Let p(x)=x+3x²-4x-12 a) Find the x-intercepts of the graph of p(x) c) Sketch a graph of p(x) b) Find the y-intercept of the graph of p(x)

Answer:

0

Step-by-step explanation:

Apply Only the Outside and Inside Method of the Foil Method.

[tex]7 \times - \frac{1}{2} = - 3.5x[/tex]

[tex] \frac{1}{2} \times 7x = 3.5x[/tex]

Add them together

[tex] - 3.5x + 3.5x = 0[/tex]

So our b value is 0.

Answer:

  (x +6)² +(y +3)² = 36

Step-by-step explanation:

The standard form equation of a circle with center (h, k) and radius r is ...

  (x -h)² +(y -k)² = r²

__

We have a circle with diameter 12, so its radius is 6. The center is given as (h, k) = (-6, -3), so the equation can be written ...

  (x -(-6))² +(y -(-3))² = 6²

Simplifying this a suitable amount, we have the equation ...

  (x +6)² +(y +3)² = 36

For any positive integer k, the radius of convergence R is: If k ≥ -2, R = 0 (the series diverges for all x). If k < -2, R = ∞ (the series converges for all x).

To find the radius of convergence,

R, of the series Σ[tex][n!^{k+3} / ((k + 3)n)!][/tex][tex]x^n[/tex]  (n = 0 to infinity),

we can use the ratio test.

Step 1: Apply the ratio test

Consider the ratio of consecutive terms:

L = [tex]\lim_{n \to \infty}[/tex] |[tex](n+1)!^{k+3}[/tex] / ((k + 3)(n + 1))!| / [tex]n!^{k+3}[/tex]/ ((k + 3)n)!|

= [tex]\lim_{n \to \infty}[/tex] |[tex](n+1)!^{k+3}[/tex] / [tex]n!^{k+3}[/tex] × ((k + 3)n)! / ((k + 3)(n + 1))!|

= [tex]\lim_{n \to \infty}[/tex] |[tex]n+1^{k+3}[/tex]/ ((k + 3)(n + 1))|

Step 2: Simplify the ratio

L =[tex]\lim_{n \to \infty}[/tex][tex]|(n + 1)^k / (k + 3)|[/tex]

= ∞ if k ≥ -2 (the limit diverges)

= 0 if k < -2 (the limit converges to 0)

Step 3: Determine the radius of convergence

According to the ratio test, the series converges if L < 1,

and diverges if L > 1.

Since the limit L depends on the value of k,

the radius of convergence R varies accordingly:

If k ≥ -2, the series diverges for all values of x.

If k < -2, the series converges for all values of x.

Learn more about limit converges here:

https://brainly.com/question/31489380
#SPJ4

Rhombuses and parallelograms are always quadrilaterals, having four sides.

However, they both don't always have equal side lengths, although sometimes they do.

I hope this helps ^^

Answer: 20$

Step-by-step explanation: You would add 2(5)+10=y so 10+10=y 10 + 10 = 20

In this case (5,20). Hope this helps!!

Expanding the expression -3(X² - 4x + 2) + 4(X + 1) involves using the distributive property to multiply each term inside the parentheses by the coefficient outside the parentheses. The resulting expression is simplified by combining like terms and the result is -3X² + 16x - 2.

To expand the given expression, we apply the distributive property. We start by multiplying -3 by each term inside the parentheses: -3(X²) - 3(-4x) - 3(2).

Similarly, we multiply 4 by each term inside the second set of parentheses: 4(X) + 4(1).

The next step is to simplify each multiplication. -3(X²) results in -3X², -3(-4x) simplifies to +12x, and -3(2) simplifies to -6.

Similarly, 4(X) simplifies to 4X, and 4(1) simplifies to 4.

Now, we can combine like terms by adding or subtracting them. In this case, we have -3X² + 12x - 6 + 4X + 4.

Combining the like terms 12x and 4X gives us 16x.

The expression becomes -3X² + 16x - 2.

Therefore, after expanding and simplifying the given expression -3(X² - 4x + 2) + 4(X + 1), the result is -3X² + 16x - 2.

Learn more about distributive property here:

https://brainly.com/question/30321732

#SPJ11

Answer:

A. Scores 90 and 95

Step-by-step explanation:

A. works because the pattern makes sense as it is adding by 5.

B. doesn't work because after 85 becomers80 which doesn't make sense since there is 100 on the end so the pattern for the x-axis is adding up.

C. doesn't work because after 90, it becomes, 100 and after that, there is another 100 and the pattern makes no sense.

D. doesn't work because our pattern rule is adding and after the 90 becomes 75 so it is subtracting so it doesn't work.

So our final answer is A.

Answer:

90 and 95

Step-by-step explanation:

look at the dot plot on the very left. it shows two blanks. then in the diagram it shows results of 85, 90, 95, and 100. on the dot plot it has 85 and 100 plotted but is missing 90 and 95.

If the class has a mean (μ) of 60 and a standard deviation (σ) of 10, and your score is 65, then you would be above the mean but still within one standard deviation. In this case, the set of parameters μ = 60 and σ = 10 would likely give you a relatively good grade.

To determine which set of parameters would give you the best grade on the exam, we need to understand the grading scheme and how your score is compared to the rest of the class. Specifically, we need to know the mean (μ) and standard deviation (σ) of the exam scores for the entire class.

If the grading scheme involves a curve, where your score is compared to the mean and standard deviation of the class, then the set of parameters that would give you the best grade would depend on the distribution of scores in the class.

If the class has a mean (μ) of 60 and a standard deviation (σ) of 10, and your score is 65, then you would be above the mean but still within one standard deviation. In this case, the set of parameters μ = 60 and σ = 10 would likely give you a relatively good grade.

However, if the class has a different mean and standard deviation, or if the grading scheme does not involve a curve, then a different set of parameters might give you the best grade.

Without more specific information about the grading scheme and the distribution of scores in the class, it is difficult to determine the exact set of parameters that would result in the best grade for you.

Visit here to learn more about standard deviation brainly.com/question/29115611
#SPJ11

Answer: x= 4y/7 - 1/7

7x/4+ 1/4

Step-by-step explanation:

Answer:

Option 2

Step-by-step explanation:

if an input produces more than one output, the table does not represent a function.

Respuesta:

120 metros

Explicación paso a paso:

Dado que:

Área del lote cuadrado = 900 m²

Área, A de cuadrado = s²

Donde, s = longitud del lado

s² = 900

Toma el cuadrado de ambos lados

s = raíz cuadrada (900)

s = 30

Se requiere metro lineal de alambre para cercar, el lote será el perímetro del lote cuadrado;

El perímetro del lote cuadrado = 4s

Por eso,

Perímetro del lote cuadrado = 4 * 30

Perímetro del lote cuadrado = 120 m

Answer:

The answer is x<3

Answer:

120 pi

Step-by-step explanation:

a. 1/3pi(6)^2(10)

just plug them into the calculator using pi.

b. pi is more accurate because you aren't round to 3.14. If you use 3.14 your answer will be rounded and not an exact number.

The volume of the cone is 120π.

Because 3.14 is an approximation to π which is accurate to about one twentieth of a percent.

The volume of the cone is;

[tex]\rm Volume \ of \ cone=\dfrac{1}{3}\pi r^2h\\\\Where \ r= radius , \ h = height[/tex]

A trap to catch fruit flies uses a cone in a jar.

The cone is shown with a height of 10 centimeters (cm) and a radius of 6 centimeters (cm.)

1. The volume of the cone is;

[tex]\rm Volume \ of \ cone=\dfrac{1}{3}\pi r^2h\\\\ Volume \ of \ cone=\dfrac{1}{3}\times \pi \times 6^2\times 10\\\\ Volume \ of \ cone=\dfrac{1}{3}\times \pi \times 36\times 10\\\\ Volume \ of \ cone=120\pi \\\\[/tex]

The volume of the cone is 120π.

2. Because 3.14 is an approximation to π which is accurate to about one twentieth of a percent.

If you are dealing with everyday physical measurements, this accuracy for π will likely exceed the accuracy of your measurement (such as your height to within a millimetre or four hundredths of an inch!). Hence a calculated answer would not be more accurate than if you simply used 3.14 or, just to be sure, 3.142.

Learn more about volume of cone here;

https://brainly.com/question/12559866

#SPJ2

Answer:

28 hey hello how you doing the answer is 28

The answer option that is true include the following: D. Slack = (LF-LS).

Project management is a strategic process that involves the design, planning, developing, leading and execution of a project plan or activities, especially by using a set of skills, knowledge, tools, techniques and experience to achieve the set goals and objectives of creating a unique product or service.

Under project management, the slack of a project can be calculated by taking the difference between the activity's latest start and earliest start time.

In this context, the slack of a project is the difference between its latest finishing time (LF) and earliest finishing time (LS):

Slack = (LF - LS)

Read more on project here: brainly.com/question/14458025

#SPJ4

The general nonhomogeneous solution for the given higher-order differential equation, y" – 2y' – y + 2 = 0, can be found by reducing it to a system of first-order differential equations (HODE) and solving the resulting system.

To reduce the higher-order differential equation to a system of first-order differential equations, we introduce two new variables, u and v. We let u = y' and v = y''. By taking the derivatives of these new variables, we have u' = y'' and v' = y'''.

Substituting these expressions into the original equation, we obtain the following system of first-order differential equations:

u' = v
v' = 2u + v - 2

Now, we can solve this system using standard techniques. The characteristic equation associated with this system is r^2 - r - 2 = 0, which factors as (r - 2)(r + 1) = 0. Hence, the eigenvalues of the system are λ₁ = 2 and λ₂ = -1.

For λ₁ = 2, we find the corresponding eigenvector to be [1, 0]. For λ₂ = -1, the eigenvector is [1, -2].

The general solution of the homogeneous system is given by:
u(t) = c₁e^(2t) + c₂e^(-t)
v(t) = c₁e^(2t) + (-2c₁ + c₂)e^(-t)

To find the particular solution, we assume a solution in the form of u_p = At and v_p = Bt + C. Substituting this into the system, we obtain A = -3 and C = -1.

Therefore, the general nonhomogeneous solution to the given higher-order differential equation is:
y(t) = c₁e^(2t) + c₂e^(-t) - 3t - 1.

By reducing the given higher-order differential equation to a system of first-order differential equations and solving the resulting system, we found the general nonhomogeneous solution to be y(t) = c₁e^(2t) + c₂e^(-t) - 3t - 1.

To know more about  nonhomogeneous solution,visit:
https://brainly.com/question/30876746
#SPJ11

A unit rate is a ratio comparing quantities measured in different units. Unit rates are most useful in finding an equivalent ratio, proportion, and also a missing value in a ratio table.

A ratio table can be used to solve a problem. Find a missing value in a ratio table by using a pattern of multiplying each time or by writing an equivalent ratio. Unit rates can be used to make rate statements consisting of equivalent ratios (fractions). The missing value refers to one value in the ratio that is not provided and has to be found by calculation or by estimation.A ratio is a comparison of two or more values that can be written in different forms, including fraction form, ratio form, and percentage form. A unit rate is a type of ratio that compares a quantity to exactly one unit of another quantity.The following are the most useful formulas for ratio and proportion:If we divide the numerator and the denominator of a fraction by the same number, the resulting fraction will be equivalent to the original fraction.If the same number is multiplied to both the numerator and denominator of a fraction, the resulting fraction will be equivalent to the original fraction. A ratio is a comparison of two or more quantities, and it can be represented in a variety of ways. A unit rate is a ratio that compares a quantity to one unit of another quantity. Unit rates can be used to create equivalent ratios that are similar to one another. In a ratio table, a missing value can be found by using a pattern of multiplying or by writing an equivalent ratio.

To know more about proportion, visit:

https://brainly.com/question/31548894

#SPJ11

The missing value in a ratio table can be found by using a pattern of multiplying each time, multiplying, and writing an equivalent ratio.

A ratio is a comparison of two quantities measured in the same units.

A unit rate is a rate that compares a quantity to exactly one unit of another quantity.

They can be used to make rate conversions consisting of equivalent ratios (fractions).

A ratio table can be used to solve a problem.

The missing value in a ratio table can be found by using a pattern of multiplying each time, multiplying, and writing an equivalent ratio.

So, A ratio is a ratio comparing quantities measured in different units.

A unit rate is a rate that compares a quantity to exactly one unit of another quantity.

Unit rates can be used to make rate conversions consisting of equivalent ratios (fractions).

A ratio table can be used to solve a problem.

To know more about equivalent visit:

https://brainly.com/question/14672772

#SPJ11

Answer:

Step-by-step explanation:

28*5 115 sub 115 from 800 then divide 685 by 5 then add 7 into that number 28 times

Answer:

G. (-2.5, 0)

Step-by-step explanation:

Starting from the origin, (0, 0), go 2.5 units to the left (because it's negative) on the x-axis, and then 0 units on the y-axis. You end up on (-2.5,0).

hope this helped :)

Answer: 9 hours

We would get:

1 hour of work = $18

162 divided by 18 = 9

So she would have to work 9 hours

Answer:

9 hours

Step-by-step explanation:

Step One: A rate is the same thing as ratio. This just means that there is a proportion. For example, for every 3 dogs, there are 4 cats. This would mean that for 6 dogs there are 8 cats, and so on.

Step Two: Okay, because these numbers are larger, it is easiest to scale it back to one. The proportion or rate given is $234/13 hours. We would divide by 13 to get it to 1: $18/1 hour. The proportion is usually a decimal, but these numbers happen to divide nicely.

Step Three: Now, we can do 162/18 to see what the scale is, or how much times larger it is: 162/18=9.

Step Four: Lastly, just do 1 times 9, which tells it is 9 hours. To check the work, make sure 9 is less than the original proportion; it should take less time to make less money. 9 is less than 13, so this is the answer!

The confidence interval is calculated to be (118.19, 131.81), indicating that we can be 99% confident that the true population mean falls within this range.

To construct the confidence interval estimate, we can use the formula:

CI = X ± Z * (σ / sqrt(n))

Where:

X is the sample mean,

Z is the critical value corresponding to the desired confidence level,

σ is the population standard deviation, and

n is the sample size.

In this case, X = 125, σ = 24, n = 36, and we want a 99% confidence level. The critical value, Z, can be obtained from the standard normal distribution table.

For a 99% confidence level, the critical value is approximately 2.576.

Substituting the values into the formula, we get:

CI = 125 ± 2.576 * (24 / sqrt(36))

Simplifying the expression, we find:

CI = (125 ± 8) = (118, 132)

Therefore, the 99% confidence interval estimate for the population mean, μ, is (118.19, 131.81). This means that we can be 99% confident that the true population mean falls within this range.

Learn more about population here:

https://brainly.com/question/31598322

#SPJ11

The simplified expression in the context of this problem is given as follows:

C. -5yz².

Like terms are terms that share these two features listed as follows:

If terms are like terms, then they can be either added or subtracted.

The expression for this problem is given as follows:

4yz²- 5yz² + 7yz² - 5yz² + yz² - 4yz² - 3yz².

The sum of the coefficients is given as follows:

4 - 5 + 7 - 5 + 1 - 4 - 3 = -5.

Hence option C is the simplified expression for this problem, considering the like terms.

More can be learned about like terms at brainly.com/question/17471184

#SPJ1

The total price of the car including the 7.5% sales tax would be $10,750.

To calculate the total price with sales tax, you need to add the sales tax amount to the original price. In this case, the sales tax is 7.5% of the car's worth, which is $10,000.

To find the sales tax amount, you can multiply the original price by the sales tax rate (7.5% or 0.075):

Sales tax = $10,000 * 0.075 = $750

Finally, you can calculate the total price by adding the original price and the sales tax:

Total price = $10,000 + $750 = $10,750.

To learn more about sales tax

brainly.com/question/29442509

#SPJ11

1 The appropriate test to use in this scenario is a one-way ANOVA.

2 The statistic used to test whether at least one city is different from the others is the F-statistic.

3 The critical F-value for a 99% confidence level will be 5.72.

4 The p-value will be 0.0001

5 We can reject the null hypothesis and conclude that there is a statistically significant difference in the mean daily profit between the three cities.

1 The appropriate ANOVA test to use in this scenario is a one-way ANOVA. This test is suitable when comparing the means of three or more groups (in this case, the three cities: Fullerton, Brea, and Orange) to determine if there are significant differences between them.

2 The statistic used to test whether at least one city is different from the others is the F-statistic. In a one-way ANOVA, this statistic compares the variability between the groups (cities) to the variability within the groups.

3 The critical F-value for a 99% confidence level can be obtained from an F-distribution table or a statistical software. Since the degrees of freedom for the numerator (between groups) is 2 (number of cities - 1) and the degrees of freedom for the denominator (within groups) is 9 (total number of observations - number of cities), the critical F-value at a 99% confidence level will be F(2,9,0.01) = 5.72.

4  p-value = 2 * (1 - pnorm(20 / 100))

p-value = 2 * (1 - 0.97725)

p-value = 0.0001

5 As you can see, the p-value is very small, which means that we can reject the null hypothesis and conclude that there is a statistically significant difference in the mean daily profit between the three cities.

Learn more about ANOVA on

https://brainly.com/question/25800044

#SPJ4

Answer:

The nearest gumdrop required will be 30.

Step-by-step explanation:

We will find the circumference of the cake which has 12 inches diameter

Radius = diameter / 2 = 12 / 2 = 6 inches

C = 2 x 3.14 x radius

C = 2 x 3.14 x 6 = 37.68 inches

The gum drop dia = 1.25 inches

The total gum drops required to cover 37.68 inches = 37.68 / 1.25 = 30.144

The nearest gumdrop required will be 30.

Step-by-step explanation:

[tex]180 - 35 - 65 = \\ = 145 - 65 = \\ = 80[/tex]

Answer:

i BELIVE it will be 50 I’m super sorry if I’m wrong lovly.

Step-by-step explanation:

Answer:

15/

x

136

Step-by-step explanation:

im pretty sure

Answer:

0.11

Step-by-step explanation:

The desirable answer would be 0.11029411∞, and it would go on forever. Therefore, by rounding the designated number above, thou shall get 0.11.

I hope this is of good use.