Mineralogy/ Subject Earth Science
1. Were you able to extract the chocolate chip without breaking the cookie? Why or why not?
2. How would you describe the process of mining based on this activity?
please answer correctly
Answer:
Explanation:
Many of the products we use everyday – from plastic water bottles to wrist watches and crayons to headphone wires – are produced from rocks and minerals mined from the earth. These rocks and minerals are considered a non-renewable resource because there is only a set amount of each and once it is used up, it will be gone forever. Some of these resources are very common and others are scarce. As the human population has grown, the demand for these resources has grown as well.
Extracting rocks and minerals from the earth is typically done by mining. Large scale mining operations are used all over the world and can often damage the
land on which they take place. Unfortunately, the
end result of mining (the profits made by selling the ore) can at times overshadow the damage done by the process (destroyed animal habitat, clear cutting of trees, pollution of local
streams, etc.).
Countries most likely create internal boundaries to __________.
Answer:
Countries most likely create internal boundaries to: divide territory for administrative purposes.
Urbanization is a social process, discuss
Answer:
La urbanización es el proceso por el cual la población tiende a concentrarse en áreas urbanas. Las Naciones Unidas en su revisión 2018 del World urbanization prospects señala que durante ese año 55% de la población mundial habitaba en ciudades y que ese porcentaje se elevará a 68% para 2050.
Explanation:
porque ie
Most scientists and historians believe that Native Americans first came to North America ___.
Answer:
on 4th jan 2012
Explanation:
USING DIAGRAMS, EVALUATE THE ROLE
OF STATISTICS GEOGRAPHY STUDIES
Answer:
im not suree
Explanation:
Mineralogy/EARTHSCIENCE
Answer the following questions briefly but concisely. Remember to answer in complete sentences
1. What is the importance of mineral exploration?
2. Differentiate surface mining from underground mining.
3. What is milling? Why extracted materials should undergo milling process before refining them?
:please answer them correctly
Answer:
Explanation:
1-Exploration is an important step in finding minerals so they can be potentially mined. Our demand for minerals is increasing, for example we need more copper to build renewable energy assets such as wind turbines. This demand is helping drive an increase in exploration across the state.
2-In surface mining, the ore is accessed directly from the Earth's surface, and contact is maintained with the surface throughout the operation. Underground or subsurface mining is accomplished with the help of tunnels going into the Earth, and does not occur on the surface.
3-Milling
food processing
The flour milling process begins with cleaning the grain and tempering it by adding water. The tempered grain is ground in a series of rollermills to remove the bran and to cut the endosperm. Between each rollermill cycle, the ground grain is sifted and separated into various sizes. Middle-size material is sent to a purifier, or shaking sifter, and on to another set of rollermills for further reduction and sifting into a variety of flours and flour blends. These are then stored in large bins.
The flour milling process begins with cleaning the grain and tempering it by adding water. The tempered grain is ground in a series of rollermills to remove the bran and to cut the endosperm. Between each rollermill cycle, the ground grain is sifted and separated into various sizes. Middle-size material is sent to a purifier, or shaking sifter, and on to another set of rollermills for further reduction and sifting into a variety of flours and flour blends. These are then stored in large bins.
Encyclopædia Britannica, Inc.
LEARN ABOUT THIS TOPIC in these articles:
beer
top 20 beer-consuming countriesIn beer: Milling
For efficient extraction with water, malt must be milled. Early milling processes used stones driven manually or by water or animal power, but modern brewing uses mechanically driven roller mills. The design of the mill and the gap between the rolls are important in…
READ MORE
cereal
wheatIn cereal processing: Milling
Cereal processing is complex. The principal procedure is milling—that is, the grinding of the grain so that it can be easily cooked and rendered into an attractive foodstuff. Cereals usually are not eaten raw, but different kinds of milling (dry and wet) are employed,…
READ MORE
distilled spirits
The fermentation and distillation process for producing whiskey. The production of whiskey begins with grinding grain into a meal, which is cooked. Malt is introduced to the meal, which results in mash that is cooled and pumped into a fermenter, where yeast is added. The fermented mixture is heated in a still, where the heat vaporizes the alcohol. The alcohol vapours are caught, cooled, condensed, and drawn off as clean, new whiskey. This liquid is stored in a cistern room, and water is added to lower the proof (absolute alcohol content) before the whiskey is placed in new charred oak barrels for aging and later bottling.In distilled spirit: Milling and pressing
The purpose of milling and pressing is to make the starch or sugar more available for enzyme action. Crushing and pressing (grapes and other fruits), milling (cereal grains), or a combination of milling and pressing (sugarcane) are used.
READ MORE
flour
The flour milling process begins with cleaning the grain and tempering it by adding water. The tempered grain is ground in a series of rollermills to remove the bran and to cut the endosperm. Between each rollermill cycle, the ground grain is sifted and separated into various sizes. Middle-size material is sent to a purifier, or shaking sifter, and on to another set of rollermills for further reduction and sifting into a variety of flours and flour blends. These are then stored in large bins.In flour
… flour, the purpose of the milling process is to separate the endosperm from the other kernel portions. In the production of whole wheat flour, all parts of the kernel are used.
READ MORE
wheatIn cereal processing: Wheat flour
The milling of wheat into flour for the production of bread, cakes, biscuits, and other edible products is a huge industry. Cereal grains are complex, consisting of many distinctive parts. The objective of milling is separation of the floury edible endosperm from the various branny outer…
READ MORE
rice
wheatIn cereal processing: Milling
Milling methods used in most of Asia are primitive, but large mills operate in Japan and some other areas. Hulling of the paddy is usually accomplished by pestle and mortar worked by hand, foot, or water power. Improvements are slowly taking place. The yield…
READ MORE
sugarcane
sugarcaneIn sugar: Juice extraction
…of up to eight four-roll mills, it is forced against a countercurrent of water known as water of maceration or imbibition. Streams of juice extracted from the cane, mixed with maceration water from all mills, are combined into a mixed juice called dilute juice. Juice from the last mill in…
Why are earthquakes on continents most likely to occur above the brittle-plastic transition depth?
En que el hemisferio está Italia
Answer:
La respuesta es el hemisferio norte
The mixture of gases and conditions in the Earth’s atmosphere make life possible. Most organisms need the oxygen in our atmosphere to survive and the nitrogen there is critical to the building of proteins and nuclei acids. What other important component of Earth’s atmosphere helps to regulate the temperature on Earth? A. Methane B. Water vapor C. Carbon dioxide D. Diatomic oxygen
Answer: The answer is D
Explanation:
How does geologic hazards affects the natural landscape of the Earth?
Answer:
mhjhk
Explanation:
jkjkjk
One reason that Catastrophism was popular was:
Answer:
Explanation: One reason that Catastrophism was popular was: Ussher’s estimation age of the earth is a huge events to form mountains and canyons.
What are the greenhouse effects on polar temperature records? Give examples
Answer:
Carbon dioxide raises global temperature by trapping heat that would otherwise escape directly into space. Also, warming temperatures in the Arctic may release even more carbon dioxide and other greenhouse gases such as methane, by melting frozen soil called permafrost. For example, melting glaciers and icebergs in the poles claim increasing heat.
Mineralogy/EARTHSCIENCE
Take Away Question: Think!
Improper mining can cause damage to a landscape in an area much larger than the mining site itself. The effects of this damage include the addition to greenhouse gasses, death of flora and fauna, and erosion of land and habitat.
Give preventive measures to prevent effects of irresponsible mining.
:please answer correctly
1. Recuperación.
2.Tratamiento del suelo.
3Tratamiento del agua.
4.Prevención del drenaje ácido de roca.
5.Control de las emisiones de gas.
PLEASE HELP IF YOU CAN <3 !!!
Answer:
IF YOU CAN <3 !!! HELP !!!
please help,
The largest landforms are...
A: Peninsula
B: Countries
C: Continents
D: Mountains
Answer:
B.Countries
Explanation:
This is because the form the largest landforms
Answer:
the answer is continents
How aid can help development?
Answer:
Encouraging aid industrial development can create jobs and improve transport infrastructure.
Explanation:
Infrastructure projects may end up benefiting employers more than employees. Aid can support countries in developing their natural resources and power supplies. Some development projects may lead to food and water costing more.
Como crees que las personas solucionaban sus
necesidades de ubicacion y desplazamiento antes
del desarrollo de estas tecnologias?
En el pasado, cuando la tecnología de las comunicaciones y el transporte no se habían desarrollado hasta el punto en que se encuentran hoy, las personas solucionaban sus necesidades de ubicación y desplazamiento de forma artesanal.
Así, se utilizaban para la ubicación instrumentos que se guiaban mediante los astros, y para el desplazamiento se utilizaban diversos animales como caballos, bueyes o mulas.
Aprende más en https://brainly.com/question/16066812
Each year, new seafloor is added at the Mid-Atlantic Ridge. The Atlantic Ocean widens, causing North and South America to move farther away from Europe and Africa. Close to the ridge, rocks are younger. As you move away from the ridge, the rocks become older.
The rate of seafloor spreading has not been the same over time. In this activity, you will calculate the average rate of seafloor spreading and then determine when the seafloor started to spread.
1. Where would you find the oldest sections of seafloor, near the continents or near the Mid-Atlantic Ridge?
Working with Map Scales
Below is a map of a section of the North Atlantic. You can see the coastlines of North America and Africa. On both sides of the Mid-Atlantic Ridge, strips of seafloor are labeled with their ages in millions of years. Note the map scale.
2. What is the scale of the map? For this activity, you will use centimeters.
cm = km
3. Choose one strip of seafloor rock. What is the age of the rock?
4. Use your ruler to measure the distance of the strip from the Mid-Atlantic Ridge.
cm
5. Using the calculator, multiply the answer to #4 by 405 to figure out its distance in kilometers. Round to the nearest whole number.
km
Determining Rate of Spreading
Use the age of the rock you have chosen and its distance from the Mid-Atlantic Ridge to calculate seafloor spreading.
6. First you will find out how fast the seafloor is moving away from the ridge on one side. Use a calculator to divide the answer to #5 by the answer to #3. Round to the nearest whole number.
#5 km ÷ #3 million years = km/million years
7. Now find out how fast the seafloor widens every 1 million years. Multiply the answer you got in #6 by 2.
The seafloor spreads at a rate of km every 1 million years.
When Did the Seafloor Start Spreading?
The distance between Point A and Point B, or the coasts of Africa and North America, is 4,550 km. Using your answer to #7, find out when the Atlantic Ocean began to open. Divide 4,550 km by your answer in #7 to find out.
8. 4,550 km ÷ #7 = million years ago.
9. Look at the Geologic Timeline. During what geologic period did the Atlantic start to open?
See if you can figure out the rate of floor spreading (in cm/year) between North America and Africa.
10. #7 x 1000 m x 100 cm ÷ 1,000,000 years = cm/year
11. How far, in centimeters, has the distance between North America and Africa increased since you were born? Multiply the rate by your age.
cm
12. How much has the distance increased during the average lifetime of 82 years?
cm
13. How much closer were the continents when Columbus crossed the Atlantic in 1492?
cm
Mid atlantic rangeAnswer:
Explanits older
Answer:
F,JKVFJKGNJNDHGTGU8T8UTUI
Explanation:
In which region are the Rocky Mountains located?
East
Northwest
Southeast
West
Answer:
I would say D
Explanation:
Minerals used as ferroalloys such as chromium are essential to the production of specialty steels. Jet engines used in military aircraft are made of specialty steel. Political considerations can influence the import of resources from other countries. During the Cold War, communist countries such as the Soviet Union and China were not used as major suppliers of chromium because of military implications. Reset the map. Select Chromium Production by Country. Which of the following countries would be the best source of chromium for specialty steel production within the United States?
You did not open hints for this part.
a. South Africa
b. Brazil
c. Zimbabwe
d. India
e. Russia
Answer:
South Africa
Explanation:
During the Cold War South Africa was a major source of chromium for the United States. South Africa was considered the alternative to imports from the Soviet Union and the People’s Republic of China. Even though there was a world-wide embargo on South African commodities because of its policy of apartheid, the United States imported chromium from the world’s second largest producer. Even though Brazil is located closer to the United States, its chromium production is considerably less than that of South Africa.
The country that would be the best source of chromium for specialty steel production within the United States is South Africa.
This is because South Africa is known to have the highest deposits of chromium, with about 17,000,000 out of the 40,000,000 worldwide.
Also, South Africa was known to have supported the likes of the United States during the Cold War.
Options B and C are wrong because Brazil and Zimbabwe have no chromium deposits.
Option D is wrong because India stylishly supported the Soviet Union during the cold war; hence, they wouldn't have supplied the United States with the Chromium needed.
Also, option E is wrong because Russia forms the larger part of the Soviet Union, and till today they are still not on the same side in most political issues.
Hence, in this case, it is concluded that the correct answer is option A." South Africa."
Learn more here: https://brainly.com/question/14192117
In which region are the Rocky Mountains located?
East
Northwest
Southeast
West
Answer:
I would say either Northwest or West.
Explanation:
The Rocky Mountains are a vast mountain range in western North America that includes the United States and Canada. The "Rockies," as they are also called, go across northern New Mexico before continuing into Colorado, Wyoming, Idaho, and Montana.
Lemme know if I'm right!
2. Why we reduce a map?
Answer:
Large scale maps are required for urban planning. These provide large space in which detailed information and even the smallest points can be shown. Therefore, at times map is quite big but we have to reduce it according to size of paper and need so that major features may be concentrated upon. Measure the length and width of the map. Divide the length and width by 2 if you are asked to reduce the map to half of its original size. For example, if the length and width of a map are 30cm and 20cm respectively, such a map should measure 15cm by 10cm if reduced to half its size.
which two processes can harm soil fertility?
Answer:
Erosion, compaction, nutrient imbalance, pollution, acidification, water logging, loss of soil biodiversity and increasing salinity have been affecting soil across the globe, reducing its ability to support plant life and so grow crops.
Answer:
"Erosion, compaction, nutrient imbalance, pollution, acidification, water logging, loss of soil biodiversity and increasing salinity have been affecting soil across the globe, reducing its ability to support plant life and so grow crops."
Explanation:
what is the mertis and demeteris of Ethiopia large size
which scientist formulated the idea of geological time ?
Answer: Scottish geologist James Hutton
Explanation: (1726–1797); his "system of the habitable Earth" was a deistic mechanism keeping the world eternally suitable for humans.
Answer:
James Hutton
Explanation:
Just know. But I bet you 100000% its right. No doubt its James Hutton
21. How are levels of economic activities connected to a region's level of development? Be sure to provide examples of primary, secondary, tertiary, and quaternary activities and how they are related to development. (5 points)
Economic activities which includes effective trading patterns influence all country's level of development.
Countries such as China, France, United States, Japan are addressed as developed countries with sound economy because of their Modern industrial societies which brought fortunes to their revenue coffers.
There are four type of economic activities:
Primary activities: its involves the extracting, mining, farming, fishing etc activities. Secondary activities: Its involves manufacturing and production of goods such as making cars, steel etc Tertiary activities: Its involves providing a service such as teaching, medicine, nursing etcQuaternary activities: Its involves research and development industries which aims at improving the other three activities.Therefore, countries with these effective economic activities will have a developing economic system which will be influential in world.
Learn more about Economic activities here
brainly.com/question/7244467
Which European plain stretches
from southeast England to western
France and includes parts of
Denmark, France and Germany?
A. the Northern European plains
B. the Southern European plains
C. the Western European plains
Answer: The Northern European Plains.
Explanation: I hope this answers your question :)
The European plain that stretches from southeast England to western France and encompassing various parts is called as a Northern European Plain.
Option A is correct.
What is a plain?A plain is referring to land which is usually having no trees and not change much in elevations.
Northern European plains are the most populated areas of the European country stretched from south side of United Kingdom to east side of Russia. It is the region having a suitable climate for cultivating only the seasonal crops.
Therefore, the Option A is correct.
Learn more about the North European plain in the related link:
https://brainly.com/question/5143394
#SPJ2
list all important land use zones
Answer:
hi do u see my answer? pls tell me
you haven't attach a picture bro
Now look at photo A oon page 86. which is the main process going on there? Explain.
Answer:
I pick over an hour questions for points
Explanation:
forgive me
what is the value of x
Answer:
since no numbers you will assume it is 1
Explanation: