Please help! What kind of energy is produce when solar panel to lightbulb filament?

Answer:

Wave B has the longest wavelength

Explanation:

The wavelength of a wave is the distance between two consecutive points that are in phase.

The wavelength of a wave is also defined as the distance between successive crests or troughs along the z-axis.

A crest is the point of maximum upward displacement whereas a trough is a point of maximum downward displacement.

Comparing the three waves A, B and C over a unit distance.

Wave A:

Wave A has three crests and two troughs. The wave begins and ends at the rest position. There are 2½ successive points in phase in wave A

Therefore, the wavelength = 1/2.5 = 0.4

Wave B:

Over a unit distance, wave B has two crests and one trough. The wave begins at the rest position and ends at the top of a crest. There are 1¼ successive points in phase in wave B

Therefore, the wavelength = 1/1¼ = 0.8

Wave C:

Over a unit distance, wave C has four crests and four troughs. The wave begins and ends at the rest position.

There are 4 successive points in phase in wave B

Therefore, the wavelength = 1/4 = 0.25

Therefore, wave B has longest wavelength

Answer:

When an object moves with a constant speed in a circular path, then its motion is called as Circular motion.

Examples of Uniform Circular Motion :--

The moon moves in uniform circular motion around the earth.

A stoned tied to a thread and rotated in circular motion.

An athlete running on a circular track.

A satellite revolving around Earth.

Answer:

Pressure = Force/Area

347 = 1300/Area

Area = 1300/347

area= 3.47m2

Answer:

I hope the above pic will help you

I will always help you understanding your assingments have a great day

#Captainpower

Answer:

the amplitude of the sequence oscillation=

ASO = length × velocity

= 9.8 × 0.2 = 19.6

ASO = 19.6

Answer:

yes I think

Explanation:

Solar energy systems refer to any technology that converts the sun's energy into another form of energy, such as heat or electricity. ... Solar power is a a subset of solar energy, a more narrow term that typically refers to the conversion of the sun's rays to electricity.

Answer:

1.2 mi/hr/sec

Explanation:

a = Vf - Vi / t (formula)

-----------------------------------

     6mi/hr - 0 mi/hr        6 mi/hr

a = ____________ =    _______ = 1.2 mi/hr/sec

              5 sec                 5 sec

Answer:

c. because A will land first becuase its heavier :)

Explanation:

Answer:

v = 0.33 [m/s]

Explanation:

We must remember that speed is defined as the relationship between the displacement in a given time. In this way, we can propose the following equation.

[tex]v=d/t[/tex]

where:

v = velocity [m/s]

d = displacement = 40 [m]

t = 2 [min] = 120 [s]

Now replacing we have:

[tex]v=40/120\\v=0.33[m/s][/tex]

Explanation:

To derive an equation you must indicate the variable you want to solve for.

Here we have tension of an object A and Tension 1.

Two variables or unknown are given hence we cannot derive any other equations.

Answer:

Explanation:

Loss of potential energy but a gain in kinetic (becasue its falling)

Answer:

There is a loss of potential energy and a gain of kinectic

Explanation:

Answer:

Explanation: The chemical action that occurs in the cell while the current is flowing causes hydrogen bubbles to form on the surface of the anode. This action is called POLARIZATION. Some hydrogen bubbles rise to the surface of the electrolyte and escape into the air, some remain on the surface of the anode. If enough bubbles remain around the anode, the bubbles form a barrier that increases internal resistance. When the internal resistance of the cell increases, the output current is decreased and the voltage of the cell also decreases.

   A cell that is heavily polarized has no useful output. There are several methods to prevent polarization or to depolarize the cell.

   One method uses a vent on the cell to permit the hydrogen to escape into the air. A disadvantage of this method is that hydrogen is not available to reform into the electrolyte during recharging. This problem is solved by adding water to the electrolyte, such as in an automobile battery. A second method is to use material that is rich in oxygen, such as manganese dioxide, which supplies free oxygen to combine with the hydrogen and form water.

   A third method is to use a material that will absorb the hydrogen, such as calcium. The calcium releases hydrogen during the charging process. All three methods remove enough hydrogen so that the cell is practically free from polarization.

LOCAL ACTION

   When the external circuit is removed, the current ceases to flow, and, theoretically, all chemical action within the cell stops. However, commercial zinc contains many impurities, such as iron, carbon, lead, and arsenic. These impurities form many small electrical cells within the zinc electrode in which current flows between the zinc and its impurities. Thus, the chemical action continues even though the cell itself is not connected to a load.

   Local action may be prevented by using pure zinc (which is not practical), by coating the zinc with mercury, or by adding a small percentage of mercury to the zinc during the manufacturing process. The treatment of the zinc with mercury is called amalgamating (mixing) the zinc. Since mercury is many times heavier than an equal volume of water, small particles of impurities weighing less than mercury will float to the surface of the mercury. The removal of these impurities from the zinc prevents local action. The mercury is not readily acted upon by the acid. When the cell is delivering current to a load, the mercury continues to act on the impurities in the zinc. This causes the impurities to leave the surface of the zinc electrode and float to the surface of the mercury. This process greatly increases the storage life of the cell.

Answer:

It is one of the strongest materials in the world and can hold anything

First we calculate the acceleration of the cart:

a = (v₂ - v₁) / (t)

a = (7 m/s - 3 m/s) / (8 s)

a = 4 m/s / 8 s

a = 0.5 m/s²

Using the Newtons Second Law:

F = m×a

F = (10 kg)(0.5 m/s²)

F = 5 N

Answer:

The energy used by the iron is 0.2083 KWH.

Explanation:

Electric Energy

The energy consumed by an electrical appliance is given by:

E = P.t

Where:

P = Power consumed

t = Time the appliance is connected to the power supply

The power can be calculated as a function of the voltage V and the current I:

P = V.I

Therefore, the energy is:

E = V.I.t

The electric iron draws a current of I=5 A when connected to a V=250 V supply for t=10 minutes. The time must be expressed in hours, thus t=10/60=0.167 hours.

Thus, the energy is:

E = 250 V * 5 A * 0.167 H

E = 208.33 WH

Converting to KWH:

E = 208.33/1000 = 0.2083 KWH

The energy used by the iron is 0.2083 KWH

Answer:

The following factors could be responsible for size of an Impact Crater:

Hope it helps!<3

Answer:

[tex]\lambda =533.6 nm [/tex]

Explanation:

the slits spacing, d = 0.21 mm

distance of screen, D = 61 cm

The condition for minima is given as

[tex]dsin(\theta) = \left ( n+\frac{1}{2} \right )\lambda[/tex]

So, first minima, n = 0

[tex]dsin(\theta_1) = \frac{1}{2}\lambda[/tex]

fifth minima, n = 4

[tex]dsin(\theta_5) = \frac{9}{2}\lambda[/tex]

[tex]d(sin(\theta_5) -sin(\theta_1))= 4\lambda[/tex]

For small angle

[tex]d(tan(\theta_5) -tan(\theta_1))= 4\lambda[/tex]

From the figure:

[tex]d(\frac{y_5}{D}-\frac{y_1}{D})= 4\lambda[/tex]

[tex]\frac{d}{D} (y_5-y_1) = 4\lambda[/tex]

[tex]\lambda = \frac{d}{4D} (y_5-y_1)[/tex]

[tex]\lambda = \frac{0.021}{4(61)} (6.2 \times 10^{-3})[/tex]

[tex]\lambda =533.6 nm[/tex]

"533.5 nm" would be the wavelength of the light used in this experiment.

According to the question,

Slits spacing,

Distance of screen,

The condition for minima is given as:

→ [tex]d (sin \Theta) = (n+\frac{1}{2} ) \lambda[/tex]

So,

1st minima, n = 0

→ [tex]d sin(\Theta_1)= \frac{1}{2} \lambda[/tex]

5th minima, n = 4

→ [tex]d (sin (\Theta_5) - sin (\Theta_1) = 4 \lambda[/tex]

For small angle,

→ [tex]d (tan (\Theta_5) - tan (\Theta_1) = 4 \lambda[/tex]

From the figure, we get

→ [tex]d(\frac{y_5}{D} - \frac{y_1}{D} )= 4 \lambda[/tex]

  [tex]\frac{d}{D} (y_5 -y_1) = 4 \lambda[/tex]

                 [tex]\lambda = \frac{d}{4D}(y_5-y_1)[/tex]

                    [tex]= \frac{0.021}{4\times 61} (6.2\times 10^{-3})[/tex]

                    [tex]= 533.6 \ nm[/tex]

Thus the above answer is correct.  

Learn more:

https://brainly.com/question/14294313

Answer:

Person A

Explanation:

Person A hears the highest frequency from the horn than Person B because Person A is present in front of a Car 1 while the Person B present behind the Car 1. The car horn is present at the front so the Person A will hear the highest frequency from the horn as compared to Person B which hears lower frequency from the horn. If the horn is present at the back side so Person B will hear highest frequency from the horn.

Answer:

The minimum speed needed at the top of the circle so that the cord remains tensioned and the ball's path remains circular is approximately is 9.903 meters per second.

Explanation:

By the Principle of Energy Conservation we understand that the minimum speed needed by the ball is that speed such that maximum height reached is equal to the diameter of the vertical circle, that is:

[tex]K =U_{g}[/tex] (1)

Where:

[tex]K[/tex] - Translational kinetic energy, measured in joules.

[tex]U_{g}[/tex] - Gravitational potential energy, measured in joules.

By definitions of translational kinetic and gravitational potential energies, we expand the equation above and clear the initial speed of the ball:

[tex]\frac{1}{2}\cdot m \cdot v^{2} = m\cdot g\cdot h[/tex]

[tex]v = \sqrt{2\cdot g\cdot h}[/tex] (2)

Where:

[tex]m[/tex] - Mass, measured in kilograms.

[tex]v[/tex] - Initial speed, measured in meters per second.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]h[/tex] - Maximum height of the ball, measured in meters.

If we know that [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]h = 5\,m[/tex], then the initial speed of the ball is:

[tex]v = \sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (5\,m)}[/tex]

[tex]v\approx 9.903\,\frac{m}{s}[/tex]

The minimum speed needed at the top of the circle so that the cord remains tensioned and the ball's path remains circular is approximately is 9.903 meters per second.

A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.

Answer:

A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.

Explanation:

Using Newtons Second Law:

F = m×a

F = (0.25 kg)(-2 m/s²)

F = -0.5 N

Answer:

It will not move, so you should push with a force greater than 20 N.

Explanation:

Static friction is a force that keeps a body at rest. This means static friction will be the force that keeps the body from moving when there is no push or pull hence you should overcome it with enough opposing force for the body to move.

In this case for the body to move , you should push with a force greater than 20 N for it to move.

yes

Explanation:

because hindi ko tlaga ala

Answer:

the answer is repel

Explanation:

Answer:

Enamel is used to coat the wires, it is the thinnest possible insulator. The coils are made up of large number of turns and enamel makes it possible to cram a lot of wires (coils) in much smaller space.

Answer:

f=156.25Hz

Explanation:

v=fT

500=fx3.2

500=3.2f

divide both sides by 3.2

f=156.25Hz

Answer:

same but from what i know is the newtons thingy

Explanation:

hope that helps!

Answer:

with the increase in mass of the object , the force of gravitation increases that eventually increases the potential energy if the object is still fixed in its relative position with surrounding objects.

Explanation:

hopes this will help you

Answer:

t = 6 s

Explanation:

Given that,

A chair is thrown upward from a balcony that's 96 ft in the air, d = 96 ft

The initial velocity of chair, u = 16 ft/s

We need to find how many seconds does the chair take to reach its highest height. Let the time is t.

[tex]t=\dfrac{d}{v}\\\\t=\dfrac{96\ ft}{16\ ft/s}\\\\=6\ s[/tex]

Hence, the chair take 6 seconds to reach its maximum height.

Answer:

0.0158m/s

Explanation:

Using the law of conservation of energy which states that the sum of momentum before collision is equal to the sum after collision. It is expressed mathematically as;

m1u1 + m2u2 =  m1v1 + m2v1

m1 and m2 are the masses of the object

u1 and u2 are the initial velocities

v1 and v2 are the final velocities

Given

m1 = 300g  = 0.3kg

u1 = 1.10m/s

m2 = 4.00kg

u2 = 0m/s (at rest)

v1 = 0.890

v2 = ?

Substitute the given values into the formula;

0.3(1.10) + 0 = 0.3(0.89) + 4v2

0.33 = 0.267 + 4v2

0.33-0.267 = 4v2

0.063 = 4v2

v2 = 0.063/4

v2 = 0.0158m/s

Hence the speed of the large cart after the collision is 0.0158m/s

According to the question:

Mass,

Final velocity,

Initial velocity,

By using the law of conservation, we get

→ [tex]m_1 u_1 +m_2 u_2 =m_1 v_1 +m_2 v_1[/tex]

By substituting the values, we get

→ [tex]0.3(1.10)+0 = 0.3(0.89)+4v_2[/tex]

→              [tex]0.33=0.267+4 v_2[/tex]

   [tex]0.33-0.267 = 4 v_2[/tex]

              [tex]0.063 =4v_2[/tex]

                   [tex]v_2 = \frac{0.063}{4}[/tex]

                       [tex]= 0.0158 \ m/s[/tex]

Thus the response above is appropriate.

Learn more about speed here:

https://brainly.com/question/14478313

Answer;

2.6

Explanation;