Answers
Answer:
eV to Joules just multiply by 1.602 × 10^-19
Hence, 1.5eV = 1.5 × 1.602 × 10^-19 J
= 3.04 × 10^-19 J
Related Questions
The half-life of radium-226 is 1,600 years and the half-life of carbon-14 is 5,730 years. In 1-2 sentences, mathematically prove that the decay constant for radium-226 is larger than the decay constant for carbon-14.
Answers
The decay constant for radium-226 is larger than the decay constant for carbon-14 due to its obtained value.
What is the rate of decay?
The reduction in the number of radionuclides per unit time is the rate of decay.
The decay constant of the radium-226 is;
[tex]\lambda_1=\frac{ 16}{100}\times 266 \\\\ \lambda_1= -36.16[/tex]
The decay constant of the carbon-14 is;
[tex]\lambda_2=\frac{ -57.3}{100}\times 14 \\\\ \lambda_1= -802.2[/tex]
Hence, the decay constant for radium-226 is larger than the decay constant for carbon-14.
To learn more about the rate of decay refer to the link;
https://brainly.com/question/14486631
#SPJ1
Answer:
0.693/1600 > 0.693/5730
Explanation:
The decay constant is the reciprocal of the time it takes for the radioactivity to decline to about 36.8% of its original value. It is the value of k in the multiplier e^(-kt), which tells the fraction remaining after time t.
When compared to the half-life, h, the value of k is ...
k = 0.693/h . . . . . decay constant for half-life h
Effectively, the decay constant is proportional to the inverse of the half-life. The constant of proportionality is ln(2) ≈ 0.693.
__
decay constant for radium-226:
0.693/1600 ≈ 4.33×10^-4
decay constant for carbon-14:
0.693/5730 ≈ 1.21×10^-4
Since 4.33×10^-4 is greater than 1.21×10^-4, the decay constant of radium-226 is larger than that of carbon-14.
_____
Additional comment
Taking the reciprocal of a positive number reverses the ordering:
1600 < 5730
1/1600 > 1/5730
The half-life of radium-226 is less than that of carbon-14, so its decay constant will be larger.
What is the difference between
longitudinal waves that have
different amplitudes?
Answers
Answer:
Wave amplitude of a transverse wave is the difference of height between a crest and the resting position. Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is currently compressed by the wave.
Answer:
A wave caused by a disturbance with more energy has greater amplitude
Explanation:
A set of water waves travels at 10.0 m/s , and 5.0 waves pass you in 4.0 s. What is the wavelength of the waves?
Answers
Answer:
8 meters
Explanation:
Frequency of waves = 5 waves / 4 s = 1.25 Hz
speed = frequency * wavelength
speed/ frequency = wavelength
10 / 1.25 = 8 m
Which picture shows an example of no work being done? A man and a woman hold a child in the air by the child's hands. A man pushes a shopping cart down the aisle of a grocery store. A child holds the bar of a set of weights without moving. A woman pulls a rolling suitcase.
Answers
Answer:
A child holds the bar of a set of weights without moving I think
Which components of static electricity does a photocopier use?
ex. charging by conduction, friction, etc
Answers
Answer:
For a photocopier to work, a field of positive charges must be generated on the surface of both the drum and the copy paper. These tasks are accomplished by the corona wires. These wires are subjected to a high voltage, which they subsequently transfer to the drum and paper in the form of static electricity.
what are the characteristics of images formed by plane mirrors
Answers
Answer:
the image is erectthe image is laterally invertedimage is formed at the same distance from the mirror as the object is in front of itthe image is of same size as that of the objectthe image is virtual (cannot be obtained on a screen)
What is physics and how does it affect every day life
Answers
Explanation:
Physics, or the study of matter, energy, and the interactions between them, helps us to understand the laws and rules that govern the physical world.
What is needed for water condensation to occur
Answers
Answer:
Warm moist air, hope this helps
Answer:
A heat source high enough to boil the water and the water itself
Explanation:
Please heelllllpppppppppppopppppop
Answers
Answer:
Explanation:
I'm assuming you need this answer quickly.
Using what we know:
The energy of a single 400 nm photon is 3.1 eV.
So a photon of 412 nm wavelength would have the energy of 4.0 ev.
A bag of frozen vegetables expanding in the microwave is a good example of how volume __________.
A. increases when temperature decreases
B. decreases when temperature increases
C. decreases when temperature decreases
D. increases when temperature increases
Answers
Answer:
D
Explanation:
because when the temperature increases things tend to rise and explode instead of decreasing
After reading the passage about acupuncture, identify which scientific claim explains why some people say acupuncture does not truly relieve pain.
Answers
Answer:
The answer would be "This ancient form of pain relief and stimulation is said to benefit patients by blocking channels which practitioners claim
Explanation:
Answer:
It provides only a placebo effect.
Explanation:
Edge
Calculate the frequency of a wave which goes through 10 cycles in 5 s
Answers
2. why did adding layers of paper help prevent the egg from breaking open rather than one thick layer with the same number of sheets?
Answers
How much does a 200 kg car weight?
Answers
Answer:
22 kgs
Explanation:
440.925 pounds if thats what you mean but kgs is the weight system for everyone but america
what is the wavelength of a 28Hz periodic wave at 10 meters per second?
Answers
AnswerAnswerAnswerAnswerAnswer:0.3571m
Explanation:
How energy efficiency can reduce energy consumption?
Answers
Answer:
The energy efficiency represents the things you can do with some amount of energy, and if you can do more with less, than it reduces the energy consumption.
Explanation:
The answer to this question is actually very simple. Imagine that you use only the half of the energy you produce, an efficiency of 50%. Lets say you need 5kJ, so you would need to produce 10kJ, because you can consume only the half. Now, imagine you increase the efficiency, you use exactly what you can generate, (efficiency of 100%). In this case, if you needed only 5kJ you would need to generate only 5kJ.
Question 8
If a cheetah can run at a speed of 100 km/h for the initial 500 m of its chase, h
much time would it take to catch its prey that is at a distance of 100 m?
O 1.5 s
O 2.3s
O 3.6s
O 4.8s
Answers
Answer:
3.6 s
Explanation:
100 km/hr =27.77 m/s
100/27.77=3.6 sec
explain the causes of atmospheric pressure and why it changes with altitude?
Answers
Answer:
As altitude increases, the amount of gas molecules in the air decreases—the air becomes less dense than air nearer to sea level. This is what meteorologists and mountaineers mean by "thin air." Thin air exerts less pressure than air at a lower altitude
The amount an object weighs depends on the presence of —.
Answers
Answer:
The weight of an object is dependent upon the value of the acceleration of gravity.
Which type of energy is most important when considering the heating and cooling of a building?
A. thermal energy
B. chemical energy
C. potential energy
D. electrical energy
Answers
Heating and cooling are the kind of energy. The most important energy when considering the heating and cooling of a building is thermal energy. The correct option is A.
What is energy?Energy is the ability to do work.
The temperature of building is increased or decreased due to the season changes. This heating or cooling is a type of energy related to thermal.
Thus, the most important energy when considering the heating and cooling of a building is thermal energy. The correct option is A.
Learn more about energy.
https://brainly.com/question/1932868
#SPJ1
A gas has a variable volume.
True
False
Answers
Answer:
True
Explanation:
Gas always live in free state but some gas is not . We can said that mostly gas volume can be changeable during disturbing by environment situation.
9. An empty, massless cubo is monsured to have all sides equal to 11 cm. It is Ponting in water and will slowly be filled with sand
that has a density of 3.5 g/cm! What volume of sand will cause the box to sink?
Answers
Answer:
please refer to the attachment.
A force of 800 n is used to stop an object with a mass of 50 kg moving with a velocity of 35 m/s. how long will it take to stop this object?
variables:
equations:
answers
Answers
Answer:
KE = F * S initial kinetic energy will expended in stopping object
1/2 M V^2 = F * S
S = 1/2 * 50 * 35^2 / 800 = 38.3 m stopping distance
If you need to know the stopping time involved -
(V2 - V1) = a t where the change in velocity is 35 m/s
a = F / M = 800 / 50 = 16 m/s^2 deceleration of mass
t = 35 / 16 = 2.2 sec
Chris shines a white light onto a surface, and the surface appears to be green. What color will the surface appear if he shines a combination of blue and green light on the surface?.
Answers
Answer: just realized this is more advanced physics so if this doesn't seem right I apologize, I had a really bad physics teacher lol. So ignore this for now!
Hey there! I think this might just be basic color mixing! The color would be a turquoise
Explanation: R G B make up our visible light spectrum. This has documented graphs. Through basic use of one, you can determine that the color would be a blue-green, commonly referred to as turquoise! There are many more color combinations then just this one as well!
a racing car has a uniform acceleration of 5 metre per second square what distance will it cover in 10 seconds after the start
will mark as brainlist
Answers
Given ,
Acceleration, a = 5 m/s^2
time , t = 10 seconds
Initial velocity,u = 0
Final velocity , v = ?
We have ,
v = u + at
=> v = (0)+(5)(10)
=> v = 50 m/s
So you have to rearrange the equation to find distance.
Distance = time * speed
So distance= 5*10
Distance = 50 metres
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answers
Answer:
c because
Explanation:
Plants and trees couldn't thrive without capillary action. Capillary action helps bring water up into the roots. With the help of adhesion and cohesion, water can work it's way all the way up to the branches and leaves.
Answer:
option C
Explanation:
Capillary action is important because it's necessary thing in plants food and oxygen productionIt is done through capillary tubes of diameter 0.1mm and the water rises up high in the trees.So option C is correct
In Alberta, which of the following statements is true?
A. Only adults must be restrained in a vehicle.
B.All children must have booster seats.
C.Babies must be restrained in the front seat only.
D.All occupants must be restrained in a vehicle.
Answers
How do u solve this with steps really need help asap
Answers
Answer:
170 N
Explanation:
Impulse is the change in momentum. Momentum is the product of mass and velocity. These are related to applied force by ...
F·Δt = m·Δv
__
Here, the velocity goes from 0 to 34 m/s in 0.0116 s. The mass is 0.058 kg. Filling in the given values, we have ...
F(0.0116 s) = (0.058 kg)(34 m/s)
F = 0.058×34/0.0116 kg·m/s² ≈ 170 N
The required force is 170 newtons.
The diagram shows a roller-coaster track. Assume that the system is closed. At point D, the roller-coaster is upside-down and at the top of the vertical loop.
which statement best describes the potential and kinetic energies of a roller-coaster car at point D?
Answers
What is the mass of an object that accelerated at 5 m/s2 with a force of 45 n?
Answers
Answer:
9kg.
Explanation:
Data obtained from the question include:
F (force) = 45N
a (acceleration) = 5 m/s2
m (mass) =?
Force is simply the product of mass and acceleration as given by the formula: F = ma. With this formula (i.e F = ma) we can easily calculate the mass of the object. This is illustrated below:
F = ma
m = F/a
m = 45/5
m = 9kg.
Therefore, the mass of the object is 9kg