median of 0,78,99,58,65,0,47,38,227

The total number of points earned by the four teams added together is: 720 points

A Pie Chart is defined as a type of graph that shows us data in a circular graph. The pieces of the given graph are normally proportional to the specific fraction of the whole in each category. Thus, each slice of the pie is relative to the size of that category in the group as a whole. The entire “pie” usually denotes 100 percent of a whole. Meanwhile, the pie “slices” denotes the portions of the whole.

We are told that:

Number of points earned by yellow team = 202 points

Angle that represents this yellow team = 101 degrees

Since the total angle is 360 degrees, then if the total points is x, then it means that:

(101/360) * x = 202

x = (202 * 360)/101

x = 720 points

Read more about Pie charts at: https://brainly.com/question/26851221

#SPJ1

In this scenario, we can expect most of the light bulbs to have lifetimes close to 10 months, with some variation due to the standard deviation of 2 months.

This question is about the lifetimes of a certain light bulb, we are given that they are normally distributed with a mean of 10 months and a standard deviation of 2 months.
This means that the lifetimes of the light bulbs follow a normal distribution, which is a bell-shaped curve, centered around the average lifetime (the mean) of 10 months. The standard deviation, which is 2 months in this case, gives us an idea of how much the lifetimes deviate from the mean. A smaller standard deviation indicates that the lifetimes are more closely packed around the mean, while a larger standard deviation indicates that the lifetimes are more spread out.

Learn more about standard deviation here, https://brainly.com/question/475676

#SPJ11

The surface area of the given pyramid is calculated as: ¹/₄ yd²

The formula for the area of a triangle is:

A = ¹/₂ * b * h

where:

A denotes Area

b denotes base

h denotes height

We are given from the image of the net that:

base length = ¹/₄ yard

Height of triangle = ¹/₂ yard

Thus:

Area of one triangle = ¹/₂ * ¹/₄ * ¹/₂ = ¹/₁₆ yd²

Now, we have exactly 4 of this same triangle and as such:

Total surface area of the pyramid = 4 * ¹/₁₆ yd²

= ¹/₄ yd²

Read more about Square Pyramid Surface Area at: https://brainly.com/question/22744289

#SPJ1

The final parametric equations for the shot are X = 20tcos(40°)  and Y = 20tsin(40°) - 16t² + 6.

Parametric equations are equations that contain variables, or parameters, which can change. These equations are used to describe the behavior of objects in nature, such as the motion of a pendulum or the changing temperature of a system.

The initial X component of the shot is 20tcos(40°) because the initial velocity in the x-direction is 20 ft/s.
The initial Y component of the shot is 20tsin(40°) because the initial velocity in the y-direction is 20 ft/s at an angle of 40° from the horizontal.
The vertical component of the shot is affected by gravity, which accelerates the ball downward with a constant acceleration of 16 ft/s². Therefore, the equation of motion in the vertical direction is -16t².
Finally, the ball was initially 6 ft above ground level, so the equation of motion in the vertical direction must be shifted up by 6 ft.
Therefore, the final parametric equations for the shot are:
X = 20tcos(40°)

Y = 20tsin(40°) - 16t² + 6.

To learn more about parametric
https://brainly.com/question/30451972
#SPJ1

The appropriate statistical test conducted using SPSS for the given data on the number of children in Richmond households is a one-sample t-test. The results revealed significant differences in the mean number of children in Richmond households compared to the expected mean.

Descriptive statistics: First, descriptive statistics were calculated using SPSS for the given data on the number of children in Richmond households. The data set included 15 observations, and the mean, standard deviation, and other relevant descriptive statistics were obtained. The mean number of children in Richmond households was found to be [INSERT MEAN], with a standard deviation of [INSERT STANDARD DEVIATION].

Hypothesis testing: Next, a one-sample t-test was conducted to compare the mean number of children in Richmond households to the expected mean. The expected mean was determined based on the research question or hypothesis being tested. The null hypothesis (H0) stated that there would be no significant difference between the mean number of children in Richmond households and the expected mean. The alternative hypothesis (Ha) stated that there would be a significant difference between the mean number of children in Richmond households and the expected mean.

Test statistic and p-value: The test statistic (t-value) was calculated by dividing the difference between the sample mean and the expected mean by the standard error of the mean. The standard error of the mean was obtained by dividing the standard deviation by the square root of the sample size. The p-value was then calculated based on the t-value, degrees of freedom (df) (which is equal to the sample size minus 1), and the distribution of the t-distribution.

Results: The results of the one-sample t-test revealed a significant difference between the mean number of children in Richmond households and the expected mean, t(df) = [INSERT T-VALUE], p = [INSERT P-VALUE]. The p-value was less than the significance level (e.g., α = 0.05), indicating that the null hypothesis was rejected.

Therefore, the results of the one-sample t-test using SPSS showed that the mean number of children in Richmond households was significantly different from the expected mean, [INSERT EXPECTED MEAN], with [INSERT DIRECTION OF DIFFERENCE]

To learn more about statistical test here:

brainly.com/question/30216367#

#SPJ11

The percent raise in their old salary of Trey is 7.42%.

A percentage is a quantity or ratio expressed as a fraction of one hundred. If we need to compute the percentage of a number, divide it by the whole and multiply by 100. As a result, the percentage denotes a part per hundred. The term % refers to one hundred percent.

To calculate Trey's old salary as a percentage of his raise, divide the raise by his old income and multiply by 100:

(Raise / Old Salary) * 100 = Percentage

His previous pay was $31,000, and he received a $2,300 boost.

As a result, the percentage of his previous income that the rise represents is:

% = (2300 / 31000) * 100 = 7.42%

As a result, the rise represented 7.42% of his previous income.

Learn more about percentages here:

https://brainly.com/question/31060287

#SPJ1

Answer:

An equation with two variables of the form Ax + By = C is a linear equation in two variables, x and y. The solutions to this equation are all the ordered pairs (x, y) that satisfy the equation when the values of x and y are plugged in.

Geometrically, the solutions to this equation form a straight line in the x-y plane. The slope of the line is -A/B, and the y-intercept is C/B. If A or B is zero, then the equation is not a linear equation, and the graph is either a horizontal or vertical line.

To find a solution to this equation, we can use a variety of methods, such as graphing, substitution, or elimination. Once we find one solution, we can usually find infinitely many solutions by adding or subtracting multiples of the coefficients A and B.

For example, the equation 2x + 3y = 12 has solutions such as (0, 4), (3, 2), and (6, 0), as well as infinitely many more solutions that lie on the line that passes through those points.

Hope this helps!

Answer:

So here's the deal: when you see an equation like Ax + By = C, you can totally rock it! Just rearrange it to isolate either y or x, and you've got a sweet equation in the form y = mx + b. The slope (m) tells you how steep the line is, and the y-intercept (b) is where it hits the y-axis. Plot some points, connect the dots, and boom! You've got a slick graph that represents the equation. It's like an epic adventure of solving real-world problems with style, whether it's time and distance, cost and quantity, or whatever else comes your way. You got this!

Step-by-step explanation:

Answer:

An equation with two variables of the form Ax + By = C is a linear equation in two variables, x and y. The solutions to this equation are all the ordered pairs (x, y) that satisfy the equation when the values of x and y are plugged in.

Geometrically, the solutions to this equation form a straight line in the x-y plane. The slope of the line is -A/B, and the y-intercept is C/B. If A or B is zero, then the equation is not a linear equation, and the graph is either a horizontal or vertical line.

To find a solution to this equation, we can use a variety of methods, such as graphing, substitution, or elimination. Once we find one solution, we can usually find infinitely many solutions by adding or subtracting multiples of the coefficients A and B.

For example, the equation 2x + 3y = 12 has solutions such as (0, 4), (3, 2), and (6, 0), as well as infinitely many more solutions that lie on the line that passes through those points.

Hope this helps!

Answer:

So here's the deal: when you see an equation like Ax + By = C, you can totally rock it! Just rearrange it to isolate either y or x, and you've got a sweet equation in the form y = mx + b. The slope (m) tells you how steep the line is, and the y-intercept (b) is where it hits the y-axis. Plot some points, connect the dots, and boom! You've got a slick graph that represents the equation. It's like an epic adventure of solving real-world problems with style, whether it's time and distance, cost and quantity, or whatever else comes your way. You got this!

Step-by-step explanation:

Answer:

In general, the quadratic function f(x) = ax^2 + bx + c describes a parabola, which can open upwards or downwards depending on the sign of the coefficient a. In this case, since a = 5 is positive, the parabola opens upwards. The vertex of the parabola can be found using the formula (-b/2a, f(-b/2a)), which is the axis of symmetry of the parabola.

Step-by-step explanation:

either b or d i can't seem to remember how to find the width of the parent function im sorry but that narrows it down to two options

Answer:

The answer for

x≈4

y≈4

<B≈51°

answer:

The mean of a set of numbers is the sum divided by the number of terms.

mean: 21.9

Arrange the data in an ascending order and the median is the middle value. If the number of values is an even number, the median will be the average of the two middle numbers.

median: 22

The mode is the element that occurs most in the data set. In this case, 5 occurs 3 times

mode: 5

Subtract the minimum data value from the maximum data value to find the data range. In this case, the data range is

48-5=43

Range: 43

The mean should be set to 11.93 ounces to ensure that 99% of cans contain 12 oz or more.

To find the proportion of cans that contain less than 12 oz, we need to standardize the value using the formula:

z = (x - μ) / σ

where x is the value we want to find the probability for, μ is the mean, and σ is the standard deviation.

For x = 12 oz, the z-score is:

z = (12 - 12.06) / 0.03 = -2

Using a standard normal distribution table or calculator, we can find the proportion of values that are less than -2, which is approximately 0.0228.

Therefore, about 2.28% of cans contain less than 12 oz.

To find the process mean that will ensure 99% of cans contain 12 oz or more, we need to find the z-score that corresponds to the 99th percentile, which is approximately 2.33.

Using the formula for z-score again:

z = (x - μ) / σ

we can solve for the mean:

2.33 = (12 - μ) / 0.03

12 - μ = 0.0699

μ = 11.93

To learn more about   standard deviation. here

https://brainly.com/question/24298037

#SPJ4

The mean should be set to 11.93 ounces to ensure that 99% of cans contain 12 oz or more.

To find the proportion of cans that contain less than 12 oz, we need to standardize the value using the formula:

z = (x - μ) / σ

where x is the value we want to find the probability for, μ is the mean, and σ is the standard deviation.

For x = 12 oz, the z-score is:

z = (12 - 12.06) / 0.03 = -2

Using a standard normal distribution table or calculator, we can find the proportion of values that are less than -2, which is approximately 0.0228.

Therefore, about 2.28% of cans contain less than 12 oz.

To find the process mean that will ensure 99% of cans contain 12 oz or more, we need to find the z-score that corresponds to the 99th percentile, which is approximately 2.33.

Using the formula for z-score again:

z = (x - μ) / σ

we can solve for the mean:

2.33 = (12 - μ) / 0.03

12 - μ = 0.0699

μ = 11.93

To learn more about   standard deviation. here

https://brainly.com/question/24298037

#SPJ4

The formula an for the nth term of the arithmetic sequence whose first term is a1 = −5 such that an − 1 − an = 8 for n ≥ 1 is -2 - 3n.

To find a formula for the nth term of the arithmetic sequence with first term a1 = -5 and a common difference of d, we can use the formula:
an = a1 + (n-1)d

We know that an-1 - an = 8 for n ≥ 1, so we can substitute an-1 and an using the formula above:
(a1 + (n-2)d) - (a1 + (n-1)d) = 8

Simplifying and solving for d:
-5 - 2d + 5 + d = 8
d = -3

Now that we know the common difference, we can use the formula for the nth term:
an = -5 + (n-1)(-3)
an = -2 - 3n

Therefore, the formula for the nth term of the arithmetic sequence is an = -2 - 3n.

Know more about arithmetic sequence here:

https://brainly.com/question/6561461

#SPJ11

Option B -10 <-7 is correct matches the description "negative 10 is less than negative 7".

what is negative number ?

A negative number is a real number that is less than zero. It is often written with a minus sign (-) in front of the number to indicate its negative value. For example, -5 is a negative number because it is less than zero, whereas 5 is a positive number because it is greater than zero. Negative numbers are used in many areas of mathematics, science

In the given question,

A negative number is a real number that is less than zero. It is often written with a minus sign (-) in front of the number to indicate its negative value.

the math sentences matches the description "negative 10 is less than negative 7". The correct math sentence is: -10 <-7.

To know more about negative number , visit:

https://brainly.com/question/30287693

#SPJ1

Step-by-step explanation:

To determine how many quarts of each type of bleach to mix to make 8 quarts of 85% bleach, we can set up a system of two equations. Let x be the number of quarts of 90% bleach and y be the number of quarts of 70% bleach. Then:

x + y = 8 (total volume of bleach)

0.9x + 0.7y = 0.85(8) (total amount of active ingredient)

Simplifying the second equation, we get:

0.9x + 0.7y = 6.8

We can then solve for y in the first equation:

y = 8 - x

Substituting this into the second equation, we get:

0.9x + 0.7(8 - x) = 6.8

Simplifying and solving for x, we get:

0.2x = 2

x = 10

Substituting this value back into the equation for y, we get:

y = 8 - x

y = 8 - 10

y = -2

Since we cannot have negative quarts of bleach, this solution is not possible. Therefore, it is not possible to make 8 quarts of 85% bleach using 90% and 70% bleach.

The formula for the general term an of the sequence is :

an = (-1)^n * n / (n + 7)^2

To find a formula for the general term an of the sequence -1/64, 2/81, -3/100, 4/121, we need to analyze the pattern in both the numerators and the denominators. The given sequence is:

1. -1/64
2. 2/81
3. -3/100
4. 4/121

Observe the numerators: -1, 2, -3, 4. They follow an alternating sign pattern, starting with -1 and increasing in absolute value by 1 each term. This pattern can be represented as:

Numerator: (-1)^n * n

Now, examine the denominators: 64, 81, 100, 121. They are perfect squares and can be represented as:

64 = 8^2
81 = 9^2
100 = 10^2
121 = 11^2

Notice that the sequence of the bases (8, 9, 10, 11) increases by 1 each term. We can represent this as:

Denominator: (n + 7)^2

Combining the numerator and denominator patterns, we get the general term formula:

an = (-1)^n * n / (n + 7)^2

To learn more about sequences visit : https://brainly.com/question/7882626

#SPJ11

The correct answer is "98i; n = 77".

The function qt() in statistics is used to calculate the t-value for a given level of confidence and degrees of freedom.

In this case, qt(.98, df = 77) outputs the t-value for a 98% confidence interval with 77 degrees of freedom.

The t-value is used to calculate the margin of error for a confidence interval, which is used to estimate the population parameter based on the sample data.

For example, if you have a sample of size 78 and want to construct a 98% confidence interval for the population mean, you can use the t-value of qt(.98, df = 77) along with the sample mean and standard deviation to calculate the margin of error and construct the interval.

Therefore, the correct answer is "98i; n = 77".

To learn more about confidence visit:

https://brainly.com/question/29048041

#SPJ11

Answer: SA = 2π(1.4)² + 2.8ππ(4.20 square feet

Step-by-step explanation:

The formula for calculating surface is 2πr² + 2πr× height

The required answer is total cost = 77x + 61y

Yang should make 4 loads in the small truck and 3 loads in the large truck per day.

To minimize the total cost, we need to find the optimal number of loads that should be made in each truck per day. Let's assume that x loads should be made in the small truck and y loads should be made in the large truck.

The carrying capacity of the small truck is 40 cubic yards, so the total capacity of x loads in the small truck would be 40x. Similarly, the total capacity of y loads in the large truck would be 60y.

According to the problem, Yang must deliver a minimum of 240 cubic yards per day. Therefore, we have the following constraint:

40x + 60y ≥ 240

The union contract requires that the total number of loads per day is a minimum of 7. So, we have another constraint:

x + y ≥ 7

Now, let's calculate the cost per load for each truck:

Cost per load in the small truck = $77

Cost per load in the large truck = $61

The total cost for x loads in the small truck would be 77x, and the total cost for y loads in the large truck would be 61y. Therefore, the total cost would be:

Total cost = 77x + 61y

We need to minimize this total cost subject to the two constraints mentioned above. This is a linear programming problem that can be solved using a graphical method or the simplex method.

After solving the problem, we get the optimal solution as:

x = 4 loads in the small truck

y = 3 loads in the large truck
Therefore, to minimize the total cost, Yang should make 4 loads in the small truck and 3 loads in the large truck per day.

To minimize the total cost for Yang's Material Company while meeting the contract requirements, follow these steps:

1. Define the variables: Let x be the number of loads for the small truck, and y be the number of loads for the large truck.

2. Set up the constraints based on the given information:
  a. Capacity constraint: 40x + 60y >= 240 (to deliver at least 240 cubic yards per day)
  b. Load constraint: x + y >= 7 (at least 7 total loads per day due to the union contract)

3. Set up the objective function to minimize the total cost: Total Cost = 77x + 61y

4. Solve the system of inequalities to find the feasible region, and determine the corner points.

5. Evaluate the objective function at each corner point to find the minimum cost.

After solving, the minimum total cost occurs when 2 loads are made with the small truck (x=2) and 5 loads are made with the large truck (y=5).

To know more about  Yang's Material .Click on the link.

https://brainly.com/question/15655507

#SPJ11

dx/dt is equal to -10/3 when x=1 and y=-3. This can be answered by the concept of Differentiation.

To find dx/dt, we need to use implicit differentiation. Taking the derivative of both sides of y² + xy - 3x = 1 with respect to t, we get:

2y(dy/dt) + y(dx/dt) + x(dy/dt) - 3(dx/dt) = 0

Now we can substitute the values given in the problem: y = -3, dy/dt = 4, x = 1. Plugging these in, we get:

2(-3)(4) + (-3)(dx/dt) + 1(4) - 3(dx/dt) = 0

Simplifying, we get:

-24 - 3(dx/dt) + 4 - 3(dx/dt) = 0

-6(dx/dt) = 20

dx/dt = -20/6 = -10/3

Therefore, dx/dt is equal to -10/3 when x=1 and y=-3.

To learn more about Differentiation here:

brainly.com/question/24898810#

#SPJ11

The solution to the initial value problem y′=6cosx 2 with y(3π2)=5 is: y = 6sin(x) + 11. This can be answered by the concept of differential equation.

To solve the initial value problem y′=6cosx 2 with y(3π2)=5, we need to first integrate the given differential equation with respect to x to obtain the general solution.

Integrating y′=6cosx 2 with respect to x gives y = 6sin(x) + C, where C is the constant of integration.

Next, we use the initial condition y(3π2)=5 to find the value of C.

Substituting x = 3π2 and y = 5 into the equation y = 6sin(x) + C, we get:

5 = 6sin(3π/2) + C

5 = -6 + C

C = 11

Therefore, the solution to the initial value problem y′=6cosx 2 with y(3π2)=5 is:

y = 6sin(x) + 11

To learn more about differential equation here:

brainly.com/question/14620493#

#SPJ11

Hayley will travel from Telford Central to Shrewsbury in 0 hours and 21 minutes if she takes the quickest route.

Based on the timetable provided, the fastest option for Hayley to get from Telford Central to Shrewsbury is by taking the 0915 train from Wellington to Shrewsbury, which arrives at 0920. Therefore, the total time it will take her is 21 minutes (from 0805 departure of Wellington to 0920 arrival in Shrewsbury).

To convert 21 minutes to hours and minutes, divide 21 by 60 to get the decimal value of 0.35 hours. Then convert the decimal value to minutes by multiplying it by 60, which gives:

0.35 hours × 60 = 21 minutes

So, it will take Hayley 0 hours and 21 minutes to get from Telford Central to Shrewsbury taking the fastest option.

Find out more on time here: https://brainly.com/question/2854969

#SPJ1

Answer:

Step-by-step explanation:

1. The original amount in the savings account is represented by "a" in the function. Since there is no information provided on the value of "a," we cannot determine the original amount in the savings account.

2. The function shows that the savings account grows by a factor of 1.013 for each day that passes. To find the percent growth over a period of time, we can calculate the ratio of the final amount to the initial amount and express it as a percentage.

For example, if we want to calculate the percent growth over a year (365 days), we would use the following formula:

percent growth = (f(365) / f(0) - 1) x 100%

where f(0) represents the initial amount in the savings account and f(365) represents the amount after 365 days.

Using the function f(x) = 2000(1.013), we can calculate:

f(365) = 2000(1.013)^365 ≈ 2559.16

f(0) = 2000

percent growth = (2559.16 / 2000 - 1) x 100% ≈ 28%

Therefore, the savings account grows by approximately 28% per year.

3. To find the amount of money in the savings account on January 27th (the 27th day of the year), we can substitute x = 27 into the function:

f(27) = 2000(1.013)^27 ≈ 2043.54

Therefore, on January 27th, you would have approximately $2043.54 in your savings account.

This notation is often used in the analysis of algorithms to describe the worst-case time complexity of an algorithm in terms of the input size.

The statement f(x, y) is ω(g(x, y)) means that the function f(x, y) grows at a faster rate than the function g(x, y) as x and y approach infinity.

In other words, f(x, y) dominates g(x, y) in terms of growth.

f(x, y) represents the actual running time of the algorithm and g(x, y) represents the theoretical lower bound for the problem.

In other words, f(x, y) dominates g(x, y) in terms of growth, suggesting that the algorithm's worst-case time complexity is worse than the theoretical lower bound provided by g(x, y).

In the context of analyzing algorithms, the notation f(x, y) is ω(g(x, y)) is used to describe the relationship between the growth rates of two functions, f(x, y) and g(x, y), as x and y tend towards infinity.

To learn more about analysis of algorithms go to :

https://brainly.com/question/30586662#

#SPJ11

The directed graph of T on A has 7 vertices and 17 edges. The graph can be used to visualize the relations between the elements of A according to the given definition of T.

For more such question on graph

https://brainly.com/question/29538026

#SPJ11

To draw the directed graph of the relation T on set A, follow these steps:
1. Label 7 vertices with the elements of set A: {2, 3, 4, 5, 6, 7, 8}.
2. For each pair of vertices x and y, connect them with a directed edge if the condition T holds (i.e., 3 divides (x - y)).

 Based on the information given, the graph should look like this:
• Vertex 2 has a loop (connected to itself) and is connected to vertices 5 and 8.
• Vertex 3 has a loop and is connected to vertex 6.
• Vertex 4 has a loop and is connected to vertex 7.
• Vertex 5 is connected to vertices 2, has a loop, and is connected to vertex 8.
• Vertex 6 is connected to vertex 3 and has a loop.
• Vertex 7 is connected to vertex 4 and has a loop.
• Vertex 8 is connected to vertices 2, 5, and has a loop.
In summary, the directed graph for relation T on set A has 7 vertices, 17 edges, and follows the connections described above.

For more information on graph see:

https://brainly.com/question/17267403

#SPJ11

A 99.9% confidence interval for the population mean is (26.18, 51.22).

To construct the confidence interval, follow these steps:
1. Identify the sample mean (38.7) and sample standard deviation (14.9) from the given data.
2. Determine the sample size (n = 12) and the degrees of freedom (df = n-1 = 11).
3. Find the appropriate t-score for a 99.9% confidence level using a t-table or calculator (t = 4.695).
4. Calculate the standard error (SE) using the formula SE = sample standard deviation / √n, which is SE = 14.9 / √12 ≈ 4.3.
5. Multiply the t-score by the standard error: 4.695 × 4.3 ≈ 20.19.
6. Calculate the lower and upper bounds of the confidence interval: 38.7 - 20.19 = 26.18 and 38.7 + 20.19 = 51.22.

To know more about confidence interval  click on below link:

https://brainly.com/question/29680703#

#SPJ11

Answer:

- It lies inside an acute triangle

- It lies on a right triangle.

- It lies outside an obtuse triangle.

Answer:

see photo

Step-by-step explanation:

attached

The result of solving the equation ax - b = cy for 2 is x = (2 + b)/ (a + 0) or x = (2 + b)/a. This means that if we know the values of a, b, and c, we can find the value of x that satisfies the equation for a given value of cy (in this case, 2).

The given equation is:

ax - b = cy

To solve for 2, we substitute 2 for cy and simplify:

ax - b = 2

ax = 2 + b

x = (2 + b)/a

Since a + 0 = a, we can substitute a + 0 for a in the expression above:

x = (2 + b)/ (a + 0)

So, the result of solving the equation ax - b = cy for 2 is:

x = (2 + b)/ (a + 0) or x = (2 + b)/a

Learn more about equations.

brainly.com/question/27056029

#SPJ4

Answer:

Step-by-step explanation:

This is your position equation:

There's a whole lot of information in that equation, but what we are concerned about right now is the height of the ball after t = 3 seconds.  If this is the position of the ball at any time t, we will sub in 3 for t to find out where the ball is at 3 seconds.

which simplifies to

s(3) = -44.1 + 54 + 10 which is

s(3) = 19.9 meters

That's how high the ball is in the air at 3 seconds.