Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
Who else got stuck on a question and is NOT ready for test return at 2? its 1:58 AAAAAAA
A mover uses a pulley to lift a 2500N piano up to a second story balcony. The mover pauses to wipe sweat from his forehead while holding the rope tight in one hand. Since the piano is not moving at this time, what is the tension force in the rope while the piano is dangling still in the air?
Answer:
2500 N
Explanation:
Tension force may be defined as the force which is transmitted along a cable, rope, or through a string which is stretchable and is puled tight by the forces acting from the opposite sides. It is directed along the length of the string or the rope.
In the context, a pulley string holds a 2500 N piano that is used to lift it to second story balcony. When the piano is held stationary by the mover, the tension force acting on the rope is the weight force or the gravitational force that acts on the piano which is 2500 N. The tension force balances the the weight force of the piano when it is not moving.
A car decelerates uniformly from 54 m/s to 38 m/s in 8.0 seconds. How far does it travel dunng this time?
Answer:
368m
Explanation:
dx=vt
54+38/2=46
46*8=368m
A 50 Kg football player is standing still when he experiences an inelastic collision with a 150 Kg football player who is traveling at 10 m/s. What is the velocity of the player immediately after the collision?
Answer:
V = 7.5 m/s
Explanation:
Given that,
Mass of player 1, m₁ = 50 kg
Mass of player 2, m₂ = 150 kg
50 kg player stands still and 150 kg player is traveling at 10 m/s
We need to find the velocity of the player immediately after the collision. As the inelastic collision occurs. The linear momentum will remain conserved. After the collision, let they move with a constant velocity say V.So,
[tex]m_1u_1+m_2u_2=(m_1+m_2)V\\\\V=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}\\\\=\dfrac{150\times 10}{(50+150)}\\\\=7.5\ m/s[/tex]
So, the velocity of the player immediately after the collision is 7.5 m/s.
What is thermodynamics?
the movement of energy
the classification of energy
the way energy changes
the movement of heat
Answer:
The movement of energy
Explanation:
Answer:
the movement of energy
how do you know the pole on the left is the south pole and the pole on the right is the north pole?
Answer:
Left is deciamled to the right [tex]x_{123}[/tex]
Explanation:
If you can run at a speed of 30 miles per hour and run a distance of 15
miles, how long did it take you to run that distance?
Answer:
30 mins
Explanation:
speee=distance/time
300m/h=15m/time
time=15miles/300miles/hous=1/2 hours=30 mins
Answer:
30 minutes.
Explanation:
If it takes you an hour to run 30 miles but you only need to run 15 miles then you split that hour in half, which results in half an hour or 30 minutes.
which option lists materials in order by their ability to allow the flow of electrons, from most easily to least easily?
A. Conductor, semiconductor, insulator
B. Semiconductor, insulator, conductor
C. Insulator, semiconductor, conductor
D. Semiconductor, conductor, insulator
Help me pls!
Answer: Conductor, semiconductor, insulator
Explanation:
Just did the quiz
The correct option is option A.
The descending order in which electrons flow easily is:
Conductor, semiconductor, insulator
Conductivity and flow of electrons:The correct order for materials by their ability to allow the flow of electrons, from most easily to least easily is Conductor, semiconductor, insulator.
Conductors are generally metals, they have plenty of free electrons due to which the electron flow is easy. Also, the conduction band and valance band in a conductor overlap, so they can conduct at room temperature.
In the case of semiconductors, the band gap between the conduction band and valance band is almost 1eV, so a little energy is enough to make the flow of electrons possible
Whereas, in insulators, the band gap is quite high and electrons can not jump from the conduction band to the valence band due to which the flow of electrons is not possible.
Learn more about band gap:
https://brainly.com/question/14124478?referrer=searchResults
Can someone help please I will give brainliest
Please help
An electric energy distributor supplies each household 220
volts of voltage and 60 A of current. Applying your knowledge on Ohm's Law, in what way your appliances be used at home to maintain a safe amount of current?
Answer:
Hence appliance but be connected to a 3.67 ohms load to maintain a safe amount of the current
Explanation:
According to Ohm's law, V = IR
V is the potential difference = 220volts
I is the current = 60 A
R is the resistance (Load)
Calculating the load R
R = V/I
R = 220/60
R = 3.67 ohms
Hence appliance but be connected to a 3.67 ohms load to maintain a safe amount of the current
A box at rest is in a state of equilibrium half way up on a ramp. The ramp has an incline of 42° . What is the force of static friction acting on the box if box has a gravitational force of 112.1 N ?
Answer:
Explanation:
The force of static friction acting on the box is the frictional force;
Frictional force Ff = Wsin theta (force acting along the ramp)
W is the gravitational force known as the weight
Ff = 112.1sin42°
Ff = 112.1(0.6691)
Ff = 75.00N
Hence he force of static friction acting on the box if box has a gravitational force of 112.1 N id 75.00N
Answer:
75N i did test
Explanation:
A stretched spring attached to two fixed points is compressed on one end and released, as shown. The resulting wave travels back and forth between the two fixed ends of the spring until it comes to a stop. This is an example of _____ .
a Transverse wave
b
longitudinal wave
c
surface wave
d
electromagnetic wave
Answer:
B. Longitudinal wave
Explanation:
It's the only option that makes sense. Hope this helped :)
true or false? drag forces decrease when the density of a fluid increases
Answer:
Drag increases with the density of the fluid (ρ). More density means more mass, which means more inertia, which means more resistance to getting out of the way. The two quantities are directly proportional.
A 55 kg boy running at 2.0 m/s jumps onto a 2.0 kg skateboard. Calculate the final velocity of the boy and the skateboard.
Answer:
The final velocity of the boy and the skateboard is 1.93 m/s.
Explanation:
We can find the final velocity of the boy and the skateboard by conservation of linear momentum:
[tex] P_{1} = P_{2} [/tex]
[tex] m_{b}v_{i_{b}} + m_{s}v_{i_{s}} = m_{b}v_{f_{b}} + m_{s}v_{f_{s}} [/tex] (1)
Where:
[tex]m_{b}[/tex]: is the boy's mass = 55 kg
[tex]m_{s}[/tex]: is the skateboard's mass = 2.0 kg
[tex]v_{i_{b}}[/tex]: is the initial speed of the boy = 2.0 m/s
[tex]v_{i_{s}}[/tex]: is the initial speed of the skateboard = 0
[tex]v_{f_{b}}[/tex]: is the final speed of the boy =?
[tex]v_{f_{s}}[/tex]: is the final speed of the skateboard =?
Since the boy and the skateboard will have the same final velocity by entering the above values into equation (1) we have:
[tex] 55 kg*2.0 m/s + 0 = v_{f}(55 kg + 2.0 kg) [/tex]
[tex] v_{f} = 1.93 m/s [/tex]
Therefore, the final velocity of the boy and the skateboard is 1.93 m/s.
I hope it helps you!
The final velocity of the boy and the skateboard is 1.93m/s
According to the law of conservation of momentum, the momentum of the bodies before the collision is equal to the momentum of the bodies after the collision.
Mathematically, [tex]m_1u_1+m_2u_2=(m_1+m_2)v[/tex]
[tex]m_1 \ and \ m_2[/tex] are the masses of the object
[tex]u_1 \ and \ u_2[/tex] are the velocities of the object
v is the final velocity
Given the following parameters
m₁ = 55kg
u₁ = 2.0m/s
m₂ = 2.0kg
u₂ = 0m/s
Required
Final velocity "v"
Substitute the given parameters into the formula to have:
[tex]55(2)+2(0)=(55+2)v\\110=57v\\v=\frac{110}{57}\\v= 1.93m/s[/tex]
Hence the final velocity of the boy and the skateboard is 1.93m/s
Learn more here: https://brainly.com/question/22257327
30 POINTS!!!! If you increase the frequency, what happens to the velocity of the wave?
In answering this question, describe how you determined the velocity as well as the result you arrived at. Then, provide a scientific explanation for this result, based on your knowledge of waves.
Answer:
As frequency increases, wavelength decreases. Frequency and wavelength are inversely proportional. This basically means that when the wavelength is increased, the frequency decreases and vice versa.
Explanation:
A wave's velocity is independent of its intensity and equal to the product of its wavelength and frequency (number of vibrations per second) so, velocity remains constant if you increase the frequency.
What is Frequency?Frequency is defined as the no of waves that are passing from the point in respect to a given time. Frequency can be measured in Hertz. Humans, whose capacity to hear is normal, can hear between the frequency of 20 Hertz to 20000 Hertz.
In mathematical form, the frequency is the factor of one divided by the time period. The number of cycles or vibrations a body in periodic motion makes in one unit of time.
Wavelength reduces as frequency rises. The relationship between frequency and wavelength is inverse. In essence, this means that the frequency reduces as the wavelength increases and vice versa.
Frequency ∝ 1 / Wavelength
Velocity = Frequency × Wavelength
Thus, it remains constant.
To know more about frequency:
https://brainly.com/question/14316711
#SPJ2
The density of an object is dependent upon the object’s mass and ---
Answer:Volume
Explanation:
Density = mass/ Volume
Answer:
Volume
Explanation:
You want to push a 71-kg box up a 16° ramp. The coefficient of kinetic friction between the ramp and the box is 0.23. With what magnitude force parallel to the ramp should you push on the box so that it moves up the ramp at a constant speed?
Answer:
345.60N
Explanation:
The magnitude of the force parallel to the ramp that will push the box up the ramp are the frictional force(Ff) and the moving force Fm
Total force = Ff + Fm
Ff = ηR
Ff = ηmgcosθ
Fm = Wsinθ
Fm = mgsinθ
Total force = ηmgcosθ + mgsinθ
Total force = mg(ηcosθ + sinθ)
Given
mass m = 71kg
acceleration due to gravity g = 9.8m/s²
angle of inclination θ = 16°
coefficient of friction η = 0.23
Substitute into the formula;
Total force = 71(9.8)(0.23cos16 + sin16)
Total force = 695.8(0.2211+0.2756)
Total force = 695.8(0.4967)
Total force = 345.60N
Hence the magnitude force parallel to the ramp that you should push on the box so that it moves up the ramp at a constant speed is 345.60N
100 points if u help me and get it right this needs to be done in 3 min hurry to get ur 100 points
Calculate the kinetic energy of a 50 kg cart moving at a speed of 6.9 m/s.
Answer:
35
Explanation:
c7z ya boiiiiiiiiiiiiiiiiii
What makes the yardstick test a direct measurement of reaction time?
A.
The further the yardstick falls, the slower the reaction time.
B.
Yardsticks have numerical markings for length.
C.
Yardsticks are designed to measure reaction time.
D.
all of the above
Please select the best answer from the choices provided.
A
B
C
D
Answer:
A. the further the yardsticks falls, the slower the reaction time.
Answer:
The further the yardstick falls, the slower the reaction time.
Explanation:
its A
The temp of the metal in a running car engine is 388 K. Find this temp in Celsius.
Answer:
115°c
Explanation:
°c=k-273
388-273=115
If you increase the frequency what happens to the distance between the waves (wavelength)?
The size of the waves stays the same
the distance increases (longer wavelength)
There is no way to tell.
the distance decreases (shorter wavelength)
Answer:
C)the distance decreases Shorter wavelength
Step by step Explanation:
A box is being pulled across a horizontal surface by a 20 N force to the right.
a. If the box moves at a constant velocity, what do you know about the forces acting on the object?
b. If the box moves at a constant velocity, how much force opposes the motion of the box?
c. If the box experiences a force of 15 N to the left, along with the 20 N force acting to the right, what is the net force on the box?
A) If the box moves at a constant velocity, what we know about the forces acting on the object is; the sum of the forces acting on the object must be zero.
B) If the box moves at a constant velocity, the force that opposes the motion of the box is; Frictional Force of -20 N
C) If the box experiences a force of 15 N to the left, along with the 20 N force acting to the right, the net force on the box is; F_net = 5 N
We are told that a box is being pulled across a horizontal surface by a 20N force to the right.
A) Newton's first law of motion states that an object will remain at rest or continue in motion unless an external force acts on it. This means that any object/body moving with constant velocity will have no net external force acting on it. Thus, the sum of the forces acting on the object must be zero. B) Since we are told that the box is moving at a constant velocity and that the sum of all forces must be zero. Then the force that will oppose the applied force of 20N to the right will be an equal but opposite force .In this case the opposing force will have to be the frictional force which will be -20 N to balance out the applied force.
C) We are told that a force of 15 N is acting to the left along with the 20 N force.Thus, the net force will be;
F_net = 20 - 15
F_net = 5 N
Read more at; https://brainly.com/question/20712983
A 2000 kg car is moving at 1.5 m/s. What is its kinetic energy?*
A. 0J
B. 3000J
C. 1500 J
D. 4500 J
E. 2250 J
The sixth grade teachers are planning a field trip. They want to divide the 192 students evenly on the four buses. How many students will ride each bus?
Answer:
48 students will ride on each bus.
Explanation:
192 students divided by 4 busses comes out to 48 students per bus.
Basically: 192/4=48
What is power??????????
Chemical reactions occur due to sharing or transferring of blank. Please help ASAP!!!!
Answer: valence electrons?
Explanation:
How much Tension force is required to pull a 1500 kg car (it is being towed) forward with an acceleration of 3 m/s^2 if the friction force on the towed car's tires is pulling backward with a force of 2500 N?
If the pull is done horizontally, then the net force on the car is
∑ F = T - f = (1500 kg) (3 m/s²)
where T is the magnitude of the tension in the towing cable, and f is the friction which points in the opposite direction. Then
T = f + (1500 kg) (3 m/s²)
T = 2500 N + 4500 N
T = 7000 N
2. The purpose of using ice on an injured area is... *
to increase blood flow.
O to hydrate an injury.
O to reduce blood flow.
O to dilate blood vessels.
Kayla is measuring how long it takes a ball to roll down a hill. The ball has a
starting velocity of 2.6 m/s. The ball rolls down the hill for 5.5 seconds, and
when it reaches the bottom, it has a velocity of 8.0 m/s. How far did the ball
roll during this time frame?
A) 44 meters
B) 14 meters
C) 29 meters
D) 58 meters