Please answer the match the wave to the description and the top part 25 points

First, we need to convert the food calories into regular calories by multiplying by 103: 715 x 103 = 73,645 calories.

Next, we need to determine how much work the weight-watcher needs to do to burn off those calories. We can use the formula: work = force x distance, where force = mass x gravity and distance is the height the person needs to climb.

So, work = (98.8 kg)(9.8 m/s^2)(distance), We know that the work required to burn off 73,645 calories is equivalent to the work done by climbing a certain height, so we can set these two expressions equal to each other: work = 73,645 calories .

(98.8 kg)(9.8 m/s^2)(distance) = 73,645, Simplifying and solving for distance: distance = 73,645 / (98.8 x 9.8)
distance = 75.02 meters, Finally, we convert meters to kilometers: 75.02 m = 0.07502 km

So the weight-watcher needs to climb approximately 0.075 km to burn off the equivalent of a large piece of chocolate cake.

To know more about force click here

brainly.com/question/29044739

#SPJ11

The minimum distance between the two people who hear no sound is approximately 7.92 meters.

In this scenario, the sound waves of frequency 557 Hz enter a 1.25 m wide window in a theater. The theater is acoustically prepared to prevent the reflection of sound waves. We need to find the minimum distance between two people who hear no sound.
Since the angle may be too large to use the small angle approximation, we can use the sine formula for the diffraction of sound waves: sin(θ) = λ/d
where θ is the angle of diffraction, λ is the wavelength of the sound wave, and d is the width of the window.
First, we can find the wavelength (λ) using the formula: λ = v/f
where v is the speed of sound (330 m/s) and f is the frequency (557 Hz).
λ = 330 m/s / 557 Hz = 0.592 m
Now we can find the angle of diffraction (θ) using the sine formula:
sin(θ) = λ/d = 0.592 m / 1.25 m = 0.474
θ = arcsin(0.474) ≈ 28.81°
Since the people are sitting along the opposite wall, which is 15 m away from the window, we can use basic trigonometry to find the minimum distance between them:
distance = 2 * (15 m * tan(θ/2))
distance = 2 * (15 m * tan(28.81°/2))
distance ≈ 7.92 m

Learn more about diffraction here: https://brainly.com/question/12290582

#SPJ11

The time rate of change of the electric field between the plates of the parallel-plate capacitor in air is 8.20 x 10^7 N/C/s.

A parallel-plate capacitor with circular plates of radius 2.9 cm and a separation of 1.1 mm has charge flowing onto the upper plate and off the lower plate at a rate of 6 A.

To find the time rate of change of the electric field between the plates, we can use the formula:

dE/dt = (dQ/dt) / (ε₀ * A)

Where dE/dt is the time rate of change of the electric field, dQ/dt is the rate of charge flow (6 A), ε₀ is the vacuum permittivity (8.85 × 10⁻¹² F/m), and A is the area of the circular plates.

First, calculate the area of the circular plates:

To find the time rate of change of the electric field between the plates of the parallel-plate capacitor in air, we can use the formula:

dE/dt = (I/Aε0)

Where dE/dt is the time rate of change of the electric field, I is the current flowing onto the upper plate and off the lower plate (which is given as 6 A), A is the area of the plates (which is πr^2, where r is the radius of the plates), and ε0 is the permittivity of free space (which is a constant value of 8.85 x 10^-12 C^2/Nm^2).

Substituting the given values, we get:

dE/dt = (6/(π(0.029)^2)(8.85 x 10^-12)

Simplifying this expression, we get:

dE/dt = 8.20 x 10^7 N/C/s

To learn more about electric field click here

brainly.com/question/8971780

#SPJ11

The emergency plan at a nuclear electric power plant must include a means for notification of the public living within of the plant within a 15-minute (c). 10 miles is correct option.

The emergency plan at a nuclear power station in the United States must contain measures for notifying the public living within a 10-mile radius of the plant within a 15-minute window in case of an emergency, under Nuclear Regulatory Commission (NRC) standards for emergency preparedness at nuclear power facilities in the country.

This criterion was put in place to guarantee that, in the event of an issue or accident at a nuclear power station, local residents would be promptly informed and might take the necessary precautions to protect themselves. To reach residents within the specified radius, the emergency notification system often uses broadcast messages, sirens, and other forms of communication.

Therefore, the correct option is (c).

To know more about emergency

https://brainly.com/question/1032569

#SPJ4

To construct an inductor of a given inductance using copper wire and a plastic tube, the student will also need a magnetic core.

An inductor is a passive electronic component that is used to store energy in a magnetic field. It consists of a coil of wire wound around a magnetic core, which is usually made of a ferromagnetic material such as iron or ferrite. The magnetic core enhances the magnetic field created by the coil and increases the inductance of the inductor.

The plastic tube can be used to create a form for the coil of wire. The copper wire will be wound around the plastic tube to create the coil. However, without a magnetic core, the inductance of the coil will be very low, and it may not function as an inductor at all.

The choice of magnetic core material will depend on the specific application and the frequency range of the circuit. In some cases, air can be used as the core material, but in most cases, a magnetic material is required to achieve the desired level of inductance.

In summary, to construct an inductor of a given inductance using copper wire and a plastic tube, the student will need a magnetic core in addition to the copper wire and plastic tube.

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ11

Answer: 144 km/h

Explanation:

The distance between Toronto and Waterloo is 288 km. The student traveled from Toronto to Waterloo at a speed of 96 km/h, so the total distance traveled is 288 km (96 * 3). The student traveled back from Waterloo to Toronto in 2 hours, so the average speed on the way back is 144 km/h (288 / 2).

However, we cannot know the exact speed on the way back without knowing the student's exact route. If the student took the same route on the way back, then the average speed is 144 km/h. However, if the student took a different route on the way back, then the average speed could be different. For example, if the student took a more direct route on the way back, then the average speed could be higher. If the student took a more scenic route on the way back, then the average speed could be lower.

Therefore, the best answer to the question is that the average speed on the way back is 144 km/h assuming the student took the same route back.

Answer:

B

Explanation:

A lot to type out lol

Your answer: A) Mechanical weathering does not affect metamorphic rocks. This statement is incorrect because mechanical weathering can affect all types of rocks, including metamorphic rocks.

Metamorphic rocks are a type of rock that forms from the transformation of existing rocks under high heat, pressure, or chemical activity, without completely melting the original rock. The original rock, called the parent rock, can be either sedimentary, igneous, or metamorphic rock. During metamorphism, the parent rock changes its texture, mineralogy, and chemical composition. These changes occur in response to the intense heat and pressure that the rock is subjected to, as well as to chemical reactions between the rock and fluids circulating through it. As a result, metamorphic rocks often have distinctive foliation, which is a layering of minerals that gives the rock a banded appearance. There are many different types of metamorphic rocks, each with its characteristics and origins.

Learn more about metamorphic rocks here:

https://brainly.com/question/2379467

#SPJ11

The statement that is incorrect is A) Mechanical weathering does not affect metamorphic rocks. Mechanical weathering can affect all types of rocks, including metamorphic rocks.
Your answer: The incorrect statement is A) Mechanical weathering does not affect metamorphic rocks. In reality, mechanical weathering can affect all types of rocks, including metamorphic rocks.

Unfortunately, there is no list of statements provided for me to review and identify which statement is incorrect. Could you please provide me with the statements you are referring to?

learn more about incorrect here;

https://brainly.com/question/27647275

#SPJ11

The idea that heavy objects fall faster than lighter objects was originally attributed to the ancient Greek philosopher Aristotle.

He believed that the speed at which an object falls is directly proportional to its weight. However, this idea was later challenged by Galileo Galilei, an Italian physicist and astronomer, who conducted experiments that showed that objects of different weights actually fall at the same rate in the absence of air resistance. Galileo's findings contributed to the development of modern physics and laid the groundwork for the theory of gravity formulated by Sir Isaac Newton.

Learn more about heavy objects here:

https://brainly.com/question/28543744

#SPJ11

Faraday liquefied chlorine gas.

Michael Faraday was the first scientist to liquefy gases, and he was able to liquefy several gases including chlorine, hydrogen, nitrogen, oxygen, and carbon dioxide. However, the first gas that he successfully liquefied was chlorine in 1823.

This was a significant breakthrough in the study of gases and led to the development of the field of cryogenics.

Faraday used a specially designed apparatus, consisting of a glass cylinder filled with dry chlorine gas that was surrounded by a larger cylinder filled with cold water. By applying pressure to the gas, and then cooling it with ice and salt, Faraday was able to condense the chlorine into a clear, amber-colored liquid.

This was an important achievement because it demonstrated that gases could be liquefied under the right conditions, paving the way for further advancements in the study of gases and their properties.

To learn more about Faraday, click here:

https://brainly.com/question/31516127

#SPJ11

99.16 Newtons is the new force of attraction between the particles.

The forces that hold atoms together to create molecules and solids are referred to as chemical bonds. The attraction between the electrons of one atom and the nuclei of another atom as a result of this electric force is what is known as a chemical bond.

[tex]F = (kq1q2)/r^2[/tex]

[tex]9,916 = (kq1q2)/r^2[/tex]

[tex]F = (k*(q1/5)*(q2/5))/(2r)^2[/tex]

[tex]F = (1/100)((kq1*q2)/(r^2))[/tex]

So, the new force of attraction is:

[tex]F = (1/100)*9,916 = 99.16[/tex]Newtons (rounded to 4 decimal places)

To know more about Newtons visit:-

https://brainly.com/question/3273157

#SPJ1

The answer is b. The air gap between the end of the faucet and the overflow rim of the sink should be 2 times the diameter of the supply pipe.

Air gaps are used to protect critical computer systems and the data they store from malware, keyloggers, ransomware, and other types of unauthorized access. This strategy seeks to ensure the total isolation of a given system electromagnetically, electronically, and physically.

A simple example is the vertical space between a wall-mounted faucet and the sink rim (this space is the air gap).

Water can easily fall from the faucet into the sink, but there is no way that water can be drawn up from the sink into the faucet.

Learn more about diameter here:- https://brainly.com/question/5501950

#SPJ11

The rate of increase in water pressure on Mustafa while diving is 0.992 atm/m. This means the water pressure increases by 992 atm for every kilometer Mustafa descends while diving.

The question asks us to convert the rate of increase in water pressure from atm/m to atm/km.

To convert atm/m to atm/km, we can multiply by 1000 (since there are 1000 meters in a kilometer)

0.992 atm/m * 1000 m/km = 992 atm/km

Therefore, the rate of increase in water pressure in atm/km is 992 atm/km.

This conversion is necessary because the given rate is in units of atm/m, which represents the increase in water pressure per meter of depth.

To know more about water pressure:

https://brainly.com/question/15437827

#SPJ4

----The given question is incomplete, the complete question is given

" The water pressure on Mustafa while he is diving is increasing at a rate of 0.992 atm per meter. What is the rate of increase in water pressure in atm per km?"--

The major controversy associated with injury as the result of microwave exposure deals with c. Prolonged low levels of exposure. This has been a topic of debate as it is uncertain whether long-term exposure to low levels of microwaves may have adverse health effects.

The major controversy associated with injury as the result of microwave exposure deals with all of the given options, but specifically, the debate revolves around whether prolonged low levels of exposure to microwaves can cause adverse health effects such as leukemia, high levels of microwave absorption leading to tissue damage, the development of cataracts, and other health problems. While some studies suggest that microwave exposure at high levels can cause harm, the evidence regarding the long-term health effects of low-level microwave exposure is still inconclusive and requires further research.

Learn more about leukemia here:

https://brainly.com/question/31415905

#SPJ11

If the pulley has 5 sections, it means that it is a block and tackle system with a mechanical advantage of 5. This means that the force required to lift the box is 1/5 of the weight of the box.

Force for each section = Force required to lift the box / Number of sections

Force for each section = 50 N / 5

Force for each section = 10 N

Therefore, the Newton of force for each section is 10 N.

The IMA (ideal mechanical advantage) of a pulley system is calculated by dividing the distance over which the effort force is applied by the distance over which the load is moved. Since the pulley system does not change the direction of the applied force, the IMA is simply equal to the number of sections in the pulley.

IMA = Number of sections

IMA = 5

The formula for IMA (ideal mechanical advantage) of a simple machine is:

IMA = Distance over which the effort force is applied / Distance over which the load is moved

In the case of a pulley system, the formula can be simplified to:

IMA = Number of sections

This is because the pulley system does not change the direction of the applied force, and each section of the pulley contributes to the mechanical advantage equally.

More on the pulley system can be found here: https://brainly.com/question/13736362

#SPJ1

The tangential velocity of the Mars Global Surveyor is 12,151.8 kilometers per hour.

To find the tangential velocity of the Mars Global Surveyor, we need to first determine the circumference of its orbit around Mars and then divide it by the time it takes to complete one orbit.

1. Calculate the total radius of the orbit (radius of Mars + altitude of the spacecraft):
Total radius = 3390 km (average radius of Mars) + 380 km (altitude of the spacecraft) = 3770 km

2. Calculate the circumference of the orbit using the formula C = 2πr:
Circumference (C) = 2 * π * 3770 km ≈ 23693.6 km

3. Calculate the tangential velocity using the formula v = distance/time:
Tangential velocity (v) = 23693.6 km / 1.95 hours ≈ 12151.8 km/h

So, the Mars Global Surveyor's tangential velocity is approximately 12,151.8 kilometers per hour.

Know more about tangential velocity here:

https://brainly.com/question/28738284

#SPJ11

The correct answer is b.) 2.5 to 4.0 times. The pressure rating of the distribution system piping should be 2.5 to 4.0 times higher than the normal operating pressure.

The pressure rating of piping is the maximum pressure that the piping can withstand without failure. It is important to ensure that the pressure rating of the piping is higher than the maximum pressure that will be experienced during normal operation.

The normal operating pressure is the pressure at which the system is designed to operate under normal conditions. The pressure rating of the piping should be higher than the normal operating pressure to account for fluctuations in pressure that may occur during operation.

A factor of 2.5 to 4.0 times higher than the normal operating pressure is typically recommended for the pressure rating of the distribution system piping. This ensures that the piping can safely withstand any pressure fluctuations that may occur during normal operation, as well as providing a safety factor for any unforeseen circumstances.

To know more about fluctuations

brainly.com/question/27419417

#SPJ11

In a rectangular furnace, the grates are typically arranged in rectangular shapes. Grates are horizontal bars or grids that are used in a furnace for supporting the fuel, such as wood, coal, or other combustible materials, during combustion.

Grates are arranged in a rectangular pattern to provide structural support and allow for efficient burning of the fuel. The rectangular arrangement of grates allows for even distribution of heat and combustion air, facilitating the combustion process in the furnace. Grates in a furnace serve multiple purposes. They support the fuel, such as wood or coal, allowing it to burn evenly and efficiently. They also provide spaces or gaps between the bars, which allow for the passage of air, oxygen, and combustion gases. This helps to regulate the airflow and maintain proper combustion conditions within the furnace.

Learn more about furnace here:

https://brainly.com/question/27625744

#SPJ11

The most dramatic consequence of global warming is likely to be the rising sea level, as it could lead to displacement of populations, loss of land, and damage to infrastructure.

However, it is important to note that all of the options listed (loss of biodiversity, human illness, rising sea level, and diminishing crop yields) are potential consequences of global warming and all have serious impacts. In addition to land loss, rising sea levels will also lead to increased flooding, more intense storm surges, and saltwater intrusion into freshwater sources. This could potentially lead to water shortages, crop failures, and disruption of livelihoods. In short, rising sea levels due to global warming will have a drastic and wide-ranging impact on society and the environment.

To learn more about global warming click here https://brainly.com/question/3553382

#SPJ11

The displacement current between the plates is approximately [tex]1.58557 * 10^{-5} mA[/tex].

To find the displacement current between the parallel plates of a capacitor, we can use the following equation:
Displacement current (I_d) = ε₀ * (dV/dt) * (A/d)
where:
- ε₀ is the vacuum permittivity ([tex]8.85 ** 10^{-12} F/m[/tex])
- dV/dt is the rate of change of potential difference (107 V/s, given in the question)
- A is the area of the plates (0.202 m², given in the question)
- d is the separation of the plates (1.21 cm = 0.0121 m, given in the question)
Now, plug in the values:
I_d = [tex](8.85 *10^{-12} F/m) * (107 V/s) * (0.202 m^2 / 0.0121 m)[/tex]

I_d = [tex]1.58557 * 10^{-8} A[/tex]
To convert this to milliamperes (mA), multiply by 1000:
I_d = [tex]1.58557 * 10^{-5} mA[/tex]

To learn more about potential difference click here https://brainly.com/question/12198573

#SPJ11

(300-13(A)) Conductors in raceways must be continuous between outlet devices and there shall be no splice or tap within a raceway itself.

This means that the conductors must run uninterrupted from one outlet device to another, and any connections or splices must be made outside of the raceway. Splices or taps within the raceway can create safety hazards and increase the risk of electrical failure. Therefore, it is important to ensure that all conductors are properly installed and connected to outlet devices without any splices or taps within the raceway.
According to the National Electrical Code (NEC) 300-13(A), conductors in raceways must be "continuous" between outlet devices, and there shall be no splice or tap within a raceway itself. This means that the conductors must run uninterrupted from one outlet device to another without any breaks or connections within the raceway.

Visit here to learn more about Conductors:

brainly.com/question/8426444

#SPJ11

The ratio of the angular speed of the endpoint to the point L/2 from the end of the rod is 1:2, which is option B.

The ratio of the angular speed of a point on the end of the rod to that of a point a distance L/2 from the end of the rod can be determined using the formula for angular velocity, which is equal to linear velocity divided by the radius. Since both points are on the same rigid body (the rod), they have the same angular velocity.

However, the linear velocity of the point on the end of the rod is twice that of the point a distance L/2 from the end of the rod, because the radius of the endpoint is twice that of the other point.

Learn more about the angular speed at https://brainly.com/question/25279049

#SPJ11

Flexible metallic tubing may be utilised as long as it is installed according to the manufacturer's instructions and is not subject to physical harm.

Flexible metal conduit (FMC), also known as flexible metallic tubing (FMT), may be used as long as it is installed in compliance with the manufacturer's instructions and all relevant laws and regulations. Due to its flexibility and ease of installation, FMC is frequently utilised as a wiring enclosure in places where typical rigid conduit may be challenging to install. FMC must not be used in locations where it is susceptible to physical harm, such as those that are impact or vibration-prone or where it could be crushed or abraded. It is not appropriate for all applications. In these situations, it is necessary to employ more robust conduit choices to guarantee the integrity and safety of the electrical wiring system.

learn more about Flexible metallic tubing here:

https://brainly.com/question/17193235

#SPJ11

The waves are traveling at approximately 1.02 meters per second.

To calculate the speed of the waves, we need to first determine the period (T) and wavelength (λ) of the waves.
1. Period (T): Since the boat moves from its highest point to its lowest in 2.90 seconds, and this represents half of the wave period (from crest to trough), we can calculate the full period by multiplying by 2:
T = 2.90 s * 2 = 5.80 s
2. Wavelength (λ): The horizontal distance between wave crests is given as 5.90 m, which represents the wavelength.
λ = 5.90 m
3. Now, we can use the formula for wave speed (v) to find how fast the waves are traveling:
v = λ / T
v = 5.90 m / 5.80 s
v ≈ 1.02 m/s

learn more about wavelength Refer: https://brainly.com/question/13533093

#SPJ11

As temperatures rise, the Earth's ice caps and glaciers begin to melt, which increases the volume of water in the ocean and causes sea levels to rise. The correct answer is option: 3.

This melting is caused by the increased heat energy absorbed by the Earth's atmosphere, which is largely the result of human activity and the burning of fossil fuels. Rising ocean temperatures can also contribute to the melting of ice caps, as warmer water can flow beneath them and cause them to melt from the bottom up. Additionally, warmer water can expand in volume, which also contributes to rising sea levels.  Hence option: 3 is correct.

To know more about heat energy, here

brainly.com/question/25384702

#SPJ4

--The complete Question is, How are rising sea levels and rising ocean temperatures connected? (1 point)

When a mass of colder air moves into where warmer air is present, it creates a boundary known as a cold front. This results in the warmer air being lifted upwards, which can lead to the formation of clouds and precipitation.

The development of a cold front is a key aspect of weather patterns and can impact temperature, humidity, and atmospheric pressure. This information can be found on the Wikipedia page for Cold Front under the section titled "Development of Cold Fronts".

When a mass of colder air moves into an area where warmer air is present, a cold front develops. The colder air, being denser, slides under the warmer air and lifts it. This process often results in the formation of clouds and precipitation as the warmer air is forced to rise, cool, and condense. The movement of the cold front can also cause a noticeable drop in temperature and changes in wind direction.

To know more about Mass click here .

brainly.com/question/19694949

#SPJ11

compressed or shredded Large items that are not recyclable should be compressed or shredded before being disposed of in a landfill.

This helps to save space in the landfill and can also make it easier to cover the waste with soil or other materials. Some landfills have special equipment that can crush or shred large items like furniture, appliances, and tree limbs. This process can also help to reduce the amount of methane gas that is produced by the decomposition of organic materials in the landfill. Large items that are not recyclable should be compressed or shredded.

Learn more about decomposition here:

https://brainly.com/question/8009068

#SPJ11

Grounding and bonding conductors are not considered current carrying. True. Grounding and bonding are essential for electrical safety.

Grounding provides a path for fault current to flow back to the source, while bonding connects metal parts that could become energized to ensure they remain at the same potential. Under normal conditions, these conductors do not carry current. However, they are designed to carry fault current in the case of an electrical fault, which helps prevent dangerous voltage levels on surfaces and equipment. In order to assure safety and avoid electrical risks, electrical conductors must adhere to the National Electrical Code (NEC), whether they are carrying current or not.

Learn more about conductors here:

brainly.com/question/30583226

#SPJ11

Arnold Strongman and Suzie Small each pull very hard on opposite ends of a rope in a tug-of-war. the greater force on the rope is exerted by Arnold, of course. Suzie, surprisingly. both the same, interestingly. A pair of toy freight cars, one twice the mass of the other, fly apart when a compressed spring that joins them is released.

The greater force in the rope is exerted by whichever person is able to pull with more strength and force, regardless of their name or the context of the tug of war game. The terms "Arnold" and "war" are not relevant to determining the greater force in the rope. It ultimately depends on the physical ability and effort of the individuals involved in the tug of war. Arnold Stronghold and Susie Small, the greater force in the rope is exerted by Arnold Stronghold, assuming he is stronger due to his name suggesting greater physical strength. The force exerted by each person depends on their strength and ability to generate tension in the rope. Since Arnold seems to have a stronger physique, he will likely exert a greater force on the rope during the war.

learn more about Arnold Stronghold here

https://brainly.com/question/30531922

#SPJ11