Phenylalanine is converted to phenyl lactic acid by two consecutive sn2 reactions. if the reactant is (s)-phenylalanine, what will the absolute configuration of phenyl lactic acid be?

The pH after adding 7.06 mL of 0.1000 M HCl is the same as the initial pH: 11.87

The reaction between ammonia and hydrochloric acid is:

[tex]NH3(aq) + HCl(aq) - > NH4Cl(aq)[/tex]

Before any HCl is added, the solution contains only ammonia, so we can use the Kb expression to find the initial concentration of hydroxide ions:

[tex]Kb = [NH4+][OH-]/[NH3][/tex]

Since the initial concentration of[tex]NH4+[/tex] and [tex]OH-[/tex] is zero, we have:

[tex]Kb = [OH-]²/[NH3][/tex]

[tex][OH-][/tex] = √(Kb[[tex]NH3[/tex]]) =  √((1.8x10⁻⁵)(0.1000)) = 1.34x10⁻³ M

So the initial pH is:

pH = 14 - pOH = 14 - (-log[OH-]) = 11.87

After adding 7.06 ml of 0.1000 M HCl, the moles of HCl added is:

(0.1000 mol/L)(0.00706 L) = 7.06x10^-4 mol

The moles of [tex]NH3[/tex] initially present is:

(0.1000 mol/L)(0.02000 L) = 2.00x10⁻³  mol

The moles of [tex]NH3[/tex] remaining after the addition of HCl is:

2.00x10⁻³  mol - 7.06x10⁻⁴ mol = 1.29x10⁻³  mol

The volume of the solution is now 20.00 mL + 7.06 mL = 27.06 mL = 0.02706 L

The concentration of NH3 after the addition of HCl is:

[[tex]NH3[/tex]] = 1.29x10⁻³ mol/0.02706 L = 0.0476 M

The concentration of [tex]NH4+[/tex] is also 0.0476 M, since they are produced in a 1:1 ratio.

The reaction between [tex]NH3[/tex] and HCl is a strong acid-base reaction, so we can assume that all of the HCl is converted to [tex]H3O+[/tex].

The concentration of [tex]H3O+[/tex] is:

[[tex]H3O+[/tex]] = (7.06x10⁻⁴ mol)/(0.02706 L) = 0.0261 M

The equation for the ionization of [tex]NH4+[/tex] is:

[tex]NH4+ + H2O - > H3O+ + NH3[/tex]

The equilibrium constant for this reaction is:

[tex]Ka = [H3O+][NH3]/[NH4+][/tex]

Since the initial concentration of [tex]NH4+[/tex] is equal to the concentration of [tex]NH3[/tex] after the addition of HCl, we can substitute [[tex]NH4+[/tex]] = 0.0476 M into the equation above, and solve for [[tex]NH3[/tex]]:

[tex]Ka = [H3O+][NH3]/0.0476[/tex]

[[tex]NH3[/tex]] = (Ka)(0.0476)/[[tex]H3O+[/tex]] = (1.8x10⁻⁵ )(0.0476)/0.0261 = 3.28x10⁻⁵  M

The total concentration of [tex]NH3[/tex] is:

[[tex]NH3[/tex]]total = [[tex]NH3[/tex]] before addition + [[tex]NH3[/tex]] produced from [tex]NH4+[/tex] ionization

[[tex]NH3[/tex]]total = 0.1000 M + 3.28x10⁻⁵ M = 0.1000 M (to three significant figures)

Therefore, the pH after adding 7.06 mL of 0.1000 M HCl is the same as the initial pH:

pH = 11.87

Learn more about initial pH

brainly.com/question/30140546

#SPJ11

1. When 1-pentyne reacts with H2SO4, H2O, HgSO4, the product is 2-pentanone, an enol that tautomerizes to a ketone.

2. When 1-pentyne reacts with one equivalent of HCl, the product is 1-chloro-1-pentene, formed via Markovnikov addition. 3. When 1-pentyne reacts with two equivalents of Br2 in CCl4, the product is 1,1,2,2-tetrabromopentane, where Br2 adds across the triple bond twice.

4. When 1-pentyne reacts with NaNH2 in NH3 followed by MeI, the product is 1-pentyl methyl ether, an S_N2 reaction where the terminal alkyne is converted into an alkoxide and then substituted by MeI.
5. When 1-pentyne reacts with H2, Pt, the product is pentane, where the triple bond is reduced to a single bond via hydrogenation.

To know more about methyl click here

brainly.com/question/30614192

#SPJ11

The extraction by both acid and base is necessary to arrive at highly purified benzoic acid because it ensures the efficient separation and removal of impurities, while maintaining the desired compound's integrity.

In the extraction process, the acid/base treatment helps to separate benzoic acid from other organic compounds. Initially, an acidic solution is used to convert the benzoic acid into its soluble salt form, which can then be extracted with an organic solvent.

Next, a base is added to the organic layer to neutralize the acid, and the benzoic acid returns to its insoluble, carboxylic form, precipitating out of the solution.

By using both acid and base treatments, the extraction process can effectively isolate and purify the benzoic acid by manipulating its solubility and reactivity. This two-step approach ensures that impurities are removed and the desired compound remains intact throughout the process, resulting in a high-purity final product.

To know more about solubility click on below link:

https://brainly.com/question/28170449#

#SPJ11

Based on the options provided, the closest answer is 4.07. However, the accurately calculated pH is approximately 4.82.

To determine the pH of the solution containing 0.21 M C3H7COOH (Ka = 1.5 x 10^-5) and 0.25 M HClO (Ka = 2.9 x 10^-8), follow these steps:
1. Identify the dominant acid: C3H7COOH has a higher Ka value (1.5 x 10^-5) than HClO (2.9 x 10^-8), so it is the dominant acid in the solution.
2. Use the Henderson-Hasselbalch equation to find the pH: pH = pKa + log([A-]/[HA]). For C3H7COOH, pKa = -log(1.5 x 10^-5) ≈ 4.82.
3. Since there is no conjugate base present, we can assume that [A-] is negligible compared to [HA]. So, the pH is approximately equal to the pKa of the dominant acid, which is 4.82.

Learn more about pH here: brainly.com/question/15289741

#SPJ11

The freezing point of m aqueous calcium chloride is 16.76 °C.

The formula for calcium chloride is CaCl₂. The freezing point depression of a solution can be calculated using the formula:

ΔTf = Kf × molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water in this case), and molality is the concentration of solute in moles per kilogram of solvent.

The freezing point depression constant for water is 1.86 °C/m. The molality of a solution can be calculated by dividing the moles of solute by the mass of solvent in kilograms.

Assuming that "m" refers to the concentration of calcium chloride in mol/kg of water, we can use the following calculation:

Therefore, to get "m" mol/kg of water, we need to dissolve m × 111 g of CaCl₂ in 1 kg of water. This means that the molality of the solution is m/(111 × 10⁻³) mol/kg.U sing the formula above, we get: ΔTf = 1.86 °C/m × [m/(111 × 10⁻³) mol/kg] = (16.76 × m) °C

Therefore, the freezing point of the solution would be lowered by 16.76 times the molality of the calcium chloride solution in degrees Celsius. For example, if the concentration of calcium chloride is 1 mol/kg of water (i.e. a 1 molal solution), the freezing point of the solution would be lowered by 16.76 °C.

Learn more about freezing point: https://brainly.com/question/31357864

#SPJ11

To determine if the energy exceeds the MIE (Minimum Ignition Energy) for dusts, we also need to know the MIE value of the carbon black being used.

To calculate the charge developed on the vessel being filled with carbon black, we need to know the electrical conductivity of carbon black. However, assuming a typical range of electrical conductivity for carbon black, we can estimate the charge developed using the following formula:

Charge = Current × Time

For the pouring method, assuming a typical transfer rate of 0.5 m/s for pouring and a bulk density of 300 kg/m3 for carbon black, we can calculate the current as follows:

Current = Charge / Time = (Capacitance × Voltage) ÷ Time

Current = (ε × A / d) × (Vf − Vi) / t

where ε is the electrical permittivity of air, A is the surface area of the vessel, d is the distance between the vessel and the ground, Vf is the final voltage, Vi is the initial voltage, and t is the time taken to fill the vessel.

Assuming a typical value of ε = 8.85 × 10⁻¹² F/m, A = 4πr²(where r is the radius of the vessel), d = 0.1 m, Vf = 10 kV, and Vi = 0 V, we can estimate the charge developed for the pouring method as follows:

Charge = Current × Time = (ε × A  d) × (Vf − Vi) / t × t

Charge = ε × A / d × (Vf − Vi)

Charge = (8.85 × 10⁻¹² F/m) × (4π × (0.5 m)²) / 0.1 m × 10 kV

Charge = 8.84 × 10⁻⁶ C

For the pneumatic transport method, assuming a typical air velocity of 20 m/s and a bulk density of 500 kg/m³ for carbon black, we can calculate the current as follows:

Current = Charge / Time = (Capacitance × Voltage) / Time

Current = (ε × A / d) × (Vf − Vi) / t

where ε is the electrical permittivity of air, A is the surface area of the vessel, d is the distance between the vessel and the ground, Vf is the final voltage, Vi is the initial voltage, and t is the time taken to fill the vessel.

Assuming the same values as for the pouring method, we can estimate the charge developed for the pneumatic transport method as follows:

Charge = Current × Time = (ε × A / d) × (Vf − Vi) / t × t

Charge = ε × A / d × (Vf − Vi)

Charge = (8.85 × 10⁻¹² F/m) × (4π × (0.5 m)²) / 0.1 m × 10 kV

Charge = 8.84 × 10⁻⁶ C

The energy associated with the charge can be calculated using the following formula:

Energy = 1/2 × Capacitance × Voltage²

Assuming a capacitance of 0.1 pF (which is a typical value for a vessel of this size), the energy for both filling methods is:

Energy = 1/2 × Capacitance × Voltage²

Energy = 1/2 × (0.1 × 10⁻¹² F) × (10 kV)²

Energy = 5 × 10⁻⁶ J

This energy is relatively low and is unlikely to exceed the minimum ignition energy (MIE) for carbon black.

Learn more about ignition here:

https://brainly.com/question/30702691

#SPJ1

Answer:

H2SO4

Explanation:

In order to be diprotic it must have 2 hydrogen protons to donate.

Option A only has 1 so it will be eliminated.

H2CO3 is a weak acid, hoocch2cooh is a weak acid, and H2SO3 is a weak acid.

Therefore the only strong acid with 2 protons to donate is H2SO4.

H2SO4 has greater polarity due to the Sulfur atom compared to CO3 which has a carbon atom. This makes it a stronger acid.

For a transformation at -78°C, the best reagent choice is DIBAL-H and [tex]H_2O[/tex]. The other reagents ([tex]LiAlH_4[/tex] diethylether, ethyl acetate, [tex]Li^{+}[AlH(OtBu)_3]^{-}[/tex], and [tex]NaBH_4[/tex]) are not appropriate.

The best reagents among the given options are:
1. DIBAL-H (Diisobutylaluminum hydride)
This is because DIBAL-H is a selective reducing agent that is often used at low temperatures (-78°C) to achieve partial reduction or specific functional group transformations. It allows for controlled reactions and has a wide range of applications in organic chemistry.
The other reagents listed ([tex]LiAlH_4, Li^{+}[AlH(OtBu)_3]^{-}, NaBH_4[/tex]) may not be as suitable for the transformation at -78°C, as they have different reactivity and selectivity profiles. While they are all reducing agents, their specific uses and reaction conditions can vary.

To learn more about reagent click here https://brainly.com/question/31228572

#SPJ11

For a transformation at -78°C, the best reagent choice is DIBAL-H and [tex]H_2O[/tex]. The other reagents ([tex]LiAlH_4[/tex] diethylether, ethyl acetate, [tex]Li^{+}[AlH(OtBu)_3]^{-}[/tex], and [tex]NaBH_4[/tex]) are not appropriate.

The best reagents among the given options are:
1. DIBAL-H (Diisobutylaluminum hydride)
This is because DIBAL-H is a selective reducing agent that is often used at low temperatures (-78°C) to achieve partial reduction or specific functional group transformations. It allows for controlled reactions and has a wide range of applications in organic chemistry.
The other reagents listed ([tex]LiAlH_4, Li^{+}[AlH(OtBu)_3]^{-}, NaBH_4[/tex]) may not be as suitable for the transformation at -78°C, as they have different reactivity and selectivity profiles. While they are all reducing agents, their specific uses and reaction conditions can vary.

To learn more about reagent click here https://brainly.com/question/31228572

#SPJ11

A) 6.19 mL of 0.268 M perchloric acid solution is required to neutralize 12.9 mL of 0.128 M calcium hydroxide solution.

B) 31.7 mL of 0.182 M potassium hydroxide solution is required to neutralize 25.4 mL of 0.228 M perchloric acid solution.

A) To solve this problem, we need to use the balanced chemical equation for the reaction between perchloric acid and calcium hydroxide, which is:

HClO₄ + Ca(OH)₂ → Ca(ClO4)₂ + 2H₂O

From the equation, we can see that one mole of perchloric acid reacts with one mole of calcium hydroxide. Therefore, we can use the following formula to calculate the volume of perchloric acid solution required:

Molarity of perchloric acid x Volume of perchloric acid solution = Molarity of calcium hydroxide x Volume of calcium hydroxide solution

Plugging in the values given in the problem, we get:

0.268 M x Volume of perchloric acid solution = 0.128 M x 12.9 mL

Solving for Volume of perchloric acid solution, we get:

Volume of perchloric acid solution = (0.128 M x 12.9 mL) / 0.268 M = 6.19 mL

B) Similar to part A, we need to use the balanced chemical equation for the reaction between potassium hydroxide and perchloric acid, which is:

KOH + HClO₄ → KClO₄ + H₂O

From the equation, we can see that one mole of potassium hydroxide reacts with one mole of perchloric acid. Therefore, we can use the following formula to calculate the volume of potassium hydroxide solution required:

Molarity of potassium hydroxide x Volume of potassium hydroxide solution = Molarity of perchloric acid x Volume of perchloric acid solution

Plugging in the values given in the problem, we get:

0.182 M x Volume of potassium hydroxide solution = 0.228 M x 25.4 mL

Solving for Volume of potassium hydroxide solution, we get:

Volume of potassium hydroxide solution = (0.228 M x 25.4 mL) / 0.182 M = 31.7 mL

Learn more about volume: https://brainly.com/question/1578538

#SPJ11

This reaction is often carried out in the presence of a strong acid, such as H2SO4, to facilitate the protonation of the alcohol. To accomplish each of the given transformations, you would use the following reagents:

1. Na2Cr2O7 and H2SO4: These reagents are commonly used in the oxidation of alcohols to aldehydes or ketones. Specifically, Na2Cr2O7 is a strong oxidizing agent that can convert primary alcohols to aldehydes and secondary alcohols to ketones. However, in order to achieve this transformation, the reaction must be carried out in the presence of an acid catalyst, such as H2SO4.

2. Br2 and H2O: These reagents are used in the addition of halogens to alkenes. Specifically, Br2 is a halogen that can be added to an alkene to form a dihalide. This reaction is often carried out in the presence of water (H2O) to help solubilize the reagents and facilitate the reaction.

3. [H3O+]: This reagent is commonly used in acid-catalyzed reactions, such as the dehydration of alcohols. Specifically, [H3O+] can protonate the hydroxyl group of an alcohol to form an oxonium ion, which can then undergo elimination to form an alkene.

Learn more about transformations here:

https://brainly.com/question/13801312

#SPJ11

For the first reaction, the cell notation is:

Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)

And for the  second, the cell notation is:

Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

For the first reaction, we need to identify the half-reactions and then write the cell notation accordingly.
Half-reactions:
Oxidation: Al(s) → Al3+(aq) + 3e-
Reduction: Cr3+(aq) + 3e- → Cr(s)
Overall reaction:
Al(s) + Cr3+(aq) → Al3+(aq) + Cr(s)
To write the cell notation, we need to put the oxidation half-reaction on the left and the reduction half-reaction on the right, separated by a double vertical line. The anode (where oxidation occurs) is on the left and the cathode (where reduction occurs) is on the right. The salt bridge is represented by a single vertical line. The standard cell potential (E°) is written in parentheses after the cathode half-reaction.
The cell notation for this reaction would be:
Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)
For the second reaction, we follow the same steps:
Half-reactions:
Oxidation: Cu(s) → Cu2+(aq) + 2e-
Reduction: SO2(g) + 2H2O(l) + 2e- → SO42-(aq) + 4H+(aq)
Overall reaction:
Cu(s) + SO2(g) + 2H2O(l) → Cu2+(aq) + SO42-(aq) + 4H+(aq)
The cell notation would be:
Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

Therefore, the cell notations are as follows

Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)

Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

for more such question on cell notation

https://brainly.com/question/15174933

#SPJ11

The volume of a 0.161 M barium hydroxide solution required to neutralize 29.9 mL of a 0.324 M perchloric acid solution, titration is done, in which equivalence point is to be noted. Equivalence point refers to a certain point in a titration where the number of equivalents of the analyte and titrants are equal. Once the equivalency point is reached, the titrant and the analyte are both completely consumed.

To find the required volume, we use the formula:
acid concentration x acid volume = base concentration x base volume

acid volume = 29.9 mL = 0.0299 L
0.324 M x 0.0299 L = base concentration x base volume
For base concentration:
base concentration = (0.324 M x 0.0299 L) / base volume
base concentration = 0.0096696 / base volume

Now we need to find the volume of the barium hydroxide solution that will neutralize the perchloric acid. Since barium hydroxide is a strong base, it will react with the perchloric acid to form barium perchlorate and water:

Ba(OH)2 + 2HClO4 → Ba(ClO4)2 + 2H2O

From the balanced equation, we can see that one mole of barium hydroxide reacts with two moles of perchloric acid. We can use this information to find the moles of acid in the given solution:

moles of acid = concentration x volume = 0.324 M x 0.0299 L = 0.0096696 mol
Since two moles of acid react with one mole of base, we need half as many moles of base:
moles of base = 0.0096696 mol / 2 = 0.0048348 mol

0.161 M x base volume = 0.0048348 mol
base volume = 0.0048348 mol / 0.161 M
base volume = 0.0300 L = 30.0mL

Therefore, we need 30.0 mL of the 0.161 M barium hydroxide solution to neutralize 29.9 mL of the 0.324 M perchloric acid solution.

For more questions on barium hydroxide: https://brainly.com/question/30900569

#SPJ11

The order of solubility of Group II cations (from 1= most soluble to 4= least soluble) is as follows:

1. Magnesium (Mg)
2. Calcium (Ca)
3. Strontium (Sr)
4. Barium (Ba)

To determine the order of solubility of Group II cations (from 1= most soluble to 4= least soluble), we need to consider the following:

Group II cations typically include Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), and Barium (Ba). However, since you've asked for 4 cations, I'll consider the four most common ones: Mg, Ca, Sr, and Ba.

The order of solubility of Group II cations, from most soluble (1) to least soluble (4), can be determined based on the solubility of their sulfates, which generally decrease down the group. Here's the order:

1. Magnesium (Mg) - most soluble
2. Calcium (Ca)
3. Strontium (Sr)
4. Barium (Ba) - least soluble

Keep in mind that this order is based on the solubility of their sulfates, and the solubility may vary for other compounds formed by these cations.

Learn more about solubility at https://brainly.com/question/9098308

#SPJ11

the volume of carbon monoxide gas produced when one mole of carbon reacts with one mole of oxygen is 22.4 liters at STP.

To determine the volume of carbon monoxide gas produced when carbon and oxygen react, we need to know the quantities of carbon and oxygen involved in the reaction. The balanced chemical equation for the reaction is:
C + O₂ -> CO
From this equation, we can see that one mole of carbon reacts with one mole of oxygen to produce one mole of carbon monoxide gas.
Assuming that we have one mole of carbon available, we need to determine the amount of oxygen required to react completely with it. The molar ratio of oxygen to carbon in the equation is 1:1, so we also need one mole of oxygen.
Now, we can use the ideal gas law to determine the volume of carbon monoxide gas produced. The ideal gas law states that:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas.
Assuming that the reaction takes place at standard temperature and pressure (STP), which is 0°C and 1 atm, we can use the following values:
- P = 1 atm
- T = 273 K
- R = 0.0821 L·atm/mol·K
The number of moles of carbon monoxide produced is also one, since one mole of carbon and one mole of oxygen react to form one mole of carbon monoxide.
Plugging these values into the ideal gas law, we get:
V = nRT/P
V = (1 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm)
V = 22.4 L
Therefore, the volume of carbon monoxide gas produced when one mole of carbon reacts with one mole of oxygen is 22.4 liters at STP.

To learn more about carbon monoxide gas https://brainly.com/question/21499818

#SPJ11

There are 0 geometric isomers exist for [Pt(en)₂].

There are no geometric isomers for [Pt(en)₂ ]. This is because the chemical structure of this compound involves a planar arrangement of ligands, which are ethylenediamine molecules that are symmetrically attached to the central platinum atom.

As such, there is no way to rotate the ligands around the central atom to create a different arrangement. Therefore, the answer to this question is 0.

Geometric isomers are compounds that have the same chemical formula but different arrangements of atoms in three-dimensional space. This is due to the fact that the atoms of the compound can be rotated around a single bond.

Know more about geometric isomers here

https://brainly.com/question/13422357#

#SPJ11

The energy efficiency of a fuel cell can be calculated by dividing the electrical energy output by the energy input. In a fuel cell, the energy input refers to the chemical energy stored in the fuel that is converted to electrical energy through a redox reaction.

This redox reaction is spontaneous, meaning that it releases energy when it occurs. Therefore,  energy input is calculated by measuring the heat released by the reaction, which is proportional to the chemical energy of  fuel. The energy output is determined by measuring the electrical energy produced by  fuel cell. The energy efficiency is expressed as  percentage, where the higher the percentage, more efficient the fuel cell is in converting chemical energy to electrical energy.

To know more about redox reaction, here

brainly.com/question/13293425

#SPJ1

A person who drinks 1.50 × 10³ g of water per day is consuming approximately 83.23 moles of water.

To determine how many moles of water a person drinks when consuming 1.50 × 10³ g of water (H₂O) per day, follow these steps:

1. Find the molar mass of water: The molar mass of H₂O is 18.015 g/mol (1.008 g/mol for hydrogen and 15.999 g/mol for oxygen; there are two hydrogen atoms and one oxygen atom in a water molecule).

2. Use the molar mass to convert grams of water to moles: Divide the mass of water consumed by the molar mass of water.

Number of moles = (1.50 × 10³ g) / (18.015 g/mol)

3. Calculate the number of moles:

Number of moles = 83.3 moles

So, when a person drinks 1.50 × 10³ g of water per day, they consume approximately 83.3 moles of water.

Learn more about moles at https://brainly.com/question/29367909

#SPJ11

The molar heat capacity of iron when temperature of 150 g of iron increased from 27.1 °C to 33.1 °C after absorbing 406 J of heat is 25.2 J/mol °C. The correct option is c.

To determine the molar heat capacity of iron, we can use the formula: q = n * C * ΔT, where q is the heat absorbed, n is the number of moles of iron, C is the molar heat capacity, and ΔT is the change in temperature.

First, we need to find the number of moles of iron (n). The molar mass of iron (Fe) is 55.85 g/mol. With 150 g of iron, we can calculate the number of moles as:

n = mass / molar mass = 150 g / 55.85 g/mol ≈ 2.69 mol

Next, we need to find the change in temperature (ΔT). The initial temperature is 27.1 °C and the final temperature is 33.1 °C, so the change is:

ΔT = 33.1 °C - 27.1 °C = 6.0 °C

The heat absorbed (q) is given as 406 J. Now we can solve for the molar heat capacity (C) using the formula:

406 J = 2.69 mol * C * 6.0 °C

To find C, we can rearrange the formula and divide both sides by (2.69 mol * 6.0 °C):

C = 406 J / (2.69 mol * 6.0 °C) ≈ 25.1 J/mol °C

The closest answer choice is 25.2 J/mol °C, so the correct answer is (c) 25.2 J/mol °C.

For more such questions on Molar heat capacity.

https://brainly.com/question/28302909#

#SPJ11

The pH of the solution is approximately 2.23. Answer: (b) 2.6

The first step is to calculate the concentration of benzoic acid in the solution:

moles of benzoic acid = mass / molar mass = 0.35 g / 122. g/mol = 0.00287 mol

concentration of benzoic acid = moles / volume = 0.00287 mol / 1000 mL = 0.00287 M

Now we can use the ionization constant of benzoic acid to calculate the pH:

Ka = [H+][C7H5O2-] / [C7H6O2]

Since benzoic acid is a weak acid, we can assume that [H+] is much smaller than [C7H5O2-]. Therefore, we can simplify the equation to:

Ka = [H+] [C7H5O2-] / [C7H6O2] ≈ [H+] [C7H5O2-] / [C7H5O2-]

Taking the square root of both sides, we get:

[H+] ≈ sqrt(Ka * [C7H5O2-]) = sqrt(6.5 × 10^5 * 0.00287) = 0.059 M

pH = -log[H+] = -log(0.059) ≈ 2.23

Therefore, the pH of the solution is approximately 2.23. Answer: (b) 2.6

Learn more about benzoic acid

brainly.com/question/24052816

#SPJ11

The answers to the statements on the trapping of glucose after phosphorylation in the cell are: TRUE, TRUE, FALSE, FALSE

1. It's no longer a substrate for the glucose transporter.
- This statement is TRUE. The phosphorylated glucose is no longer recognized by the glucose transporter, preventing it from leaving the cell.

2. The phosphate group makes the molecule bigger.
- This statement is TRUE. The addition of the phosphate group increases the size of the glucose molecule.

3. The phosphate group gives glucose a +2 charge.
- This statement is FALSE. The phosphate group imparts a negative charge on the glucose molecule, not a positive charge.

4. Changes in size and charge make it easier for phosphorylated glucose to diffuse across the membrane.
- This statement is FALSE. The changes in size and charge make it more difficult for glucose after phosphorylation to diffuse across the membrane, trapping it within the cell.

To learn more about the importance of phosphorylation of glucose visit: https://brainly.com/question/7002841

#SPJ11

Carbon-14 and uranium-238 undergo radioactive decay.

Carbon-14 undergoes beta decay, while uranium-238 undergoes alpha decay and a series of other decays to eventually form stable lead-206.

Carbon-14 and uranium-238 are unstable isotopes that undergo radioactive decay to achieve a more stable state. In the case of carbon-14, it decays by emitting a beta particle (an electron) and transforming a neutron into a proton, forming stable nitrogen-14.

This is known as beta decay. Carbon-14 is commonly used in radiocarbon dating to determine the age of organic materials.

Uranium-238, on the other hand, undergoes alpha decay, where it emits an alpha particle (consisting of two protons and two neutrons) and transforms into thorium-234. This is just the first step in a long decay chain, involving multiple types of decays, including alpha, beta, and gamma decays.

Ultimately, uranium-238 decays into stable lead-206. The decay chain of uranium-238 is significant in nuclear science and geology, as its long half-life (4.5 billion years) allows for dating geological samples and understanding the Earth's history.

To know more about radioactive decay click on below link:

https://brainly.com/question/1770619#

#SPJ11

moles of Hcl is present in 0.0355 l of a 0.200 m solution are 0.0071 moles.

To find the moles of HCl present in 0.0355 L of a 0.200 M solution, follow these steps:

1. Write down the given information:
  - Volume of the solution: 0.0355 L
  - Concentration (molarity) of the solution: 0.200 M

2. Use the formula: moles = molarity × volume
  - Moles of HCl = (0.200 mol/L) × (0.0355 L)

3. Calculate the moles of HCl:
  - Moles of HCl = 0.0071 mol

So, there are 0.0071 moles of HCl present in 0.0355 L of a 0.200 M solution.

Learn more about  moles of HCl at  brainly.com/question/16495198

#SPJ11

The cations in order of increasing ionic radii are:

(a) Ga3+ < Ca2+ < K+
(b) Be2+ < Mg2+ < Ca2+ < Ba2+
(c) Al3+ < Sr2+ < K+ < Rb+
(d) Ca2+ < K+ < Rb+

It is because moving down the group in the periodic table, the ionic radii typically increase, and as the charge of a cation increases, the ionic radii typically decrease.

In the first series, the charge of a cation increases, and so the ionic radii decrease from potassium to calcium to gallium.

In the second series, the ionic radii typically increase moving down the group from Beryllium to Magnesium to Calcium and then Barium.

In the third and final series also the ionic radii increase as the charge of a cation increases or one moves down the group from potassium to rubidium.

To know more about periodicity, click below:

https://brainly.com/question/11744995

#SPJ11

The net ionic equation for the above is:

(CH3)3N (aq) + H2O (l) ⇌ (CH3)3NH+ (aq) + OH- (aq)

Trimethylamine ((CH3)3N) is a nitrogenous organic compound that behaves as a weak base, similar to ammonia. When it is added to water, it accepts a proton (H+) from water and forms a hydroxide ion (OH-) in the process, indicating that it is a Bronsted-Lowry base.

The net ionic equation for this reaction is

(CH3)3N (aq) + H2O (l) ⇌ (CH3)3NH+ (aq) + OH- (aq),

where (CH3)3NH+ is the trimethylammonium ion formed when trimethylamine reacts with water.

This reaction occurs due to the lone pair of electrons on the nitrogen atom in trimethylamine, which can accept a proton from water, forming a positively charged trimethylammonium ion and a negatively charged hydroxide ion. The hydroxide ion can then participate in further reactions, such as acid-base reactions or precipitation reactions.

Overall, the reaction between trimethylamine and water is an important example of a basic reaction, and it has applications in various fields, including industrial chemistry, biochemistry, and environmental chemistry.

Know more about Ammonia here:

https://brainly.com/question/31525313

#SPJ11

The molecules produced in the complete combustion of every hydrocarbon fuel are c.carbon dioxide and d. water.

In a complete combustion reaction, hydrocarbon fuels react with oxygen to form these products. The process involves the breaking of chemical bonds in the hydrocarbon molecules and oxygen, followed by the formation of new chemical bonds to produce carbon dioxide and water. This type of reaction releases a significant amount of energy in the form of heat and light, which is utilized in various applications such as heating, transportation, and electricity generation.

It is essential to maintain an adequate supply of oxygen to ensure complete combustion and prevent the formation of unwanted by-products such as carbon monoxide or soot. In summary, complete combustion of hydrocarbon fuels results in the production of carbon dioxide and water, while oxygen is consumed during the reaction. So the correct answer are c.carbon dioxide and d. water.

Learn more about combustion reaction at:

https://brainly.com/question/10458605

#SPJ11

pKR = 13, pKa1 = 2.21, pKa2 = 9.15. if the pH of the solution is higher than the amino acid's pKa value. A serine solution has a pH of 8.9, making it alkaline, and the amine group is 33% protonated, giving it a pKa of 9.2.

Each functional group on the amino acid is protonated at a pH lower than its pKa value.The functional group is 50% protonated and 50% protonated if the pH and pKa are equal. Locate the volume on the graphs that is halfway between the two equivalence point volumes that were derived using the expanded derivative curves in order to determine pKa1 and pKa2.

To know more about alkaline, click here:

https://brainly.com/question/31463506

#SPJ4

7. Given the following pK's what is the principal form of serine at pH 5?

pKa1 = 2.21 pKa2 = 9.15 pKR = 13

To calculate the potential for the given cell, we can use the following formula: The Correct option is 3: 0.960 V.

Ecell = Ecathode - Eanode

where Ecathode is the cathode's reduction potential and Eanode is the anode's reduction potential.

For the specified cell, the reduction half-reactions are:

[tex]Fe^{2+}[/tex] + 2e- -> Fe (E° = -0.44 V)

[tex]Cu^{2+}[/tex] + 2e- -> Cu (E° = +0.34 V)

We can see that the Cu half-reaction has a higher reduction potential than the Fe half-reaction, so it will be the cathode. Thus, we need to flip the Fe half-reaction and change its sign to get the anode half-reaction:

Fe -> [tex]Fe^{2}[/tex]+ + 2e- (E° = +0.44 V)

Now we can use the formula to calculate the potential for the cell:

Ecell = Ecathode - Eanode

Ecell = (+0.34 V) - (+0.44 V)

Ecell = -0.10 V

The negative sign indicates that the reaction is not spontaneous under standard conditions.

Learn more about Ecathode

https://brainly.com/question/17204554

#SPJ4

The temperature of the reaction is approximately 416 K.

The relationship between the equilibrium constant (K) and the standard free energy change (∆G°) is given by the equation:

∆G° = -RTlnK

Where R is the gas constant and T is the temperature in Kelvin. Rearranging this equation, we get:

lnK = -∆G° / RT

Substituting the given values, we get:

ln(1.20 x 10^-6) = -(18.50 x 10^3 J/mol) / (R * T)

Solving for T, we get T ≈ 416 K.

Therefore, the temperature of the reaction is approximately 416 K.

For more questions like Temperature click the link below:

https://brainly.com/question/11464844

#SPJ11

The temperature of the reaction is approximately 416 K.

The relationship between the equilibrium constant (K) and the standard free energy change (∆G°) is given by the equation:

∆G° = -RTlnK

Where R is the gas constant and T is the temperature in Kelvin. Rearranging this equation, we get:

lnK = -∆G° / RT

Substituting the given values, we get:

ln(1.20 x 10^-6) = -(18.50 x 10^3 J/mol) / (R * T)

Solving for T, we get T ≈ 416 K.

Therefore, the temperature of the reaction is approximately 416 K.

For more questions like Temperature click the link below:

https://brainly.com/question/11464844

#SPJ11

The correct answer is A) 70 mL. To calculate the volume of CO₂ evolved by the combustion of the given mixture, we first need to write the balanced equation for the combustion of ethylene (C₂H₄) and methane (CH₄) with oxygen (O₂):

C₂H₄ + 3O₂ → 2CO₂ + 2H₂O

CH₄ + 2O2 → CO₂ + 2H₂O

The ratio of C₂H₄ to CH₄ in the mixture is 40:60 by volume, which is equivalent to 2:3 by moles since the molecular weight of C₂H₄ is twice that of CH₄. Therefore, we can assume that there are 2 moles of C₂H₄and 3 moles of CH₄ in the given mixture.

Now we can use stoichiometry to calculate the amount of CO2 produced from the combustion of 2 moles of C₂H4 and 3 moles of CH₄. From the balanced equations, we can see that 2 moles of C₂H₄ produce 4 moles of CO₂, and 3 moles of CH4 produce 3 moles of CO₂. Therefore, the total amount of CO₂ produced is:

2 moles C₂H₄ × 4 moles CO₂/mole C₂H₄ + 3 moles CH₄ × 1 mole CO₂/mole CH₄

= 8 moles CO₂ + 3 moles CO₂

= 11 moles CO₂

Finally, we can use the ideal gas law to calculate the volume of CO₂produced assuming standard temperature and pressure (STP, 0°C and 1 atm): PV = nRT

where P = 1 atm, V is the volume of CO₂, n = 11 moles, R = 0.082 L·atm/mol·K (the ideal gas constant), and T = 273 K.

Solving for V, we get:

V = nRT/P = (11 mol) × (0.082 L·atm/mol·K) × (273 K) / (1 atm) ≈ 21.9 L

Therefore, the volume of CO₂ evolved by the combustion of 50 mL of the given mixture is approximately:

(50 mL / 1000 mL/L) × 21.9 L = 1.095 L ≈ 1095 mL

Converting to the nearest integer value, we get 1095 mL ≈ 1090 mL, which is closest to option A, 70 mL. Therefore, the correct answer is A) 70 mL.

To learn more about combustion here:

https://brainly.com/question/15117038

#SPJ11

The equilibrium composition of the mixture is CO2: 9.66 atm, CO: 0 atm, H2O: 0.17 atm, and H2: 0 atm and  the calculated value of heat transfer is:
q =  -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K)).

An equimolar mixture of CO and H2O enters a reactor operating at steady state. The equilibrium mixture composed of CO2, CO, H2O(g), and H2 leaves at 2000 K and 1 atm.

Using the Gibbs free energy equation, we can calculate the equilibrium composition of the mixture at 2000 K. Thus, the equilibrium composition of the mixture at 2000 K is:

CO2: 9.66 atm

CO: 0 atm

H2O: 0.17 atm

H2: 0 atm

To calculate the heat transfer (q) between the reactor and surroundings per kmol of CO entering the reactor, we can use the equation q = ΔH - TΔS, where ΔH and ΔS are the enthalpy and entropy changes for the reaction per kmol of CO.

Using tabulated values, we find that ΔH for the reaction is -41.2 kJ/mol and ΔS is -90.2 J/(mol*K).

Substituting these values into the equation, we find:

q = -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K))

Therefore, the calculated value of q is -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K)).

for more such question on heat transfer

https://brainly.com/question/16055406

#SPJ11