Answer:

I know you said not to do this but I am doing a challenge and You asked this an hour ago. PLS DON'T REPORT ME.

Explanation: Sorry

Answer:

hey but the person at the top is right

Answer:

0.185

Explanation:

Volume of water displaced = 0.000250 ( volume of cup )

Mass of water displaced by cup = density of water X volume of water displaced

= 1000 X 0.000250 = 0.250 kg

Mass of water displaced = mass of cup + mass of pennies ( law of flotation)

0.25 = 0.0650 + mass of pennies

Mass of pennies = 0.2500 - 0.0650

= 0.185 kg

Don’t hesitate to like and rate this answer. It would mean a lot for me.

Answer:

Blank 1: Gasses

Blank 2: More

Blank 3: Solids

Blank 4: Fluids

Blank 5: Liquid

Blank 6: Gas

Blank 7: Higher

Blank 8: Lower

Blank 9: Sun

Blank 10: Radiation

Blank 11: Conductors

P.S. order of answers does not matter between Blank 5 and 6.

Answer:

Role of government in regulating production

Explanation:

The role of government in regulating show , provides the legal and social framework, uphold competition, provides public goods and services.

The community's role in conserving and enhancing common-property resources is well known.

In extra, its role in helping market growth by its power to execute trade agreements among transacting parties belonging to the community network is stressed.

Thus, it provides the legal and social framework, maintains competition, and provides public goods and services.

To learn more about  economics in community click here:

https://brainly.com/question/1344575

Answer:

False

Explanation:

The Sun rotates in this same, right-hand-rule direction. All planetary orbits lie in nearly the same plane. All planetary orbits are nearly circular (eccentricity near zero).

Rate as Brainliest please

Answer:

Your answer is B

because it's on sneel's law.

that is sin of incident ray / sin of refracted ray is refractive index

Answer:

I dont know sorry

Explanation:

hehe

Answer:

the answer is false

Explanation:

plastic doesnt conduct anything

Choice-A is the main reason that people use the thing in the picture.

Answer:

a) The back spoon gives a right image (upright)

b) the front gives an inverted image

Explanation:

The spoon is a curved metallic object, when we see ourselves from the back we have a convex mirror, in this type of mirror when the law of reflection is applied the rays diverge therefore the eye-brain system forms the image with the prolongation of the rays, therefore the image is straight and smaller than the object.

When we look through the deep side of the spoon, we have a concave mirror and as the object (we) is further away than the distance, the rays converge to a point, so the image is real, inverted smaller than the object.

In summary.

a) The back spoon gives a right image (upright)

b) the front gives an inverted image

Answer: This is not easy lol

Explanation:

Find how much work ∆W is done by the motor in lifting the elevator:

P = ∆W / ∆t

where

• P = 45.0 kW = power provided by the motor

• ∆W = work done

• ∆t = 20.0 s = duration of time

Solve for ∆W :

∆W = P ∆t = (45.0 kW) (20.0 s) = 900 kJ

In other words, it requires 900 kJ of energy to lift the elevator and its passengers. The combined mass of the system is M = (m + 490.0) kg, where m is the mass of the elevator alone. Then

∆W = M g h

where

• g = 9.80 m/s² = acceleration due to gravity

• h = 35.0 m = distance covered by the elevator

Solve for M, then for m :

M = ∆W / (g h) = (900 kJ) / ((9.80 m/s²) (35.0 m)) ≈ 2623.91 kg

m = M - 490.0 kg ≈ 2133.91 kg ≈ 2130 kg

Answer:

it is safe to stand at the end of the table

Explanation:

For this exercise we use the rotational equilibrium condition

         Στ = 0

         W x₁ - w x₂ - w_table x₃ = 0

         M x₁ - m x₂ - m_table x₃ = 0

where the mass of the large rock is M = 380 kg and its distance to the pivot point x₁ = 850 cm = 0.85m

the mass of the man is 62 kg and the distance

            x₂ = 4.5 - 0.85

            x₂ = 3.65 m

the mass of the table (m_table = 22 kg) is at its geometric center

            x_{cm} = L/2 = 2.25 m

            x₃ = 2.25 -0.85

            x₃ = 1.4 m

let's look for the maximum mass of man

            m_{maximum} = [tex]\frac{ M x_1 -m_{table} x_3}{ x_2}[/tex]

let's calculate

             m_{maximum} = [tex]\frac{ 380 \ 0.85 - 22 \ 1.4}{3.65}[/tex](380 0.85 - 22 1.4) / 3.65

             m_{maximum} = 80 kg

we can see that the maximum mass that the board supports without turning is greater than the mass of man

             m_{maximum}> m

consequently it is safe to stand at the end of the table

Answer:

[tex]\lambda_s =6.43*10^-4m[/tex]

Explanation:

From the question we are told that:

Diffraction grating [tex]N=1250slits/cm[/tex]

Distance b/w Screen and grating length [tex]d_{sg}=17.5 cm[/tex]

Distance b/w neighboring maxima and Screen [tex]d_{ms}=8.44[/tex]

Generally the equation for grating space is mathematically given by

[tex]d(g)=\frac{1}{N}[/tex]

[tex]d(g)=\frac{100}{1250}[/tex]

[tex]d(g)=0.08[/tex]

Generally the equation for small angle approximation is mathematically given by

[tex]\triangle y=\frac{\lambda d}{L}[/tex]

Therefore for longest wavelength

[tex]\lambda _l=\frac{8.44*10^{-3}*(0.08)}{0.175m}[/tex]

[tex]\lambda _l=3.858*10^{-3}[/tex]

Therefore the third order maximum equation for the shorter wavelength as

[tex]\lambda_s =\frac{1}{6} \lambda_l[/tex]

[tex]\lambda_s =\frac{1}{6} (3.858*10^-^3)[/tex]

[tex]\lambda_s =6.43*10^-4m[/tex]

The wavelengths in the light is given as

[tex]\lambda_s =6.43*10^-4m[/tex]

Answer:

a - 3, 5

b - 1

c - 2, 4

Explanation:

a). The distance between fringes on the screen

        [tex]$y = \frac{m \lambda L}{d}$[/tex]

where, λ is wavelength, m is order of pattern, L is distance between slit and screen, d is separation between slits.

Now we analyze that spacing between bright spots increases as increasing distance L from slits to wall and increasing the wavelength of the laser light, λ.

b). The spacing between the bright spots decreases as the distance between the two slits increases.

c). Has no effect on the spacing between the bright spots on the wall by increasing the distance from the laser to the slits as well as increasing the brightness of the laser.

Answer:

C because that requires lots of energy

Answer: E= 20 N/C

Explanation: Charge q = 2.5 C , force F = 50 N. F = qE and

E= F/q= 50N / 2.5 C = 20 N/C

Answer:

[tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex]

Explanation:

r = Radius = [tex]\dfrac{2}{2}=1\ \text{mm}[/tex]

B = Magnetic field = 3 mT

1 mm = Distance from the surface of the wire

V = Voltage

x = Distance from the probe = [tex]r+1=1+1=2\ \text{mm}[/tex]

R = Resistance

L = Length of wire = 4.5 m

Magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2\pi x}\\\Rightarrow I=\dfrac{B2\pi x}{\mu_0}\\\Rightarrow I=\dfrac{3\times 10^{-3}\times 2\times \pi 2\times 10^{-3}}{4\pi 10^{-7}}\\\Rightarrow I=30\ \text{A}[/tex]

Voltage is given by

[tex]V=IR\\\Rightarrow R=\dfrac{V}{I}\\\Rightarrow R=\dfrac{1.5}{30}\\\Rightarrow R=0.05\ \Omega[/tex]

Resistivity is given by

[tex]\rho=\dfrac{RA}{L}\\\Rightarrow \rho=\dfrac{0.05\times \pi (1\times 10^{-3})^2}{4.5}\\\Rightarrow \rho=3.49\times 10^{-8}\ \Omega\text{m}[/tex]

The resistivity of the material is [tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex].

Answer:

475.7 m/s

Explanation:

Given,

Frequency ( f ) = 67 Hz

Wavelength ( λ ) = 7.1 m

To find : Speed ( v ) = ?

Formula : -

v = f λ

v

= 67 x 7.1

= 475.7 m/s

Therefore,

the speed of the wave is 475.7 m/s.

Answer:

The team must have a vast knowledge of thermodynamics

Explanation:

Just took the test!!!

Answer:

C. Thermodynamics

Explanation:

Answer:

It is imperative that the collision takes place in a plane parallel to the plane containing the camera lens so that parallax does not affects the recording of camera.

Explanation:

It is imperative that the collision takes place in a plane parallel to the plane containing the camera lens so that parallax does not affect the recording of the camera. There may occur an error in video analysis if the camera is tilted at an angle in relation to the collision plane.

(The role of the lens is to take light to a fixed focal point.)