Answer:
Ganymede is the largest body
Explanation:
it is the satellite of jupiter
Light bulbs produce useful energy in the form of light and waste energy in the form of heat. What kind of light bulb would you use
to incubate eggs?
A. low-efficiency light bulbs, because they produce more light
B. low-efficiency light bulbs, because they produce more heat
C. high-efficiency light bulbs, because they produce more heat
D. high-efficiency light bulbs, because they produce more light
Answer:
C) high efficiency light bulbs, because they produce more heat
Light bulbs produce useful energy in the form of light and waste energy in the form of heat, the kind of light bulb would you use to incubate eggs are low-efficiency light bulbs, because they produce more heat, therefore the correct answer is option B.
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
The type of light bulb you would use to incubate eggs is a low-efficiency light bulb since they produce more heat; consequently, option B is the right response. Light bulbs produce useful energy in the form of light and waste energy in the form of heat.
To learn more about thermal energy here, refer to the link given below ;
brainly.com/question/3022807
#SPJ2
I need the answer to this question
Answer:
I don't see anything so you should repost
1- A soccer ball was kicked from the ground with an initial speed of 12m/s at an
angle 32° above the horizontal. What are the x and y positions of the ball
0.50s after it is kicked?
Answer:
Y = 0.5 × 6.36 m/s = 3.18 meters
X = 0.5 × 10.18 m/s = 5.09 meters
Explanation:
X and Y components:
Y = 6.36 m/s
X = 10.18 m/s
Position after 0.5 seconds:
Y = 0.5 × 6.36 m/s = 3.18 meters
X = 0.5 × 10.18 m/s = 5.09 meters
The x and y positions of the ball 0.50s after it is kicked are 5.09 meter and 1.95 meter respectively.
What is velocity?
The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
Given parameters:
Initial speed of the soccer ball at an angle 32° above the horizontal is: u = 12m/s.
Time interval: t = 0.50 second.
Now, x component of initial velocity = u cosθ = 12 × cos 32° m/s = 10.17 m/s.
y component of initial velocity = u sinθ = 12 × sin32° =6.36 m/s.
Hence,
after 0.50 s, x-position of the ball = u cosθ t
= 10.17 × 0.50 meter
= 5.09 meter.
after 0.50 s, y-position of the ball = u sinθ t -gt²/2
= 6.36 × 0.50 - (9.8×0.50²/2) meter
= 1.95 meter.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ2
Carrie is driving a car. Which factors determine the kinetic energy of her car
at this point
Answer:
The two main factors that affect kinetic energy are mass and speed.
Explanation:
Kinetic energy is the energy that is caused by the motion. The kinetic energy of an object is the energy or force that the object has due to its motion. Your moving vehicle has kinetic energy; as you increase your vehicle's speed, your vehicle's kinetic energy increases.
Have a great day! :D
8. An airplane of mass 8500 kg dives has an altitude of 15,000 m. It then dives steeply to an
altitude of 11,000 m. What was the change in potential energy?
Answer:
333.5 MJ
Explanation:
ΔV = m·g·Δh
= 8500 · 9.81 · (15000-11000)
= 8500 · 9.81 · 4000
= 333 540 000
≈ 333.5 ·10⁶J = 333.5 MJ
The change in potential energy is 333.5 MJ
What is Potential Energy?
Potential energy is defined as the energy possessed by an object because of its position relative to other objects, tension within itself, its electric charge, or other factors. Any object that is raised above its rest position has energy stored in it, so it is called potential energy because it has the potential to do work when released.
It can be expressed as:
P.E.= mgh
where, m is the mass of an object measured in grams 'g'
g is the acceleration due to gravity which is [tex]9.8 m/s^2[/tex]
h is the height measured in meter 'm'
Here,
the given information is
m= 8500kg
Δh= [tex]h_2 - h_1[/tex] = 15000-11000 = 4,000m
So, P.E. = 850 x 9.8 x 4000 = 333 540 000= 333.5 ·10⁶J = 333.5 MJ
Thus, the change in potential energy is 333.5 MJ
Learn more about Potential energy, here:
https://brainly.com/question/24284560
#SPJ2
SOMEONE HELP! If I don't get this done i will fail, I have been trying for hours.
p.s. both questions have no answer choices.
1. If a baseball has a mass of 0.075kg and is traveling with an acceleration of 25 m/s2. What is the force that the baseball will hit the bat?
````````````````````````````````````````
2. Given the force diagram of the basketball, what can you tell about the basketball motion? (Diagram below)
Thanks in advance!!
Answer:
1. The baseball will hit the bat at a force of 1.875 Newtons (N)
2. The basketball is being pushed to roll to the right of its original position with an applied rightward force. There is a force of friction to the left, a normal force of the floor acting upwards on the ball, and a gravity force of the Earth acting downwards on the ball.
Explanation:
1. To calculate force, you just have to multiply mass (m) and acceleration (a). F = m * a --> F = 0.075kg * 25 m/s^2 = 1.875 N.
2. Use your knowledge of different types of forces and free-body diagrams to come to this conclusion.
20 cm long 10 cm wide and 5 cm thick as a mass of 500 g determine the greatest pressure that can be exerted by block on the flat surface?
100000 Pascal
Explanation:
pressure= force/area
Max pressure= force/min area
so f=5
min area= 5×10^-5
5÷5*10^-5 = 100000pascal
A spring has a length of 0.200 m when a 0.300-kg mass hangs from it, and a length of 0.750 m when a 1.95-kg mass hangs from it. (a) What is the force constant of the spring
Answer:
Explanation:
The change in force = 9.81(1.95 - 0.300) = 16.2 N
The change in length is 0.750 - 0.200 = 0.550 m
K = ΔF/Δx = 16.2/0.550 = 29.4 N/m
A patient comes to an outpatient laboratory for a physician-ordered fasting test. The patient indicates that he forgot that the test was to be fasting and ate a candy bar 2 hours ago. The patient insists that you should draw the test because he cannot come back at another time. What should you do?
The patient eating a candy bar instead of fasting for the test should be told
that the test results will be wrong and he may receive a wrong diagnosis.
The medical practitioners told him to fast when coming for a reason and he
forgetting and eating something means the objective for the test may have
been defeated.
This is why it's best to explain to him about the consequences of his actions
which is likely getting a wrong result and diagnosis.
Rad more on https://brainly.com/question/19622125
Question below...............
Answer:
friction force
Explanation:
force of friction is opposite to the force applied it resist the motion
knives, axe ,blades and nails are examples of
knives, axe ,blades and nails are examples of potential energy
or sharp objects
Figure 1 shows that the two vectors in different direction respectively. Determine the resultant for the two vectors
Answer:
15-45/2 = -7.5 downwards
Explanation:
cos(60) x 45 = z
z = 45/2
sin (30) x 70 = y
y = 15
15-45/ 2 = -7.5 downwards
does gravity cause a change in an objects movement
Answer:
yes
Explanation:
because gravity moves things
How much force is required to raise a 0.2 kg mass?
Answer:
1.96 N
Explanation:
⇒This is your full answer
what were your preparetion before going the different physical fitness test?
Answer:
Avoid heavy strenuous exercise for the 24 hours prior to testing. Do not exercise at all on the day of testing to ensure you are well rested. Wear appropriate clothing for the conditions (e.g. shorts/track pants and t-shirt/singlet/sports top) and non-slip athletic footwear with laces securely fastened
The coefficient of kinetic friction for a 22 kg bobsled on a track is 0.10. What force is required to push it down a 5.0 degree incline and achieve a speed of 62 km/h at the end of 75 m
Hi there!
We must begin by converting km/h to m/s using dimensional analysis:
[tex]\frac{62km}{1hr} * \frac{1hr}{3600sec}*\frac{1000m}{1km} = 17.22 m/s[/tex]
Now, we can use the kinematic equation below to find the required acceleration:
vf² = vi² + 2ad
We can assume the object starts from rest, so:
vf² = 2ad
(17.22)²/(2 · 75) = a
a = 1.978 m/s²
Now, we can begin looking at forces.
For an object moving down a ramp experiencing friction and an applied force, we have the forces:
Fκ = μMgcosθ = Force due to kinetic friction
Mgsinθ = Force due to gravity
A = Applied Force
We can write out the summation. Let down the incline be positive.
ΣF = A + Mgsinθ - μMgcosθ
Or:
ma = A + Mgsinθ - μMgcosθ
We can plug in the given values:
22(1.978) = A + 22(9.8sin(5)) - 0.10(22 · 9.8cos(5))
A = 46.203 N
PLEASE HELP I NEED TO PASS THIS CLASS
Answer:
I think that the answer is 4.318 as a=f/p
which statement is true about heat and light energy
Answer:
statements?
Explanation:
A 12.0 kg box resting on a horizontal, frictionless surface is attached to a 5.00 kg weight by a thin, light wire that passes over a frictionless pulley (Figure 1). The pulley has the shape of a uniform solid disk of mass 2.60 kg and diameter 0.500 m. A) After the system is released, find the tension in the horizontal segment of the wire. B) After the system is released, find the tension in the vertical segment of the wire. C) After the system is released, find the x-component of the acceleration of the box. D) After the system is released, find the x- and y-components of the force that the axle exerts on the pulley.
Answer:
Explanation:
Assuming x direction is horizontal any y direction is vertical
As the moment of inertia of the pulley is I = (½)mR²
The pulley mass will appear as ½ its actual mass in the system.
F = ma
5.00(9.81) = (5.00 + 2.60/2 + 12.0)a
a = 49.05 / 18.3
a = 2.6803278...
a = 2.68 m/s²
A) T = 12.0(2.68) = 32.16... = 32.2 N
B) T = 5.00(9.81 - 2.68) = 35.65 = 35.7 N
C) aₓ = 2.68 m/s²
D) Fx = 32.2 N
Fy = 35.7 + 2.60(9.81) = 61.2 N
A)The tension in the horizontal segment of the wire will be 32.2 N
B)The tension in the vertical segment of the wire will be 35.7 N
What is acceleration?Acceleration is defined as the rate of change of the velocity of the body. Its unit is m/sec².It is a vector quantity. It requires both magnitudes as well as direction to define.
The given data in the problem is;
m is the mass box resting on a horizontal =12.0 kg
the uniform solid disk of mass of 2.60 kg
d is the diameter = 0.500 m.
A)The tension in the horizontal segment of the wire will be 32.2 N
The acceleration is found as;
[tex]\rm F = ma \\\\ a= \frac{49.05}{18.3} \\\\ \rm a= 2.68 \ m/sec^2[/tex]
The tension in the horizontal segment of the wire is found as;
T=ma
T= 12.0 ×2.68
T=32.2 N
Hence the tension in the horizontal segment of the wire will be 32.2 N
B)The tension in the vertical segment of the wire will be 35.7 N
T=m(g-a )
T= 5.00 × (9.8-2.68)
T=35.7 N
Hence the tension in the vertical segment of the wire will be 35.7 N
C) the x-component of the acceleration of the box. will be 2.68 m/s².
aₓ = 2.68 m/s²
D)The x- and y-components of the force that the axle exerts on the pulley will be 32.2 and 61.2 N respectively.
Fx = 32.2 N
Fy = 35.7 + 2.60(9.81) = 61.2 N
Hence the x- and y-components of the force that the axle exerts on the pulley will be 32.2 and 61.2 N respectively.
To learn more about acceleration refer to the link;
https://brainly.com/question/969842
2. Conner flips a coin up in the air (to determine if he or his sister needs to do the dishes) at an upward velocity of 4.00 m/s. He fails to catch it on the way down and it falls down an additional 1.6 m to the floor. Calculate the maximum height and maximum magnitude (could be positive or negative) velocity of the coin.
Answer:
5.6
Explanation:
Not so sure
Which of the following methods of pest control used in IPM systems is effective because of the increase in biological diversity it provides? timed crop planting O weed suppression composted soil amendments deep tilling soil
Answer:
Decline in soil health is a serious worldwide problem that decreases complexity and stability of agricultural ecosystems, commonly making them more prone to outbreaks of herbivorous insect pests. Potato (Solanum tuberosum L., Solanaceae) and onion (Allium cepa L., Amaryllidaceae) production is currently characterized by high soil disturbance and heavy reliance on synthetic inputs, including insecticides. Evidence suggests that adopting soil conservation techniques often (but not always) increases mortality and decreases reproductive output for the major insect pests of these important vegetable crops. Known mechanisms responsible for such an effect include increases in density and activity of natural enemy populations, enhanced plant defenses, and modified physical characteristics of respective agricultural habitats. However, most research efforts focused on mulches and organic soil amendments, with additional research needed on elucidating effects and their mechanisms for conservation tillage, cover crops, and arbuscular mycorrhizae.
Introduction
Soil erosion is a serious problem worldwide (Amundson et al., 2015). Although it is often overshadowed in public discourse by other concerns, such as climate change and invasive species, soil deterioration receives considerable attention from the scientific community (Montgomery, 2007; Borrelli et al., 2017; Berhe et al., 2018). In addition to the loss of agricultural productivity, soil erosion has been linked to increased emissions of greenhouse gases and reduced water quality (Amundson et al., 2015; Berhe et al., 2018). Global soil erosion is forecasted to increase in the near future because of cropland expansion, especially in the least economically developed areas (Borrelli et al., 2017).
How long do elephants live?
How do mechanical waves compare with electromagnetic waves?
Answer:
Main Difference Between Mechanical and Electromagnetic waves
A wave is composed of some kind of disturbance that propagates. We can classify waves into many different types based on their properties. One of the properties of the waves depends on whether they need a medium to propagate or not. The primary difference between electromagnetic and mechanical waves is also based on this property. Mechanical waves need a medium, while electromagnetic waves do not need a medium to propagate. Electromagnetic waves can travel through a vacuum. The other differences between mechanical and electromagnetic waves are given below:
Electromagnetic waves can travel through a vacuum, that is an empty space, whereas mechanical waves cannot. They need a medium to travel such as water or air. Ripples in a pond are an example of mechanical waves whereas electromagnetic waves include light and radio signals, which can travel through the vacuum of space.
Mechanical waves can be classed as elastic waves because their transmission depends on the medium's (water, air etc.) elastic properties.
Electromagnetic waves are caused because of the varying magnetic and electric fields. They are produced by the vibration of the charged particles.
Because of these differences, the speed of each type of wave varies significantly. Electromagnetic waves travel at the speed of light but mechanical waves are far slower.
Have a wonderful day!
~Lillith of brainly~
QUESTION 5 When an instrument is sounded together with a turning fork of frequency 260Hz , 2 beats are heard. When the same instrument is sounded with a fork of frequency 256H2, , 6 beats are heard. Find the frequency of the instrument .
Answer:
Explanation:
4126h2.
An airplane accelerates from a speed of 33 m/s at the constant rate of 3.0 m/s2 over a distance of 500 m. What the final velocity?
Answer:
Explanation:
v² = u² + 2as
v² = 33² + 2(3.0)(500)
v² = 4089
v = 63.9452...
v = 64 m/s
A person is pushing a box with 5 N to the right while another person pushes with 10 N to the left, what is the net force on the box?
Answer:
Fnet = 5 Newton
Explanation:
Fnet = 10 N - 5 N
Fnet = 5 N
9
are things that you can achieve quickly.
O A.
Dreams
OB.
Long-term goals
O c.
Short-term goals
OD.
Plans
Answer:
d
Explanation:
A dreams
.......wkkwkwkwkwkwnwnsksk
Answer:
C. short term goal
Explanation:
took a midterm quiz on canvas, Hope this helps <3
Heat is transferred from molecules with more kinetic energy to molecules with _________kinetic energy.
Answer:
low
Explanation:
the higher the kinetic energy, the More the vibration of molecules, thus heat is more on the side with highly vibrating molecules
Danny is competing in the high jump. When he is in the air, his body has _______ energy due to its height, and it has _______ energy due to its motion.
Answer:
Gravitational potential energy
kinetic energy
A cylindrical rod formed from silicon is 16.8 cm long and has a mass of 2.17 kg. The density of silicon is 2.33 g/cm3 . What is the diameter of the cylinder
Answer:
We are given the length, the mass and the density of the cylinder. First let us calculate for the volume by dividing the mass by the density.
volume = mass /density
where mass = 2.17 kg = 2170 g, therefore:
volume = 2170 g / (2.33 g/cm^3)
volume = 931.33 cm^3
We know that the volume of a cylinder has the formula:
volume = π r^2 h
since h = 16.8 cm, therefore calculating for radius:
931.33 cm^3 = π r^2 (16.8 cm)
r^2 = 17.646 cm^2
r = 4.2 cm
Hence the diameter (d) is:
d = 2 r
d = 8.4 cm
Explanation:
The diameter of the cylindrical rod is approximately 0.382 cm.
To find the diameter of the cylindrical rod, we can use the formula for the volume of a cylinder and then solve for the diameter.
The formula for the volume of a cylinder is:
V = π[tex]r^{2}[/tex]h,
where V is the volume, r is the radius, and h is the height (or length) of the cylinder.
In this case, we know the length of the cylinder (h) is 16.8 cm. We need to find the radius (r) in order to calculate the diameter.
The mass of the cylinder can be related to its volume and density using the formula:
m = ρV,
where m is the mass, ρ is the density, and V is the volume.
Rearranging this formula, we can solve for V:
V = m / ρ.
Now we have two equations:
V = π[tex]r^{2}[/tex]h,
V = m / ρ.
Setting these two equations equal to each other, we can solve for r:
π[tex]r^{2}[/tex]h = m / ρ.
Substituting the given values:
π[tex]r^{2}[/tex] * 16.8 cm = 2.17 kg / (2.33 g/[tex]cm^3[/tex]).
Let's solve this equation for r:
[tex]r^{2}[/tex] = (2.17 kg / (2.33 g/[tex]cm^3[/tex])) / (π * 16.8 cm).
[tex]r^{2}[/tex] ≈ 0.036775 [tex]cm^2[/tex].
Taking the square root of both sides:
r ≈ 0.191 cm.
Finally, we can find the diameter (d) by multiplying the radius by 2:
d ≈ 2 * 0.191 cm.
d ≈ 0.382 cm.
Therefore, the diameter of the cylindrical rod is approximately 0.382 cm.
To know more about diameter here
https://brainly.com/question/33294089
#SPJ2