Answer:
C
Explanation:
Mostly all of them but most likely C
Based on hydrogen emission, where is star formation occurring?
Based on hydrogen emission, where is star formation occurring are : the left arm and the right arm.
The molecule of the hydrogen gets apart in to the hydrogen atom when the temperature of the core reaches the temperature of about the 2000 degrees of the kelvin. when the core reaches to the temperature of the 10000 degrees of kelvin and it will starts to look like a star when the fusion reaction starts. the fusion reaction occurs when two lighter nuclei will combine to form the heavier one.
Thus, at the left arm and the right arm, Based on hydrogen emission, where is star formation occurring.
To learn more about star formation here
https://brainly.com/question/26964924
#SPJ4
Divide the compounds below into chiral and achiral molecules. 1st attempt See Periodic Table Items (6 images) (Drag and drop into the appropriate area below) Br Br
To solve this, we must need to know each and every concept behind chiral and achiral molecule. Therefore, option B,C are chiral molecule and option A,D are achiral molecule.
What is chirality?Chirality fundamentally means' mirror-image, non-superimposable molecules,' and to state a molecule is chiral is to argue that its mirror image (which it must have) is not the same as itself. A molecule's chirality or achirality is determined by a collection of overlapping requirements.
A chiral molecule is a non-supposable mirror copy of another molecule. The existence of an unbalanced carbon atom is the most common source of chirality in compounds.
Therefore, option B,C are chiral molecule and option A,D are achiral molecule.
To know more about chirality, here:
https://brainly.com/question/28328798
#SPJ4
-Which of the following statements is true regarding the periodic table? If False, justify.
a. The horizontal rows in the periodic table are known as groups
b. The vertical columns in the periodic table are known as periods
c. In the periodic table, when the atomic number increases, the properties of the elements repeat regularly
d. The periodic table is classified into blocks based on the electron filling pattern into shells
In the periodic table, when the atomic number increases, the properties of the elements repeat regularly is the true statement.
The periodic table is a table that groups all chemical elements into groups based on their unique atomic numbers. Periods and groups, respectively, are the terms used to describe the periodic table's horizontal rows and vertical columns. The present periodic chart's inventor, Henry Moseley, claimed that "the properties of elements are periodic functions of their atomic numbers." The elements' properties are characterized by periodic patterns along groups and throughout eras, as seen by the present periodic table. The elements in the periodic table are separated into four groups, or blocks. They are components of the blocks s, p, d, and f. The categorization is based on the naming of the orbitals that take the last electron.
To know more about atomic number visit:
https://brainly.com/question/8834373
#SPJ1
282 Question 2 6 pts Fill in the blanks below for a molecule of N2Br2. (hint: draw the Lewis structure for the molecule and count) number of single bonds - number of double bonds - number of triple bonds number of lone pairs -
The following information is accurately filled in the blanks in the image from the task above regarding N2Br2:
a. There is one single bond,
b. one double bond,
c. There are no triple bonds.
d. There are 16 lone pairings.
What does Lewis Structure mean?
The depiction of the outermost shell electrons in a specific molecule is the simplest definition of Lewis structure. It is impossible to overstate the significance of understanding this Lewis structure because it aids in understanding:
The forms and quantity of chemical bonds in an element's or compound's atom, molecule, or compound
The isolated atom pairs.Voltage electrons.molecular structure.The chemical dinitrogen bromide, which is the subject of the assignment, has just one single bond and one double bond combined.Additionally attached is the entire image of the query as well as a schematic showing the Lewis structure for N2Br2: As a result, we can now affirm from the aforementioned explanation that the Lewis structure provides more information regarding the description of atoms or molecules.
Learn more about Lewis structure Visit: brainly.com/question/11554350
#SPJ4
Correct Question:
Fill in the blanks below for a molecule of N2Br2. (hint: draw the Lewis structure for the molecule and count) number of single bonds - number of double bonds - number of triple bonds number of lone pairs -
Draw a Lewis structure for C4H4
Lewis structure for C4H4 is given below.
Lewis' structure name was given after Gilbert N. Lewis. He introduced in his article “the atom and the molecule” in 1916. Diagrams of Lewis structure shows the bonding between atoms on the molecule and also shows ion pairs of electrons if any.
A step-by-step process to draw Lewis' structure is:
Count how many valence electrons and where it is,Draw on the molecule the skeleton structure,Valence electrons are used to form bonds in the skeleton structure,Distributing the remaining valence electrons as nonbonding electrons, if any.Know more about Lewis’ structure here: https://brainly.com/question/20300458
#SPJ4
Choose from the conversion factors given to complete the following diagram of amount-mass-number relationships for a compound molar mass (g/mol) of substance MASS (9) of substance Avogadro's number (entities/mole) MASS (9) of one element in substance molar mass (g/mol) of substance molar ratio from balanced equation density (g/mL) of substance molar mass (g/mol) of substance AMOUNT (mol) of one element in substance AMOUNT (mol) of substance atomic mass (g/mol) of element Avogadro's number (entities/mole) chemical formula of substance Avogadro's number (entities/mole) ATOMS of one element in substance ENTITIES of substance molar ratio from balanced equation Reset
The conversion factors given to complete the diagram of amount-mass-number relationships for a compound are
MASS (g) of substance ⇒ molar mass (g/mol) substance ⇒ AMOUNT (mol) of substance ⇒ Avogadro's number (entities/mole) ⇒ ENTITIES of substance
MASS (g) of one element in substance ⇒ molar mass (g/mol) subtance ⇒ AMOUNT (mol) of one element in substance ⇒ Avogadro's number (entities/mole) ⇒ ATOMS of one element in substance
AMOUNT (mol) of substance ⇒ molar ratio from balanced equation ⇒ AMOUNT (mol) of one element in substance
What is a conversion factor in chemistry?А conversion fаctor is а number used to chаnge one set of units to аnother, by multiplying or dividing. When а conversion is necessаry, the аppropriаte conversion fаctor to аn equаl vаlue must be used. For exаmple, to convert inches to feet, the аppropriаte conversion vаlue is 12 inches equаl 1 foot. To convert minutes to hours, the аppropriаte conversion vаlue is 60 minutes equаl 1 hour.
Your question is incomplete, but mot probably yur full question can see in the Attachment.
For more information about conversion factor refer to the link:
https://brainly.com/question/30166433
#SPJ4
When did pewter stop having lead?
The best way to test for lead in pewter is using a lead test kit from the hardware store. This involves swabbing an area of metal with test chemicals and looking for a color change. For most kits, pink or red indicate lead. .
Lead content in antique pewter?30 percent lead and 70 percent tin were the main components of ancient pewter. When exposed to acidic foods, this type of pewter, often known as black metal, quickly leached away its lead.
What caused the removal of lead from pewter?It's vital to remember that early pewter contained a lot of lead. Due to the deadly nature of lead, daily or regular use caused the chemical to leak out of the plate, spoon, or tankard and swiftly enter the body.
To know more about pewter visit:-
https://brainly.com/question/29548863
#SPJ4
propose an efficient synthesis for the following transformation
Answer:
Without more information about the specific transformation in question, it is not possible to propose an efficient synthesis for it. In general, the development of an efficient synthesis for a particular transformation involves a combination of scientific knowledge, chemical expertise, and creative problem-solving. The specific steps involved in an efficient synthesis will depend on the particular starting materials, the desired products, and the conditions under which the transformation takes place. Some common strategies for developing efficient syntheses include optimizing reaction conditions, using catalysts to accelerate reactions, and finding alternative reactions that produce the desired products more efficiently
Complete the following acid-base reaction. You do not have to consider stereo chemistry. You do not have to explicitly draw H atoms. You should include all products. If the reaction is a Lewis acid-base reaction, draw the products in a single sketcher. with a single bond connecting the Lewis base and Lewis acid. If the reaction is a Bronsted acid-base reaction, draw the products in separate sketchers. Separate multiple products using the + sign from the dropdown menu.
The acid-base reaction is Lewis acid-base reaction with [tex]BF_3[/tex] as Lewis acid and cyclohexanol as Lewis base.
How to write acid-base reaction?First, we must determine if this reaction is Lewis acid-base or Bronsted acid-base.
The given reaction is can be considered as Lewis acid-base. Then we must find the Lewis base and Lewis acid. Lewis base is an electron donor and Lewis acid is an electron acceptor. So from the given reaction, we can determine the [tex]BF_3[/tex] is Lewis acid because it is an electron acceptor and cyclohexanol is Lewis base because it is an electron donor.
The complete reaction is in the attached image.
Your question is incomplete, but most probably your full question was
(image attached)
Learn more about acid-base here:
brainly.com/question/25280500
#SPJ4
How do you measure a scope 2?
To measure scope 2 emissions, an organization first needs to gather data on the types and quantities of energy it consumes, such as electricity, natural gas, and fuel oil.
Scope 2 emissions are greenhouse gas (GHG) emissions that result from the generation of electricity, heat, or steam that an organization consumes. These emissions are often referred to as "indirect emissions" because they are not directly emitted by the organization itself, but rather by the source of the energy that the organization consumes.
The organization can then use GHG emissions factors, which are data on the average emissions intensity of different energy sources, to calculate the emissions associated with its energy consumption.
For example, if an organization consumes 100,000 kilowatt-hours (kWh) of electricity from a coal-fired power plant, it can use the GHG emissions factor for coal-fired electricity to calculate the associated scope 2 emissions. The GHG emissions factor for coal-fired electricity might be 0.9 metric tons of CO2e per MWh, so the scope 2 emissions for the organization in this example would be 90 metric tons of CO2e (100,000 kWh x 0.9 metric tons CO2e/MWh).
To know more about greenhouse
https://brainly.com/question/13706708
#SPJ4
What is an enzyme describe the steps of catalysis cycle of an enzyme action?
There are a lot of different enzyme that catalyzes different reactions. The steps of catalysis cycle of an enzyme action are
Substrate binds to the active site of the enzymebinding alter the Shape of enzymeformation of substrate complex repeation of reaction.An enzyme is act as a biological catalyst. It is a biochemical substance that aids in accelerating and improving the efficiency of bodily reactions. Our body's ability to function depends on enzymes.
The following steps can be used to describe an enzyme's catalytic cycle:
1. Firstly, the substrate binds to the active site of the enzyme, fitting into the active site for binding.
2. The binding of the substrate with the enzyme must be changes its shape, fitting more tightly around the substrate.
3. The newly formed enzyme-product complex is created when the active site of the enzyme, which is now near the substrate, breaks the chemical bonds of the substrate.
4. As soon as the enzyme releases the reaction's byproducts, it is free and prepared to bind to a fresh substrate molecule and repeat the catalytic cycle.
To learn more about Enzyme, refer:
https://brainly.com/question/14577353
#SPJ4
At th williams field the summers are short
Williams Field experiences short, chilly summers, lengthy, chilly, snowy, windy winters, with seasonal partial cloudiness. The average annual temperature ranges from -20°F to 32°F, with uncommon excursions below -32°F or as high as 37°F.
Climatic Conditions at the Williams Field
From November 23 to February 7 is the warm season, which lasts 2.5 months and has an average daily high temperature of more than 24°F. Williams Field experiences its warmest weather in January, with an average high temperature of 31°F and low temperature of 23°F.
The average daily high temperature during the 5.3-month cold season, which runs from April 19 to September 28, is below -2°F. With an average low of -20°F and a high of -10°F, August is the coldest month of the year at Williams Field.
To learn more about Climatic Conditions
https://brainly.com/question/29332636
#SPJ1
Which type of scientific statement describes a proven fact about how things function in nature?.
The type of scientific statement that describes a proven fact about how things function in nature is known as: laws.
What are the types of scientific statements?Scientific statement is the type of statement that is potentially testable and backed up by some scientific methods (or proof). There are at least three types of scientific statements, which are as follows:
Hypothesis is a testable statement regarding the relationship between two or more variables for some observed phenomenon.Theories are the thought-out explanation that brings many facts and hypotheses regarding observations of the natural world.Laws are scientific statements that describe or predict a proven fact in nature.Hence, the correct answer is law.
This question seems incomplete. The complete query is as follows:
“Which type of scientific statement describes a proven fact about how things function in nature?
HypothesisTheoriesLawsLearn more about scientific statements here https://brainly.com/question/19894291
#SPJ4
When certain amount of sucrose is dissolved in 1 kg of water what is the freezing point?
The freezing point of a solution of sucrose in water changes depending on the amount of sucrose in the solution.
What is solution?Solution is a way to solve a problem, issue, or challenge. It is often a combination of action steps, processes, tools, or strategies that are used to address a particular issue or challenge. Solutions may be devised through brainstorming, research, or other means. Solutions can range from simple to complex, and can be tailored to the individual situation or context. Ultimately, the goal of a solution is to provide a successful outcome that resolves the issue or challenge.
Generally, the freezing point of a 1 M (molar) solution of sucrose in water is -1.86°C.
To learn more about solution
https://brainly.com/question/25326161
#SPJ4
what is the ka of the 2−hydroxyethylammonium ion, hoch2ch2nh3+? (pkb of hoch2ch2nh2 = 4.49)
The ka of the 2−hydroxyethylammonium ion is 3.09 * 10^-10.
We know that 2-hydroxyethylamine is a weak base that generates a conjugate acid, 2-hydroxyethylammonium ion.
[tex]HOC_{2} H_{4}NH_{2}+ H_{2}O = HOC_{2}H_{4}NH^{+}_3 + OH^{-} \\[/tex]
The pK_{b} of HOC_{2} H_{4}NH_{2} is given.
K_{b} can be solved pK_{b}.
[tex]pK_{b} = -log(x_{b}) \\K_{b} = 10^{pKb}\\ = 10^{4.49} \\K_{b} = 3.24 * 10^{-5}[/tex]
To solve of K_{a} of the reverse reaction where 2-hydroxyethylamonium ion is present, we should use this relationship
[tex]K_{w} = K_{b} * K_{a}\\K_{a} = \frac{K_{w}}{K_{b}}\\ = \frac{1.0 * 10^{-14}}{3.24 * 10^{5}} \\ K_{a} = 3.09 * 10^{-10}[/tex]
So, the ka of the 2−hydroxyethylammonium ion is 3.09 * 10^-10.
To know more about the ion, here
https://brainly.com/question/29183072
#SPJ4
in each reaction box (3 boxes total), place the best reagent or reactant from the list below
The correct reagent for the given question are as follows:
1) AlCl₃ - CH₃Cl
2) HNO₃ -H₂SO₄ at room temperature
3) Fuming HNO₃ -H₂SO₄ at temperature 90-100 ⁰ C.
In 1st step Benzene is being converted to Toluene .
Benzene is being converted to toluene by the method of Friedel Craft Alkylation of benzene . In this reaction AlCl₃ and CH₃Cl is used as reagent. Electrophile CH³⁺ is produced which is attached on carbon of benzene and the formation of Toluene and HCl occur.
In 2nd step Benzene is being converted to Dinitritoluene .
Dinitritoluene is being prepared from toluene by Nitration. This reaction proceeds by the mechanism of Electrophilic substitution mechanism . HNO₃ and H₂SO₄ are the reagents that are used for the proceeding of reaction at room temperature. These reagents produces NO₂⁺ ( nitronium ion ), which is an electrophile which attacks on C₂ and C₄ Carbon atoms of Toluene.
In 3rd step Benzene is being converted to 2,4,6- trinitrotoluene.
This reaction is the result of extended nitration of the toluene . Further nitration is only can be done in extreme condition . The reaction occurs in the temperature of 90- 100 ⁰ C . Due to rise in temperature there is more production of NO²⁺ ion occurs from HNO₃ - H₂SO₄ and they attack on C6 carbon atom of dinitrotoluene which forms 2,4,6- trinitrotoluene.
Learn more about benzene from the link given below.
https://brainly.com/question/14525517
#SPJ4
chlorine pentafluoride gas is collected at in an evacuated flask with a measured volume of . when all the gas has been collected, the pressure in the flask is measured to be . calculate the mass and number of moles of chlorine pentafluoride gas that were collected. be sure your answer has the correct number of significant digits.
ClF5 has a mole concentration of 0.300 moles, or 39.1 grams.
Step 1: Data givenChlorine pentafluoride gas's starting temperature is -17.0 °C (256 K).
The gas's initial volume is 35.0 L.
The measurement's pressure is 0.180 atm.
Chlorine pentafluoride has a mol mass of 130.445 g/mol.
Step 2: Calculate moles of Chlorine pentafluoridep*V= n*R*T
n = (p*V) / (R*T)
n = the quantity of moles. To Be Determined Chlorine Pentafluoride
with p = the pressure of the gas = 0.180 atm
with V = the volume of the gas = 35.0 L
with R = the gas constant = 0.08206 L* atm/mol*K
with T = the temperature = -17 °C = 256 K
n = (0.180 * 35.0)/ (0.08206*256)
n = 0.300 moles
Step 3: Calculate mass of ClF5Mass ClF5 = moles ClF5 * molar mass ClF5
Mass ClF5 = 0.300 moles * 130.445 g/mol
Mass ClF5 = 39.1 grams
To know more about chlorine pentafluoride visit:-
https://brainly.com/question/20714737
#SPJ4
In an ionic or covalent substance, electrons are shared or transferred between no more than two atoms at a time. however, in a metallic substance, electrons are shared among all of the metal atoms in the sample. how does this explain why metals are more malleable and ductile than ionic and covalent compounds?
Metals are more malleable and ductile than ionic and covalent substances because the electrons in them are shared among all of the metal atoms in the sample as a "sea of electrons" that surrounds the metal ions.
It is assumed that this electron sea around the metal atoms is the main reason of the great conductivity, malleability, and ductility that make metals unique.
The electron sea in a metallic body allows metal ions to readily travel past one another and twist the metal without breaking it. However, because of the strong chemical connections that keep ionic and covalent molecules together, it is more difficult to change them without rupturing the bonds. Ionic and covalent compounds are therefore less malleable and ductile than metals.
To know more about ductility of metals click on below link:
brainly.com/question/887163#
#SPJ4
RM href Module01/modul Anatomy & Physiology Module 1: The Human Body & the Chemistry of Life identify the type of structure illustrated Carbon atom Nitrogen ion Sodium ion Hydrogen atom Submit ?AGE gedis Mentor Leaning Activities
The type of structure illustrated in the question is hydrogen atom.
An atom of the chemical element hydrogen is known as a hydrogen atom. The Coulomb force holds a single positively charged proton and a single negatively charged electron to the nucleus of the electrically neutral atom.
Atoms are the fundamental building units of all stuff. Protons, electrons, and neutrons are even smaller particles that make up atoms. In terms of mass, protons and neutrons, which reside in the atom's nucleus, are nearly similar. Neutrons have no charge, whereas protons have a positive charge. Electrons are far less heavy than the other particles, have a negative charge, and orbit the nucleus in shells or electron orbitals.
Your question is incomplete but most probably your full question attached below
Learn more about atom at https://brainly.com/question/1566330
#SPJ4
TMS 40 20 PPM 180 60 140 60 140 12010080 160 FIG. 48.8 The IR spectrum of cis-norbornene- 5,6-endo-dicarboxylic anhydride. Microns (um) 5.0 6.0 8 10 15 20 2.5 3.0 3.5 4.0 1838 cm 1759 cm-1 4000 3500 3000 2500 2000 1500 1000 500 Wavenumber (cm-1)
There are two peaks for anhydride at the above freq. our peaks are at 1759 cm-1 and one at 1838 cm-1 between two carbony1 group increases the freq. while resonance lowers the frequency.
peak at 1100cm-1 C-O
PEAK at 1600 CM-1 alkene
2850 CM-1-3000 CM-1 ALKANE STRETCH.
3150 CM-1 ALKANE STRETCH
While cracking the dimer it will give us monomer which then reacts with maleic anhydride to give Diels-Alder product. It does not give any unwanted product at higher temperature. If monomer reaction was low temperature and cracked.
Breaking the dimer at high temperature and it is to be reacted immediately can isolate the pure product.
To learn more about IR spectrum
https://brainly.com/question/29754365
#SPJ4
What are the 5 characteristics of compounds?
Compounds can only be broken down chemically, have a fixed ratio of elements, and have a certain set of attributes.Compound particles are homogeneous, or identical, and solely of one kind.
What is it compounds and what qualities do they have?A compound is a substance made up of two or more distinct types or elements together in a specific proportion of their atoms.
The following four facts concerning compounds.?When elements combine to form compounds, powerful forces known as chemical bonds hold the components together.Chemical formulae for compounds are used to identify the elements from of the periodic table that make up each one.Because elements can rarely found on their pure form, compounds are relatively prevalent.
To know more about compound visit:
https://brainly.com/question/13516179
#SPJ4
What is sp3 orbital?
sp3 orbital is one of a set of hybrid orbitals produced when one s orbital and three p orbitals are combined mathematically to form four new equivalent orbitals oriented toward the corners of a regular tetrahedron. + + + merge to form.
What is sp3 Hybridization ?The sp3 hybrid orbital has uneven lobes and resembles a "distorted" p orbital. The four sp3 hybrids point in the direction of a tetrahedron's four corners. If you'd like, you can watch an animation illustrating the hybridization of the C orbitals.
The process of combining the characteristics of one 2s orbital and three 2p orbitals to produce four hybrid orbitals with similar properties is known as "sp3 hybridization." An atom needs three p orbitals and a s orbital in order to be sp3 hybridised.
Learn more about sp3 Hybridization here:
https://brainly.com/question/30080445
#SPJ4
A molecule of atp contains adenine, ribose, and three phosphate groups. The bond between the last two phosphates is easily broken, resulting in a molecule of adp and one phosphate group. If the bond between the second and third phosphate groups were more stable, what would be the most likely consequence? the bond between the first and second phosphates would have to be broken to produce energy. More energy would be required to break the bond, so the net energy produced would be less. Once the bond between the phosphate groups is broken the net energy released would increase. The reaction that breaks the bond would begin to take place at a higher temperature.
The most likely consequence of a molecule of ATP contains adenine, ribose, and three phosphate groups. The bond between the last two phosphates is easily broken, resulting in a molecule of ADP and one phosphate group. If the bond between the second and third phosphate groups were more stable is more energy would be required to break the bond, so the net energy produced would be less. The correct answer is B.
More energy would be needed to break the link between the second and third phosphate groups since it is more stable. Because some of the energy is used to break the stronger bond between the second and third phosphate groups, the overall amount of energy produced would be lower.
With the release of energy and inorganic phosphate, ADP (adenosine diphosphate) is easily converted to AMP (adenosine monophosphate) in cells.
ADP ⇒ AMP + Pi + energy
Learn more about ATP at https://brainly.com/question/20032148
#SPJ4
what energy change accompanies this electron movement? a. the atom absorbs four photons of light. b. the atom absorbs one photon of light. c. the atom emits four photons of light. d. the atom emits one photon of light.
One photon of light energy is changed within the atom as a result of this electron migration.
Is atomic mobility the source of electrical energy?Electron mobility is the source of electrical energy. Everything is composed of little units known as atoms. Even smaller particles known as electrons, protons, and neutrons make up atoms. Some of the electrons can move by exerting force.
What kind of energy does an atom's nucleus contain?Nuclear energy is the term used to describe the energy present in the nucleus, or core, of an atom. Electricity can be produced using nuclear energy, but it first needs to be released from the atom.
To know more about electron migration visit:-
https://brainly.com/question/12165624
#SPJ4
if the solvent traveled 6.29 cm and the spot traveled 3.15 cm, what is the retention factor for this spot?
Rf = Distance travelled by the substance from reference line (cm)/Distance travelled by the solvent front from reference line (cm) , the retention factor for this spot is 6.29/3.15 =1.9968.
How do I determine the HPLC retention factor?The distribution constant is multiplied by the column's volume for stationary phase to determine the retention factor, which is then divided by the column's volume of mobile phase.
What does RF stand for?A ratio of the compound's travel distance to the solvent's travel distance is known as the Rf value.An Value of r will be low is if solvent only travels a modest distance.
To know more about retention factor visit:
https://brainly.com/question/13533524
#SPJ4
A given enzyme works on
a. inhibitors.
b. one type of substrate.
c. one of two possible substrates.
d. no substrate.
e. any number of different substrates.
Reason: Enzymes have specific binding to one specific substrate. For example, the enzyme sucrase only binds to the substrate sucrose.
According to the research, the correct answer is Option b. A given enzyme works on one type of substrate.
What is an enzyme?It is a macromolecular substance, natural or synthetic, composed mainly of protein, which catalyzes one or more biochemical reactions in a more or less specific way.
In this sense, they act on one type of substrate, modifying its chemical properties through reactions with their own layer of amino acids, allowing the development of various cellular processes.
Therefore, we can conclude that according to the research, enzymes are characterized by helping to speed up the process of a non-catalyzed reaction and works on one type of substrate.
Learn more about enzymes here: https://brainly.com/question/11370054
#SPJ1
A sample of calcium carbonate is cooled. Which change happens to the molecules of calcium carbonate in the sample?.
The change that happens to a sample of calcium carbonate as it cooled is: C. The forces strengthen, and the molecule structure becomes more rigid.
What happens to molecule forces when a compound cooled down?When a compound cooled down, the speed of the molecules decreases. It causes the reduction of the kinetic energy and allows the attraction between molecules to bring them closer to each other. As this process happens, the forces strengthen and cause the molecule structure to become more rigid. Hence, the correct answer is C.
This question is incomplete. The complete query is as follows:
“A sample of calcium carbonate is cooled. Which change happens to the molecules of calcium carbonate in the sample?
A. The forces weaken, and the molecules move around.B. The molecules break apart and then form stronger forces.C. The forces strengthen, and the molecule structure becomes more rigid.D. The molecules vibrate more and weaken the forces.”Learn more about intermolecular forces here https://brainly.com/question/30029952
#SPJ4
Answer: Answer is C
Explanation:
Draw the Lewis structure for methylamine CH5N. Methylamine molecules have one amino group. Be certain you include any lone pairs.
The Valence shell electronic configuration of C,N and H are He2s²2P², He2S²2P³ and 1S² respectively.
Valence measures how many electrons an atom must receive or lose to reach the Valence shell electronic configuration of the nearby noble gas or inert gas. Valence electrons are the empty electrons in the outer shells of atoms.
Due to their higher energy content compared to electrons in inner orbits, valence electrons participate in chemical processes. The amount of valence electrons in an element also influences its chemical characteristics, including its valence or valency and the ability to form bonds with other elements. It also reveals the quantity of unpaired electrons, the number of atoms that can participate, and how easily bonds can form between atoms.
Learn more about Valence shell electronic configuration here:
https://brainly.com/question/13836846
#SPJ4
which metal has highest melting point
Answer:
The metal with the highest melting point is tungsten, which has a melting point of about 3,410 degrees Celsius (6,170 degrees Fahrenheit). Tungsten is known for its high melting point and excellent resistance to wear and corrosion, which makes it a useful material in many industrial applications.
Other metals with high melting points include osmium (3,060 degrees Celsius), rhenium (3,180 degrees Celsius), and tantalum (2,996 degrees Celsius). These metals are also known for their excellent resistance to wear and corrosion, and are used in a variety of industrial and technical applications.
It is worth noting that the melting point of a metal can depend on the purity and crystalline structure of the sample, and can vary slightly from one sample to another. However, tungsten is generally considered to have the highest melting point of any pure metal.
How do you tell if a compound is ionic polar covalent or nonpolar covalent?
A compound is considered to have a polar covalent nature if one part of it is partially positive while the other is partially negative .
A compound called nonpolar covalent in nature if an atoms share an equal number of electrons.
Thus in a polar covalent compound there is difference in the electronegativity whereas there is no such difference in the case of nonpolar covalent compounds.
There is formation of positive and negative ions in the polar covalent compounds known as anions and cations , there is no such ion formation in case of nonpolar covalent compounds.
These are certain differences using which we can identify if a compound is ionic polar covalent or nonpolar covalent.
To learn more about compounds
brainly.com/question/14470991
#SPJ4