Answers
Answer:
32. CnH2n+2
33. Ester
34. Water and corbondioxide.
35. dibromoethane
Related Questions
a metal rod weighing 123 g with a temperature of 100 c is placed in a 75 ml of water at 25 c if the final temperature of the metal and water is 29 c what is the specific heat capacity of the metal? assume the density of water is 1.0 g/ml and specific heat capacity of water is 4.184 j/g c
Answers
Answer:
What grade r u in
Explanation:
Just bcauz Ima coo dud and 5=5 and 1=1
What does the mass of an object depend on?
Answers
Answer:
the mass of an object depends on inertia greater is the inertia greater will be the mass or vice versa
Explanation:
hope it help ^_^
Mass is the most basic property of matter and it is one of the fundamental quantities. Mass is defined as the amount of matter present in a body. The SI unit of mass is the kilogram (kg). The formula of mass can be written as:
Mass = Density × Volume
The mass of a body is constant; it doesn’t change at any time. Only in certain extreme cases when a huge amount of energy is given or taken from a body, the mass may be impacted. For example, in a nuclear reaction, a tiny amount of matter is converted into a huge amount of energy, this reduces the mass of the substance.
There are various units for calculating mass, like, kilograms, grams, lbs, pounds, etc., but the SI unit of mass is "kilograms" or kg. Every unit of mass can be converted to other units by using a proper conversion formula without affecting the meaning and essence of the quantity to be measured.
HENCE,MASS OF AN OBJECT DEPENDS ON:
size of an atom or moleculesAnd number of atoms and molecules of the body.For more such examples follow this link:
https://brainly.in/question/22612207
1. A 205 g sample of H20 at 25.0 °C is heated until the temperature reaches 75.0 °C. How many
Joules of heat were required to do this? (remember c = 4.184J/g • °C)
Answers
Answer:
i really dont know
Explanation:
byeeeeeeeeeeeee
HELP PLEASE!!!
Which best represents the law of conservation of mass?
A- mass of reactants > mass of products
B- mass of reactants < mass of products
C- mass of reactants = mass of products
D- mass of reactants -> mass of products
Answers
Answer:
c
Explanation:
the input of the mass is always equal to the mass of the outputs
Answer:
The correct answer is C
Explanation:
I did C like they said and it was correct!
What is the number of protons plus the number of neutrons equal to?
A. atomic number
b. atomic charge
c. atomic isotope number
d.mass number
Answers
Answer:
atomic number
Explanation:
The mass number of the atom (M) is equal to the sum of the number of protons and neutrons
Which two statements describe what happens to energy during cellular
respiration?
A. Some chemical energy is transformed into thermal energy
B. Light energy is transferred to molecules of ATP and used to carry
out life processes
O C. Some thermal energy is transformed into chemical energy
D. Chemical energy is transferred to molecules of ATP and used to
carry out life processes.
Answers
Answer:
Chemical energy is transferred to molecules of ATP and used to carry out life processes
AND
Some chemical energy is transformed into thermal energy.
Explanation:
During Cellular respiration, Some chemical energy is transformed into thermal energy and rest Chemical energy is transferred to molecules of ATP and used to carry out life processes.Hence, Option (A) and (D) are correct
What is Cellular rerspiration ?Cellular respiration is a set of metabolic reactions and processes that take place in the cells of organisms to convert chemical energy from nutrients into adenosine triphosphate, and then release waste products.
Therefore, During Cellular respiration, Some chemical energy is transformed into thermal energy and rest Chemical energy is transferred to molecules of ATP and used to carry out life processes. Hence, Option (A) and (D) are correct
Learn more about Respiration here ;
https://brainly.com/question/12605249
#SPJ2
Which statement about the electron cloud model is ttue
Answers
What must occur in order for a chemical reaction to be specifically classified as endothermic instead of
exothermic?
Atoms are rearranged.
Chemical bonds are formed.
Energy is released in the form of heat.
Energy is absorbed in the form of heat.
Answers
Answer:
A
Explanation:
What must happen in order for a chemical reaction to be specifically classified as endothermic instead of exothermic is that energy is absorbed in the form of heat.
Chemical reactions can be exothermic or endothermic depending on whether it gives off or absorb energy (in the form of heat).
When energy is given off by a reaction, the temperature of the reaction vessel becomes warmer than the initial temperature before the reaction. Such a reaction is said to be exothermic.
For endothermic reactions, heat energy is absorbed from the surrounding. Thus, the reaction vessel appears colder when compared to the initial temperature before the reaction.
More on exothermic and endothermic reactions can be found here: https://brainly.com/question/4345448
PLEASEE ANSWER FASST
Answers
Sir Isaac Newton developed a law that describes the gravity between bodies of matter called _________________________________.
Answers
Answer:
Universal law of gravitation
what do isotopes have in common
Answers
Answer:
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons. The difference in the number of neutrons between the various isotopes of an element means that the various isotopes have different masses.
(if this help pls mark as brainliest :))
Answer:
Number of protons
Explanation:
Isotopes are the same atom of an element with same
number of protons but different number of Neutrons.
According to ______Law, if the temperature remains constant, doubling the pressure will _______the volume of the gas.
Answers
Answer: According to Boyle's Law, if the temperature remains constant, doubling the pressure will halve the volume of the gas.
Explanation:
What happens when a Bose-Einstein condensate forms?
A. A large atom is split into many smaller atoms temporarily.
B. The atoms of the solid condense into one large superatom.
C. It causes all matter touching it to condense into a liquid.
D. The electrons separate from the nuclei forming a mass of unbound positive and negative charges.
Answers
Answer:
the answer would be B
Explanation:
The atoms of the solid condense into one large superatom. Hence, option B is correct.
What are atoms?An atom contains a central nucleus surrounded by one or more electrons.
Bose-Einstein condensation occurs at a temperature very close to absolute zero i.e 273.15 degrees centigrade. Under such conditions, a large quantity of Boson occupies the lowest quantum state, at which point microscopic quantum phenomena become apparent macroscopically. A BEC is formed by cooling a gas of extremely low density about one hundred thousandth the density of normal air, to ultra-low temperature.
Hence, option B is correct.
Learn more about atoms here:
brainly.com/question/1566330
#SPJ5
how many energy levels do aluminum, argon and sodium have?
plz help
Answers
Answer:
aluminum - 3,argon - 3,sodium - 3
Explanation:
Matt's cube, after 5 trial, had an average destiny of 7.40. g/cm what is it made of ?
Answers
Explanation:
5 trial, had an average destiny of 7.40. g/cm
Which one would it be?
Answers
Answer:
it would be C! 0.0520 Km
A metal ‘X’ has high melting point, good conductor of electricity, and is most malleable. Then the metal ‘X’ is A) Cu B) Au C) Fe D) Pt
Answers
Answer:
A) Cu
(copper)
Which shell is the outermost for oxygen?
A 192
B. 292
C. 252P
D. 2P
Answers
Answer:
D is the answer
Which describes a property of water that allows plants to transfer it from their roots to their leaves?
O Water exhibits weak adhesion and cohesion, which allows capillary action to occur.
O Water exhibits strong adhesion and cohesion, which allows capillary action to occur.
Water has low surface tension, which prevents capillary action from occurring.
Water has high surface tension, which prevents capillary action from occurring.
Answers
Answer:
B water exhibits weak adhesion and cohesion which allows capillary action to occur.
Explanation:
took the test
Water exhibits strong adhesion and cohesion, which allows capillary action to occur.
What property of water allows it to move through a plant?The cohesive properties of water (hydrogen bonding between adjacent water molecules) allow the column of water to be 'pulled' up through the plant as water molecules are evaporating at the surfaces of leaf cells. This process has been termed the Cohesion Theory of Sap Ascent in plants.
What are adhesion and cohesion?Cohesion and adhesion are two water properties that describe how water molecules interact with each other. and how water molecules interact with other things like leaves or even you. Cohesion means that water likes to stick to itself and adhesion means that water likes to stick to other things.
Learn more about cohesive properties here https://brainly.com/question/18200549
#SPJ2
Molding a shape from soft, malleable material (clay or plaster) or constructing a shape from harder material (such as metal or paper). Molding is what a child does with Play-Doh or origami.
Answers
Complete question is;
Molding a shape from soft, malleable material (clay or plaster) or constructing a shape from harder material (such as metal or paper) is called what?
Molding is what a child does with Play-Doh or origami
Answer:
Modeling
Explanation:
In chemistry, we have a branch called modeling chemistry. In modeling, we organize together a series of models instead of a collection of topics. In this approach, we will begin with a phenomena that can be readily observed and are gradually develop the simplest model of matter that helps us make sense of our observations.
Now in the question, we are Molding a shape from soft, malleable materials like clay/plaster or constructing from harder materials like metal/paper. This means that we are organizing a series of models from either soft & malleable or harder materials to produce a simple model shape.
Thus, this is simply modeling.
What do hydrologists primarily study?
O A. Stars
O B. Rocks
O c. Water
O D. Weather
Answers
water is 11.19% hydrogen and 88.1% oxygen by mass. Lake superior contains about 1.2x10 kg of water. what mass of hydrogen is contained in lake superior
Answers
Answer:
mass of hydrogen in lake = 11.19% of 12
= 1.3428
check if question is correct or not
Explanation:
Water is 11.19% hydrogen and 88.1% oxygen by mass. Lake superior contains about 1.2x10 kg of water the mass of hydrogen is 1.32 kg
What is mass?Mass is defined as a unit of measurement that describes the amount of matter that makeup an object.
It can also be defined as quantitative measures of inertia, fundamental properties of all matter. It is a dimensionless quantity.
As given 11.19% hydrogen is present in 1.2 x 10 kg
So, the mass of hydrogen = 11.198 % of 1.2 x 10 kg
= 11.19 / 100 x 12
= 1.32 kg
Thus, water is 11.19% hydrogen and 88.1% oxygen by mass. Lake superior contains about 1.2x10 kg of water the mass of hydrogen is 1.32 kg.
To learn more about mass, refer to the link below:
https://brainly.com/question/15959704
#SPJ2
PLEASE HELP The arrows in the chart below represent phase transitions.
Three bars are shown labeled Solid, Liquid, and Gas. They are connected by arrows labeled 1 to 6. Arrow 1 points from liquid to gas; arrow 2 from solid to liquid, arrow 3 from solid to gas, arrow 4 from gas to liquid, arrow 5 from liquid to solid, and arrow 6 from gas to solid.
Which arrows represent the phase transitions in which heat energy is gained?
1, 2, and 3
2, 3, and 5
3, 4, and 5
4, 5, and 6
Answers
1, 2, and 3
hope it helps next time upload with picture
Calculate the volume of a sample of iron that has a density of 6.8 g/mL and a mass of 6780 mg.
Answers
Answer:
m= 6780mg = 6.78g = 6.8g
d= 6.8g/ml
V= m/d
V= 1ml
why are group viia elements very active nonmetals
Answers
WILL MARK BRAINLIEST
7. When the numbers 5.56 x 10^2 and 3.81 x 10^3 are added the result is:
a) 4.36 x 10^3
b) 4.366 x 10^3
c) 4.366 x 10^2
d) 4.37 x 10^3
Answers
Answer:
option b
Explanation:
556+3810
=4366
=4.366*10^3
Hope it helps
Pls mark as brainliest
2. If an eagle is flying at a constant speed, it is accelerating. True or
False
Answers
Answer:
False
Explanation:
Answer:
:0
Explanation:
can someone help me please
Answers
Answer:
A
Explanation:
the circles are more tightly packed together in box A than in box B in the same amount of space
The first record of the scientific method being used was approximately
O A) 600 years ago.
O B) 3,000 years ago.
O C) 50 years ago.
O D) 1.200 years ago.
Answers
Answer:
600 years ago
Explanation:
it was first recorded by England's Sir Francis Bacon (1561-1626)
What are the three types of symbiosis?
Answers
Answer:
commensalim, mutualism, parasitism