PLEASE HELP 100 POINTS! Please fill in the scale distance from sun and diversion factor, listing off the numbers works

Answer:

A is the load in the diagram

Answer:

i think the answer is A

Hey there! Hope this answer helps.

Answer:

- profparis

Answer:

C. A light bulb shines

Explanation:

When electricity flows through a circuit and powers the light bulb, the light bulb would shine.

The answer isn't B because if the battery was only connected to the circuit without the circuit being turned on by the switch, electricity would not flow from the battery to the light bulb.

Answer:

schizophrenia is a chronic disease meaning it doesn't go away. It affects a person mentally, and on a daily basis is hard to see who or what is reality or an illusion. People with schizophrenia have a hard time getting a job, because it's hard to focus.

Most stigmas people have with schizophrenia is paranoid, or insane. They think something or someone is following them because they see something that makes them uncomfortable all the time.

Explanation:

Hi there!

Recall the equation for magnetic flux.

[tex]\Phi _B = \oint B \cdot dA[/tex]

We can also rewrite this as:

[tex]\Phi_B = B \cdot A = BAcos\phi[/tex]

B = Magnetic field strength (T)
A = Area of surface (m²)

φ = angle between the surface's area vector and magnetic field

Since the rectangular surface is horizontal, its perpendicular area vector points straight UP.

The magnetic field makes an angle of 32° with the surface but makes an angle complementary to this angle with the AREA VECTOR. (Think: the vertical)

Complementary of 32° ⇒ 90° - 32° = 58°

Now, we can rearrange the above equation to solve for the magnetic field.

[tex]\Phi_B = BA cos\phi \\\\B = \frac{\Phi_B}{Acos\phi}\\\\B = \frac{3.6 \times 10^{-4}}{(0.03 * 0.042)cos(58)} = \boxed{0.539 T}[/tex]

Answer:

Nothing

Explanation:

We get struck by small asteroids. imperciptable changes in our degree of tilt and rate of rate of rotation

Answer:

LED stands for light emitting diode. LED lighting products produce light up to 90% more efficiently than incandescent light bulbs.

1)The period of these ripples will be 0.2 sec.

2)The time period of sound wave will be 100 Hz.

3)The frequency of the sound wave will be 5×10⁶ Hz.

Frequency is defined as the number of repetitions of a wave occurring waves in 1 second.

Frequency is given by the formula as,

Frequency of  ripples (f₁)=5 Hz

The period of these ripples will be;

T₁=1/f₁

T₁=1/5

T₁=0.2 sec

The time period of sound wave (T)=0.01 seconds

The time period of sound wave;

f=1/T

f=1/0.01

f=100 Hz

Time period of A radio wave = 0.0000002 seconds

The frequency of the sound wave is;

f=1/T

f=1/0.0000002

f=5×10⁶ Hz

Hence,the period of these ripples will be 0.2 sec.

To learn more about the frequency, refer to the link;

https://brainly.com/question/14926605

#SPJ1

Sonar is used to determine the speed of an object. The object is moving at 8.4146 m/s.

The frequency of any wave is defined as the number of cycles per second.

The frequency of the sound received is

f' = f x [(V+Vo /V-Vo)]

where f = 40kHz, f' = 42kHz, V =345 m/s, then the velocity of the observer will be

(V+Vo /V-Vo) = 42/40 =1.05

On rearranging the doppler shift formula, we have

Vo = 0.05 x 345 /2.05

Vo = 8.4146 m/s.

Thus, the object is moving at 8.4146 m/s.

Learn more about frequency.

https://brainly.com/question/14320803

#SPJ1

I'm going to school tomorrow so I can get the best of it

Answer:

Clark Hull put the emphasis of his work on experimentation, an organized theory of learning, and the nature of habits, which he argued were associations between a stimulus and a response

Explanation:

Answer:

290.4 joules

Explanation:

As the formula to find kinetic energy is 1/2 mv^2.

So if we put the given data in it,the answer comes 290.4 joules

Answer:

low.

Explanation:

it makes the flow easier if its lower because, the resistance isn’t pushing as hard against the flow which means that the flow is easier.

Answer:

.0882 s

Explanation:

Sound has to travel to the bottom (15 m) then back up (15m ) to hear the echo

(15 + 15 m) / 340 m/s = .0882 s

Answer:

Staying single makes it a whole lot easier to focus on yourself, gain self love, and work on yourself!

Explanation:

[tex]\huge{\boxed{{\colorbox{red}{1 N}}}}[/tex]

that's my answer

vf²=vi²-2ad (vf=0, stop)

vi²=2ad

200²=2.a.5

a = 200² : 10

F = ma

F = 25 x 200² : 10

F = 1 x 10⁵ dyne = 1 N

Answer:

[tex]period = 4s[/tex]

Explanation:

[tex]period = \frac{total \: time}{number \: of \: cycles} [/tex]

[tex]period = \frac{12}{3} [/tex]

[tex]period = 4s[/tex]

The magnitude of the vertical force that a concrete support exerts on the bridge at the far end is 201.25 N.

The force is an action of push or pull which makes a body to move or stop.

Given is the weight of tourist W = 805 N and L is the length of the bridge.

Let the reaction force at both the ends of the bridge is R1 and R2.

Taking the moments about point A,

R1 x 0 - W x L/4 +R2 x L =0

R2 = W/4

R2 = 805 /4

R2 = 201.25 N

Thus, the magnitude of the vertical force that a concrete support exerts on the bridge at the far end is 201.25 N.

Learn more about force.

https://brainly.com/question/13191643

#SPJ1

The magnitude of the acceleration and its direction however depends on the resultant force.

In a system of forces, the resultant force is the force that has the same effect in magnitude and direction as all the forces acting together.

In an inclined plane, the friction, weight and applied force all act together on the object. The magnitude of the acceleration and its direction however depends on the resultant force.

This question is incomplete as the diagrams are missing hence the numerical values can not be computed.

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

v² = u² + 2as

v² = 4² + 2 × 1.2 × 20

v² = 16 + 2 × 12/10 × 20

v² = 16 + 48

v² = 64

v = 8 ms - 1

ii)

V = u + at

8 = 4 + 1.2 × t

8 - 4 = 1.2t

4 = 12/10 t

4 × 10 /12 = t

3.33 = t

Average velocity = Displacement/Time

20/3.33

6.006 ms - 1

F = m.a

a = F/m

a = 1850/500

a = 3.7 m/s²

Answer:

1st law--Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia. The key point here is that if there is no net forceacting on an object (if all the external forces cancel each other out) then the object will maintain a constant velocity. If that velocity is zero, then the object remains at rest. If an external force is applied, the velocity will change because of the force.

2nd— The second law explains how the velocity of an object changes when it is subjected to an external force. The law defines a force to be equal to change in momentum(mass times velocity) per change in time. Newton also developed the calculus of mathematics, and the "changes" expressed in the second law are most accurately defined in differential forms. (Calculus can also be used to determine the velocity and location variations experienced by an object subjected to an external force.) For an object with a constant mass m, the second law states that the force F is the product of an object's mass and its acceleration a:

F = m * a

For an external applied force, the change in velocity depends on the mass of the object. A force will cause a change in velocity; and likewise, a change in velocity will generate a force. The equation works both ways.

3rd law-- The third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal force on object A. Notice that the forces are exerted on different objects. The third law can be used to explain the generation of lift by a wing and the production of thrust by a jet engine.

Answer:

a

0.57g

b

20.52

c

28.5

Explanation:

a

The bottle weighs 80g with tablets

If the bottle alone weighs 23g, the tablets weigh 57g

100 tablets weigh 57g, 1 tablet weighs 0.57g

b

0.57g is one tablet, so to achieve 36 tablets we must multiply by 36

0.57 multiplied by 36 is 20.52

c

To find 50 tablets we can use the same method we used before or a slightly faster method

100 tablets is 57g, so all we have to do is halve to find 50

57 divided by 2 is 28.5

The incidence is maybe 26=9

Answer:

Answer:

W = 3F

Explanation:

Work is defined as the inner product between force and displacement. The inner product picks out the force components which point in the same direction as the displacement. The vertical components do not matter in the horizontal displacement. I am assuming you're dealing with 1-dimensional motion? Then the work would be:

[tex]W=Fd[/tex]

The displacement is 3 meters. Therefore, the work is:

[tex]W=3F[/tex]

You haven't gave the force being applied to the object, so I cannot give an explicit answer. Just multiply the force by 3 to get the work.

Answer:

7 hrs

Explanation:

56 km / 8 km/hr = 7 hr

The contents of your résumé should always be relevant.

A resume is a brief information about a person's academic life achievements and organizational experience stated in short in order to get a highly paid job.

A resume should include all the relevant information that help the employers easily shortlist candidates of their choice relating the job profile. It is understandable by resume that who you are and why you're a good fit for the job.

Thus, the contents of your résumé should always be relevant.

Learn more about resume.

https://brainly.com/question/862477

#SPJ1

Answer:

The greater the period the faster the wave moves (Figure 10.5).

Explanation: