Answer:
Explanation:
He’s wright SS7G5 The student will locate selected features in
Southwestern Asia (Middle East).
a. Locate on a world and regional political-physical map:
Euphrates River, Jordan River, Tigris River, Suez Canal,
Persian Gulf, Strait of Hormuz, Arabian Sea, Red Sea, and
Gaza Strip.
b. Locate on a world and regional political-physical map the
nations of Afghanistan, Iran, Iraq, Israel, Saudi Arabia, and
Turkey
How do you increase the size of the paging file on your windows system?
The way to increase the size of the paging file on your windows system is by:
To use Sysdm, go to Start > Run and enter it.On the Advanced tab, click.Click Change in the Virtual Memory section.If required, uncheck the box that says "Automatically manage page file size for all disks."Choose the drive that houses your paging file from the list of drives by finding it.Choosing Custom SizeWhat is a good paging file size?To maintain system stability, your paging file size should ideally be at least 1.5 times your physical memory and no less than 4 times the physical memory.
The ways to make a paging file in Windows 11 bigger are:
Remove the check mark next to "Automatically manage paging files size for all disks."Choose Custom size from the menu.Set the paging file's starting and maximum sizes in megabytes.Select Set from the menu.Therefore, Your hard disk will have to do more work as a result of having a larger page file, slowing down all other operations. Increases in page file size should only be made as a temporary workaround when encountering out-of-memory issues. Increasing the computer's memory is a better approach.
Learn more about paging file from
https://brainly.com/question/28305794
#SPJ1
When you dereference an object pointer, use the
a. dot operator
b. -> operator
c. None of these
d. <>operator
e. & operator
When you dereference an object pointer, use the -> operator.
What is pointer?
A pointer is a variable in a computer program that stores the address of another variable. This allows the program to access the data stored in the other variable without having to know the exact address of the data. Pointers are an important concept in programming, as they allow for efficient use of memory and more complex data structures. Pointers can simplify tasks such as looping, searching, and sorting. They can also make it easier to debug programs, as the address of a variable can be tracked through the pointer. Pointers can also be used to implement dynamic memory allocation, which can be used to create more efficient programs. Pointers are often used in C and C++ programming languages, but have been adapted for use in other languages as well.
To learn more about pointer
https://brainly.com/question/28485562
#SPJ1
Please help! I need this now!!
I own a SanDisk flash drive, and I want to download pictures on it so I can plug into my tv and use them for art references, but when I put the flash drive into my tv, and when I clicked on an image, it say that, "the files are unsupported."
Any idea what that means, and how I can fix it?
Thanks!
Answer: Try opening it with another app on the TV, but if that does not work try connecting a USB flash drive to the USB connector that is built into Smart TV. It can be located on the back, side, or front panel. Find a suitable connector on your TV, install the USB stick into the connector, take the TV remote control, and select the desired folder in the file system.
Try using a different USB drive, format the current Flash drive with the right format (such as FAT32) then paste, or save the supported file again. If other files do not play, perform a reset.
Make sure that the USB drive is fully inserted into the USB input of the player.
Make sure that the file being used is one of the supported file types. A list of the supported file types is available in the operations guide.
Attempt to play a different file.
If other files play, there may be an issue with the file itself. Try removing the file from the USB drive and saving a new copy.
IMPORTANT: If the file being used is corrupted or was recorded using an unsupported codec, the player will not be able to play the file.
Try using a different USB drive, format the current Flash drive with the right format (such as FAT32) then paste, or save the supported file again.
If other files do not play, perform a reset.
Using the supplied remote control, press the Home or Menu button.
Select Resetting.
Select OK to reset the player back to factory settings.
Hope it helps! Type me feedback in the comments, so I know if it is not correct.
Use the drop-down menus to complete these sentences.
The running of a set of programming instructions multiple times is called
.
If a sequence of code is repeated multiple times, it is referred to as
.
One set of coding instructions processing many different sets of data and eliminating multiple lines of code is an example of
Answer:
The running of a set of programming instructions multiple times is called iteration.
If a sequence of code is repeated multiple times, it is referred to as a loop.
One set of coding instructions processing many different sets of data and eliminating multiple lines of code is an example of Iteration value.
Explanation:
Answers are correct. I got them right.
The running of a set of programming instructions multiple times is called iteration, If a sequence of code is repeated multiple times, it is referred to as loop, One set of coding instructions processing many different sets of data and eliminating multiple lines of code is an example of value of iteration.
What is Iteration?Iteration refers to repeating a certain number of steps continuously until a particular condition is met successfully.
The iterations can be an infinite number of times or an infinite number of times. It all depends on the program in which we are performing the iterations.
Iteration is the repetition of a process in a computer program, usually done with the help of loops.
When the first set of instructions is executed again, it is called an iteration. When a sequence of instructions is executed in a repeated manner, it is called a loop.
Therefore, The running of a set of programming instructions multiple times is called iteration, If a sequence of code is repeated multiple times, it is referred to as loop, One set of coding instructions processing many different sets of data and eliminating multiple lines of code is an example of value of iteration
Learn more about Iteration, here:
https://brainly.com/question/14969794
#SPJ3
31) Listed below are four general means of authenticating a user's identity, which can be used alone or in combination, provide two examples of each mean. a) Something the individual knows b) Something the individual possesses: c) Something the individual is (static biometrics): d) Something the individual does (dynamic biometrics): 20 points 32) Explain the following attacks and provide the countermeasure for each on of then: a) Specific Account Attack The standard countermeasure b) Workstation Hijacking The standard countermeasure C)Password Guessing Against single user The standard countermeasure
Answer:
31) Examples of the means of authenticating a user's identity that can be used alone or in combination are;
a) Something the individual knows;
The Personal Identification Number (PIN)
The password to an account
Answer to a (complete) set of questions
b) Something the individual possesses
An ATM card
A SIM card
Other examples includes;
Physical keys to a lock
Smart cards
Electronic Key-Card used for physical entrance into an apartment
c) Something the individual is (Static biometrics)
The fingerprint
Face recognition
Retina recognition
d) Something the individual does (dynamic biometrics);
Recognition of typing rhythm
Characteristics of the users handwriting
Voice pattern recognition
32) a) Specific account attack
A specific account is targeted for the attack by the attacker attempting to gain access by submitting guesses of the account password with the aim of finding the correct password
Countermeasure;
Limiting the number of password guesses
The use of strong passwords having over 8 characters that includes special characters
Use of multi-factor authentication
b) Workstation Hijacking
The attacker takes advantage of an logged-in unattended workstation
Countermeasure;
The use of automatic lock functions that use time of inactivity on a system or the absence of a paired device
c) Password Guessing
Password guessing is the technique used while online in an attempt to prove to being the authentic particular user by means of trial and error of a user password
Countermeasure;
The use of a two or more of authentication method also known as a multi-factor authentication MFA
Explanation:
Difference between Hollerith and Burroughs machine
Explanation:
The tabulating machine was an electromechanical machine designed to assist in summarizing information stored on punched cards. Invented by Herman Hollerith, the machine was developed to help process data for the 1890 U.S. Census. Later models were widely used for business applications such as accounting and inventory control. It spawned a class of machines, known as unit record equipment, and the data processing industry.
Herman Hollerith (February 29, 1860 – November 17, 1929) was an American businessman, inventor, and statistician who developed an electromechanical tabulating machine for punched cards to assist in summarizing information and, later, in accounting. His invention of the punched card tabulating machine, patented in 1884, marks the beginning of the era of mechanized binary code and semiautomatic data processing systems, and his concept dominated that landscape for nearly a century.
Hollerith founded a company that was amalgamated in 1911 with several other companies to form the Computing-Tabulating-Recording Company. In 1924, the company was renamed "International Business Machines" (IBM) and became one of the largest and most successful companies of the 20th century. Hollerith is regarded as one of the seminal figures in the development of data processing.
The organizational structure of the files and folders on a computer is the _______, a. Start menu b. Menu folder c. File folder d. File directory please select the best answer from the choices provided a b c d.
The organizational structure of the files and folders on a computer is the file directory. therefore the correct option is d.
The directory structure is the association of lines into a scale of flyers. It should be strong and scalable, it shouldn't unnaturally recast, only be subjoined. Computers have utilized the folder conceit for decades as a path to help freaks keep track of where commodities can be set up. We suggest you should use flyers basically for a storehouse, rather than for association.
There must be one top-position organizational construct, which can only be subdivided in a limited way before the system becomes too clumsy and breaks down. Likewise, information that's dependent on a brochure structure is veritably fragile. However, that contented facts can be lost still, flyers give an ideal tool for managing the data itself, If you put off an image from a brochure that designates what that image is.
To learn more about organizational structure,
https://brainly.com/question/1178560
This OS integrated the processing power of Windows NT with the easy-to-use GUI of Windows 98.
Windows Millennium Edition
Windows 2000
Windows for Workgroups
Windows 3.11
The SQL command that lets you select attributes from rows in one or more tables or views is ____.
a. INSERT
b. SELECT
c. COMMIT
d. UPDATE
Answer:
SELECT
Explanation:
Everytime a friend thies. to select something in
Windows, she gets a menue popping up Explain
to her what she is doing whing and why
she
cannot
select the objeto
Answer:
Please write properly your sentence is incomplete
Bernard is creating an inventory of his comic book collection. He has documented the title, publisher name, production year, and
series number for each comic in his collection. He creates a spreadsheet of this information. Typically, each one of these
categories, such as production year, would be contained in:
A: a formula bar.
B: a cell.
C: a row.
D: a column.
Answer:
D: a column.
Explanation:
Since in the question it is mentioned that Bernard wants to develop an inventory. Now he created a spreadsheet of the given information
The categories like production year, publisher name, etc would be contained in a column as it represent the heading under these the year, name of the publisher are written
Therefore the option d is correct
Answer:
D: a columnExplanation:
Typically, each one of these
categories, such as production year, would be contained in a column.
You computer's IP address is 201.18.149.37/28. Which of the following is a valid default gateway for this address?
a. 201.18.149.46
b. 201.18.149.17
c. 201.18.149.32
d. 201.18.149.48
Since you computer's IP address is 201.18.149.37/28. the option that is a valid default gateway for this address is option a. 201.18.149.46
Have all computers been assigned an IP address?IP addresses are essentially the means by which computers on the internet identify one another. Your internet service provider (ISP) assigns IP addresses, each of which is distinct, to your internet-connected devices. Since each and every device connected to the internet has an IP address, there are billions of IP addresses in use.
Therefore, since IP address is assigned, or leased, to an individual by an Internet service provider and is an essential element to accessing the Internet itself. IP addresses reveal the source of data and the destination it should be routed to. IP addresses can either be static or dynamic.
Learn more about IP address from
https://brainly.com/question/14219853
#SPJ1
A system that connects computers throughout the world is a
Answer:
Wide Area Network (WAN)
Explanation:
the Internet is the most basic example of a WAN, connecting all computers together around the world. Because of a WAN's vast reach, it is typically owned and maintained by multiple administrators or the public.
mary is re-configuring her network that currently uses the standard 10mbps of bandwidth using twisted pair cabling. she wants to upgrade to a faster network. which ethernet standard is most likely currently installed?
Workstations connected to a network via Dynamic Host Configuration Protocol (DHCP) will immediately receive TCP/IP addressing information (see IETF draft standard RFC 2131, 2132, and 3397).
What is Dynamic Host Configuration Protocol ?Windows Server 2003's DHCP MMC makes it possible to backup and restore the DHCP database without the use of command-line tools.Two local administrative groups, DHCP Administrators and DHCP Users, are added to the server during the installation of a DHCP server by the installation program. While DHCP Users only have read-only access to the DHCP configuration and scopes, DHCP Administrators are fully in charge of DHCP (but not other components of the server).When your scopes run out of IP addresses or have already done so, DHCP server statistics will notify you with variously colored triangular icons.Workstations connected to a network via Dynamic Host Configuration Protocol (DHCP) will immediately receive TCP/IP addressing information (see IETF draft standard RFC 2131, 2132, and 3397). Network address, subnet mask, gateway, and DNS server address are the settings that DHCP sets most frequently. Time server, domain name, and a host of other choices are among the many that you can configure with DHCP. A fact that is frequently forgotten is that DHCP is not exclusive to Windows networks; there is a similar protocol called Bootstrap Protocol (BOOTP) that performs many of the same functions as DHCP.To Learn more About Dynamic Host Configuration Protocol refer to:
https://brainly.com/question/14234787
#SPJ4
What does a hanging indent look like?
The right and left edges of the paragraph are evenly lined up.
The first line of a paragraph is perfectly lined up with the lines below it.
The first line of a paragraph starts farther to the left than the lines below it.
The first line of a paragraph is indented more to the right than the lines below it.
Answer:
Option C, The first line of a paragraph starts farther to the left than the lines below it.
Explanation:
In a hanging indent (which is opposite of the normal paragraph), the first line of the paragraph is lined up with the left margin while the lines below the first line will indent one-half inch from the left margin.
Hence, option C is correct
18.1 humans have this type of vision; select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a binocular vision b color vision c stereoscopic vision d all of the above
Ophthalmologists interpret binocular vision to entail more than simply seeing with two eyes.
What is meant by binocular vision?In biology, binocular vision refers to a type of vision in which an animal has two eyes that are able to face the same direction in order to perceive a single three-dimensional view of its surroundings.Eagles, wolves, snakes, and people are among examples. Some predatory species, particularly huge ones like sperm whales and killer whales, have their two eyes arranged on opposite sides of their heads.Binoculars are occasionally used by soldiers, sailors, hikers, tourists, and even some opera goers who use "opera glasses," which are small, specialized binoculars. The noun is derived from the adjective binocular, which is Latin for "two by two" and meaning "having two eyes" or "including both eyes."Ophthalmologists consider binocular vision to be more than just using both eyes to see. Our presumption is that utilizing both eyes at once is preferable to using one eye alone.To know more about binocular vision refer to :
https://brainly.com/question/12460291
#SPJ4
a programmer writes 500 lines of computer code in 17 days. must there have been at least 1 day when the programmer wrote 30 or more lines of code? why? ---select--- . if the programmer wrote less than 30 lines of code per day for 17 days, then the maximum number of lines that could be written is . since this number is ---select--- 500, it is ---select--- that the programmer wrote 30 or more lines of code during at least one of the 17 days. need help?
Yes, the programmer must have written 30 or more lines of code on at least one day.
When the programmer wrote 30 or more lines of code? why?Given data
Total Lines of code= 500
Number of days= 17 days
Number of codes written per day= 500/17
Number of codes written per day= 29.4117
If we multiply 29.4117 by 17
=499.9989
=500 approx
Hence there was never a day when the programmer wrote 30 or more linesThe programmer must have written 30 or more lines of code on at least one day. This is due to the fact that an average of 29.4 lines of code per day equals 500 lines of code divided by 17 days. The programmer must have written at least 30 lines of code on one of the days (and potentially more), as it is impossible to have less than one line of code, in order to have 500 lines of code in total after 17 days.To learn more about Number of codes written per day refer to:
https://brainly.com/question/23895584
#SPJ4
This tool lets you insert text anywhere in your document. O Cut О сору O Drag O Paste
Answer:
Drag or paste (im not 100% sure tho)
Explanation:
nadine is the systems administrator for a network with a single subnet. The subnet uses 192.168.1.0 with a mask of 255.255.255.0. The network has 10 servers running Windows Server. Srv1 currently provides both DHCP and DNS services. Nadine wants to increase the fault tolerance for her DHCP servers. She installs a new server, Srv11, and configures it for DHCP. She configures a scope on Srv11 to match the scope on Srv1 and then excludes half of the addresses in the scope on Srv1 and the other half of the addresses on the Srv11. Nadine decides to test her solution and shuts down Srv1. As a test, she forces a workstation to release its IP address and request a new one. She finds that the workstation has the IP address 169.254.0.15 with a mask of 255.255.0.0. What should Nadine do to fix the problem?
Answer:
Authorize Srv11
Explanation:
In order to fix this problem, Nadine should Authorize Srv11. The problem is most likely being caused due to failure of authorization of the server. This would prevent this server from being on the same scope as Srv1 and therefore, it is why the IPaddress being given is different. DHCP is an automatic protocol and would not be able to provide an IP address in the same scope if the server is not Authorized to do so.
What file format would be required a coworker need to edit a layer in a photoshop file 
-png
-psd
-pdf
-jpeg
The typical cellphone screen can accommodate no more than 100 characters.
a. True
b. False
False, An improvement over computer instant messaging is text messaging on a cellphone or personal digital assistant.
Text messaging places an even higher emphasis on conciseness because the average cellphone screen can only hold 160 characters, and the keyboard is much less adaptable. See 5-3: Communications through electronic mail
You can read on-screen text or distinguish colours with the use of colour filters.
There are four settings that may be used to distinguish between colours. To change the filter's intensity after selecting one (apart from Grayscale), pick Intensity:
Red/Green Grayscale Filter (for Protanopia)
Red/Green Filter (for Deuteranopia)
Yellow/Blue Filter (for Tritanopia)
Select the Color Tint option to make the text on your screen easier to read. To make changes, choose Hue or Intensity.
Students who use assistive technology must make a separate request for each hardware or software item. It must be the same technology that has been requested.
Learn more about Messaging here:
https://brainly.com/question/14921620
#SPJ4
- Efficient Teams A coding competition is being organized on the HackerRank platform. The participants need to be grouped into teams where each team has exactly two candidates. There are n candidates, where each candidate has a skill denoted by skill[i]. A total of ( n/2) teams are to be formed, such that the total skill of each team is the same. The efficiency of a team is defined as the product of the skill levels of its two members, i.e., for the-skills [1, 3], the efficiency of the team is 1∗3=3. Find the sum of efficiencies of all teams that can be formed satisfying the criteria. If there is no way to create teams that satisfy the conditions, return −1. Note: It can be shown that the answer is always unique. Example The skills of the candidates are skill =[1,2,3,2]. They can be paired as [[1, 3], [2, 2]]. The sum of skills for each team is the same, l.e., 4. The efficiency is computed as: - Efficiency of [1,3]=1∗3=3 - Efficiency of [2,2]=2∗2=4 Return the sum of efficiencies, 3+4=7. Function Description Complete the function getTotalEfficiency in the editor below. getTotalEfficiency has the followino naramatam. Function Desaription Complete the function getTotalEfificiengy in the editor below. getTotalEfficiency has the following parameter: int skill[n]: the skill of each candidate Returns long int: the sum of the efficiencies Constraints −1≤n≤105 - 1≤ skilli0m 105 - n is even. - It is guaranteed that the answer is unique. Input Format For Custom Testing - Sample Case 0 Sample Input For Custom Testing Sample output 13 Explanation Form teams as [1,5],[4,2]. The sums of each pair are 6 . Returns long int: the sum of the efficiencies Constraints - 1≤n≤105 - 1≤skili[]≤105 - n is even. - It is guaranteed that the answer is unique. Input Format For Custom Testing Vample Case 0 Sample Input For Custom Testing STDIN 45421→ FUNCTION − skill[] size, n skill =[5,4, Sample Output 13 Explanation Form teams as [11,5],[4,2]. The sums of each pair are 6. The efficiency is computed as: - Efficiency of [1,5]=1∗5=5 - Efficiency of [4,2]=4∗2=8 Sample Case 1 # Complete the 'getTotalefficiency' function below. # # The function is expected to return a LONG_INTEGER. # The function accepts INTEGER_ARRAY skill as parameter. # 8 def getTotalefficiency(skill): 19 # Write your code here 21> if __name == '__main__' 20⋅…
Using the knowledge of computational language in python it is possible to write code that Function Description Complete the function getTotalEfficiency in the editor below.
Writting the code:def getEfficiency(li):
s=sum(li)
if s%2:
return -1
sum_half = s//2
skills_dict={}
for i in li:
if skills_dict.get(i):
skills_dict[i]+=1
else:
skills_dict[i]=1
res=0
for i,j in skills_dict.items():
key1 = i
key2 = sum_half - i
if skills_dict.get(key2):
if j == skills_dict[key2]:
res = res + j * (key1*key2)
else:
return -1
else:
return -1
return res//2
n=int(input ())
li=list(map(int,input().split(" ")))
print(getEfficiency(li))
See more about python at brainly.com/question/18502436
#SPJ1
OPSEC planning should focus on:
Routine daily activities to include all unclassified information.
Routine daily activities that only include classified information.
None of the answers apply.
Identifying adversary order of battle information.
Identifying and protecting critical information.
Identifying and protecting critical information.
OPSEC planning should focus on identifying and protecting critical information. The correct option is D.
What is OPSEC planning?OPSEC is an analytical process that identifies Critical Information (CI), threats to that CI, and related vulnerabilities and risks of exploitation to that CI, as well as identifying, developing, and implementing remedies to defend that CI.
Planning must center on identifying and safeguarding vital information. It is rarely financially effective or practicable to deny all information about a friendly operation or activity. OPSEC's ultimate purpose is to improve mission effectiveness.
Therefore, the correct option is D, identifying and protecting critical information.
To learn more about OPSEC planning, refer to the link:
https://brainly.com/question/15937294
#SPJ1
Which of the following are options you can select in the top values list for a query?
a. 25%
b. All
c. 5
The top values list for a query:
a. 25% - This option allows you to select the top 25% of values from the query results.
b. All - This option will select all the values from the query results.
c. 5 - This option allows you to select the top 5 values from the query results.
d. Top - This option allows you to select the top value from the query results.
What is query?
Query is a request for data or information from a database. It is a specific set of instructions that allow a user to extract information from a database. Queries are written in a special language called Structured Query Language (SQL). Queries are used to find out specific information from a database, such as which employees have exceeded their quotas, which orders need to be shipped, or what products are in stock. Queries can also be used to create or modify tables, or to add, delete, or modify data in a database. Queries are often used to build reports and can also be used to automate processes.
To learn more about query
https://brainly.com/question/25266787
#SPJ1
Complete Question.
Which of the following are options you can select in the top values list for a query? with explanation.
a. 25%
b. All
c. 5
d. Top
What are the values for ss and variance for the following sample of n = 3 scores? sample: 1, 4, 7 mean = 4
The values for ss and variance for the following sample of n = 3 scores are 18 , 9 respectively.
Mean: (1+4+7)/3 = 4
Difference between each score and mean:
1-4= -3
4-4 = 0
7-4 = 3
List of squared difference: 9, 0, 9
Sum of squared difference: 9+0+9 = 18
Variance = SS/n-1 = 18/2 = 9
SS, often known as the sum of squares or just SS, stands for the sum of squared deviations from the mean and is a crucial concept in statistics.
Variance. Variance is created by the sum of the squares. The variance is calculated as the first use of the term SS.
Calculating control limits to determine the range of results anticipated when the performance of the laboratory method is steady is a typical use of these statistics.
Learn more about Variance here:
https://brainly.com/question/29897721
#SPJ4
. Which of the following refers to the informal rules for how to behave online? A.
Internet manners (IM)
B.profile
C.user control
D.netiquette
Answer:
D.netiquette
hope it is helpful to you
Answer: D
Explanation:
Hope this answer helps your grade!
Heres a survey
What's your fav food
What do you do for a living
What do you do for fun
Are you a boy or girl
What's your fav color
And last what kind of pet do you have if you dont have a pet then whats ypu fav game to play
food.
I'm a child of God snatching lost souls out of Hell
bake
I go to church
some is to much information to give thx and have a blessed day
Answer:
My favourite food is pizza.
I have food, I drink water and stay neat to live.
I play indoor games, read books and plays social media for fun.
I am a girl.
My favourite colour is black and white.
I have a dog name Freddie and a cat called Jacky. My favourite game is football and badminton
HURRY HURRY
HURRY HURRY
when designing a website whom do you need to consider
a. individuals
b. yourself
c. site owner
d. reviewer
Answer:
reviewer
Explanation: cause they will be the ones using the website
Which of the following gives the memory address of integer variable a?
A. *a;
B. a;
C. &a;
D. address( a );
The memory location of integer variable an is provided by &a;. The type of the variable an is integer, not integer pointer. Therefore, we utilise &a to obtain its address.
Variable and other data are kept in the main memory (sometimes referred to as the memory) while a programme is running. The computer's memory appears to a programme as a set of bytes, each of which has an integer address. For instance, there are bytes with addresses 1, 2, and so on, all the way up to a very big number. A software has the ability to get the byte's current contents at a certain memory location and write a specific value in that byte.
Only 8 bits make up a byte. The majority of the data pieces you employ are bigger than that. For instance, an int value typically has 32 bits, or 4 bytes, of space.
Learn more about Variable here:
https://brainly.com/question/13375207
#SPJ4
A school principal trying to find out if parents will help buy new playground equipment shows digital leadership by
Answer:
I would say either working for money to help or ask your parent to help but you should do chores in return
Explanation:
its nice to help