It is true that material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.
What exactly does material requirement planning (MRP) entail?Calculating the materials and parts required to make a product is done using a system called material requirements planning (MRP). Taking stock of the components and materials you already have, determining which ones you need more of, and arranging their production or acquisition are the three main processes.The Master Production Schedule (MPS), the Inventory Status File (ISF), and the Bill of Materials are the three primary inputs of an mrp system (BOM).Material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.To learn more about Material requirements planning (mrp) refer to:
https://brainly.com/question/14969752
#SPJ4
A furnace is located next to a dense array of cryogenic fluid piping. The ice-covered piping approximates a plane surface an average temperature of T, = 0°C and an emissivity of E, = 0.6. The furnace wall has a temperature of T;= 200°C and an emissiv- ity of &r=0.9. To protect the refrigeration equipment and piping from excessive heat loading, reflective aluminum radiation shielding with an emissivity of Es = 0.1 is placed between the piping and the furnace wall, as shown in the schematic. Assume all surfaces are diffuse-gray. Dense piping array, T, = 0°C, Furnace wall T = 200°C, E = 0.9 P & = 0.6 000000000000
Installation criterion TIN < 30°C -Radiation shields, N Es = 0.1 If the temperature of the shield closest to the piping Ts, y must be less than 30°C, how many radiation shields, N, must be installed between the piping and the furnace wall?
Systems utilized in a variety of industrial applications that need for extremely low temperatures, often about -300°F (150°C) or below, are referred to as cryogenic pipes.
Austenitic stainless steel is used to build the stainless SEMIFLEX liquid nitrogen pipe, which is available in sealed and dynamic vacuum and offers the lowest cool down and steady state heat loss for improved thermal performance. Direct impingement with a cryogen, such as liquid nitrogen or carbon dioxide (CO2), allows cryogenic systems to quickly remove heat from the items being processed. CO2 is sprayed directly onto the product and is a consumable refrigerant. A stainless steel inner pipe and an outside stainless steel pipe make up vacuum jacketed pipe. The cryogenic liquid is transported through the inner pipe. It is covered with many layers of super insulation that are constructed by alternating between layers of a non-conductive spacer and a heat barrier.
To learn more about cryogenic pipes click the link below:
brainly.com/question/28384436
#SPJ4
engineers may issue subjective and partial statements if such statements are in writing and consistent with the best interests of their employers, clients, or the public..
A. True
B. False
The statement for engineers may issue subjective and partial statements if such statements are in writing and consistent with the best interest of their employers, clients, or the public is false.
Engineers is a profession that focus to solve technical problem or develop solution for the problem with applied science and mathematics theories and/or principles.
Science and mathematics theories and/or principles is based on the actual facts or objective. So, engineers must put objectivity in their work.
Engineers also objective and issue the full statement in order to give solution to their clients or public problem. If the statement is subjective or partial in any form including writing is wrong because it can't solve clients or public problem.
Learn more about engineers here:
brainly.com/question/7447774
#SPJ4
What are the three different methods of testing?
Answer: Unit, integration, and system testing.
scan millions of websites to identify individual webpages that contain a specific word or phrase and then attempt to rank the results from most useful to least useful
Search Engines scan millions of websites to identify individual web pages that contain a specific word or phrase and then attempt to rank the results from most useful to least useful.
For your content to show up in search results, search engines must first be able to see it.
In order to operate, search engines must do three essential tasks:
Crawling: Search the Internet for content while reading the code and content of each URL you come across.
Indexing: Archive and arrange the information gathered through the crawling operation. After being indexed, a page has a chance of responding to pertinent searches.
Ranking: Provide the material that best responds to a searcher's query; therefore, results are ranked from most to least pertinent.
To learn more about Websites click here:
brainly.com/question/15601340
#SPJ4
Consider a Couette flow with a pressure gradient. A plate, located a distance H above a solid wall, is moving with a velocity Ve. Furthermore, a constant pressure gradient, (dp/dx), is imposed in the x direction. It can be assumed that the plate and the wall extend to infinity. Assume incompressible steady flow of a Newtonian fluid with a constant viscosity u and neglect gravity. у (a) Determine the velocity profile in the fluid. (List the Plate assumptions and simplifications you make, and clearly show ►U which ones are used to drop terms in the governing H equations.) X (b) Find the non-zero components of the viscous stress throughout the fluid. wall (c) At what value of the pressure gradient, (dp/dx)a, is the shear stress at the plate equal to zero? (d) At what value of the pressure gradient, (dp/dx)p, is the shear stress at the wall equal to zero? (e) Make a neat qualitative sketch of the velocity profile for each of the following cases: i. (dp/dx) = 0 ii. (dp/dx) = (dp/dx)a iii. (dp/dx) = (dp/dx)}
(a) The velocity profile in the fluid or u is:
[tex]$$u=U_e\left(\frac{y}{H}\right)+\frac{1}{2 \mu}\left(\frac{\partial P}{\partial x}\right)\left(y^2-H y\right)$$[/tex]
(b) The value of the pressure gradient for which the shear stress on the wall is equal to zero is:
[tex]& \frac{\partial P}{\partial x}=\frac{-U_\theta \mu}{H\left(y-\frac{H}{2}\right)}\end{aligned}$$[/tex]
What is pressure gradient?The pressure gradient, which is a physical quantity used in atmospheric science to describe the direction and rate at which pressure rises most quickly around a specific location, is typically defined as being of air, but it can also more broadly refer to any fluid.
Pascals per meter (Pa/m) is a dimensional unit used to express the pressure gradient. The gradient of pressure as a function of position is what it is mathematically referred to as. The force density is the name for the negative gradient of pressure.
Pressure gradients in petroleum geology and petrochemical sciences pertaining to oil wells, and more specifically in hydrostatics, refer to the gradient of vertical pressure in a column of fluid within a wellbore and are typically expressed in pounds per square inch per foot (psi/ft).
Learn more about Pressure gradients
https://brainly.com/question/13383197
#SPJ4
Neo-luddites argue that the technologies such as computers, automobiles, internet etc. are necessary and they have made significant improvement in our life.
TRUE OR FALSE
Neo-luddites argue that the technologies such as computers, automobiles, internet etc. are necessary and they have made significant improvement in our life. [FALSE]
What is Neo-LudditeA Neo-Luddite is someone who believes that the use of technology has serious ethical, moral, and social ramifications. Operating under this belief, Neo-Luddites are critical of technology and cautious to promote its early adoption. While they are not necessarily opposed to technology, they would prefer to see a more serious discussion of the role of technology in society. Some Neo-Luddites actually dislike technology, opting for a life of "voluntary simplicity," but this is not always the case.
The term "Luddite" comes from a political movement during the Industrial Revolution. The Luddites disliked the spread of mechanical devices such as mechanized looms to accomplish tasks which were formerly performed by people. They held marches, destroyed factories, and engaged in other types of activism in an attempt to prevent further technological development. Ultimately, the Luddites were unsuccessful, but when people started to question technology in large numbers again in the 1970s, they revived the concept, calling themselves the "New Luddites," and the Neo-Luddite movement was born.
t necessarily refer to themselves as Neo-Luddites, although some do. Instead, it is often used in a deprecating way by advocates of technology, to suggest that the thinking of Neo-Luddites is outdated and outmoded. The fantastic failure of the original Luddite movement is sometimes cited as an argument that opposition to technology is ultimately fruitless.
Learn more about Neo-luddites at https://brainly.com/question/29534867.
#SPJ4
Let P(x) and Q(x) be predicates and suppose D is the domain of x. For the statement forms in each pair, determine whether (a) they have the same truth value for every choice of P(x), Q(x), and D, or (b) there is a choice of P(x), Q(x), and D for which they have opposite truth values.
Answer:
just use the formal man .
you are the network administrator for a small consulting firm. the firm has recently rolled out a new intranet site, and you are responsible for configuring the dns.you are able to connect to the intranet site by using the ip address, but you cannot connect by using the hostname.which of the following do you need to configure to access the site with the hostname?
You need to configure a DNS A record for the intranet site's hostname to map it to the correct IP address.
What is DNS?
DNS, or Domain Name System, is an internet protocol used to translate domain names, such as www.example.com, into IP addresses, such as 192.168.2.1, that computers can understand and use to communicate with each other. DNS acts as a directory service, providing a link between domain names and their associated IP addresses, which are stored and managed in a distributed database system. DNS is essential for the functioning of the internet, allowing users to access websites and services without having to remember their numerical IP addresses. DNS works by querying a distributed network of DNS servers, which maintain a database of IP addresses and their corresponding domain names. When a DNS query is made, the DNS server looks up the requested IP address in its database and returns it to the user. DNS is an important part of the internet infrastructure and is used by many different types of services, such as email, web hosting, and streaming services.
To learn more about DNS
https://brainly.com/question/29602856
#SPJ1
The ______ must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
Note that the outrigger must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
What is an outrigger and what is it used for?An outrigger is a device that is used to provide stability and support for a structure or vehicle. It consists of a beam or frame that extends horizontally from the main body of the structure or vehicle, usually supported by one or more additional beams or poles that are attached to the ground or other surfaces.
An outrigger or double-hull watercraft produces stability owing to the distance between its hulls rather than the form of each individual hull, as opposed to a single-hulled vessel.
Outriggers are used for a number of purposes, including:
Outriggers are commonly used on boats and ships to give additional stability and support, especially in strong seas.Cranes utilize outriggers to assist balance the cargo being hoisted and keep the crane from tipping over.Outriggers are employed on a variety of construction equipment, including excavators and bulldozers, to offer stability when working on uneven terrain.Learn more about outrigger:
https://brainly.com/question/23653582
#SPJ1
during the capture stage of the data life cycle, a data analyst may use spreadsheets to aggregate data.
During the capture stage of the data life cycle, a data analyst may use spreadsheets to aggregate data: False.
What is DLC?In Computer technology, DLC is an abbreviation for data life cycle and it can be defined as a strategic methodology that defines the sequence of stages that a given unit of data goes through from inception (collection) to its eventual deletion (destruction) at the end of its useful life.
In Computer technology, there are six (6) steps in a data life cycle and these include the following:
PlanCaptureManageAnalyzeArchiveDestroyDuring the analyze stage of the data life cycle, a spreadsheet application may be used by a data analyst in order to aggregate data.
Read more on data life cycle here: brainly.com/question/28039445
#SPJ1
Complete Question:
During the capture stage of the data life cycle, a data analyst may use spreadsheets to aggregate data. True or False.
which is one of the best structures for holding oil? group of answer choices anticline syncline normal fault reverse fault
An "anticlinal" trap is one of the most effective structures for forming a petroleum reservoir. An impermeable layer of rock forms a cap over a layer of porous permeable sedimentary rock in this location. If petroleum is present, it drifts upward and becomes trapped within the anticline fold.
What is a anticlinal trap structure?
An anticline is the structural-trap formed by the rock strata folding into an arch-like shape. The rock layers in an anticlinal trap were originally laid down horizontally before folding into an arch-like shape known as an anticline due to earth movement.
This type of structure can be seen on a seismic section, but because seismic sections are typically 'time sections,' the actual structure can be obscured by velocity changes above the anticline. The structural contours of an anticline form closed loops.
To know more about seismic section, visit: https://brainly.com/question/28900452
#SPJ4
the video discusses four potential models of how the expansion of the universe changes with time. drag the correct model description from the left-hand column to the appropriate blank in the sentences in the right-hand column. use each term only once.
The coasting model assumes that the expansion rate of the universe always stays the same.
All four models predict that the universe is expanding today.
The recollapsing model predicts that the universe will someday contract.
The critical model predicts that the average density of mass in the universe is exactly the critical density.
The accelerating model predicts that the universe is expanding faster now than it was in the distant past.
What is the model about?This type of thinking can be practiced using a critical thinking model. It provides guidelines for asking the right questions, coming to logical conclusions, and explaining how we did it all while assisting us in recognizing our own thinking biases and enabling us to attempt viewing the world objectively.
An acceleration model is a type of model that forecasts time-to-failure as a function of operating stresses. Models of physics or kinetics that describe the failure mechanism are frequently used to create acceleration models. Acceleration models typically draw their foundation from the physics or chemistry of a specific failure mechanism.
Learn more about model on:
https://brainly.com/question/17764105
#SPJ1
malizegrades that receives a row array of test scores of arbitrary length and positive values, and produces two outputs
Normalize Grades:
function [norm Scores, average] = normalize Grades(scores)
m=max(scores);
norm Scores=(scores./m)*100;
average=mean(norm Scores);
end
scores = [90, 45,76,21,85,97,91,84,79,67];
[norm Scores, average] = normalize Grades(scores)
Calculate the average of the normalized scores by scaling the provided scores to a linear scale from 0 to 100. Find the highest score among the provided scores, then use that value to normalize each score between 0 and 100. Utilize mean to determine the normalized score average. Analyze the data set. It makes sense to "normalize" scores in order to make them fit under a normal curve if you assume that they should. Additionally, for conformity's sake, very high scores must be reduced downward during normalization. In either case, some information is lost and data are corrupted. Since grades may be given based on how far above or below 0 each final Z-score ends up after normalization, this approach substantially simplifies both determining one's relative standing in the class and assigning grades.
Learn more about Normalize Grades here
https://brainly.com/question/27900432
#SPJ4
a building is considered green from an environmental standpoint for all the following reasons except: A. IT WAS PAINTED USING A VOLATILE ORGANIC COMPOUNDS (VOC) -BASED GREEN PAINT. B. IT IS MORE ENERGY EFFICIENT THAN CONVENTIONAL HOMES. C. IT MINIMIZES THE RELEASE OF TOXIC SUBSTANCES D. IT IS CONSTRUCTED WITH MOSTLY RECYCLABLE MATERIALS
All of the following, with the exception of option a, qualify a building as green from an environmental perspective: it was painted with a volatile organic compound (VOC) based - green paint.
What environmental benefits may green buildings provide?Green neighborhoods and structures promote the creation and maintenance of vegetated land and roof surfaces as well as the reduction of waste disposed of in landfills. High-performing green buildings, especially those that have earned the LEED certification, provide a way to decrease the impact of both residents and buildings on the environment.
What are the top 5 green building products?Green construction techniques
Stone. Living in a stone building is low maintenance and environmentally friendly, and any leftover stone from the construction may be used to finish the home with countertops or tile.
Cob, bamboo, cork, adobe brick, straw bales, cordwood, and earth bags are some examples of building materials.
To know more about organic compounds visit:
https://brainly.com/question/5994723
#SPJ1
Identify the true statement for the given 3-bit shift-right and load register if Dis 011, shr_in is 1, shr is 1. Id is o, and Q is 010. Consider arising clock edge. shr_in D shr ld 3-bit shift-right/load register O I. The present value is shifted: therefore, Q becomes 101 O II. The present value is shifted; therefore, Q becomes 111 O III. The present value of D is loaded into Q: thus, Q becomes 011 O IV. The present value of Q is maintained; therefore, Q remains 010
A 0 is added on the other end and the least-significant bit is lost when shifting right using a logical right shift. A single logical right shift divides a positive number by 2, discarding any remainders, for positive values.
The right shift (>>) operator returns the signed integer represented by the outcome of executing a sign-extending shift to the right by the number of bits provided in the second operand, modulo 32, of the binary representation of the first operand (evaluated as a two's complement bit string). The result will be 14 / 4 = 3 if I move the number 14 by two positions to the right. Since it's an integer, i.e. 14/4 = 3.5, the fractional component will not be taken into account. Generally speaking, the result of shifting a number n times to the right will equal number / (2n). The shift-bit expression's pattern is moved to the right by the amount supplied by additive-expression when using the right-shift operator.
To learn more about single logical click the link below:
brainly.com/question/28713173
#SPJ4
A ramjet has a constant-diameter combustion chamber followed by a nozzle whose throat diameter is 0.94 times the chamber diameter. Air enters the combustion chamber with T, 1450 K and M-0.3. How high may the temperature rise in the combustion chamber without necessarily changing the chamber inlet conditions? For simplicity, neglect frictional losses in the chamber and nozzles and assume that the working fluid has a specific heat ratio of 1.333.
The temperature of the air passing through the combustion chamber may increase to 2567 K. The amount of temperature increase will depend on the expansion ratio of the nozzle, as well as the specific heat ratio of the working fluid.
The temperature rise in a ramjet's combustion chamber is determined by the ratio of the area at the throat of the nozzle to the area of the inlet to the combustion chamber. The temperature of the air entering the combustion chamber will remain constant as long as the inlet conditions remain the same. However, the temperature of the air will increase as it passes through the combustion chamber and expands in the nozzle, resulting in an increase in temperature.
The maximum temperature increase in the combustion chamber can be calculated using the following formula:
Tmax = Tin x (gammaⁿ)
Where
Tmax = the maximum temperature increase in the combustion chamber. Tin = the inlet temperature of the air entering the chamber.
Gamma = the specific heat ratio of the working fluid.
n = the expansion ratio of the nozzle.
In the given example, the maximum temperature increase in the combustion chamber would be calculated as follows:
Tmax = 1450 K x (1.333²) = 2567 K.
Learn more about temperature, here https://brainly.com/question/11464844
#SPJ4
Robots can be classified into five groups. The code used for these classifications consists of a set of _____ letters, which refer to types of robot joints.
The code used for robots classifications consists of a set of three letters.
What is robots classifications?Robot classifications is classification for robot depend on their function and capabilities.
Autonomous Mobile Robots (AMRs) is first classification of robot for robot that have limited human intervention or input and can move mobile freely with calculation to make decision in near real-time.
Automated Guided Vehicles (AGVs) is second classification of robot for robot like AMRs but need more human input for deciding their paths so it can't move freely.
Articulated Robots is third classification of robot for robot that can emulated human body parts and their function.
Humanoids is next classification of robot for robot that have form like human and human center oriented. It is similar to AMRs except to their form that like human.
Cobots is last classification of robot for robot that must have human input to perform, this robot can't autonomous to perform but it will help human to complete their task.
Learn more about robot here:
brainly.com/question/27571415
#SPJ4
Is there a way to know whether the model I downloaded is made using a pirated copy of Solidworks/ Autodesk Etc?
Answer:
NO
Explanation:
No, there is no way to know if the model you downloaded was made using a pirated copy of Solidworks or Autodesk. It is possible to download free models from legitimate sources such as 3D Warehouse, but it is also possible to download models from sites that are known to host pirated models. The only way to be sure that you are downloading a legitimate model is to purchase it from an authorized source.
if you need to weld two pieces of aisi 1018 cd steel together, what will be the yield strength of the steel in the vicinity of the weld in units of kpsi?
if you need to weld two pieces of AISI 1018 cd steel together, the yield strength of the steel in the vicinity of the weld will be 64 kpsi.
What is yield strength?Yield strength is a measure of the maximum stress that a material can withstand without deforming. It is a practical approximation of the elastic limit and is defined as the stress at which a material exhibits a specified permanent deformation.
Yield strength is critical in structural engineering. When designing a component, for example, it must support the force incurred during use and must not deform plastically. To put it another way, a material with adequate yield strength should be chosen.
The yield strength is often used to calculate the maximum permissible load in a mechanical part because it represents the upper limit to forces that can be applied without causing permanent deformation. A variety of yield criteria for various materials have been established.
Learn more about yield strength
https://brainly.com/question/13259307
#SPJ4
a breakwater along an oceanfront is to be constructed of concrete, and the formwork for retaining the concrete while it is poured is shown. for every 6 ft of width (into the plane of the figure), the formwork has a horizontal support bc and a support df. the stakes at points a, e, and f may be modeled as pins, and the weights of all members except the concrete may be neglected.
NOTE: This is a muiti-part question. Once an answer is submitted, you will be unable to return to this part.
If the concrete is modeled as a fluid with
180lb/ft3 specific weight, determine the force supported by members BC and DF
The force supported by the member
BC is ...........lb. (Round the final answer to four decimal places.) The force supported by the member DF is ..........lb.
An extensive presentation covering the overall concept of formwork, the numerous types, the most recent developments, and a comparison of traditional and modern formwork.
It also covers the analysis of formwork failure factors and safety precautions to be implemented to avoid failure. Structures under dead loads experience consistent weight over time. The self-weight of structural components including walls, plaster, ceilings, floors, beams, columns, and roofs is one of them. Dead loads also comprise the weight of any fixtures that are affixed to the building system permanently. Members are initially scaled based on architectural drawings and other pertinent documents before being analyzed and designed, and their weights are calculated using the data included in the majority of codes.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
two mod-10 synchronous counters are cascaded together. if the input clock frequency is 100 khz, what is the output frequency of the second counter?
The Large counter applications requiring several stages of cascaded counters include digital time clocks, frequency dividers, and synchronization circuits.
Explain about counter?In the beginning, a Counter is a digital sequential logic device that, in response to an input pulse, will cycle through a predetermined state (for instance, counting up and down). Every computer and electronic system makes use of them.This is a basic explanation, but it's important since, as we all know, the culture of computers and electronics is expanding in today's society. The only language that computers can understand is binary, and counters operate using binary codes. Decide whether time is lagging or ahead is the counter's primary function. We can distinguish between an LED flashing and continuing to light it by setting the counter in any electronics circuit to a desired frequency.Since the digital world is used to create many types of counters, we never even consider it without one.To learn more about counter refer to:
https://brainly.com/question/26000993
#SPJ4
technician a says that if the pcv valve were defective or clogged, the engine could idle rough. technician b says that the engine may stall. which technician is correct?
Neither technician A nor B. The engine could idle poorly if the pcv valve were broken or clogged, according to mechanic A. The engine may stall, explains mechanic B.
The PCV valve prevents air and fuel from the crankcase from escaping into the atmosphere by rerouting them through the intake manifold to the cylinders. Your car will perform poorly as the PCV valve begins to malfunction. The engine may stall out or there may be a buildup of pressure in the exhaust as a sign of this. The malfunctioning PCV valve may not completely close, allowing oxygen to enter the combustion chamber. The PCV valve is unquestionably one of the most crucial components of your car, and while it is technically possible to drive your car with a damaged valve, it is not advised because it will eventually corrode the engine.
Learn more about pcv valve here
https://brainly.com/question/23860109
#SPJ4
when hammer test is preferable than concrete cubic test?
Answer:
Rebound Hammer test is a Non-destructive testing method of concrete which provide a convenient and rapid indication of the compressive strength of the concrete. The rebound hammer is also called as Schmidt hammer that consist of a spring controlled mass that slides on a plunger within a tubular housing.
The operation of rebound hammer is shown in the fig.1. When the plunger of rebound hammer is pressed against the surface of concrete, a spring controlled mass with a constant energy is made to hit concrete surface to rebound back. The extent of rebound, which is a measure of surface hardness, is measured on a graduated scale. This measured value is designated as Rebound Number (rebound index). A concrete with low strength and low stiffness will absorb more energy to yield in a lower rebound value.
when assembling a steel-lattice tower, what two references are needed to determine the location of each individual piece of steel?
To locate each individual piece of steel, we need to know the locations of the two references:
1. Detailed engineering drawings that specify the exact location, size, and shape of each piece of steel.
2. Structural calculations that define the force and stress requirements of each piece of steel.
What is steel?
Steel is a strong and durable metal alloy composed of iron and carbon. It is one of the most widely used metals in the world, with applications spanning from construction and architecture to industrial machinery and vehicles. Steel is also one of the most recycled materials in the world and can be reused in various ways. Steel is often used in construction due to its high strength-to-weight ratio, its ability to withstand strong forces and its resistance to corrosion. It can be formed into a variety of shapes and sizes, allowing for its use in everything from bridges and skyscrapers to cars and ships. Steel is also known for its malleability, allowing for it to be bent and molded into a variety of shapes and sizes. Steel is also ideal for use in heavy machinery and automobiles due to its strength and durability. Steel is also used to make a variety of everyday items such as cutlery, kitchen utensils, and tools. Steel is also widely used in the production of food cans, containers, and other packaging materials.
To learn more about steel
https://brainly.com/question/28782967
#SPJ4
the repetition structures we have discussed this week can be used interchangeably; however, there are a few occasions when one is clearly preferable to another. discuss, in detail as well as illustrate with an example, how to determine which structure to use when there is no clear indication. additionally, how much of the choice should be based on personal preference and how much on conventional practices?
When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized.
Numerous programming tasks are monotonous and rarely differ from one another. Counting and accumulating running totals, repeatedly accepting input data, and recalculating output values that only stop upon entry of a designated value are a few examples of such repetition. Another is the continuous checking of user data entries until an acceptable entry, such as a valid password, is made. Depending on the loop termination criterion, these repetition control structures can be used to repeatedly run the statements in the loop body.
Learn more about input here-
https://brainly.com/question/24179864
#SPJ4
current attempt in progress a cylindrical radiation shield is placed around a hot cylinder in cold surroundings as shown below. the statement that is correct about the heat rate from the cylinder to the surroundings is: if the shield is a blackbody, then the heat rate is the same regardless of the shield diameter. if the shield is a blackbody, then the heat rate is the same as if there were no shield. if the emissivity of the inside of the shield is increased, then the heat rate will increase. etextbook and media save for laterattempts: 0 of 2 usedsubmit answer
High reflectivity and low emissivity should be characteristics of the radiator shields. The best material for radiation protection is lead metal.
The interaction of particles with matter through collisions and atom capture can be characterized as radiation shielding. In steel, a neutron with an energy of 1 Mev travels 4 cm on average between two impacts. Elements with a high atomic number and high density, like lead, provide the strongest protection against ionizing radiation, such as gamma rays. Very energetic beta particles can enter the body through the skin and travel up to half an inch. With less than an inch of material, such as plastic, they can be protected. The outer layer of clothing can function as an effective shield in the event of beta particles with lesser energy.
Learn more about radiator here-
https://brainly.com/question/13354345
#SPJ4
classical conditioning is the study of behaviors that are____ , whereas operant conditioning studies behaviors that are____
Operant conditioning examines proactive behaviour, whereas classical conditioning examines reactive behaviour.
That is what type of an operant is it?A rat clicking its lever with response to food, an infant screaming in relation to maternal care, or small talk in response to the social engagement are all examples of operant responses.
What is the operant concept?Operant conditioning is based on the fundamental idea that a sensory antecedent somehow triggers an action, which in turn triggers a result. This kind of training makes use of primary, supplementary, and generalised reinforcers—both positive and negative. Food, shelter, and/or water are the 3 main reinforcers.
To know more about Operant visit :
https://brainly.com/question/13144439
#SPJ1
Problem 1 (20 points) The beam
ABC
is subjected to a point load at the middle of segment
AB
and a uniformly distributed load at the segment
BC
, as shown in the figure. a) Find the equation of the elastic curve for the segment
AB
. b) Find the maximum absolute value of the deflection between the supports
A
and
B
c) Find the deflection at the middle of the segment
AB
d) Find the deflection at point C. Set
w 0 =3 N/m,L=2 m,EI=25000Nm^2
. Use the method of superposition for all parts. Hint: for
x>L/2
in segment
AB
, the solution can be obtained from the table by replacing
x
by
L−x
.
To solve this problem, use the superposition method, the total deflection at any point is the sum of the deflections due to the individual loads acting at that point.
a. we need to find the elastic curve equation for segment AB. This can be done by solving for beam deflection due to a point load in the middle of segment AB.
The beam deflection under a point load at distance x from the left support is given by
δ(x) = (w0x^2)/(24EI)
where w0 is the point load, E is the modulus of elasticity of the beam, and I is the moment of inertia of the beam.
Inserting the given value will result in:
δ(x) = (3x^2)/(2425000) = x^2/2000
This is the elastic curve equation for segment AB, as there is a point load in the middle of the segment. For part (b), we need to find the maximum absolute value of deflection between supports A and B. The deflection due to a point load is symmetrical about the midpoint of the segment, so the maximum absolute deflection occurs at the midpoint. Substituting x=L/2=1 into the equation for the elastic curve gives:
δ(x) = (1^2)/2000 = 0.0005m
This is the maximum absolute deflection between supports A and B.
In part (c) we need to find the deflection in the middle of segment AB. Substituting x=L/2=1 into the equation for the elastic curve gives:
δ(x) = (1^2)/2000 = 0.0005m
This is the deflection in the middle of segment AB. In part (d) we need to find the deflection at point C. To do this, solve for the beam deflection due to the evenly distributed load on segment BC and add it to the deflection due to the point load at the middle of segment AB.
b. The deflection of a beam under a uniformly distributed load w per unit length is given by
δ(x) = (wx^3)/(48EI)
Inserting the given value will result in:
δ(x) = (3x^3)/(4825000) = x^3/3200
This is the equation for the elastic curve of segment BC as the load is evenly distributed.
c. To find the deflection at point C, we need to substitute x=L=2 into the elastic curve equation. This will tell you:
δ(x) = (2^3)/3200 = 0.00125m
d. To find the total deflection at point C, the deflection due to the point load at the center of section AB must be added to the deflection due to the evenly distributed load in section BC. Substituting x=L/2=1 into the equation for elastic curve due to point load, we get:
δ(x) = (1^2)/2000 = 0.0005m
Learn more about this on brainly.com/question/1288793
#SPJ4
a(n) ____ is any numeric variable you use to count the number of times an event has occurred.
It is incremented each time the event happens, providing a count of the number of times the event has happened.
Using Counters to Track Frequency of EventsA counter is a useful tool for tracking the frequency of events. By incrementing the counter each time the event occurs, it provides a numerical value that can be used to measure the number of times the event has occurred. Counters can be used to track a wide range of events, from the number of visitors to a website, to the number of times a certain keyword is used in a document. They are also useful for measuring patterns of behavior, as the counter can be set to reset at specific intervals to measure how often the event occurs over time.
Learn more about counters: https://brainly.com/question/1581078
#SPJ4
The dresser has a weight of 80 lb and is pushed along thefloor. If the coefficient of static friction at Aand B is μs = 0.3 and thecoefficient of kinetic friction is μk =0.2, determine the smallest horizontal force P needed tocause motion. If this force is increased slightly, determinethe acceleration of the dresser. Also, what are the normalreactions at A and B when it begins to move?
The normal reactions at A and B when the dresser begins to move will be:
Normal Reaction at A = μs * mg = 0.3 * (80 lb) * 32.2 ft/s² = 96.6 lb
Normal Reaction at B = μk * mg = 0.2 * (80 lb) * 32.2 ft/s² = 64.4 lb
What is reaction?
Reaction is an action taken in response to a particular stimulus. It is the way in which people interact with the world around them. Reactions can be physical, mental, or emotional in nature. It is the way in which individuals respond to situations, people, and events. Reactions can range from positive to negative, and can even be neutral. Reactions are affected by a person's past experiences, beliefs, values, and emotional state. It is also influenced by external factors such as the environment, other people, and media. Reactions are an important part of social interaction and communication, as they provide feedback and help build relationships. They also provide insight into a person's personality, character, and values. Reactions are the building blocks of relationships, and it's important to be aware of how one's reactions affect others.
The smallest horizontal force P needed to cause motion is:
P = μs * mg = 0.3 * (80 lb) * 32.2 ft/s² = 96.6 lb
When the force is increased slightly, the acceleration of the dresser will be:
a = (P - μk * mg) / m = (96.6 - 0.2 * (80 lb) * 32.2 ft/s²) / (80 lb) = 7.7 ft/s²
The normal reactions at A and B when the dresser begins to move will be:
Normal Reaction at A = μs * mg = 0.3 * (80 lb) * 32.2 ft/s² = 96.6 lb
Normal Reaction at B = μk * mg = 0.2 * (80 lb) * 32.2 ft/s² = 64.4 lb
To learn more about reaction
https://brainly.com/question/19260256
#SPJ1