____ measures the _____ released when an isolated atom ______ an electron to form a _____ ion. ____ measures the ____ of the atom to hold on to its own electrons and attract electrons from other atoms in compounds. 1.ability2.1-3.1+4.heat5.potential6.gains7.energy8.loses9.The electronegativity10.Electron affinity

Taking into account the definition of molarity, the mass of solute present in 705 mL of 0.470M KBr is 39.43 grams.

Molarity is a measure of the concentration of a solute in a solution expressed in the number of moles dissolved per liter of solution. This is, the molarity indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by:

molarity= number of moles÷ volume

Molarity is expressed in units moles/L.

In this case, you know:

Replacing in the definition of molarity:

0.470 M= number of moles÷ 0.705 L

Solving:

0.470 M× 0.705 L= number of moles

0.33135 moles= number of moles

Being the molar mass of KBr 119 g/mole, the mass of the compound can be calculated as:

mass= molar mass× number of moles

mass= 119 g/mole× 0.33135 moles

mass= 39.43 grams

Finally, the mass of solute is 39.43 grams.

Learn more about molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1

The measured cell potential would be decreased to 0.01% if the salts are the conducting and spontaneous with a standard potential 0.59eV.

The potential difference between two half cells in an electrochemical cell is measured as the cell potential, or Ecell. The electrons ability to move from one half cell to the other is what causes the potential difference.

Due to the fact that the chemical reaction is a redox reaction, electrons can move between the electrodes. When one substance is reduced while another is oxidized, a redox reaction takes place.

As a result of losing one or more electrons during oxidation, the substance gains a positive charge. On the other hand, the substance picks up electrons during reduction and becomes negatively charged.

Cell potential = E-e

=2.18-4.19=-1.01eV

The difference between the potential for the reducing agent to become oxidized and the potential for the oxidizing agent to become reduced will determine the cell potential, which is relevant to the measurement of the cell potential.

A specific value can be assigned to the cell potential because the cell potential (Ecell) is measured in voltage (V).

Standard reduction potential =Ecell/2

=1.18/2=0.59eV

To study more about electrochemical cell -

https://brainly.com/question/12034258

#SPJ4

The every atom in H₂CO molecule has bond angle is 120 °. the bond angle HCH is 116 ° and The bond angle of H₂CO is 122°.

The H₂CO has trigonal planar molecular geometry. the H₂CO has the same electron geometry that is trigonal planar. The every atom atom attached to the central atom has bond angle is  120 °. the central atom is surrounded by three regions of the electron density. according to the VSEPR theory the molecular geometry is trigonal planar. The  H₂CO is the polar molecular. the hybridization is sp².

Thus, the bond angle in  H₂CO is 120 ° and the molecular geometry is trigonal planar.

To learn more about bond angle here

https://brainly.com/question/13782150

#SPJ4

the correctly describes the factor that lead to a ligand being strong field is [Co(en)3]^3+  .

Enable Complete Solution (Free)CN- is the right response.Major points.The strongest field ligand among the offered ligands is the CN- (negative) ligand, which has the highest value of.

So, we anticipate that the metal-ligand orbital overlap will be correlated with the ligand field strength.Thus, weak field ligands are anticipated for ligands that bind through highly electronegative atoms like O and halogens, whereas strong field ligands are often expected for ligands that bind through C or P.N-binding ligands have intermediate binding energies.

To know more about spectrochemical series visit:

https://brainly.com/question/28294176

#SPJ4

117 grams of NaCl are needed to prepare 0.500 L of a 4.00 M  NaCl solution.

needed to prepare 0.500 L

to find the molecular mass of NaCl from the periodic table.

The mass of Na is about 22.99 g and Cl is about 35.45 g.

The total mass of NaCl is 22.99 + 35.45 = 58.44 g.

Now we need to use the conversion factor from the definition of a mole : 1 mole NaCl = 58.44 g NaCl

We do not have moles yet so we need to find the moles from using molarity and 0.500L.

To find moles from molarity the equation is : moles = volume (L) x Molarity (moles/L)

So we substitute 0.500 L x 4 (moles/L) = 2 moles NaCl

Now we have moles and can convert them to grams :

2 moles x (58.44 g / 1 mole) = (2 x 58.44) / 1

116.88 grams NaCl

≅ 117 grams NaCl.

117 grams of NaCl are needed to prepare 0.500 L of a 4.00 M NaCl solution.

To learn more about molarity refer,

https://brainly.com/question/26873446

#SPJ1

The theoretical yield of the reaction between 6.20 g of carbon with excess oxygen is 22.7 g. The actual yield is given 8.35 g. Thus, the percent  yield is 36.7 %.

Percent yield of a reaction is the ratio of its actual yield to the theoretical yield multiplied by 100. The theoretical yield is calculated from the balanced chemical equation of the reaction.

One mole or 12 g of C gives one mole of carbon dioxide. Molar mass of CO₂ is 44 g/mol. Thus, the mass of carbon dioxide that can be produced from 6.20 g of C is :

= (6.20 × 44 ) / 12 g = 22.73 g.

The actual yield of CO₂ is 8.35g only. Thus, its percent yield is calculated as :

percent yield = 8.35 g/ 22.73 g × 100 = 36.7 %.

To find more on percent yield, refer here:

https://brainly.com/question/2506978

#SPJ1

Answer:

C

Explanation:

Answer:

H-Cl reperesents polar bond.

Explanation:

Because H and Cl atoms have diffrent dipole moment so they cannot cancel out each other.

Answer:

I think it means something thats very good

1. True – A set of p orbitals can accommodate a maximum of 6 electrons because each p orbital can contain 2 electrons with opposite spins.

2. False – There are only 5 d orbitals in a set, not 10. The d orbitals are divided into five distinct shapes: dz2, dx2-y2, dxz, dyz, and dxy.

3. True – None of the p orbitals are spherically symmetric because they have an elongated shape. This is due to the fact that they have an angular momentum of 1, whereas s orbitals have an angular momentum of 0.

4. True – The fifth shell (or major energy level) has one set of f orbitals which can accommodate a maximum of 14 electrons. The f orbitals are divided into seven distinct shapes: fz3, fxz2, fyz2, fx(x2-3y2), fy(3x2-y2), fxyz, and fx(x2-y2).

For more questions like Orbitals click the link below:

https://brainly.com/question/28772068

#SPJ4

Complete question:

1. a set of p orbitals can accommodate a maximum of 6 electrons.

2. there are 10 d orbitals in a set.

3. none of the p orbitals are spherically symmetric.

4. The fifth shell (or major energy level) has one set of f orbitals.

mark each statement as True or false

Clearly, the only factors that affect a substance's gaseous state at a given temperature are pressure, the number of molecules present, and its volume. The state parameters are P, V, n, and T.

Three state variables—absolute pressure (P), volume (V), and absolute temperature—define an ideal gas (T ). We must add a fourth variable, the amount of moles, to these three state variables.

Three characteristics of gases are as follows: They take up much more room than the liquids or solids they produce because they are (1) simple to compress, (2) expand to fill their containers, and (3) take up much more area.A good illustration of how easily gases can be compressed is an internal combustion engine.

Learn more about gas laws on:

https://brainly.com/question/13821925

#SPJ4

The volume of the CO₂ collected over water at 38.0 °C when a mixture of 55.5 g of citric acid and excess sodium bicarbonate is added to a tub of water is 24.9 L

First, we shall determine the number of mole of CO₂ obtained from the reaction. Details below:

C₆H₈O₇(s) + 3 NaHCO₃(s) + H₂O(l) → Na₃C₆H₅O₇(aq) + 4 H₂O(l) + 3 CO₂(g)

From the balanced equation above,

1 mole C₆H₈O₇ reacted to produce 3 mole of CO₂.

Therefore,

0.289 mole CaCO₃ will react to produce = 0.289 × 3 = 0.867 mole of CO₂.

Finally, we shall determine the volume of the CO₂ produced. This is illustrated below:

PV = nRT

Divide both sides by P

V = nRT / P

V = (0.867 × 0.0821 × 311) / 0.889

V = 24.9 L

Thus, the volume of CO₂ obtained is 24.9 L

Learn more about volume:

https://brainly.com/question/8476909

#SPJ1

The options B, C and D, are the statements that correctly describe van der Waals radii.

Van der Waals radii are an important concept in chemistry, as they provide insight into how atoms interact with one another. Put simply, van der Waals radii are the distance between two covalently bonded nuclei. These radii are used to determine how close any two molecules can approach each other, and this information is essential for understanding how atoms in a molecule interact and behave.

In general, van der Waals radii increase from left to right across a period in the periodic table. This means that atoms located on the left-hand side of the table have smaller radii than those located on the right-hand side. This is due to the fact that the number of electrons in each atom increases as you move across the period.

Additionally, the van der Waals radius for a given atom is always larger than its covalent radius. This is because the van der Waals radius takes into account the non-bonded interactions between atoms, which can be attractive or repulsive.

Learn more about Van der Waals radii:

https://brainly.com/question/17998146

#SPJ4

Yes, most definitely.

These regenerative brakes collect kinetic energy that normally dissipate as heat when the car slows down. The knee device collects energy lost when a person brakes the knee after swinging the leg forward to take a step, the researchers said.

I hope my answer helped you! If you need more information or help, comment down below and I will be sure to respond if I am online. Have a wonderful rest of your day!

Three resonant structures can be seen in the S2O Lewis structure. Within the molecule, double bonds may form as a result of the transfer of electron pairs from the outer sulfur and oxygen atoms. As a result, the stable S2O Lewis structure with no formal charges is formed.

The Octate rule does have three common exceptions, though: molecules with an odd number of electrons, such as NO; molecules like SF6 in which one or more atoms have more than eight electrons; molecules with one or more atoms that have fewer than eight electrons, such as BCl3.

Carbon monoxide's Lewis-dot structure is as follows:

C≡O:

To know more about Lewis structure visit:-

https://brainly.com/question/4144781

#SPJ4

The molecular formula of the given compound will be C₃H₅O₂Cl.

The empirical formula can be described as the simplest ratio of the number of different atoms in a compound. The molecular formula gives the actual number of each different atom of each element present in a molecule.

The molecular formula is generally a multiple of the empirical formula of a compound.

Given the molar mass of the compound is 108.5 g/mol

The empirical formula of the compound is C₃H₅O₂Cl.

The empirical formula mass = 12 × 3 + 5×1 + 2×16 + 35.5 = 108 g

Therefore, n = 108/108 = 1

The molecular formula = (C₃H₅O₂Cl)₁ = C₃H₅O₂Cl

Learn more about the empirical formula, here:

brainly.com/question/14044066

#SPJ1

ELISA (enzyme-linked immunosorbent assay) does not allow for rapid screening and quantification of the presence of antigen in a sample.

Enzyme linked immunosorbent assay is the immunosorbent test that is connected with enzymes. For identifying the antibody in the blood, a standard laboratory test is performed.

The body's immune system creates an antibody when it recognizes harmful substances which is also known as antigens. The most common assay for detecting or diagnosing viral infection or particularly infection with blood-borne viruses which includes HBV, HCV, HIV, and HTLV, is the enzyme linked immunosorbent assay (ELISA). The basis of ELISA testing is interaction of  antigen-antibody.

Learn more about ELISA from the link given below.

https://brainly.com/question/13252906

#SPJ4

Answer:one mole of NaCl weighs 58.44 g. A 2.5 M solution is 2.5 moles per liter (Molarity is just the number of moles per liter). Therefore, 0.5 L would contain 1.25 mol. Hence, you would need 1.25 × 58.44 g = 73 g.

Explanation:The formula for calculating a dilution is (C1) (V1) = (C2) (V2) where...

C1 is the concentration of the starting solution.

V1 is the volume of the starting solution.

C2 is the concentration of the final solution.

V2 is the volume of the final solution.

An excess demand will emerge if a minimum price is set below the equilibrium price. In the IPAD market, assuming everything else stays the same.

Federal milk marketing orders, interactions with the federal dairy price assistance program, and wholesale commodity prices for cheese, butter, nonfat dry milk, and dry whey all play a significant role in determining milk pricing at the farm level.

Demand for everyday items like milk declines as consumer incomes fall. A lower milk price will result in an increase in the supply of all goods containing milk as an ingredient.

To know more about equilibrium visit:-

https://brainly.com/question/28527601

#SPJ4

Transcription is said to be synthesis of RNA from DNA. Genetic information flows in the direction from DNA to proteins, the substances that give organisms shape. This information flow occurs through a cascade of processes of transcription (DNA to RNA) and translation (RNA to protein). Transcription occurs when a particular gene product is needed  at a particular time or in a particular tissue.

Normally only his one strand of DNA is copied during transcription. This is called the template strand, and the resulting RNA molecule is a single-stranded messenger RNA (mRNA). In eukaryotes (organisms with cell nuclei), the first transcript is called pre-mRNA. Pre-mRNAs are extensively edited by splicing before mature mRNAs are generated and ready for translation by ribosomes, organelles that serve as sites for protein synthesis. Transcription of any gene occurs at that gene's chromosomal location, which is a relatively short segment of the chromosome. Active transcription of a gene depends on the need for activity of that particular gene in a particular cell or tissue or at a particular time.

To know more about, transcription, visit:

https://brainly.com/question/14136689

#SPJ1

The complete question is as follows:

Below is shown the lac operon in a single possible situation. Study the figure carefully, then select what is expected to be occurring in terms of

(a) glucose concentration

(b) lactose concentration during this situation.

CAP + cAMP and inducer-repressor complex below operon

(c) transcription level

CAP site empty and inducer-repressor complex below operon

Cumene reacts at a faster rate when heated with N-Bromo succinimide and benzoyl peroxide in carbon tetrachloride.

When NBS and benzoyl peroxide in carbon tetrachloride reacts, they follow radical mechanism, which gives a bromination reaction and the position at which bromination occurs is benzylic position. cumene is an organic compound that contains a benzene ring with an isopropyl substituent and when reacts with chlorine forms the most stable carbocation and become most acidic. Now, the most radical formed due to reaction at benzylic position is only provided by cumene because it forms 3° radical i.e., tertiary carbocations which is more stable than secondary and primary cations.

Hence, cumene reacts at a faster rate.

Learn more about Cumene

brainly.com/question/13256102

#SPJ4

Phenol has a molecular weight of 94.11. The chemical name for phenol is C6H5OH, and it is an aromatic organic compound.

Equation:

step by step:

It is a volatile white crystalline substance. A phenyl group is joined to a hydroxyl group to form the molecule.

The total atomic weight of the atoms in the molecule makes up the molecular weight. Phenol has the chemical formula C6H5OH.

- The carbon atom's weight is 12.

Atomic weights of hydrogen and oxygen are 1 and 16, respectively.

The atomic weights of all the atoms that make up phenol are added, and the result is that phenol has a molecular weight of

=6(12)+5(1)+16+1 =94.11

Consequently, phenol has a molecular weight of 94.11.

To know more about molar mass, visit:

https://brainly.com/question/12127540

#SPJ1

To solve such this we must know the concept of chemical reaction. Therefore, the pressure of the dry gas alone is 1.27 atm. The dry gas is always collected in water.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

pressure of water vapor = 2.20 kPa=2,200Pa = 0.022 atm

pressure of water vapor + pressure of gas =1.3 atm

substituting all the given values in the above equation, we get

0.022 atm + pressure of gas =1.3 atm

pressure of gas = 1.3 - 0.022

                         = 1.27 atm

Therefore, the pressure of the dry gas alone is  1.27 atm.

Learn more about the chemical reactions, here:

brainly.com/question/3461108

#SPJ1

The anion name on the left with the name of the acid containing that anion on the right:

1) chloride Cl⁻ = hydrochloric acid

2) sulfite SO₃²⁻ =  sulfurous acid

3) sulphate SO₄²⁻ = hydro sulfuric acid

4) chlorite ClO₂⁻ = chlorous acid

1) chloride Cl⁻ = hydrochloric acid because the hydrochloric acid, HCl contain anion that is Cl⁻.

2) sulfite SO₃²⁻ =  sulfurous acid because the sulfurous acid H₂SO₃ that contains anion as  SO₃²⁻.

3) sulphate SO₄²⁻ = hydro sulfuric acid because the hydrosulfuric acid H₂SO₄ contains the anion as SO₄²⁻.

4) chlorite ClO₂⁻ = chlorous acid because the the chlorous acid , HClO₂ contains the anion as ClO₂⁻.

To learn more about acid here

https://brainly.com/question/12125396

#SPJ4

Answer: hahahaha okay this is the explanation:

Explanation:

To find the value of x in the empirical formula PbC₂Hx, we can use the percentage compositions of carbon and hydrogen to determine the mole ratios of C and H in the compound.

First, we need to convert the percentage compositions of C and H to mass compositions. To do this, we can divide the percentage compositions by the atomic masses of C and H:

C: 29.7% / 12.01 g/mol = 2.47 g C/mol C

H: 6.19% / 1.01 g/mol = 6.11 g H/mol H

Next, we can divide the mass compositions of C and H by their respective atomic masses to get the number of moles of C and H:

C: 2.47 g C / 12.01 g/mol = 0.206 mol C

H: 6.11 g H / 1.01 g/mol = 6.03 mol H

Since there are 2 moles of C and x moles of H in the compound, we can set up the following equation:

2 mol C / 0.206 mol C = x mol H / 6.03 mol H

Solving for x, we get:

x = 6.03 mol H * 2 mol C / 0.206 mol C

= 29.4 mol H

Since x represents the number of moles of H, the closest integer value is 29. Therefore, the value of x in the empirical formula PbC₂Hx is 29, and the correct answer is D) 20.

The importance of knowing chemical reactions to engineers is this information can be utilized to improve reactor design or operating circumstances such as feed flow rate and feed mix.

Breaking carbon-carbon bonds between the reactant molecules (particles) and creating new bonds between atoms in product particles are examples of chemical reactions (molecules). The number of atoms is the same before and after the chemical transition, but the number of molecules changes.

Therefore, chemical reactions are important to engineers because they can be used to improve reactor design or operating conditions such as feed flow rate and feed mix.

To learn more about chemical reactions, refer to the link:

https://brainly.com/question/20880185

#SPJ1

The amount of solution (g or mL) that contains each of the following amounts of solute is 11.56 grams.

What is amount of solute?

The amount of a solute that will dissolve in a specific amount of solvent to create a saturated solution is the solute's solubility.

The amount of solution is calculated as

[tex]% of m/m=\frac{x}{y} mass[/tex][tex]% of m/m= \frac{mass}{mass}[/tex]% of m/m= mass of LiNO3/mass of solution.100

mass of solution=mass of LiNO3/[tex]% of m/m=\frac{x}{y} mass[/tex][tex]% of m/m= \frac{mass}{mass}[/tex]% of m/m.100

Therefore, mass of solution is calculated as

= 5.2 grams.100/45%

= 11.56 grams Solution LiNO3.

Hence, the amount of solution (g or mL) that contains each of the following amounts of solute is 11.56 grams.

To learn more about amount of solute from the given link.
https://brainly.com/question/28905274
#SPJ1

The frequency of the given wave is equal to 6.32 × 10¹⁶ Hz.

The frequency of the wave can be defined as the number of cycles of a wave in one second. The S.I. units of frequency are per second (s⁻¹) or Hertz.

The wavelength can be defined as the distance between the two crests or troughs in phase with respect to each other.

The expression between wavelength, speed of light, and frequency (ν) is:

c = νλ

Given, the wavelength of the wave, ν = 4.75 ×10⁻⁹ m

The speed of light, [tex]c = 3 \times 10^8 m/s[/tex]

The frequency of the waves can be calculated from the above-mentioned relationship:

ν = c/λ = 3 × 10⁸/4.75 ×10⁻⁹  = 0.632 × 10¹⁷ = 6.32 × 10¹⁶

Therefore, the frequency of the wave is equal to  6.32 × 10¹⁶ Hz.

Learn more about wavelength and frequency, here:

brainly.com/question/18651058

#SPJ1

The expression for the pressure of an ideal gas by means of kinetic theory is P = J / V.

According to the kinetic theory, a gas is made up of numerous submicroscopic particles (atoms or molecules), all of which are moving randomly and continuously. The container's walls and the quickly moving particles constantly collide in this situation.

It should be noted that based on the information, the formula illustrated will be:

f² = u²+ v² + w²

p = mv

where P = momentum

m = mass

v = velocity

Time = Distance / Speed

Force = mass × velocity² / distance

Pressure = force / area

J = mn

P = J/V

where

J = total mass

V = total volume

p = density of gas.

Learn more about gas on:

brainly.com/question/25736513

#SPJ1

Answer: D

Explanation: Cause im always right

The product of the single displacement reaction between Al₂S₃ and Li are Li₂S₃ and Al because metals replaces metals.

Displacement reactions are those, in which one or two species are displaced from a reactant by the reagent. There are two types of displacement reactions namely single displacement and double displacement.

In single displacement reactions, one atom or group from a reactant is replaced by other group. In double displacement, two group of different reactants are exchanged each other.

The reaction between Al₂S₃ and Li is written below:

[tex]\rm Li + Al_{2}S_{3} \rightarrow Li_{2}S_{3} + 2 Al[/tex]

Here, metal Li replaces metal Al. Thus, option A is correct.

To find more on displacement reactions, refer here:

https://brainly.com/question/29307794

#SPJ1