Answer:
P = 800 Pa
Explanation:
The pressure of water at the bottom of the pot can be given by the following formula:
[tex]P = \rho g h[/tex]
where,
P = Pressure at the bottom of the pot = ?
ρ = density = 1000 kg/m³
h = height of water = 8 cm = 0.08 m
Therefore,
[tex]P = (1000\ kg/m^3)(10\ m/s^2)(0.08\ m)[/tex]
P = 800 Pa
A car initially at rest undergoes uniform acceleration for 6.32 seconds and covers a distance of 120 meters. What is the approximate acceleration of the car?
Answer:
Explanation:
The equation for acceleration is
[tex]a=\frac{v_f-v_0}{t}[/tex]. We have the initial velocity since we are told that the car started from rest. What we don't have is the final velocity. But we can find it because we were told that the car undergoes uniform acceleration, so the equation
d = rt will give us that final velocity.
120 = r(6.32) so the velocity or rate of the car is
r = 19 m/s. Plug that in to find the acceleration of the car:
[tex]a=\frac{19-0}{6.32}[/tex] so
a = 3.0 m/s/s
The ship was travelling 93 meters per second, 25 degrees above the x-axis Northeast. Determine the magnitude and direction of the horizontal vector component, Vx.
Answer: [tex]92.18\ m/s[/tex], east
Explanation:
Given
Ship is traveling at a speed of [tex]v=93\ m/s[/tex]
Direction of ship is [tex]25^{\circ}[/tex] North of east
If we break velocity vector in x and y axes then, the horizontal component is given by
[tex]\Rightarrow v_x=93\cos 25^{\circ}\\\Rightarrow v_x=92.18\ m/s[/tex]
The direction of horizontal component is towards east with magnitude of [tex]92.18\ m/s[/tex]
A 20 ohm and 60 ohm light bulb are put in series together which one would be brighter?
Answer:
The 60 Ohm bulb would be brighter than the 20 Ohm bulb.
Explanation:
Hi there!
Ohm's Law: [tex]V=IR[/tex] where V is voltage, I is current and R is resistance
Power equation: [tex]P=VR[/tex]
The greater the power of a bulb, the brighter it is.
The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:
[tex]P=I^2R[/tex]
Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.
I hope this helps!
Answer:
The 60 Ohm bulb would be brighter than the 20 Ohm bulb.
Explanation:
Hi there!
Ohm's Law: V=IRV=IR where V is voltage, I is current and R is resistance
Power equation: P=VRP=VR
The greater the power of a bulb, the brighter it is.
The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:
P=2RP=I
2
R
Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.
I hope this helps!
The equivalent resistance of a complex circuit is usually determined by a dividing the sum of the individual resistances by the number of resistances. b adding and subtracting individual resistances. c inspection. d simplifying the circuit into groups of series and parallel circuits.
Answer:
d
Explanation:
we simplify the circuit into groups to obtain a complete circuit I.e series and parallel circuit
A 9 kg box is placed on a 6 m tall shelf. What will be the kinetic energy of the box right before it hits the ground? (use g = 10 m/s/s)
Answer:
540 J
Explanation:
U at top equals to K at bottom if it's an isolated system therefore U at top is equals to 540 J so we can assume that at 0m U=0 (mgh) therefore the box has gained some velocity due to the acceleration due to g and we can calculate it using 1/2mv²
Reason whether or not work is done in the following cases:
A. a basketball player shoots a free throw.
B. a peasant pulls a rope tied to a donkey without being able to displace it from its position.
Answer:
A work is done because the object moved
B no work is done because the donkey didnt move
Explanation:
What happens to the wavelength of a wave if the frequency quadruples, but the wave is in the same medium?
A. The wavelength will go down to half the original amount.
B. The wavelength will go down to one-fourth of the original amount.
C. The wavelength will be quadruple.
D. The wavelength will double.
Answer:
I think C? I'm not sure totally though...
Explanation:
The firing of a bullet by a rifle causes the rifle to recoil backwards. The speed of
the rifle's recoil is smaller than the bullet's forward speed because the___
A.)force against the rifle is relatively small
B.)speed is mainly concentrated in the bullet
C.)rifle has lots of mass
D.)momentum of the rifle is unchanged
Answer:c i.e. rifle has lots of mass
Explanation:It's because we know that the force of recoiling is same. But since the mass of rifle is very much greater than that of the bullet, it's balanced by the less speed of the recoiling of the rifle.
How much energy is required to move an electron through a potential difference of
12 V?
1) 1.9 x 10^- 18 )
2) 7.5 x 10^- 18 )
3) 1.3 x 10^-20)
4) 7.5 x 10^18 J
A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 14 A, while that of the vacuum cleaner is 4.2 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 16 minutes to the energy used by the vacuum cleaner in 43 minutes.
Answer:
The correct solution is:
(a) 1680 W
(b) 504 W
(c) 1.240
Explanation:
The given values are:
Voltage,
V = 120 V
Current of blow dryer,
I₁ = 14 A
Current of vacuum cleaner,
I₂ = 4.2 A
Time,
t₁ = 16 min
t₂ = 43 min
As we know,
⇒ [tex]Power (P) = VI[/tex]
(a)
For blow dryer:
⇒ [tex]P_1=V\times I_1[/tex]
[tex]=120\times 14[/tex]
[tex]=1680 \ W[/tex]
(b)
For Vacuum cleaner:
⇒ [tex]P_2=V\times I_2[/tex]
[tex]=120\times 4.2[/tex]
[tex]=504 \ W[/tex]
(c)
The ratio will be:
= [tex]\frac{Blow \ dryer \ energy}{Vacuum \ cleaner \ energy}[/tex]
= [tex]\frac{P_1\times t_1}{P_1\times t_2}[/tex]
= [tex]\frac{1680\times 16}{504\times 43}[/tex]
= [tex]\frac{26880}{21672}[/tex]
= [tex]1.240[/tex]
A uniform plank 4 m long is pivoted about its center to an angle of 30° with the vertical. What magnitude of force
must be applied 0.5 m from the pivot to maintain equilibrium with a 4 kg mass hanging from one end?
A. 80 N
B. 20 N
C. 40 N
D. 60 N
E. 100 N
Answer:
A. 80 N
Explanation:
Since the uniform plank is pivoted at its center at an angle of 30 to the vertical, then it is 90° - 30° = 60° to the horizontal.
Let L be the length of the plank = 4 m, the perpendicular distance of the 4 kg mass form the pivot point is Lcos60°/2. Then the moment of the 4 kg mass about its pivot point is mgLcos60/2 where m = mass = 4 kg and g = acceleration due to gravity = 10 m/s²
Let F be the force applied at 0.5 m from the pivot point. The perpendicular distance of F from the pivot point is 0.5cos60°. Thus the moment of this force about the pivot point is F × 0.5cos60° = 0.5Fcos60°
Since both moments are the same for equilibrium,
mgLcos60/2 = 0.5Fcos60°
F = mgL/(2 × 0.5 m)
F = 4 kg × 10 m/s² × 4 m/1 m
F = 80 kgm/s²
F = 80 N
8× +5+9×+3 how can I solve this
Answer:
collect like terms then add=>8x+9x+5+3
=>8x+9x+5+3=>17x+8
I WILL MARK YOU THE BRAINLIEST LINKS WILL BE REPORTED
put the correct words with the correct pictures
For general projectile motion with no air resistance, the vertical component of a projectile's acceleration For general projectile motion with no air resistance, the vertical component of a projectile's acceleration remains a non-zero constant. continuously decreases. first decreases and then increases. is always zero. continuously increases.
Answer:
Rmains constant
Explanation:
The equation of the trajectory of a projectile motion is presented as follows;
[tex]Y = x \cdot tan \theta -\dfrac{g \cdot x^2}{2 \cdot u^2 \cdot cos^2 \theta}[/tex]
The vertical componet of the prjectile motion is
y = (u·sinθ)·t - g·t²/2
Where;
θ = The angle with which the projectile is launched
x = The horizontal distance
u = The initial velocity of the projectile
g = The acceleration due to gravity = Constant
t = The time of motion
The acceleration acting on the projectile is the 'g' which is the constant acceleration due to gravity
Therefore, for general projectile motion with no air resistance, the vertical component of the projectile acceleration remains constant
what 3 words or 3 phrases that would help you remember the steps to Covalent and Ionic bonding?
Answer:
non metals and non metals=covalent bond
metals and non metals =ionic bond
transfer all the valence electron to form ionic bond
share valence electron to form covalent bond
The series circuit depicts three resistors connected to a voltage
source. The voltage source (AVtot) is a 110-V source and the resistor
values are 7.2 (R1), 6.2 A2 (R2) and 8.6 22 (R3).
b. Determine the current in the circuit.
A
c. Determine the voltage drops across each individual resistor.
Answer:
B. Current in the circuit is 5.
Ci. Voltage across 7.2 Ω (R₁) is 36 V
Cii. Voltage across 6.2 Ω (R₂) is 31 V
Ciii. Voltage across 8.6 Ω (R₃) is 43 V
Explanation:
We'll begin by calculating the number equivalent resistance in the circuit. This can be obtained as follow:
Resistor 1 (R₁) = 7.2 Ω
Resistor 2 (R₂) = 6.2 Ω
Resistor 3 (R₃) = 8.6 Ω
Equivalent Resistance (R) =?
Since the resistors are in series connection, the equivalent resistance can be obtained as follow:
R = R₁ + R₂ + R₃
R = 7.2 + 6.2 + 8.6
R = 22 Ω
B. Determination of the current.
Voltage (V) = 110 V
Resistance (R) = 22 Ω
Current (I) =?
V = IR
110 = I × 22
Divide both side by 22
I = 110 / 22
I = 5 A
Therefore, the current in the circuit is 5.
Ci. Determination of the voltage across 7.2 Ω (R₁)
Resistor 1 (R₁) = 7.2 Ω
Current (I) = 5 A
Voltage 1 (V₁) =?
V₁ = IR₁
V₁ = 5 × 7.2
V₁ = 36 V
Therefore, the voltage across 7.2 Ω (R₁) is 36 V
Bii. Determination of the voltage across 6.2 Ω (R₂)
Resistor 2 (R₂) = 6.2 Ω
Current (I) = 5 A
Voltage 2 (V₂) =?
V₂ = IR₂
V₂ = 5 × 6.2
V₂ = 31 V
Therefore, the voltage across 6.2 Ω (R₂) is 31 V
Ciii. Determination of the voltage across 8.6 Ω (R₃)
Resistor 3 (R₃) = 8.6 Ω
Current (I) = 5 A
Voltage 3 (V₃) =?
V₃ = IR₃
V₃ = 5 × 8.6
V₃ = 31 V
Therefore, the voltage across 8.6 Ω (R₃) is 43 V
3. How do energy transformations, energy transfers, and conservation of energy allows you to track how energy moves through in a system?
Answer:
The law of conservation of energy states that when one form of energy is transformed to another, no energy is destroyed in the process. According to the law of conservation of energy, energy cannot be created or destroyed. So the total amount of energy is the same before and after any transformation
Explanation:
The energy in a system always transforms from one form to another without any significant loss or addition. It simply changes from one form to another with the effect of numerous external influences.
What is Energy transformation?Energy transformation may be defined as the process through which energy can convert from one form to another. It also illustrates the migration of energy from one place to another due to physical factors.
According to the law of conservation of energy, in a closed system energy can neither be created nor destroyed. The total amount of energy remains the same before and after the process of transformation.
Therefore, the energy in a system always transforms from one form to another without any significant loss or addition.
To learn more about Energy transformations, refer to the link:
https://brainly.com/question/16917873
#SPJ2
A charge Q creates an electric field. At a distance of 10 cm, the electric field strength
is 30 N/C. What is the electric field strength at a distance of 20 cm? NO LINKS.
1) 7.5 N/C
2) 15 N/C
3) 60 N/C
4) 120 N/C
Answer:
simltinoues divide two eqn El÷E2 Kq\ r^2\kq \2r^2 then you get it 7.5 N\c the answer is A
A powerful motorcycle can produce an acceleration of 3.00 m/s2 while traveling at 106.0 km/h. At that speed, the forces resisting motion, including friction and air resistance, total 432.0 N. (Air resistance is analogous to air friction. It always opposes the motion of an object.) What is the magnitude of the force that motorcycle exerts backward on the ground to produce its acceleration if the mass of the motorcycle with rider is 241 kg
Answer:
"1155 N" is the appropriate solution.
Explanation:
Given:
Acceleration,
[tex]a=3 \ m/s^2[/tex]
Forces resisting motion,
[tex]F_f=432 \ N[/tex]
Mass,
[tex]m = 241 \ kg[/tex]
By using Newton's second law, we get
⇒ [tex]F-F_f=ma[/tex]
Or,
⇒ [tex]F=ma+F_f[/tex]
By putting the values, we get
⇒ [tex]=(3\times 241)+432[/tex]
⇒ [tex]=723+432[/tex]
⇒ [tex]=1155 \ N[/tex]
how much energy must be absorbed by 20.0 g of water to change its temperature from 95 degrees celsius to 125 degrees celsius
Answer:
I got 2508 J
Explanation:
q=mct
125-95
= 30 * 4.18 * 20
= 2508
20 POINTS:
Why does the initial hill of a roller coaster need to be steep?
Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity
Hope this helps! Good luck with future homework and exams!
A beam of light hits a mirror at an angel of 35 degrees. What is the angel that it bounces off at?
a. 55 degrees
b. 35 degrees
c. 90 degrees
Answer:
c
Explanation:
light refraction is a right angle
the answer is b :)
Samples of different materials, A and B, have the same mass, but the sample
of A is higher in density. Which statement could explain why this is so?
A. The particles that make up material B are more closely packed
together than the particles that make up material A.
B. The particles that make up material A have more mass than the
particles that make up material B.
C. The sample of material A has greater volume than the sample of
material B.
D. The particles that make up material B have more mass than the
particles that make up material A.
Answer:
Answer is letter B
Answer: THE CORRECT ANSWER IS : The partiles that make up material B are more closely packed together than the partiles that make up material A
Explanation: I TOOK THE TEST apex
write the application of gravitational force
Answer:
Applications of Gravitational Force:
Gravity keeps your feet on the ground. Gravity holds the air down. Gravity makes the Earth roughly spherical. Gravity keeps the Moon (and all those artificial satellites) orbiting around the Earth. Gravity keeps the Earth orbiting around the Sun and the Sun orbiting around the galactic centre. Gravity creates the water pressure that runs hydroelectric turbines at the bottom of dams. Gravity brings the rain back down after it evaporates into the atmosphere.Which is the preserved evidence of the activity of an organism?
Answer:
Fossils are the remains of an ancient organism or the traces of activity of such an organism. There are two types of fossils: body fossils and trace fossils. Body fossils include preserved remains of an organism (i.e. freezing, drying, petrification, permineralization, bacteria and algea).
Transformar las siguientes unidades al Sistema Internacional: 30 km/h ; 37 Dm ; 750 g ; 4x10-6 km2 ; 7500 cm ; 600000 cm2 ; 520700000 mm3 ; 3,4 años.
Answer:
a) 3.0 10⁴ m / s, b) 3.7 10¹ m, c) 0.750 kg, d) 4 10¹² m², e) 75 m, f) 60 m²
g) 5.207 10³ m², e) 4.847 10⁷ s
Explanation:
The international system (SI) of measurements has as fundamental units the meter for length, the second for time and kilogram for mass.
Let's reduce the different magnitudes to the SI system
a) 30 km / h (1000m / 1 km) (1 h / 3600 s) = 3.0 10⁴ m / s
b) 37 Dm (10 m / 1 Dm) = 3.7 10¹ m
c) 750 g (1 kg / 10,000 g) = 0.750 kg
d) 4 10⁶ km² (1000 m / 1km) ² = 4 10¹² m²
e) 7500 cm (1 m / 100 cm) = 75 m
f) 600000 cm² (1m / 10² cm) ² = 60 m²
g) 520700000 mm³ (1 m / 10³ mm) ³ = 5.20700000 109/10 ^ 6
= 5.207 10³ m²
e) 3.4 years (l65 days / 1 yr) (24 h / 1 day) (3600 s / 1h) = 4.847 10⁷ s
why we need system of measurement
Answer:
Without the ability to measure, it would be difficult for scientists to conduct experiments or form theories. Not only is measurement important in science and the chemical industry, it is also essential in farming, engineering, construction, manufacturing, commerce, and numerous other occupations and activities.
Explanation:
Juan's mother drives 12.5 miles southwest to her favorite shopping mall. What is the velocity of her
automobile if she arrives at the mall in 7.25 minutes?
Answer:
v1= 12.5miles, t= -7.25m, a= 0
v= 1/2at^2
v= 1/2×
which one of the following is not a derived quantity a)speed b)velocity c)time d)force
Answer:
c) time
Explanation:
time is a fundamental quantity from which other quantities are derived
A magnetic compass is placed near an insulated copper wire. When the wire is connected to a battery and a current is created, the compass needle moves and changes its position. Which is the best explanation for the production of a force that causes the needle to move?
Explanation:
When the wire is connected to a battery, the compass needle moves and changes its position. This happens because the needle magnetizes the copper wire, thus, creating a force.
While the current in the wire produces a magnetic field and exerts a force on the needle. The insulation on the wire becomes energized and exerts a force on the needle. Hence, the compass needle moves and changes its position.