List Examples of what an engineer does

Answers

Answer 1
Answer:

The engineers below do it all: design, invent, fix, improve, research, travel, present, inspect, draw, write, calculate—but most of all, they work with really interesting people on great projects that are changing the world for the better.

Related Questions

on some early automobiles both headlights went out when one bulb burned out. the headlights must have been connected in

Answers

The light bulbs were connected to the same relay. When one headlight goes out, both go out at the same time. Now days, each headlight are on its own relay so if one headlight goes out, that light bulb goes out. That way you still have light.

What is the total resistance of three resistors in parallel with values of 2 ohms, 4 ohms, and 4 ohms?

Answers

Answer:

So 1/Rt=1/4+1/4+1/2=4/4 = 1 so Rtotal=1

The total resistance of three resistors in parallel with values of 2 ohms, 4 ohms, and 4 ohms is 1 ohm.

What is resistance?

The impediment to current flow in an electrical circuit is quantified by resistance. The Greek letter omega represents the unit of measurement for resistance, known as ohms.

The equivalent resistance will also be equal to R/n, where R is the value of the resistor. n is the total number of resistors in the combination if three or more resistors of the same value are connected in parallel.

As the resistors are connected parallelly, the resistance of all the resistors will be greater than the results. The calculation will be smaller than all resistors.

1 / Rt = 1 / 4 + 1 / 4 + 1 / 2 = 4 / 4 = 1

Therefore, the total resistance of three resistors in parallel is 1 ohm.

To learn more about resistance, refer to the link:

https://brainly.com/question/13831338

#SPJ2

tech a says that all wheels must be torqued to prevent wheels from loosening up and falling off. tech b says that all wheels must be torqued to prevent over tightening, which can weaken lug studs and warp brake rotors. who is correct

Answers

Answer: New wheels should be re-torqued after the first 50 to 100 driving miles. This should be done in case the clamping loads have changed following the initial installation due to the metal compression/elongation or thermal stresses affecting the wheels as they are breaking in, as well as to verify the accuracy of the original installation.

Answer:

I thinkC

Explanation:

BTSAUDY5 NAME STARTS FROM THIS

Answers

What is your question

in the multiple pipe system shown below, which of the following is true concerning the linear system?.

Answers

Answer:

maybe

Explanation:

th liner pupe us it it had ore moecuke and tepiract

describe how you could engineer the situation to produce even more friction and heat

Answers

True the use many abstract power

What does MPL stand for in robot form.

Answers

Answer:

Mechanical Parts list

Answer:

Modular Prosthetic Limb

Explanation:

To select the proper twist drill, one should check
оа
drill speed
Ob
size, sharpness and type of shank
ос
length of the drill cutting lips
Od
lubrication needed

Answers

Answer:

OB. size, sharpness and type of shank.

Explanation:

Hope this is helpful if not sorry :(

what year is gas powered cars expected stop being produced

Answers

Answer:

2035

Explanation:

The governors of a dozen U.S. states including California, New York, Massachusetts and North Carolina called on President Joe Biden on Wednesday to back ending sales of new gasoline-powered vehicles by 2035, a dramatic shift away from fossil fuels.

Answer:(:

Explanation:

Joe Biden on Wednesday to back ending sales of new gasoline-powered vehicles by 2035, a dramatic shift away from fossil fuels

Hęłłõ hõw årę ÿõū dõìńg tõdāÿ

Answers

Answer:

All good :)

What about you??

Write a short summary of the power of dreams

Answers

Answer:

Walker went on to front Paranoid Saints, the Ex-Kings and the Bollox.

Reunion

In November 2009, Power of Dreams announced a reformation and tour to promote the 20th anniversary re-release of their first album (on 100% Music)[8] in March 2010.[9] In December 2010, a further tour of Ireland took place with Sultans of Ping and The Frank and Walters to support the release of a compilation album, 1989: The Best of Power of Dreams, which included a new track.[10] Power of Dreams' most recent gig was as part of "Indie Daze" at London's Forum in September 2014.

In March 2011, Keith Walker announced an amicable departure from the band and has gone on to play with Sister Cities,[11] Being Cool Is Lonely and The Holy Coast.[12] Olney plays with a new band, Cat Meat.[13] Walker continued to perform as Power of Dreams and to work on new material alongside his new project, Mineral, based in Paris.[14] In 2014, The Avener had a chart-topping hit single in several European countries with "Fade Out Lines", a remix of a song written by Walker and Phoebe Killdeer (ex-Nouvelle Vague) for Phoebe Killdeer and the Short Straws' second album Innerquake, released in 2012.

In December 2011, Immigrants, Emigrants and Me appeared in the book 101 Irish Records You Must Hear Before You Die.[15] In April 2013, the album was in the Irish Independent's top 30 albums of all time.[16]

In 2020, Power of Dreams released two new singles, "America"/"Across the Shannon",[17][18] and "Hurricane",[19] to promote forthcoming album Aüslander.

In July 2021, Aüslander, their first album in 27 years was released by The state51 Conspiracy and became a new entry on the Official Irish Albums Chart Top 50 when it charted at Number 22 on the chart of 05 August 2021

Why are plastics known as synthetic materials?​

Answers

Ans: Synthetic polymers are made up of long chains of atoms, arranged in repeating units, often much longer than those found in nature. It is the length of these chains, and the patterns in which they are arrayed, that make polymers strong, lightweight, and flexible. In other words, it's what makes them so plastic.

what happen when position and crest of a light wave decreases

Answers

Answer:

All photons travel at the speed of light. ... From this equation, it is clear that the energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. Thus as frequency increases (with a corresponding decrease in wavelength), the photon energy increases and visa versa.

Explanation:

Technician A says that the connecting rod and main bearing caps should be marked before removing to ensure that they can be installed in the exact same location when reassembled. Technician B says that the tip of the valve stem should be filed before removing valves from the cylinder head to help prevent damage to the valve guide. Who is right

Answers

Answer:

Technician A

Explanation:

This is because when the dimacations are made, the surface area and length respectively can be maintained to reduce to idea of force which may lead to damage

what is the largest, low-cost airline carrier in the world, which recently canceled thousands of flights for reasons partially disputed by the federal aviation administration?

Answers

The largest, low-cost airline carrier in the world that recently canceled thousands of flights for reasons partially disputed by the federal aviation administration (FAA) is Southwest Airlines.

Southwest Airlines canceled 2,500 flights in just a few days.

According to Southwest Airlines, the cause of the cancellation is due to air traffic control problems and disruptive weather.

While FAA claimed that nothing like a reported case of air traffic and staffing shortages.

Southwest Airlines is the world's largest low-cost carrier and has its main office is located in Dallas, Texas.

Hence, in this case, it is concluded that the correct answer is "Southwest Airlines."

Learn more here: https://brainly.com/question/24782945

Which of these statements is true about Newton's First Law of Motion?

If the net force on an object is zero, its velocity will remain constant
An unbalanced force on an object will always impact the objects speed
an unbalanced force on an object will always change the objects direction

Answers

Answer:

the second one is correct

Explanation:

Explanation:

» If the net force on an object is zero, its velocity will remain constant

Which of these systems creates and delivers high voltage sparks at the right time to ignite the air-fuel
mixture in the combustion chamber?

Answers

Answer:  Ignition System

Explanation:

Ignition System is the systems creates and delivers high voltage sparks at the right time to ignite the air-fuel mixture in the combustion chamber.

What are the 3 types of ignition systems?

Automotive ignition systems can be categorised: coil-on-plug, distributor-based, and distributor-free (COP). Early ignition systems delivered the spark at the appropriate time using entirely mechanical distributors.

Thus, it is Ignition System

For more details about types of ignition systems, click here:

https://brainly.com/question/14094081

#SPJ2

_____________ designers want to modernize the ao dai in many different ways. *
1 điểm
A. Fashion
B. Fashionable
C. Fashionably
D. Lot of

Answers

Answer:

fashion designers is the answer

Answer:

Fashion

Explanation:

hope my answer helps you .

a ventilation blower should be operated for how long after fueling?

Answers

Ans: four minutes

Explanation: After fueling: Put the fill cap on tightly to prevent vapors from escaping. Open all windows, ports, doors, and other openings. If your boat is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine.

Why do you think Construction is desirous of a gender mixed work force

Answers

Answer:

According to the Bureau of Labor Statistics, only 9.9% of construction professionals are women. In regard to race, 30.7% of professionals in the industry are Hispanic or Latino, 6.2% are black, and a staggering 2% are Asian.

Explanation:

Which of these is NOT one of the four A’s of defensive driving?

Answers

Answer:

It's called The LLLC Defensive Driving Principles™, but we just call it “Triple-L-C.” Using the Four Driving Principles of Safety, Look Ahead, Look Around, Leave Room, and Communicate, gives you the time and information you need to avoid an accident and be an all-around better driver.

The correct answer is anxiety!

Complete two examples of how scientists, technologists, engineers, and mathematicians may work together to create a new product invention or innovation

Answers

One example for why or how Scientist, Engineers, Mathematicians, & Technologists may work together is to create something that doesn't already exists. Sometimes Engineers may call a Scientist to get help on how or why a certain product is made or used for something. There could be times where a Scientists & engineer may call a Mathematicians to help with the math

2. How were scientists able to access a car's computer system?
3. What other looming dangers are there for drivers of newer, computer controlled

Answers

Ans:

2. The wireless hacking was done by taking advantage of the sensors inside each tire that broadcast a brief radio signal every 60 to 90 seconds. The signal tells one of the car's computer systems the pressure of each.

draw perpendicular lines based on the info in the image.

Answers

Wait let me try it…..

What are the rules for maintaining a time margin for safe driving?

Answers

Answer:

We should keep a good distance between the vehicle infront of us and from ours to avoid any type of accident.

3-second rule=>allowing a minimum of 3 seconds of travel between our vehicle and the vehicle we are behind.

Explanation:

HOPE IT HELPS YOU!!

.Name the control group ___________________________ 2.Name the experimental group ____________________ 3.Name the independent variable __________________ 4.Name the dependent variable __________

Answers

Answer:

please

Explanation:

what is the story

pleaseee help! 100 points!!!!!!!!!!!!!! geometry angles in parallel lines question.

Answers

Answer:

answer are c=74

d= 122

a= 58

b= 48

what kind of abilities are needed to run a business

Answers

Answer:

Essential business skills:

1. Financial management. Being able to effectively manage your finances is critical. ...

2. Marketing, sales and customer service. ...

3. Communication and negotiation. ...

4. Leadership. ...

5. Project management and planning. ...

6. Delegation and time management. ...

7. Problem solving. ...

8. Networking.

on gasoline powered boats, when should the blower be operated?

Answers

Ans: 4 minutes


Explanation: It is recommended that you use a blower at least 4 minutes before you ever start the engine, and especially after fueling.

On gasoline powered boats, the blower should be operated before starting the engine, during fueling, etc.

In the following circumstances, the blower should be used on boats powered by petrol:

It's crucial to run the blower for a few minutes before starting the engine.It is advised to keep the blower going while you are fueling.When the vessel is in motion: Some marine safety recommendations advise running the blower continuously while the boat is underway, especially in enclosed engine compartments, however this is not required.

Thus, during these conditions, one should operate the blower.

For more details regarding gasoline powered boats, visit:

https://brainly.com/question/4143582

#SPJ6

Based on your client's request, you will now create a sketch model of your designed pet toy. You will use your technical sketch and scale dimensions to create a computer model according to the same scale. However, the creation of the sketch model is only part of the engineer's responsibility. You must create a 300- to 500-word script for a persuasive presentation of your sketch model to your audience (client) and convince him or her that this new pet toy is a product that the company will want to sell. Be sure to incorporate design elements and materials into your reasoning in your presentation.

Answers

Answer:

From this in-depth examination we aimed to draw out some of the key ... closely their business case and employ model makers to create a 3D prototype.

Explanation:

Other Questions
What is the slope of the line shown on the grid? Lillie is saving up for a trip she is taking with friends during her break from school. If Lillie's current monthly net pay is $429.00 and her monthly expenses are $347.49, what percent of her net pay is left for savings? a19% b23% c65% d81% supplies and reinforcements could not reach american harbors because of: Kerri sold her purse for $351. She had originally purchased it for $316. Calculate her profit or loss percentage. Multiply the factors by FOIL technique and write the answer in Standard Form (y=ax^2+bx+c): y=(2x+3)(x-3) * dark they were, and golden eyed close read answers Which two phrases describe the movement of thermal energy due toconvection currents in the water on Earth?O A. From the bottom of the ocean to the surfaceB. From the surface of the ocean to the bottomC. From cooler parts of Earth to the equatorD. From the equator to cooler parts of Earth The four main groups of macromolecules are carbohydrates, lipids, proteins. Identify each type of macromolecule based on its monomer. 4/5 times 3/4 = ?Apply using GCF and LCM to Fraction Operations HELPPPPP!!!Which of the following inequalities matches the graph? 10 8. 6 4 4. GV 2 HE x HHHHHHHHHHOHHHHHHHHH 4 6 -10 -8 -6 -4 -2.7 2 -2 I -4 -6 -8 1 -- 10 OxZ-7 Ox=-7 Oy=-7 Oy -7 which example is an application of the principle of uniformitarianism? What can the reader infer about thespeaker based on last stanza of the poem? Below are works-cited entries for a magazine article. Select the one that is completely correct.Entry A:Hofer, Craig. "Community Service Pays Off." US News and World Report Nov 10, 2011: 6-9.Entry B:Hofer, Craig, "Community Service Pays Off" US News and World Report. 10 Nov. 2011, pgs. 6-9.Entry C:Hofer, Craig. "Community Service Pays Off." US News and World Report, 10 Nov. 2011, pp. 6-9.Entry D:Hofer, Craig. "Community Service Pays Off." US News and World Report 10 Nov. 2011. pp 6-9.Entry AEntry BEntryEntry D Which definition best defines the Principle of Design, Balance? NEED HELP FASTy=1/3x+1 A recipe that would make 18 cupcakescalls for 4 teaspoons of vanilla. Howmany cupcakes is that per teaspoon? What is the slope-intercept equationfor the following line? simplify this complex fraction . FRENCH HELPPPPPPPPPP ASAP NO LINKS!!! Hyperbola: y = 1/xShape:Domain:Range:Locater point:Asymptotes: