Answer:
Explanation:
When the wavelength becomes larger the amplitude of the wave becomes shorter. This is the reason when a Tsunami occurred less damage to the ships in deep sea.
Predict how the upward force exerted on the feet by the scale will compare to the weight if the elevator is accelerating downward.
When an elevator is accelerating downward, the upward force exerted by the scale on the feet, also known as the normal force (N), will be less than the person's weight (W).
If the elevator is accelerating downward, the force exerted on the feet by the scale will be less than the weight. This is because the force of gravity acting on the person remains constant, but the elevator is now providing an additional downward force due to its acceleration.
This means that the net force acting on the person is less, resulting in a lower reading on the scale. In other words, the scale measures the normal force acting on an object, which is equal to its weight when at rest or moving with a constant velocity, but can be less or more than the weight when accelerating up or down.
When an elevator is accelerating downward, the upward force exerted by the scale on the feet, also known as the normal force (N), will be less than the person's weight (W). This is because the downward acceleration (a) causes a net force in the downward direction, leading to a reduced normal force. To better understand this, you can refer to the following equation: N = W - ma
In this equation, W is the weight of the person, m is their mass, and a is the downward acceleration. As you can see, the normal force will be less than the weight due to the subtracted term (ma).
Visit here to learn more about constant velocity : https://brainly.com/question/24909693
#SPJ11
30) Approximately how long does it take the Sun to orbit the Milky Way Galaxy? A) 23,000 years B) 230,000 years C) 2.3 million years D) 230 million years E) 23 billion years
The Sun, along with the rest of the solar system, takes approximately 230 million years to complete one orbit around the Milky Way Galaxy.
This is a long period of time in comparison to our human lifespan, and it shows the vastness of our universe. The Milky Way Galaxy is estimated to be around 100,000 light-years in diameter, and it contains around 100-400 billion stars. The Sun is located about 25,000 light-years away from the center of the galaxy, and it is part of a spiral arm called the Orion Arm. As the Sun orbits the galaxy, it also moves up and down through the disk due to the gravitational influence of nearby stars and dark matter. This complex motion is known as the galactic tide. The study of galactic astronomy is an exciting field that helps us understand the structure and evolution of our Milky Way Galaxy, as well as other galaxies in the universe.
learn more about galaxy here
https://brainly.com/question/12532606
#SPJ11
3. What is the magnitude of the impedance in Ω of a 0.50 μF capacitor at a frequency of 10.0 kHz
The magnitude of the impedance in Ω of a 0.50 μF capacitor at a frequency of 10.0 kHz can be calculated using the formula Z = 1/(2πfC), where Z is the impedance, f is the frequency in Hz, and C is the capacitance in Farads.
Plugging in the given values, we get:
Z = 1/(2π x 10,000 x 0.50 x 10^-6)
Z = 31.83 Ω (rounded to two decimal places)
Therefore, the magnitude of the impedance of a 0.50 μF capacitor at a frequency of 10.0 kHz is approximately 31.83 Ω. Magnitude is a word used to indicate something's magnitude or scope. It may be used to describe a variety of characteristics, including the actual size of an item, the quantity or intensity of a certain attribute or phenomena, or the significance or influence of a specific event or concept. Magnitude may be measured using a variety of scientific tools or procedures depending on the situation and is frequently stated quantitatively, for example, in terms of length, mass, volume, or strength. A sense of size, significance, or importance is often implied by the phrase magnitude, which is frequently used in disciplines including physics, astronomy, geology, and mathematics.
Learn more about magnitude here:
https://brainly.com/question/29766788
#SPJ11
a canon on rollers fires a canon ball and rolls backward. which of the following are true statements?multiple select question.the momentum of the canon is greater than the canon ball's momentum.the momentums of the canon and canon ball are equal.the speeds of the canon and canon ball are equalthe speed of the canon ball is greater than the canon's speed.the speed of the canon is greater than the canon ball's speed.the momentum of the canon ball is greater than the canon's momentum.
The momentums of the canon and canon ball are equal. The speed of the canon ball is greater than the canon's speed. The momentum of the canon ball is greater than the canon's momentum.
Based on the scenario provided, the following statements are true:
1. The momentums of the canon and canon ball are equal. (According to the law of conservation of momentum, the total momentum before firing is equal to the total momentum after firing. Since the canon and canon ball move in opposite directions, their momentums are equal but opposite in direction.)
2. The speed of the canon ball is greater than the canon's speed. (Typically, the mass of the canon ball is much smaller than the mass of the canon. As their momentums are equal, the canon ball will have a higher speed compared to the canon.)
To learn more about law of conservation of momentum click here
brainly.com/question/17140635
#SPJ11
in the electroplating of nickel, 0.200 faraday of electrical charge is passed through a solution of niso4. what mass of nickel is deposited?a 2.94 gb 5.87 gc 11.7 gd 58.7 ge 294 g
The mass of the nickel deposited is 5.87 g. The correct option is B.
To determine the mass of nickel deposited during the electroplating process, we can use the formula:
mass = (moles of electrons) × (molar mass of nickel) × (Faraday constant)
First, we need to find the moles of electrons. As 1 mole of electrons is equal to 1 Faraday, in this case, 0.200 Faraday of electrical charge corresponds to 0.200 moles of electrons.
Now, we need to find the molar mass of nickel. The atomic mass of nickel (Ni) is approximately 58.7 g/mol.
For the electroplating of nickel from NiSO₄, the balanced equation is:
Ni²⁺(aq) + 2e⁻ → Ni(s)
From the equation, we can see that 1 mole of nickel ions (Ni²⁺) requires 2 moles of electrons to form 1 mole of nickel metal (Ni).
Next, we will calculate the moles of nickel deposited:
moles of Ni = (moles of electrons) / 2
moles of Ni = 0.200 moles / 2 = 0.100 moles
Now we can calculate the mass of the nickel deposited:
mass = (moles of Ni) × (molar mass of nickel)
mass = (0.100 moles) × (58.7 g/mol) = 5.87 g
to know more about electroplating refer here:
https://brainly.com/question/20112817#
#SPJ11
To determine the mass of nickel deposited in the electroplating process, we need to use the equation:
mass of substance = (current x time x atomic mass) / (faraday's constant x valency)
In this case, we know that 0.200 faraday of electrical charge is passed through the solution of NiSO4. We also know that the valency of nickel is 2 (since NiSO4 contains one nickel ion with a +2 charge). The atomic mass of nickel is 58.69 g/mol. Faraday's constant is 96,485 C/mol.
So, plugging in the values we get:
mass of nickel = (0.200 x 1 x 58.69) / (96,485 x 2)
mass of nickel = 0.000608 g
However, the answer options given are in grams, so we need to convert our answer to grams:
mass of nickel = 0.000608 g = 0.608 mg = 0.000000608 g
Therefore, the correct answer is (d) 58.7 g.
In the electroplating of nickel, 0.200 Faraday of electrical charge is passed through a solution of NiSO4. The mass of nickel deposited can be calculated using Faraday's law of electrolysis.
First, we need to find the molar equivalent of 0.200 Faraday of charge. One Faraday is equivalent to the charge of one mole of electrons (approximately 96,485 C/mol). So, 0.200 Faraday is equivalent to 0.200 moles of electrons.
NiSO4 dissociates into Ni²⁺ and SO₄²⁻ ions in the solution. Nickel has a charge of +2, so one mole of nickel ions requires two moles of electrons for reduction (Ni²⁺ + 2e⁻ → Ni).
Since 0.200 moles of electrons are available, the moles of nickel deposited are 0.200 / 2 = 0.100 moles.
Now, to find the mass of nickel deposited, multiply the moles by the molar mass of nickel (58.69 g/mol):
0.100 moles × 58.69 g/mol = 5.87 g
Thus, the mass of nickel deposited is 5.87 g (option B).
Learn more about electrical charge here;
https://brainly.com/question/9194793
#SPJ11
As the temperature of air is reduced to its dew point, which phase change is most likely to occur?
As the temperature of air is reduced to its dew point, the phase change that is most likely to occur is the condensation of water vapor into liquid droplets, also known as dew.
As the temperature of air is reduced to its dew point, the phase change that is most likely to occur is condensation. Condensation is the process by which a gas changes into a liquid as it loses heat and its temperature decreases. When air is cooled to its dew point, which is the temperature at which the air becomes saturated with moisture and cannot hold any more water vapor, the excess moisture in the form of water vapor condenses into liquid droplets or frost, depending on the temperature and other conditions. This is commonly observed as dew forming on surfaces such as grass, leaves, and windows, or frost forming on colder surfaces during cold weather conditions.
To know more about dew point,
https://brainly.com/question/15313810
#SPJ11
misconceptions are very robust. thinking she was dispelling a common misconception that forces must continue to be applied if an object is to keep moving, ms. rambu put a disk on an air-hockey table (frictionless) and gave it a little push to get it going, then let go. the disk continue to move across the table until it hit another edge. which additional misconception might ms. rambu need to address after this demonstration?
Ms. Rambu's demonstration successfully addressed the misconception that continuous force is needed to keep an object moving.
However, an additional misconception she might need to address is the belief that objects always come to a stop due to a natural force, when in reality, objects stop due to external forces such as friction. In the case of the air-hockey table, the disk continued to move because the surface was frictionless. This demonstration can help students understand the concept of inertia and the role of external forces in an object's motion.
There must be four examples of an effect to prove a functional link.
Functional relationship refers to a complimentary and interactive relationship between land uses or improvements, such as at a minimum a great and high-quality interchange of human interaction, goods, sources, businesses, services, employment, or workers between land uses or advancements.
Learn more about Functional relationship here
https://brainly.com/question/29360620
#SPJ11
T or F? The force that opposes gravity is called the normal force.
True. The normal force is the force that opposes the force of gravity on an object that is in contact with a surface.
When an object is placed on a surface, the surface pushes back on the object with a force that is perpendicular to the surface. This force is called the normal force. The normal force is equal in magnitude to the force of gravity on the object, but acts in the opposite direction, which allows the object to remain in a state of static equilibrium. For example, when you stand on the ground, the normal force exerted by the ground on your feet is equal in magnitude to your weight, but acts in the opposite direction, which prevents you from sinking into the ground.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
THE PLATES OF PARALLEL PLATE CAPACITOR 5*10^-3M APART ARE MAINTAINED AT A POTENTIAL DIFFERENCE 0F 5*10^4.CALCULATE THE MAGNITUDE OF THE ELECTRIC FIELD INTENSITY AND FORCE ON THE ELECTRON
The magnitude of the force on the electron in the electric field is 1.6 * [tex]10^{-12}[/tex]N, directed in the opposite direction of the electric field intensity.
What is Electric Field?
Electric field is a physical quantity that describes the influence or effect that an electric charge exerts on other charges or objects in its vicinity. It is a vector quantity, meaning it has both magnitude and direction. The electric field is created by a charged object and extends radially outward or inward depending on the type of charge (positive or negative) and decreases with distance according to the inverse square law.
Electric field intensity (E) between the plates of a parallel plate capacitor is given by the formula:
E = V/d
Substituting the given values:
E = 5 * [tex]10^{4}[/tex] V / 5 * [tex]10^{-3}[/tex] m
E = 1 * [tex]10^{7}[/tex]V/m
So, the magnitude of the electric field intensity between the plates of the parallel plate capacitor is 1 * [tex]10^{7}[/tex] V/m.
The force (F) on an electron in an electric field is given by the formula:
F = q * E
Substituting the given values:
F = -1.6 * [tex]10^{-19[/tex] C * 1 *[tex]10^{7}[/tex] V/m
F = -1.6 *[tex]10^{-12}[/tex] N
Learn more about Electric Field from the given link
https://brainly.com/question/19878202
#SPJ1
in which case does viscosity play a dominant role? case a: a typical bacterium (size ~ 1 mm and velocity ~ 20 mm/s ) in fresh water. case b: a swimmer (size ~ 1.5 m and velocity ~ 3 m/s ) in fresh water.
Viscosity plays a dominant role in case a, with the typical bacterium moving slowly through the water due to its small size and high viscosity of the water.
In case b, the swimmer's larger size and higher velocity mean that the effects of viscosity are much less significant, as the swimmer is able to move more easily through the water. Viscosity plays a dominant role in Case A, where a typical bacterium (size ~ 1 mm and velocity ~ 20 mm/s) is in fresh water.
Due to the bacterium's small size and relatively low velocity, the effects of viscosity become more significant, impacting its movement through the fluid. In contrast,
Case B involves a swimmer (size ~ 1.5 m and velocity ~ 3 m/s) in fresh water, where the larger size and higher velocity lessen the impact of viscosity on the swimmer's movement.
To learn more about Viscosity click here
brainly.com/question/30759211
#SPJ11
A light ray moving through CR39 at an angle of 49 degrees exits into another medium at an angle of 27.48 degrees. What is the index of the second medium? What is this medium?
The index of refraction of the second medium is therefore approximately 1.496. The medium is crown glass.
We can use Snell's law to solve for the index of refraction of the second medium:
n₁ * sin(theta₁) = n₂ * sin(theta₂)
where n1 is the index of refraction of the first medium (which is presumably air, with an index of refraction close to 1), theta1 is the angle of incidence (49 degrees), n₂ is the index of refraction of the second medium, and theta₂ is the angle of refraction (27.48 degrees).
Plugging in the given values, we get:
1 * sin(49) = n₂ * sin(27.48)
Solving for n₂, we get:
n₂ = sin(49) / sin(27.48) ≈ 1.496
To determine the identity of the second medium, we can consult a table of refractive indices. Based on the index of refraction we just calculated, the second medium is likely a type of glass, such as crown glass.
To know more about light, here
brainly.com/question/15200315
#SPJ1
The Equilibrium Rule states that the vector sum of all forces acting on an object with zero acceleration is equal to zero, this is definition of?
The Equilibrium Rule is a fundamental principle in physics that states that the vector sum of all the forces acting on an object with zero acceleration is equal to zero.
In simpler terms, if an object is at rest or moving at a constant velocity, the net force acting on it must be zero. This principle can be applied to various situations, including stationary objects, objects in motion, and even systems with multiple objects.
For example, if a book is placed on a table and remains stationary, the forces acting on it must balance out to zero. This means that the force of gravity acting downward must be equal to the force of the table pushing upwards.
Understanding and applying the Equilibrium Rule is essential in many fields, including engineering and mechanics, and is a foundational concept for further study in physics.
To know more about Equilibrium Rule refer here:
https://brainly.com/question/18327644#
#SPJ11
The Equilibrium Rule is a fundamental principle in physics which states that if an object has zero acceleration, then the vector sum of all forces acting upon it must also be equal to zero. This means that the forces acting in opposite directions must be equal in magnitude and opposite in direction, creating a state of balance or equilibrium.
The Equilibrium Rule can be expressed mathematically as:
ΣF = 0
where ΣF represents the vector sum of all forces acting on the object.
When an object is at rest or moving with constant velocity, its acceleration is zero. According to Newton's Second Law, the net force acting on an object is equal to the product of its mass and acceleration:
ΣF = ma
If the acceleration is zero, then the net force must also be zero. This means that the vector sum of all forces acting on the object must be zero, as stated by the Equilibrium Rule.
It is important to note that the Equilibrium Rule only applies to objects with zero acceleration, and that objects in motion may have a non-zero net force acting on them, which causes them to accelerate.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
What color light can you add to cyan light to make green?
To make green light from cyan light, you need to add red light to it. Cyan light has a wavelength of around 490-520 nanometers, which means it is close to blue-green on the visible spectrum. When you add red light, which has a wavelength of around 620-750 nanometers, the combination of the two colors will produce green light. This is because red and cyan are complementary colors, meaning they are opposite each other on the color wheel, and when mixed together, they produce green light.
~~~Harsha~~~
Answer:
yellow light
Explanation:
Yellow light can be added to cyan light to make green.
If a penny has a mass of 2.507 g and is 2.5% copper, what is the mass of zinc in the coin?
The mass of zinc in the coin is 2.444325 g. It is obtained by subtracting the mass of the coin from the mass of the copper.
How to calculate the percentage?We have a penny with a mass of 2.507 g and 2.5% of it is copper. Find the mass of zinc.
We should know that a penny contains of copper and zinc. To find the mass of zinc in the penny, we first need to calculate the mass of copper in the penny. Then, we can subtract the mass of copper from the total mass of the penny.
Since the penny is 2.5% copper, we can multiply the total mass of the penny (2.507 g) by 2.5% to get the mass of copper.
The mass of copper is
= 2.507 g × 2.5%
= 2.507 g × 0.025
= 0.062675 g
So, the penny contains 0.062675 g of copper.
The mass of zinc is
= mass of penny - mass of copper
= 2.507 g - 0.062675 g
= 2.444325 g
Hence, the mass of zinc in the penny is 2.444325 g.
Learn more about calculating percentage here:
brainly.com/question/29832925
#SPJ11
What is ÎU equal to under adiabatic conditions?
Answer:
ΔU=Q+ΔW
Explanation:
In adiabatic process no exchange of heat occurs between system and surrounding so Q=0.
Thus, ΔU is equal to adiabatic work.
35. A bicycle has tires of radius 0.35 meters. If the bicycle is traveling at a constant speed of 7.8 m/s, at approximately what angular speed are the tires rotating?
A) 85 rev/min
B) 197 rev/min
C) 214 rev/min
D) 327 rev/min
E) 423 rev/min
Approximately The angular speed are the tires rotating is 214 rev/min.
To find the angular speed, we need to use the formula:
Angular speed (ω) = linear speed (v) / radius (r)
Given the radius (r) is 0.35 meters and the linear speed (v) is 7.8 m/s, we can plug these values into the formula:
ω = 7.8 m/s / 0.35 m
ω = 22.29 radians/s
To convert radians per second to revolutions per minute, we can use the following conversion:
1 revolution = 2π radians
1 minute = 60 seconds
ω = (22.29 radians/s) * (1 revolution / 2π radians) * (60 seconds / 1 minute)
ω ≈ 213.4 rev/min
The closest answer is option C) 214 rev/min.
learn more about angular speed refer: https://brainly.com/question/14663644
#SPJ11
A 0.100-kilogram apple hangs in a tree 1.50 meters above the ground. Ignoring frictional effects, the total mechanical energy of the apple is _____.
The total mechanical energy of the apple is of a 0.100-kilogram apple hangs in a tree 1.50 meters above the ground. Ignoring frictional effects, the total mechanical energy of the apple is 1.47 J (joules)
To find the total mechanical energy, we need to consider both the potential energy and kinetic energy of the apple. Since the apple is not moving, its kinetic energy is zero. However, it does have gravitational potential energy due to its height above the ground. The formula for gravitational potential energy is:
PE = mgh
where m is the mass of the object (0.100 kg), g is the acceleration due to gravity [tex](9.81 m/s^{2})[/tex], and h is the height above the ground (1.50 m).
Plugging in these values, we get:
[tex]PE = (0.100 kg)(9.81 m/s^{2})(1.50 m)[/tex]
= 1.47 J
Therefore, the total mechanical energy of the apple is 1.47 J.
In summary, the total mechanical energy of the apple hanging in the tree is 1.47 J, which is solely due to its gravitational potential energy.
For more information on potential energy kindly visit to
https://brainly.com/question/3067704
#SPJ11
a heater with a fixed heat flux heats 2 materials (of equal thickness). material a has a thermal conductivity k subscript a and material b has a thermal conductivity k subscript b. if k subscript a less than k subscript b and heat transfer through the wall is 1d conduction, how will the temperature difference across the two sides of each wall at steady state vary?
The Given a heater with a fixed heat flux, we have two materials of equal thickness, with Material A having a thermal conductivity of kea, and Material B having a thermal conductivity of k _b. We know that k _a < k _b, and heat transfer through the wall is one-dimensional conduction.
The steady state, the temperature difference across the two sides of each wall can be determined using Fourier's Law of Heat Conduction = -k * dT/dx Where q is the heat flux, k is the thermal conductivity, dT is the temperature difference, and dx is the thickness of the material. Since the heat flux (q) is fixed and the thickness dx of both materials is equal, we can rearrange the equation to solve for the temperature difference dT across the two sides of each wall dT = -q * dx / k For Material A, the temperature difference dT _a will bed T _a = -(q * dx) / k _a For Material B, the temperature difference dT _b will be dT _b = -q * dx / k _b Since k _a < k _b, we can conclude that'd > dT _b So, at steady-state, the temperature difference across the two sides of Material A will be greater than the temperature difference across the two sides of Material B.
learn more about flux here.
https://brainly.com/question/15237486
#SPJ11
Air Conditioning: An air conditioner nameplate indicates the minimum circuit ampacity of 43 ampere and maximum fuse size of 60 ampere. What is the minimum size branch circuit conductor and the maximum size overcurrent protection device?(422.13)
The minimum size branch circuit conductor is 8 AWG, and the maximum size overcurrent protection device is 60 ampere.
To determine the minimum size branch circuit conductors and the maximum size overcurrent protection device for an air conditioner with a minimum circuit ampacity of 43 ampere and maximum fuse size of 60 ampere, follow these steps:
1. Minimum size branch circuit conductor:
- Refer to the National Electrical Code (NEC) Table 310.16 for allowable ampacities of insulated conductors.
- Find the conductor size that can handle at least 43 ampere. In this case, a conductor with a size of 8 AWG (American Wire Gauge) is suitable, as it has an allowable ampacity of 50 ampere.
2. Maximum size overcurrent protection device:
- The air conditioner nameplate states the maximum fuse size is 60 ampere.
- You can use a 60-ampere fuse or breaker as the maximum size overcurrent protection device.
learn more about circuit conductors Refer: https://brainly.com/question/28269880
#SPJ11
thermal motion approaches a minimum as the temperature approaches absolute zero. (True or False)
Given statment "thermal motion approaches a minimum as the temperature approaches absolute zero." is true. Because as the temperature approaches absolute zero, thermal motion decreases and approaches a minimum, which is in line with the third law of thermodynamics.
True. Thermal motion is the random movement of particles in a substance. At higher temperatures, these particles have more kinetic energy and therefore move around more rapidly.
As the temperature approaches absolute zero (0 Kelvin or -273.15 degrees Celsius), the particles lose kinetic energy and move around less. In fact, at absolute zero, particles would theoretically come to a complete stop, and there would be no thermal motion.
This phenomenon is known as the third law of thermodynamics, which states that the entropy (or disorder) of a perfect crystal at absolute zero is zero. This means that there is no thermal motion or randomness in a perfect crystal at absolute zero. However, it is impossible to reach absolute zero in practice since some residual thermal motion always exists due to quantum effects.
For similar questions on thermal motion
https://brainly.com/question/24658017
#SPJ11
A rubber rod is rubbed with fur. The fur is then quickly brought near the bulb of an uncharged electroscope. The sign of the charge on the leaves of the electroscope is
phenomenon is known as electrostatic induction.
When a rubber rod is rubbed with fur, the rubber rod becomes negatively charged due to the transfer of electrons from the fur to the rubber. If the fur is then quickly brought near the bulb of an uncharged electroscope, the negative charge on the fur will induce a positive charge on the leaves of the electroscope by repelling electrons to the bottom of the leaves. Therefore, the sign of the charge on the leaves of the electroscope will be positive. This is because opposite charges attract each other and the positively charged leaves are attracted to the negatively charged fur. This phenomenon is known as electrostatic induction.
To know more about electrostatic induction click here:
https://brainly.com/question/27716037
#SPJ11
an object is placed at a distance of 27.0 cm away from a thin convex lens with a focal length of 9.00 cm. how far from the lens is the image located and what type of image is formed?
An object is placed at a distance of 27.0 cm away from a thin convex lens with a focal length of 9.00 cm. The image is located at a distance of 6.75 cm from the lens and the image formed is real and inverted.
To find the distance of the image formed by a convex lens, we can use the lens formula:
1/f = 1/u + 1/v
where f is the focal length of the lens, u is the object distance, and v is the image distance.
Given:
Object distance (u) = -27.0 cm (negative because it's on the same side as the object)
Focal length (f) = 9.00 cm
Plug in the values into the lens formula:
1/9 = 1/(-27) + 1/v
Now, let's solve for v:
1/v = 1/9 + 1/27
1/v = 3/27 + 1/27
1/v = 4/27
v = 27/4
The image distance (v) = 6.75 cm. The positive value of v indicates that the image is formed on the opposite side of the lens compared to the object.
Since the image is formed on the opposite side and has a positive image distance, it is a real and inverted image.
To learn more about the convex lens, refer:-
https://brainly.com/question/1604692
#SPJ11
Using the thin lens formula:
1/f = 1/d0 + 1/di
where f is the focal length of the lens, d0 is the object distance from the lens, and di is the image distance from the lens.
Plugging in the given values:
1/9 = 1/27 + 1/di
Simplifying the equation:
1/di = 1/9 - 1/27 = (3 - 1)/27 = 2/27
di = 27/2 = 13.5 cm
The image is formed 13.5 cm away from the lens.
To determine the type of image formed, we can use the following rules:
If di is positive, the image is real and located on the opposite side of the lens from the object.
If di is negative, the image is virtual and located on the same side of the lens as the object.
If di is infinite, the image is formed at infinity and is said to be a "point image."
If di is zero, the image is formed at the same location as the object and is said to be a "coincident image."
In this case, since di is positive, the image is real and located on the opposite side of the lens from the object.
To know more about lens visit here :
https://brainly.com/question/28042333
#SPJ11
2) What do we call the bright, sphere-shaped region of stars that occupies the central few thousand light-years of the Milky Way Galaxy? A) the galaxy's disk B) the galaxy's bulge C) a globular cluster D) the galaxy's halo
The bright, sphere-shaped region of stars that occupies the central few thousand light-years of the Milky Way Galaxy is called B) the galaxy's bulge.
The Milky Way Galaxy is composed of a central bulge, which is a bright, sphere-shaped region of stars that occupies the central few thousand light-years of the galaxy. The bulge is composed of several hundred billion stars and is the most densely populated region of the Milky Way. It is made up of an old population of stars, each of which is orbiting the galaxy's center in a highly eccentric orbit. The bulge is surrounded by the galaxy's disk, which is made up of a younger population of stars and contains the spiral arms of the Milky Way. The halo is a large, diffuse region that surrounds the bulge and disk, and contains the oldest stars in the galaxy. Globular clusters are collections of hundreds of thousands of stars that orbit the Milky Way and are found in both the bulge and halo regions.
learn more about Galaxy Refer: https://brainly.com/question/14766416
#SPJ11
A football is kicked off the ground a distance of 50 yards downfield. Neglecting air resistance, which of the following statements would be INCORRECT when the football reaches the highest point? (A) all of the balls original kinetic energy has been changed into potential energy (B) the balls horizontal velocity is the same as when it left the kickers foot (C) the ball will have been in the air one-half of its total flight time (D) the ball has an acceleration of g (E) the vertical component of the velocity is equal to zero
The incorrect statement when the football reaches the highest point would be (E) the vertical component of the velocity is equal to zero. At the highest point, the vertical velocity is momentarily zero but it still has a horizontal velocity that is the same as when it left the kicker's foot.
The ball will continue to move forward in a parabolic path and its total flight time will be determined by its initial speed and launch angle. The acceleration of the ball throughout its flight is always equal to the acceleration due to gravity (g) and the potential energy at the highest point is equal to the kinetic energy at the start. I'd be happy to help you with your question. The INCORRECT statement when the football reaches the highest point is all of the balls original kinetic energy has been changed into potential energyAt the highest point, the vertical component of the velocity is zero, but the horizontal component of the velocity remains unchanged. Therefore, the football still has some kinetic energy due to its horizontal motion. Not all of the original kinetic energy has been converted into potential energy.
learn more about football here
https://brainly.com/question/22468787
#SPJ11
f the submarine and the torpedo were initially at rest and the torpedo left the submarine with a speed of 89.2 m/s, what is the recoil speed of the submarine? b) what is the direction of recoil of the submarine?f the submarine and the torpedo were initially at rest and the torpedo left the submarine with a speed of 89.2 m/s, what is the recoil speed of the submarine? b) what is the direction of recoil of the submarine?
Submarine and the torpedo were initially at rest, torpedo left submarine with a speed of 89.2 m/s, a) recoil speed of the submarine is 0.892 m/s in the opposite direction of the torpedo. b) recoil of the submarine is in the opposite direction of the velocity vector of the torpedo.
To solve this problem, we can use the principle of conservation of momentum. The momentum of the system (submarine + torpedo) before the torpedo is fired is zero, since both objects are at rest. After the torpedo is fired, the total momentum of the system is still zero, but now the torpedo has momentum in one direction, so the submarine must have an equal and opposite momentum in the other direction.
a) Using the equation for conservation of momentum, we can write:
0 = m_sub * v_sub + m_tor * v_tor
where m_sub is the mass of the submarine, v_sub is the recoil speed of the submarine, m_tor is the mass of the torpedo, and v_tor is the speed of the torpedo. Plugging in the values given in the problem, we get:
0 = m_sub * v_sub + m_tor * 89.2 m/s
Solving for v_sub, we get:
v_sub = - m_tor * 89.2 m/s / m_sub
Plugging in the values for m_tor and m_sub (which are not given in the problem, so we'll have to make some assumptions), we get:
v_sub = - 1000 kg * 89.2 m/s / 100000 kg
v_sub = -0.892 m/s
Therefore, the recoil speed of the submarine is 0.892 m/s in the opposite direction of the torpedo.
b) The direction of recoil of the submarine is opposite to the direction of the torpedo, so it is in the opposite direction of the velocity vector of the torpedo.
To learn more about velocity vector click here
brainly.com/question/13492374
#SPJ11
Delta V R rms equals I rms times R. true or false
False. Delta V (RMS) = IR, is the correct equation for the RMS voltage drop across a resistor, where I is the root-mean-square (RMS) current flowing through the resistor and R is the resistance of the resistor.
In electrical engineering, root-mean-square (RMS) is a mathematical measure of the average value of a varying voltage or current. It is calculated by taking the square root of the mean of the squares of the instantaneous values of voltage or current over a given period of time.
In the equation Delta V (RMS) = IR, Delta V (RMS) represents the RMS voltage drop across a resistor, I represents the RMS current flowing through the resistor, and R represents the resistance of the resistor.
learn more about RMS voltage here:
https://brainly.com/question/13507291
#SPJ4
Why are there some areas in cities where wind speed is zero?
There are a few reasons why certain areas in cities may have zero wind speed. One possible explanation is the presence of tall buildings or other structures that create a wind shadow.
This occurs when the buildings obstruct the flow of air, causing it to slow down or stop entirely in the space behind the structure. Another factor that can contribute to zero wind speed is topography. If an area is situated in a valley or other low-lying area, it may be shielded from the wind by the surrounding terrain. Additionally, weather conditions can affect wind speed, so it's possible that certain areas experience calm conditions due to a lack of wind at the time.
In cities, some areas may experience zero wind speed due to factors such as tall buildings, urban structures, and topography. These elements can obstruct and disrupt wind flow, creating areas of calm or stagnant air. This phenomenon is known as wind shadow or wind sheltering.
Visit here to learn more about topography brainly.com/question/2279445
#SPJ11
a 10vpp sinusoidal ac component with a nominal dc voltage at 10v. what is the ripple ratio of it? (give your answer to two decimal places)
Answer:
0.5 or 50%.
Explanation:
The ripple ratio is a measure of the magnitude of AC voltage compared to the DC voltage in a circuit, typically used in power electronics. It is calculated as the ratio of the amplitude of the AC component (VAC) to the DC component (VDC) in a waveform.
Given:
Amplitude of AC component (VAC) = 10 Vpp (peak-to-peak) = 10/2 = 5 V
Nominal DC voltage (VDC) = 10 V
Ripple Ratio = VAC / VDC
Ripple Ratio = 5 V / 10 V
Ripple Ratio = 0.5 (or 50% when expressed as a percentage)
So, the ripple ratio for the given circuit is 0.5 or 50%.
How did people fly before Isaac Newton invented gravity?
Answer:
Isaac Newton did not invent gravity. Gravity is a fundamental force of nature that has always existed. Newton's contribution was to formulate the laws of motion and universal gravitation, which helped to explain the behavior of objects under the influence of gravity.
As for how people flew before the development of powered flight, they relied on a variety of methods, such as gliding, using hot air balloons, and being lifted by the wind in kites. For example, in China, people have been flying kites for more than 2,000 years. In the late 18th century, the Montgolfier brothers developed hot air balloons, which allowed humans to ascend into the air for short periods of time. And in the late 19th and early 20th centuries, pioneers of aviation such as the Wright brothers and their contemporaries developed powered aircraft, which eventually led to modern air travel.
An example of a pressure-differential type water is a?
a. Venturi meter
b. Propeller meter
c. Nutating disk meter
d. Magnetic flow meter
a. Venturi meter. A Venturi meter is a pressure-differential type of water meter that measures the flow rate of a fluid by creating a pressure difference through a constriction in the flow path.
It consists of a converging section followed by a throat and then a diverging section. The diameter of the throat is smaller than the diameter of the pipe, which causes the velocity of the fluid to increase as it passes through the throat.
As the fluid passes through the throat, its velocity increases while the pressure decreases due to Bernoulli's principle. This pressure difference can be measured using pressure taps located before and after the throat. By measuring the pressure difference, the flow rate of the fluid can be calculated using Bernoulli's equation.Venturi meters are widely used in various industries such as chemical, oil and gas, and
Find out more about the Venturi meter
brainly.com/question/31568931
#SPJ11