❤️❤️❤️PLEASE HELP ME WITH THIS QUESTION TWO PARTS❤️❤️❤️

Answer:

Wheres the charts??

Explanation:

Answer:

17.5 m/s

Explanation:

We can calculate the meters per second by dividing the distance by time. 3500 divided by 200 is 17.5, therefore the speed is 17.5 meters per second.

Answer:

  ≈ 6.68 m/s

Explanation:

A suitable formula is ...

  vf^2 -vi^2 = 2ad

where vi and vf are the initial and final velocities, a is the acceleration, and d is the distance covered.

We note that if the initial launch direction is upward, the velocity of the ball when it comes back to its initial position is the same speed, but in the downward direction. Hence the problem is no different than if the ball were initially launched downward.

Then ...

  vf = √(2ad +vi^2) = √(2·9.8 m/s^2·1.0 m+(5 m/s)^2) = √44.6 m/s

  vf ≈ 6.68 m/s

The ball hits the ground with a speed of about 6.68 meters per second.

__

We assume the launch direction is either up or down.

Answer: Solar radiation reflects off the lighter colours, away from the car, thus keeping the car cool

Explanation: This is because lighter colors reflect a good amount of radiation while darker colors absorb it. Just like, Antarctica hasn't completely melted because it reflects a lot of the heat that is acting upon it. Or, you notice that you get hotter when you wear a black shirt opposed to a white one.

Answer:

ok

Explanation:

Have a nice day!

Answer:

if your talking about the velocity after the ball falls, it would be -100m/s

Explanation:

Answer:

a

  [tex]v_2 = 5.6 \ m/s[/tex]

b

   [tex]P_2 = 80600 \ Pa[/tex]

Explanation:

From the question we are told that  

     The pressure of the water in the pipe is  [tex]P_1= 110 \ kPa = 110 *10^{3 } \ Pa[/tex]

      The speed of the water  is [tex]v_1 = 1.4 \ m/s[/tex]

       The original area of the pipe is  [tex]A_1 = \pi \frac{d^2 }{4}[/tex]

       The  new area of the pipe is  [tex]A_2 = \pi * \frac{[\frac{d}{2} ]^2}{4} = \pi * \frac{\frac{d^2}{4} }{4} = \pi \frac{d^2}{16}[/tex]

Generally the continuity equation is mathematically represented as

       [tex]A_1 * v_1 = A_2 * v_2[/tex]

Here [tex]v_2[/tex] is the new velocity  

So

        [tex]\pi * \frac{d^2}{4} * 1.4 = \pi * \frac{d^2}{16} * v_2[/tex]

=>     [tex]\frac{d^2}{4} * 1.4 = \frac{d^2}{16} * v_2[/tex]

=>    [tex]d^2 * 1.4 = \frac{d^2}{4} * v_2[/tex]

=>    [tex]1.4 = 0.25 * v_2[/tex]

=>     [tex]v_2 = 5.6 \ m/s[/tex]

Generally given that the height of the original pipe and the narrower pipe are the same , then we will b making use of the  Bernoulli's equation for constant height to calculate the pressure

This is mathematically represented as

             [tex]P_1 + \frac{1}{2} * \rho * v_1 ^2 = P_2 + \frac{1}{2} * \rho * v_2 ^2[/tex]

Here [tex]\rho[/tex] is the density of water with value  [tex]\rho = 1000 \ kg /m^3[/tex]

             [tex]P_2 = P_1 + \frac{1}{2} * \rho [ v_1^2 - v_2^2 ][/tex]

=>          [tex]P_2 = 110 *10^{3} + \frac{1}{2} * 1000 * [ 1.4 ^2 - 5.6 ^2 ][/tex]

=>          [tex]P_2 = 80600 \ Pa[/tex]

Answer:

\frac{2+\sqrt{3}}{2}

Explanation:

so we simplify tthe denominator first

[tex](1-\sqrt{3})^2=[/tex][tex]4-2\sqrt{3}[/tex]

so the new fraction is:[tex]\frac{1}{4-2\sqrt{3}}[/tex]

We'll ratinalize the fraction to get: [tex]\frac{2+\sqrt{3}}{2}[/tex]

Answer:

blc losing is part of life and u learn how do it again with losing and then you get up and comes to be a winner

Explanation:

Complete option to the question:

A. The asthenosphere is broken up into large continental- and ocean-sized plates.

B. Convection currents within the asthenosphere push magma upward to create new crust.

C. Heat from deep within Earth is thought to keep the asthenosphere malleable.

D. The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.

Answer: The correct option is A (The asthenosphere is broken up into large continental- and ocean-sized plates.)

Explanation:

Among the components that makes up the earth crust are the lithosphere and the asthenosphere.

The LITHOSPHERE is the outer layer of the earth structure which consists of the upper part of the mantle and the crust.

The ASTHENOSPHERE is a part of the upper mantle just below the lithosphere that is involved in plate tectonic movement and isostatic adjustments. It is denser and weaker layer of the upper mantle which permits the movement of tectonic plates in the lithosphere.

The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.Heat from deep within Earth is thought to keep the asthenosphere malleable. And the convection currents within the asthenosphere push magma upward to create new crust. But it is not broken up into large continental- and ocean-sized plates.

Answer:

the collection of eight planets and their moons in orbit round the sun, together with smaller bodies in the form of asteroids, meteoroids, and comets. The planets of the solar system are (in order of distance from the sun) Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.

Explanation:

plz follow me

Answer:

I do not know, but I think I would use the scientific method and use my drawing skills to paint some nice Christmas things.

Explanation:

Answer:

1.the sun must be lined up with the moon and earth all must be aligned for this to happen

Explanation:

Answer:

if it is moving or air is flowing over it yes

Explanation:

Answer:

it can make it stronger!

Answer:

The strength of the magnet in this case is directly proportional to the total voltage sum of all of the batteries

Answer:its D

Explanation: but i think u meant to put not in the question but if u did mean to put not then its A

Answer:

mass and distance

Explanation:

hope this helped

Answer:

The speed is 4m/s because the size is the same.

Explanation:

The speed of the second ball after the collision is 4 m/s.

According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced. As a result, momentum cannot be gained or lost.

Let the mass of each billiard ball is m.

Before collision speed of first billiard ball: u = 4 m/s.

Before collision speed of second billiard ball: U= 0 m/s.

After collision speed of first billiard ball: v = 0 m/s.

After collision speed of second billiard ball: V= ?

From conservation of momentum, we can write:

Total momentum before collision = Total momentum after collision

mu +M.0 = m.0 + m.V

u = V

V = 4 m/s.

The speed of the second ball after the collision is 4 m/s.

Learn more about momentum here:

https://brainly.com/question/29113044

#SPJ2

Explanation:

i need to know the full question

Answer:

As far as it could go

Explanation:

It rolled with it's potential energy, dropping to kinetic energy ;-;

Answer:

10.08 m/s

Explanation:

The average speed of a body or an object can be calculated from the ratio of the total distance traveled by the body/object to that of the time taken to cover the distance.

Mathematically,

Average speed = total distance/total time

The total distance covered by Carl Lewis = 100 m

The total time taken = 9.92 s

Hence,

Average speed of Carl Lewis = 100/9.92

                                         = 10.08 m/s

Answer:

The value is  [tex]w = 7.54 \ m[/tex]        

Explanation:

From the question we are told that

     The length of the crack is  [tex]a = 0.3 \ m[/tex]

     The  frequency is  [tex]f = 30.0 \ kHz = 30 *10^{3} \ Hz[/tex]

      The distance outside the cave that is being consider is  [tex]D = 100 \ m[/tex]

      The speed of sound is [tex]v_s = 340 \ m/s[/tex]

Generally the wavelength of the wave is mathematically represented as

        [tex]\lambda = \frac{v}f}[/tex]

=>     [tex]\lambda = \frac{340 }{30*10^{3}}[/tex]

=>     [tex]\lambda = 0.0113 \ m/s[/tex]

Generally for a  single slit the path difference between the interference patterns of the sound wave and the center  is mathematically represented as  

          [tex]y = \frac{ n * \lambda * D}{a}[/tex]

=>     [tex]y = \frac{ 1 * 0.0113 * 100}{0.3}[/tex]

=>     [tex]y = 3.77 \ m[/tex]

Generally the width of the sound beam is mathematically represented as

         [tex]w = 2 * y[/tex]

=>      [tex]w = 2 * 3.77[/tex]

=>      [tex]w = 7.54 \ m[/tex]        

Answer:

Explanation:

The speed of the rocket can be found by using the formula

[tex]v = \frac{d}{t} \\ [/tex]

d is the distance

t is the time taken

From the question we have

[tex]v = \frac{9000}{12} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:750m/s

Explanation:I got 750m/s :D Hopefully this helped! lol

Answer:

encyclopedia most reliable I think

option b )2004........

Answer:

b) vary with the frequency of the light

Explanation:

The phone electric effect can be expressed as

K.E=(hv -W•)

Where K.E is the Kinectic energy

W• = work function of the metal

ν =frequency of the radiation

h = Planck's constat

Then, we can see that K.E is proportional linearly to "v" in the equation above.

Therefore, When light is directed on a metal surface, the kinetic energies of the photoelectrons vary with the frequency of the light

Answer:

22400 Joules

Explanation:

Apply the formula:

KE = 1/2 . 40 . 1120

KE = 20 . 1120

KE = 22400 Joules