Answers
i think the answer is h if am wrong am sorry
Explanation:
Related Questions
There is a bell at the top of a tower that is 45 m high. The bell weighs 190 N. The bell has ____________ energy.
Answers
Answer:
The bell has 8,550 Joule energy.
Explanation:
Gravitational Potential Energy
Gravitational potential energy is the energy stored in an object because of its height in a gravitational field.
It can be calculated with the equation:
U=m.g.h
Where:
m = mass of the object
h = height
g = acceleration of gravity, or [tex]9.8 m/s^2[/tex]
Since the weight of an object of mass m can be calculated as:
W = m.g
The gravitational potential energy is:
U = W.h
The bell of weight W=190 N at the top of a tower is h=45 m high. Thus its energy is:
U = 190 N . 45 m
U = 8,550 Joule
The bell has 8,550 Joule energy.
Question 25
The drawings below show four objects that are acted upon by different forces The direction of the forces are represented by the arrows, and the units of the forces are in newtons (N) Based on Newton's law of
inertia, which object is moving at a steady speed, assuming that all four objects are moving on a frictionless surface?
Answers
Answer:
The one with equal forces on both sides, D is your answer
Explanation:
A, 5 and 10 No
B 13 and 8 no
C 5 and 8 no
D 6 and 6 YES
Object 4 have steady speed. Object 4 have same force on both the sides of object. Same force is applied on both the sides.
What is steady speed?Uniform or constant velocity describes a body's motion when there is no acceleration. A body's velocity is its rate of movement in a specific direction.
When running steadily, your exhaustion should be caused by the length of the run, not by your speed. A steady-state run pace, according to the McMillan Running website, is halfway between your current 30k and half-marathon pace. This speed should allow you to run for 25 to 75 minutes.
Therefore, Object 4 have steady speed. Object 4 have same force on both the sides of object. Same force is applied on both the sides.
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ2
____________ is an individual sport that helps develop your hand-eye coordination.
Table Tennis
Ice Skating
Swimming
Answers
Answer:
Answer option A) Table Tennis helps develop your hand-eye coordination.
Answer:
table tennis
Explanation:
A (10.0+A) g ice cube at -15.0oC is placed in (125 B) g of water at 48.0oC. Find the final temperature of the system when equilibrium is reached.
Specific heat of ice: 2.090 J/g K
Specific heat of water: 4.186 J/gK
Latent heat of fusion for water: 333 J/g
Answers
Answer: Final temperature is 34.15°C.
Explanation: When two objects have different temperature, they will exchange heat energy until there is no more net energy transfer between them. At that state, the objects are in thermal equilibrium.
So, when in equilibrium, the total heat flow must be zero, i.e.:
[tex]Q_{1}+Q_{2}=0[/tex]
In our case, there will be a change in state of ice into water, so total heat flow will be:
[tex]m_{1}c_{1}(T_{f}-T_{i})+m_{2}c_{2}(T_{f}-T_{i})+mL=0[/tex]
where
m₁ is mass of ice
m₂ is mass of water
c₁ is specific heat of ice
c₂ is specific heat of water
[tex]T_{f}[/tex] is final temperature
[tex]T_{i}[/tex] is initial temperature
L is latent heat fusion
Temperature is in Kelvin so the transformation from Celsius to Kelvin:
For ice:
T = -15 + 273 = 258K
For water:
T = 48 + 273 = 321K
Solving:
[tex]21(2.09)(T_{f}-258)+158(4.186)(T_{f}-321)+21(333)=0[/tex]
[tex]43.89T_{f}-11323.62+661.4T_{f}-212305.55+6993=0[/tex]
[tex]705.3T_{f}=216636.17[/tex]
[tex]T_{f}=[/tex] 307.15K
In Celsius:
[tex]T_{f}=[/tex] 34.15°C
Final temperature of the system when in equilibrium is 34.15°C
You throw a baseball (mass 0.145 kg) vertically upward. It leaves your hand moving at 12.0 m/s. Air resistance can be neglected.
A. At what height above your hand does the ball have half as much upward velocity?
B. At what height above your hand does the ball have half as much kinetic energy as when it left your hand?
Answers
Answer:
Explanation:
A ) initial velocity u = 12 m /s
final velocity v = 6 m /s
height = h
acceleration = - g = - 9.8 m /s²
v² = u² - 2gh
6² = 12² - 2 x 9.8 x h
h = 5.51 m
B )
Let the final velocity when energy becomes half be V at height H
kinetic energy at height h = 1/2 m V²
Given ,
.5 x 1 / 2 m x 12² = 1/2 m x V²
V² = 12² / 2
V = 8.486 m /s
V² = u² - 2 gH
8.486² = 12² - 2 x 9.8 x H
H = 3.67 m .
The coulombic force between two ions is reduced to ______ of its original strength when the distance between them is quadrupled.
Answers
Answer:
1/16Explanation:
According to the coulombs law, the force existing vetween the ions is expressed as;
F = kQq/r² .... 1
Q and q are the ions
r is the distance between the ions
If the distance between the ion is quadrupled, then;
F2 = kQq/(4r)²
F2 = kQq/16r² ... 2
Divide equation 2 by 1;
F2/F = kQq/16r² ÷ kQq/r²
F2/F = kQq/16r² × r²/kQq
F2/F = 1/16
F2 = 1/16 F
Therefore the coulombic force between two ions is reduced to 1/16 of its original strength when the distance between them is quadrupled.
Two blocks of masses 1.0 kg and 2.0 kg, respectively, are pushed by a constant applied force F across a horizontal frictionless table with constant acceleration such that the blocks remain in contact with each other, as shown above. The 1.0 kg block pushes the 2.0 kg block with a force of 2.0 N. The acceleration of the two blocks is
0
1.0 m/s2
1.5 m/s2
2.0 m/s2
3.0 m/s2
Answers
Answer:
1.0 m/s^2
Explanation: happy to help :)
Answer: [tex]1\ m/s^2[/tex]
Explanation:
Given
Masses of the block are [tex]m_1=1\ kg[/tex] and
[tex]m_2=2\ kg[/tex]
Force applied by [tex]1\ kg[/tex] block on [tex]2\ kg[/tex] block is [tex]2\ N[/tex]
From the free body diagram of [tex]2\ kg[/tex] block, the net force on
[tex]\therefore m_2a=2\\\\\Rightarrow 2\times a=2\\\\\Rightarrow a=\dfrac{2}{2}\\\\\Rightarrow a=1\ m/s^2[/tex]
Thus, the acceleration of two blocks is [tex]1\ m/s^2[/tex]
Learn more: https://brainly.com/question/2361110
An electron is released from rest in a unifor electric field and accelerates to the north at a rate of 145 m/s^2. What is the magnitude and direction of the electric field?
Answers
Answer:
E = 8.26*10⁻¹⁰ N/C, due south.
Explanation:
Assuming no other forces acting on the electron than the electrostatic force due to the electric field, we can apply Newton's 2nd law as follows:[tex]F = -eE =ma (1)[/tex]
Solving for E, we can find its magnitude as follows:[tex]E =\frac{m*a}{e} = \frac{9.1e-31 kg*145m/s2}{1.6e-19C} = 8.26e-10 N/C (1)[/tex]
The direction of the electric field is by definition the one that would take a positive test charge, so if the electron is accelerated to the north, the electric field would exactly oppose to this direction, so it is directed due south.Sb +
Cl2 →
SbCl3
Balance chemical equation
Answers
Answer:
Cl2 + Sb → SbCl3
Cl2 + Sb → SbCl5
Cl2 + Sb → SbCl
Cl2 + Sb → SbCl2
Cl2 + Sb → SbCl3 + SbCl5
Explanation: Hope it will help
To balance the chemical equation Sb + Cl₂ → SbCl₃ on further simplification The final balanced chemical equation is Sb + 3Cl₂ → SbCl₃.
Let's start by balancing the antimony (Sb) atoms:
On the left side, we have 1 Sb atom, and on the right side, we also have 1 Sb atom. The antimony is already balanced.
Next, let's balance the chlorine (Cl) atoms:
On the left side, we have 2 Cl atoms, and on the right side, we have 3 Cl atoms. To balance the chlorine, we need to multiply the Cl₂ on the left side by 3:
Sb + 3Cl₂ → SbCl₃
Now, the chlorine atoms are balanced.
The final balanced chemical equation is:
Sb + 3Cl₂ → SbCl₃
To know more about balanced chemicals equation:
https://brainly.com/question/34199830
#SPJ6
A wave travels at 175 m/s along the x-axis.If the period of the periodic vibrations of the wave is 3.00 milliseconds,then what is the wavelength of the wave?
A) 25.5 cm
B) 35.6 cm
C) 42.9 cm
D) 49.5 cm
E) 52.5 cm
Answers
Answer:
E) 52.5 cmExplanation:
Step one:
given data
period T= 3 milliseconds= 0.003
velocity v= 175m/s
wave lenght λ=?
Step two:
we know that f=1/T
the expression relating period and wave lenght is
v=λ/T
λ=v*T
λ=175*0.002
λ=0.525m
to cm= 0.525*100
=52.5cm
The wavelength of the wave is E) 52.5 cm
The wavelengths corresponding to the harmonics of an organ pipe that is open at one end and closed at the other can be found by saying that the length of the pipe must be equal to:___________.
A. an integer number of wavelengths.
B. an odd number of half-wavelengths.
C. an integer number of half-wavelengths.
D. an odd number of quarter-wavelengths.
Answers
Answer:
The answer is "Option D"
Explanation:
Its ranges referring to the harmonic currents of its organ pipe which are open at one end and shut at another side could be noticed saying whether a strange amount of quarter-wavelengths should equal the length of its pipe. It's also the fourth wavelengths principle to have enough space and consume a minimum of 25% of our design frequency, as we're going to be taking 40 Hz.
7. DRAW A PICTURE TO SHOW WORK.
Brandon buys a new Seadoo. He goes 12
km north from the beach. He jumps
wakes for 6 km to the east. Then chases
a boat 12 km south. He then turns and
goes 3 km to the West. What distance
did he cover? What was his
displacement?
Answers
Distance covered 28 km
displacement is 22.8 km North-East
Explanation;
Three liquids that will not mix are poured into a cylindrical container. The volumes and densities of the liquids are 0.50 L, 2.6 g/cm³; 0.25 L, 1.0 g/cm³; and 0.40 L, 0.80 g/cm³. What is the force on the bottom of the container due to these liquids? One liter = 1 L = 1000 cm³. (Ignore the contribution due to the atmosphere.)
Answers
Answer:
The force is [tex]F = 18.33 \ N[/tex]
Explanation:
From the question we are told that
The number of liquids is n = 3
The volume of the first liquid is [tex]V_1 = 0.50 L = 0.0005 \ m^3[/tex]
The density of the first liquid is [tex]\rho_1 = 2.6 \ g/cm^3[/tex]
The volume of the second liquid is [tex]V_2 = 0.25 L = 250\ cm^3[/tex]
The density of the second liquid is [tex]\rho_2 = 1.0 \ g/cm^3[/tex]
The volume of the third liquid is [tex]V_3 = 0.40 L = 400\ cm^3[/tex]
The density of the third liquid is [tex]\rho_3 = 0.80 \ g/cm^3[/tex]
Generally the force at the bottom of the container is mathematically represented as
[tex]F = m_t * g[/tex]
Here [tex]g = 980.665 \ cm/s^2[/tex]
Here [tex]m_t[/tex] is the total mass of all the liquid which is mathematically represented as
[tex]m_t = ( V_1 * \rho_1 )+ ( V_2 * \rho_2)+ ( V_3 * \rho_3)[/tex]
=> [tex]m_t = ( 500 * 2.6)+ ( 250 * 1.0 )+ ( 400 * 0.80 )[/tex]
=> [tex]m_t = 1870 \ g[/tex]
So
[tex]F = 1870 * 980.66[/tex]
=> [tex]F = 1833843.55 \ g \cdot cm /s^2[/tex]
=> [tex]F = 1833843.55 \ g \cdot cm /s^2 = \frac{1833843.55}{1000 * 100} kg \cdot m /s^2[/tex]
=> [tex]F = 18.33 \ N[/tex]
Find the binding energy per nucleon for the plutonium isotope 239Pu. The mass of the neutral atom is 239.05216 u.
Answers
Answer:
The answer is "[tex]\bold{7.56 \ Me\ V}[/tex]".
Explanation:
calculating the binding energy on per nucleon:
calculating number of proton and neutrons:
proton [tex]P_u=94[/tex]
neutron[tex]= 239-94=145[/tex]
calculating mass:
proton mass [tex]\ m_P=1.007825 \ amu\\\\[/tex]
neutron mass [tex]\ m_n=1.008665 \ amu\\\\[/tex]
neutral atom mass [tex]m = 239.05216 \ amu\\\\[/tex]
mass of prtons[tex]= 94 \times 1.007825 = 94.73555 \ amu\\\\[/tex]
mass of neutrons[tex]= 145 \times 1.008665= 146.256425 \ amu\\\\[/tex]
Total nucleons mass formula:
[tex]\to m_n = (P+n)[/tex]
[tex]= 94.73555+ 146.256425\\\\= 240.991975 \ amu[/tex]
calculating the mass of defect:
[tex]\to \Delta m= m_n-m\\\\[/tex]
[tex]= 240.991975 - 239.05216\\\\= 1.939815 \ amu\\\\[/tex]
calculating the total of the binding energy:
[tex]\to BE=\Delta m\times 931.5 \ mev[/tex]
[tex]= 1.939815 \times 931.5\\\\=1806.938 \ Me \ V\\\\[/tex]
BE in per nucleon [tex]=\frac{BE}{239}= 7.56 \ Me\ V[/tex]
Two cylinders each with a 60 cm diameter, thatare closed at one end, open at the other, are joined to form asingle cylinder, then the air inside is removed.
How much force does the atmosphere exert onthe flat end of each cylinder?
Suppose one cylinder is bolted to a sturdy ceiling. How many 90 kg football players would need to hang from the lower cylinder to pull the two cylinders apart
Answers
Answer:
a
The force is [tex]F = 2864561.4 \ N[/tex]
b
The number is [tex]N = 3248 \ players[/tex]
Explanation:
From the question we are told that
The of each cylinder is [tex]d = 60 \ cm = 6 \ m[/tex]
The mass of the players is [tex]m = 90 \ kg[/tex]
Generally the cross-sectional area of the cylinder is mathematically represented as
[tex]A = \pi * \frac{d^2}{4}[/tex]
=> [tex]A = 28.3 \ m^2[/tex]
Generally force exerted on the flat end of each cylinder is mathematically represented as
[tex]F = A * P[/tex]
Here P is the atmospheric pressure with value [tex]P = 101300 \ Pa[/tex]
So
[tex]F = 28.3 * 101300[/tex]
=> [tex]F = 2864561.4 \ N[/tex]
Generally the weight of a single football player is
[tex]W = m * g[/tex]
=> [tex]W = 90 * 9.8[/tex]
=> [tex]W = 882\ N[/tex]
Generally the number of player required to pull the two cylinders apart is mathematically represented as
[tex]N = \frac{ F }{W}[/tex]
=> [tex]N = \frac{ 2864561.4 }{882}[/tex]
=> [tex]N = 3248 \ players[/tex]
One of the major differences between our common Physics models of energy change and realistic models of them is:
a
In the Physics models, the acceleration due to gravity is rounded to a non-exact but easier to use number
b
In the Physics models, the velocities are only calculated at set intervals of time, instead of continuously
c
In the Physics models, the objects are assumed to have simplified shapes in order to make motion by acceleration easier to calculate
d
In the Physics models, we do not take into account the energy change by the friction of moving components
Answers
Answer:
d
In the Physics models, we do not take into account the energy change by the friction of moving components
Answer:
In the Physics models, we do not take into account the energy change by the friction of moving components
Which objects cannot be observed in detail without a microscope?
Answers
Answer:
partecls
Explanation:
because they are to small to see with plain eyes
The sharper the sound is the smaller the frequency of a vibrating body true or false
Answers
Which of the following statements are true of cancer types? Check all that apply. --
- Cancer is named according to the color the cells turn.
- Skin cancer is considered a very common type of cancer.
- Cancer is often named according to what body type it affects.
- Skin cancer is the least common type of cancer.
Answers
the answer is cancer is often named according to what body type it affects
Answer:
B,C
Explanation:
skin cancer is considered a very common type of cancer. Cancer is often named accordingly to a body type it affects.
Was the Big Bang a loud explosion? Why?
Answers
Answer:
bc it was a universal explosion and It started the future
Explanation:
FACTS
Answer:
i wouldn't believe so.
Explanation:
because there was no room or air for the sound to move through. this is because of immense heat and the amount of hyperactive neutrons, electrons and protons clouding everywhere. This would mean that even if there was sound it would a. not travel far or b. go in a completely different direction than expected.
what is the efficiency of a machine that uses 102kj of enegery to do 98 kJ of work?
Answers
Answer: I got an increase of 306 kJ in internal energy.
Explanation: I used the 1st Law and the sign convention to get the answer in the screenshot.
(sorry if i'm wrong)
:(
The efficiency of the machine is 96.07%.
What is efficiency?Efficiency can be defined as the ratio of work output to work input expressed in percentage.
To calculate the efficiency of the machine, we use the formula below.
Formula:
E(%) = (Wo/Wi)100.......... Equation 1Where:
E(%) = Efficiency of the machineWi = Work input of the machineWo = Work outputFrom the question,
Given:
Wi = 102 kJWo = 98 kJSubstitute these values into equation 1
E(%) = (98/102)100E(%) = 96.07%Hence, the efficiency of the machine is 96.07%.
Learn more about efficiency here:
which of the following is true of phototsythesis but not of cellular respiration.
A- Photosynthesis releases oxygen gas as a product
B- Photosynthesis occurs in all organisms
C- Photo synthesis is a process in which glucose i broken down
D- Photosynthesis requires glucose as a reactant
Answers
Answer:
B. Photosynthesis occurs in all organisms
Hope this helps!! :)
What is causing the boat to move toward the shore?
A
The moving water applies a force on the boat, which results in the boat pushing
back on the water, propelling the boat forward.
B
The moving wind applies a force on the boat, which results in the boat pushing
back on the wind, propelling the boat forward.
с
The boy applies a force on the oars, which results in the water pushing back on
the oars, propelling the boat forward.
D
The boy applies a force on the oars, which results in gravity pushing back on the
oars, propelling the boat forward.
Answers
Answer:c
Explanation:because when u push the oar back u go forward
Answer:
It's C. Because this is a Newton's 2nd Law about force and acceleration and he's putting force on the oars which is making the boat goe forward due to the water and the movements.
Explanation:
If a ball has kinetic energy of 1000 joules and a speed of 5m/s, what is its mass?
Answers
Answer:
m = 80[kg]
Explanation:
The kinetic energy can be calculated by means of the following equation.
[tex]E_{k}=\frac{1}{2}*m*v^{2}[/tex]
where:
m = mass [kg]
v = velocity = 5 [m/s]
Ek = kinetic energy = 1000 [J]
Now replacing:
[tex]1000 = \frac{1}{2} *m*5^{2}\\2000 = 25*m\\m=80[kg][/tex]
The mass of a ball will be "80 kg".
Kinetic energy:According to the question,
Kinetic energy, [tex]E_k[/tex] = 1000 Joules
Velocity, V = 5 m/s
As we know the formula,
→ Kinetic energy = [tex]\frac{1}{2}[/tex] × mass × (velocity)²
→ [tex]E_k = \frac{1}{2}[/tex] × m × v²
By substituting the values,
[tex]1000= \frac{1}{2}\times m\times (5)^2[/tex]
[tex]1000\times 2=25\times m[/tex]
[tex]2000=25\times m[/tex]
[tex]m = \frac{2000}{25}[/tex]
[tex]= 80[/tex] kg
Thus the above answer is correct.
Find out more information about kinetic energy here:
https://brainly.com/question/25959744
compute the velocity of light in calcium fluoride which has dielectric constant of 2.056 .
Answers
Answer:
idl low presure but de 2.518 has a 6 divide 8 equal di. ko alam?plz help asap.
1. Describe the methods by which an electric potential develops in primary cells and dry cells.
2. Describe the methods by which an electric potential develops in generators and thermocouples.
3. Identify the scenarios below as to whether they would increase or decrease the resistance of an electric current through a body.
a. Increase the length of the conductor
b. Utilize a conductor with a larger cross-section
c. Cool the conductor to lower its temperature
4. If 0.8 Wh of electrical energy is lost as heat, how much heat energy (in Btu) is produced?
5. How many kilowatt-hours of energy would be used by a 40 W bulb that runs for 10 hours every day during the course of one year?
Answers
Not my answer but nevertheless
Answer:
Electric potential develops in primary/dry cells through a chemical reaction between the cell plates of the cell. free electrons move from the zinc plate to the copper plate through a conducting material.
Electric potential develops in Generators via magnetic induction i.e. the movement of a conducting rod through the magnetic field between the poles of the horseshoe magnets produces Electric potential in Generators.
Electric potential develops in thermocouples via heat transfer ; A heat source is applied to the connecting end of the thermocouple strips and this will cause the production electric charges ( potential ) at the free ends
3) Identifying effect of each scenerio
a) The resistance of an electric current will increase when the length of the conductor increases
b) The resistance of an electric current through a body will decrease when the conductor has a larger cross-section
c) The resistance of an electric current through a body will decrease when the temperature of the conductor is cooled
4) The amount of heat lost as heat in Btu = 2.73 Btu
amount of heat lost = 0.8 Wh
convert to Btu = 0.8 Wh / 0.293 = 2.73 Btu ( note : 1 Btu = 0.293 Wh )
5) The amount of of energy used by a 40 W bulb for 365 days = 146 kWh
Power of bulb = 40 W
Run time = 10 hours * 365 days
∴ amount of energy used = 3650 * 40 = 146 * 10^3 Wh = 146 kWh
Is a seashores diverse or uniform?
Answers
Answer:
uniformes
Explanation:
Why are u asking this
45.0g of a sample placed in a graduated cylinder causes the water level to rise from
25.0mL to 40.0mL. Density of the sample is?
Answers
Answer:
3g/mL
Explanation:
The density of a substance can be calculated using the formula;
Density = mass/volume
Where;
Density = g/mL
mass = grams (g)
volume = (mL)
According to this question, 45.0g of a sample placed in a graduated cylinder causes the water level to rise from
25.0mL to 40.0mL. This means that the volume of the sample is 40mL - 25mL = 15mL
Using D = m/v
D = 45/15
D = 3g/mL
Hence, the density of the sample is 3g/mL
Describe how radiant energy, light energy, and solar energy are related. ( Please ❤️ )
Answers
Answer:
L’énergie solaire récolte l’énergie radiante portée par la lumière de notre soleil en la convertissant en électricité.Biomasse des plantes. Les plantes sont capables d’exploiter et d’utiliser l’énergie lumineuse dans un processus appelé photosynthèse.
Answer:
Radiant energy, light energy, and solar energy are related because The Sun produces a lot of radiant energy that is transmitted to Earth as light. Plants convert the electromagnetic energy in sunlight into chemical energy for their food, through a process called photosynthesis. Waves of radiant electromagnetic energy can be visible or invisible.
Explanation:
When the displacement of a mass on a spring in simple harmonic motion is A/2 from the equilibrium position, what fraction of the total mechanical energy is kinetic energy?
Answers
Answer:
The ratio is KE : TM = 0.75
Explanation:
from the question we are told that
The displacement of a mass on a spring in simple harmonic motion is A/2 from the equilibrium position
Generally the total mechanical energy of the mass is mathematically represented as
[tex]TM = \frac{1}{2} * k * A^2[/tex]
Here k is the spring constant , A is the total displacement of the the mass from maximum compression to maximum extension of the spring
Generally this total mechanical energy is mathematically represented as
[tex]TM = KE + PE[/tex]
=> [tex]KE = TM - PE[/tex]
Here the potential energy of the mass is mathematically represented as
[tex]PE = \frac{1}{ 2} * k * [ x ]^2[/tex]
Here x is the displacement of the mass from maximum compression or extension of the spring to equilibrium position and the value is
[tex]x = \frac{A}{2}[/tex]
So
[tex]PE = \frac{1}{ 2} * k * [ \frac{A}{2} ]^2[/tex]
So
[tex]KE = \frac{1}{2} * k * A^2 - \frac{1}{2} * k * [\frac{A}{2} ]^2[/tex]
=> [tex]KE = \frac{1}{2} * k * A^2 - \frac{1}{8} * k * A ^2[/tex]
=> [tex]KE = 0.375 * k * A^2[/tex]
So the ratio of [tex]KE : TM[/tex] is mathematically represented as
[tex]\frac{KE}{TM} = \frac{0.375 k A^2 }{0.5 k A^2}[/tex]
=> [tex]\frac{KE}{TM} = 0.75[/tex]