Number 8 question need help

Answer:

The traditional electrolyte for aluminium electrolysis is based on molten cryolite (Na3AlF6), acting as solvent for the raw material, alumina (Al2O3).Metals are found in ores combined with other elements. Electrolysis can be used to extract a more reactive metal from the ore.

Aluminum can and is used as both anodes and cathodes in electrochemical cells, but there are some peculiarities to using it as an anode in aqueous solutions. As you note, aluminum forms a passivating oxide layer quite readily, even by exposure to atmosphere. In an aqueous solution, if the potential is high enough, OH− and O2− are generated at the anode, which can then react with the aluminum to produce aluminum oxide. Al^3+ can also be generated directly. The electric field will draw the anions through the growing aluminum oxide layer towards the aluminum surface and the Al^3+ towards the solution, making the oxide layer grow both away from the electrode surface and into the surface of the electrode. In this way, coatings thicker than the normal passivation in air can be produced. However, aluminum oxide is a good electrical insulator, thus if a dense non-porous layer is grown, it will become impossible to pass current through it and growth will stop, leaving a relatively thin oxide layer (this is how the dielectric layers in electrolytic capacitors are made). This is the normal behaviour in aqueous solutions at near-neutral pH (5–7).

However, if a thick aluminum oxide layer is desired (e.g. to produce coatings on aluminum parts for dying or durability), maintaining porosity is necessary to avoid completely blocking access to the surface. One technique that is commonly used is using a low pH solution, which tends to redissolve some of the oxide and neutralize some of the formed OH−, leaving pores in the oxide layer through which the ions can travel and continue to react. These pores also give a good structure to retain dyes or lubricants, but generally need to be sealed after to protect against corrosion.

To determine the most similar element identify the atomic number of the element and other properties such as state of the matter, color, conductivity, or boiling point.

In the period table, elements are arranged based on two main factors:

Now, if you know both the atomic number or the properties you can determine which element is the most similar to the element that you have.

Note: This question is incomplete because there is no information bout the element "oregano"; due to this, I answered it based on general knowledge.

Learn more in: https://brainly.com/question/7373020

Bromine needs to gain one more electron to have a noble gas configuration or 8 valence electrons, & potassium needs to lose one so they make a transference of electrons in an ionic bond.

Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, or between two atoms with sharply different electronegativities, and is the primary interaction occurring in ionic compounds.

Ionic bonding results in compounds known as ionic, or electrovalent, compounds, which are best exemplified by the compounds formed between nonmetals and the alkali and alkaline-earth metals.

The charge of a cation or anion is denoted as a superscript after the formula of the ion. A + sign denotes a positive charge resulting from loss of electrons. A - sign denotes a negative charge resulting from gain of electrons.

Learn more about ionic bonds:

https://brainly.com/question/11527546

#SPJ2

Answer:

First one answer is physical and other remaning chemical

Answer:

Hydrogen is a colorless, tasteless, and odorless gas.  

physical

--------------------------------------------------------------------------------------------------------------

Hydrogen is very combustible in the presence of oxygen.  

chemical

--------------------------------------------------------------------------------------------------------------

Hydrogen is very reactive with most elements.  

chemical

--------------------------------------------------------------------------------------------------------------

Hydrogen is the least dense of all elements.  

physical

Write a Balanced Equation for the decomposition

CaCO₃     →     CaO    +    CO₂

Find Moles of CO₂ Produced

Since the mole ratio of  CaCO₃  to CO₂ is 1 to 1,

the moles of CaCO₃ = moles of CO₂

moles of CaCO₃   = mass ÷ molar mass

                             = 300 g ÷ 100.087 g/mol

                             = 2.997 moles

∴ moles of CO₂ = 2.997 moles

Determine Mass of CO₂

Mass = moles × molar mass

         = 2.997 mol × 44.01 g/mol

         = 131.9 g

One:

plants make their own food through a process known as photosynthesis

Two:

Photosynthesis is a process used by plants and other organisms to convert light energy into chemical energy and stored in the form of starch which can be used later

Three:

Photosynthesis converts carbon dioxide and water into oxygen and glucose. Glucose is used as food by the plant and oxygen is a by-product.

Answer:

1. b

2. a

3. b

Explanation:

Answer:

3  1-butene, Z-2-butene, and E-2-butene.

Explanation:

Since 2-butene exists as two stereoisomers, three products are possible from the reaction of potassium ethoxide with 2-bromobutane. The products are, of course, 1-butene, Z-2-butene, and E-2-butene.

Answer:

Freezing and condensation

Explanation:

Because they are exothermic, they release energy

Answer:

3d

Explanation:

Answer:

Density is a measure of how heavy something is compared to its size.

If an object is more dense than water it will sink when placed in water, and if it is less dense than water it will float.

Density is a characteristic property of a substance and doesn’t depend on the amount of substance.

Explanation:

If you compared the weight of wood and an equal amount, or volume, of water the sample of wood would weigh less than the sample of water. This means that wood is less dense than water. Since wood is less dense than water, wood floats in water, no matter how big or small the piece of wood is.

A student might want to know why a boat made out of steel can float when steel is more dense than water. This is not an easy question and requires a different approach than what students have seen so far. We do not necessarily recommend the following explanation for 5th graders but here is the idea:

An object floats when it displaces a volume of water that has a mass equal to the mass of the object. So if a material like steel is shaped into a boat and made larger and larger, it will displace more and more water. When it is large enough to displace a volume of water that has a mass equal to the mass of the boat, the boat will float.

Answer:

B: Microscopic organisms are not made of cells

Explanation:

Answer:

anyone you just have to know how

Explanation:

Answer:

11419 J/g/ 11.419 KJ/g

Explanation:

H=MCQ

H=225×2.03×(-15-10)

H=225×2.03(25) Note; negative sign is of no use

H=11419J/g

Answer:

due to the overlaying layers of strata (layers of earth) an high pressure is created at the core. due to this it behaves like an solid rether than being a liquid... the lower mantle is not solid because in this case the overlaying strata doesn't produce that much pressure on it..

Explanation:

brainliest plz

Answer:  

Find moles of Known Substance (NaCl)

Moles of NaCl = mass ÷ molar mass

                        =  114.25 g ÷ 58.44 g/mol

                        = 1.955 mol

Use Mole Ratio of Known to Unknown (NaCl : NaClO₃) to Determine Moles of Unknown

The mole ratio of NaCl to NaClO₃ is 2 to 2 or simply 1 to 1.

This means that for each mole of NaCl produced the same number of moles of NaClO₃ was decomposed.

∴ since moles of NaCl = 1.955 mol,

then moles of NaClO₃ = 1.955 mol

Find Mass of Unknown

Mass of NaClO₃ = moles × molar mass

                           = 1.955 mol × 106.44 g/mol

                           =  208.09 g

Determine the Moles of Known (O₂)

moles of O₂ = (volume × density) ÷ molar mass

                    = (68.30 L × 0.0828 g/L) ÷ 32 g/mol

                    = 0.177 mol

Use Mole Ratio of Known to Unknown (O₂ : NaClO₃) to Determine Moles of Unknown

Mole ratio of O₂ : NaClO₃ is 3 : 2. Therefore for each mole of oxygen produced, ²/₃ the moles of NaClO₃ is produced.

∴ if moles of O₂  =  0.177 mol

then moles of NaClO₃ =  0.177 mol × ²/₃

                                     = 0.118 mol

Find the Number of Particles of Unknown

Number of particles  = moles × Avogadro's Number

                                  = 0.118 mol × (6.022 × 10²³ particles/mol)

                                  =  7.11 × 10²² particles

Answer:

Decompositon

Explanation:

Sodium chlorate → Sodium Chloride + Oxygen

Sodium chlorate is reactant.

Sodium chloride + Oxygen is the product.

Definition : -

Decomposition reaction is a chemical reaction in which a single reactant breaks down to simpler products.

Answer:

Their speed = 69.9043 miles per hour

Their speed = 112.5 kilometers per hour

Explanation:

Answer:Accuracy Thermometers used to measure the temperature of food need to be accurate to +/-2°F or +/-1°C. Thermometers used to measure air temperature in food storage equipment need to be accurate to +/-3°F or +/- 1.5°C. A hanging thermometer in a walk-in cooler is an example.

Explanation:

Answer:

A

Explanation:

it's a because model is like the same thing as walking on a Runway but it's like a model in the medical field

Explanation:

desk I have a lot of work and I will send it in the one

Answer:the name is cc bc it 4920 and hehe i just want points thank you

Explanation: lol did wsiw skwks thanks for points

Answer:

Molecularity is the number of ions or molecules that take part in the rate determining step

Order of reaction is the number of molecules of reactant whose concentration changes during the chemical change

Answer:

14

Explanation:

Answer:

Octane

Explanation:

What is CH3CH2CH2CH2CH2CH2CH2CH3?

Octane - CH3CH2CH2CH2CH2CH2CH2CH3.

Explanation:

there are 8 atoms of hydrogen

Answer:

Elements in which the d-sublevel is being filled have the properties of metals

Elements in which the d-sublevel is being filled have the properties of;

transition metals.

In quantum theory the sublevel is an energy level. Now, the d-sublevel in atomic configuration has 5 orbitals and as such can contain a maximum of 10 electrons.

Now, this d-sublevel is used primarily by elements called "transition elements" as they are also called d-block elements.

However, these transition elements are also called transition metals because all the transition elements possess properties of metals generally.

In conclusion, elements in which the d-sublevel is being filled have the properties of transition metals.

Read more at; https://brainly.com/question/3948476

Answer:

1 is protons and neutrons

2 is electrons and protons

3 Is protons

Answer:

They will form a hydrogen bond with the oxygen atom and the polar hydrogen atom.

Between a water molecule and an ethanol molecule, a hydrogen bond can occur between a lone pair of electrons on the Oxygen and  a Hydrogen in water and the Polar hydrogen of an ethanol molecule.

Hydrogen bonding is an interaction involving a hydrogen atom located between a pair of other atoms having a high affinity for electrons.

It is a bond is weaker than an ionic bond or covalent bond but stronger than van der Waals forces.

In the given question, They will form a hydrogen bond with the oxygen atom and the polar hydrogen atom.

Learn more about hydrogen bond here ;

https://brainly.com/question/10904296

#SPJ5