Jorge tightens a bolt on his bicycle with a wrench that is 0.20 m long. If he pulls perpendicularly on the end of the wrench with a force of 140 N, how much torque does he apply ?

Answers

Answer 1

Answer:

28Nm

Explanation:

Torque is expressed as the prduct of force and radius

Given

Force = 140N

radius  = 0.20m

Torque = 140 * 0.2

Torque = 140 * 1/5

Torque = 28Nm

Hence the amouunt of torque applied is 28Nm


Related Questions

Explain how frequency and amplitude affect sound vibrations?

Answers

Answer:

The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.

Explanation:

Write a short paragraph about Fruit and Seed formation of Strawberry plants.

Answers

the above person is correct!

Un proyectil es lanzado con un ángulo de 30⁰ y una velocidad inicial de 20m/s ¿cual es el punto más alto de su trayectoria? ¿cual es su alcanzar horizontal? ¿cuánto tiempo está en el aire¿

Answers

Answer:

Thus, the horizontal range is 17.7 m, and the maximum height is 10.2 m.

Explanation:

velocity of projection, v = 20 m/s

Angle of projection, A = 30 degree

The horizontal range is

[tex]R =\frac{v^{2}sin2A}{g}\\R=\frac{20\times 20\times sin60}{2\times 9.8}\\R=17.7 m[/tex]

The maximum height is

[tex]H =\frac{v^{2}sin^{2}A}{2g}\\H=\frac{20\times 20\times sin^{2}30}{9.8}\\H=10.2 m[/tex]

Define greenhouse gases with examples.

Answers

Manmade or Natural gases which are contributing to greenhouse effect by absorbing the heat and warming the planet.

These gases are carbon dioxide, methane, water vapor, and nitrous oxide which occur naturally and unnaturally in nature

some examples are like excess and unnecessary use of petroleum products leads to increase the amount of greenhouse gases in nature.

Deforestation and cutting trees also lead to increase the greenhouse gases in environment.


A circuit has a current of 3 amps and is using a 9 volt battery. The circuit has a resistance of ____
ohms.

Answers

Answer:

so 9/3=3 current is 3 amperes

Explanation:

The fomula to calculate resistance is:

voltage/cutrent

9 V/3 A= 3 ohms

What is the difference between Mass and Weight?

Why do we use mass instead of weight?

Answers

Mass is a measure of how much force it will take to change that path. ... Weight, on the other hand, is a measure of the amount of downwards force that gravity exerts on an object. This force increases with the object's mass: the more inertia it has, the harder gravity pulls.
In scientific contexts, mass is the amount of "matter" in an object (though "matter" may be difficult to define), whereas weight is the force exerted on an object by gravity.

At apogee the moon is at its farthest from earth and thus appears smaller than normal. Because of this it has the smallest angular size in the sky at this time. At apogee the moon is at its farthest from earth and thus appears smaller than normal. Because of this it has the smallest angular size in the sky at this time. True False

Answers

Answer:

the statement is FALSE

Explanation:

In the movement of celestial bodies the most common orbit is the ellipse, in this the sun orbits or in this case the planet Earth is in a focus and the lighter body rotates around in a closed orbit.

The closest point is called perigee and the farthest apogee, but throughout the movement the kinetic moment must be conserved, so at the farthest point the speed decreases so that the angular momentum remains constant since the radius is greater.

 

This phenomenon is also described in Kepler's second law as that the areas must be equal in equal periods of time, so the speed decreases when being further from the Earth.

Consequently the statement is FALSE

What force is exerted on a machine? output force work input work output input force

Answers

Answer:

output force is exerted on a machine

Answer:

output force is exerted in the machine , i guess

which way would 2 negatively charged balloons naturally move? what would that do to the amount of potential energy stored in the field?

Answers

Answer:

gsg

Explanation:

The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.

What is force of repulsion?

The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.

In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.

The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.

Find more on electrostatic repulsion:

https://brainly.com/question/24013868

#SPJ2

Monochromatic light of wavelength lambda, such as light from a laser, is directed through two narrow parallel slits that are a distance d apart. There is a viewing screen a very long distance R away from the slits that is used to observe the interference pattern that emerges from the light shining through the slits. The distance that light travels from one slit to the screen is r1 and the distance that light travels from the other slit to the screen is r2. The central bright fringe of the interference pattern results due to a path difference, r1 – r2, of zero. What path difference is required to produce the first order bright fringe that is adjacent to the central bright fringe?

Answers

Answer:

When r1 – r2 equal the wavelength of the monochromatic light

Explanation:

This is because to observe a bright fringe a constructive interference pattern of path difference, r1 – r2 = mλ is observed, where m is an integer and λ = wavelength of monochromatic light.

For bright fringes and thus constructive interference, r1 – r2 must be integral multiples of the wavelength, λ. When r1 – r2 , we have the central bright fringe and thus m = 0.

The first order bright fringe which is adjacent to the central bright fringe is obtained when m = 1,

So r1 – r2 = 1 × λ

r1 – r2 = λ

Thus, the path difference required to produce the first order bright fringe that is adjacent to the central bright fringe is when r1 – r2 = λ, the wavelength of the monochromatic light.

Solve for resistance. I do not get it. Pls help

Answers

Answer: I think a

Explanation:

what is force of gravity​

Answers

Answer:

On Earth all bodies have a weight, or downward force of gravity, proportional to their mass, which Earth's mass exerts on them. Gravity is measured by the acceleration that it gives to freely falling objects. At Earth's surface the acceleration of gravity is about 9.8 metres (32 feet) per second per second.

f the voltage in a circuit is 80 volts and the resistance is 20 ohms, what is the current?

Answers

I = 4 A

Explanation:

From Ohm's law, the voltage is given by

V = IR

or

I = V/R = (80 V)/(20 ohms)

= 4 A

write a short note on Andromeda galaxy.​

Answers

Answer:

[tex]\sf\pink{Andromeda \: galaxy}[/tex]

The Andromeda is a galaxy which is nearest to the milky way. It is also named as Messier 31 or M31 or NGC 224. It is a spiral galaxy located at a distance of approximately 2.5 million light years from earth.

another name Andromeda in Hindi is Vaikunth.

Explanation:

The Andromeda Galaxy (IPA: /ænˈdrɒmɪdə/), also known as Messier 31, M31, or NGC 224 and originally the Andromeda Nebula (see below), is a barred spiral galaxy approximately 2.5 million light-years (770 kiloparsecs) from Earth and the nearest major galaxy to the Milky Way.

Number of stars: ~1 trillion (1012)

Right ascension: 00h 42m 44.3s

The primary coil of a transformer has 411 turns; the secondary coil has 1000 turns. An alternating current is sent through the primary coil. The emf in the primary is of amplitude 11.7 V. What is the emf amplitude in the secondary

Answers

Answer:

The emf amplitude in the secondary coil is 26.53 V

Explanation:

Given that,

The number of turns of the primary coil of a transformer = 441

The number of turns of the secondary coil of a transformer = 1000

The emf in the primary is of amplitude 11.7 V

We need to find the emf amplitude in the secondary. We know that,

[tex]\dfrac{E_1}{N_1}=\dfrac{E_2}{N_2}\\\\E_2=\dfrac{E_1N_2}{N_1}[/tex]

Put all the values,

[tex]E_2=\dfrac{11.7\times 1000}{441}\\\\E_2=26.53\ V[/tex]

So, the emf amplitude in the secondary coil is 26.53 V.

The two scientists who gave us a better understanding of the universe are?

Answers

Answer:

I'm pretty sure it is Edwin Powell Hubble and Albert Einstein

Explanation:

A student applies a 10 N force to a wood block with a mass of 5 kg. The block is pushed across four different surfaces. The accelerations of the block are recorded. Which surface showed the least friction?

Answers

The complete question is as follows: A student is subjected to a reaction force of 10 N northward from a 5 kg block while pushing the block over a smooth, level surface. Ignoring friction, what is the acceleration of the block?

Answer: The acceleration of the block is [tex]2 m/s^{2}[/tex].

Explanation:

Given: Force = 10 N

Mass = 5 kg

It is known that force applied on an object is the product of mass and acceleration.

Mathematically, [tex]F = m \times a[/tex]

where,

F = force

m = mass

a = acceleration

Substitute the values into above formula as follows.

[tex]F = m \times a\\10 N = 5 kg \times a\\a = \frac{10}{5}\\= 2 m/s^{2}[/tex]

Thus, we can conclude that the acceleration of block is [tex]2 m/s^{2}[/tex].

(give the answer or I'll report) please solve it with the steps​

Answers

Answer:

The required elastic potential energy is 0.068J

Explanation:

Given,

Spring force constant, k= 3.4 N/M

Spring stretch length/ Displacement, x= 0.2m

We know,

Elastic potential energy, V= [tex]\frac{1}{2} kx^{2}[/tex]

                                           =[tex]\frac{1}{2}*3.4*(0.2)^{2}[/tex]

                                           =[tex]\frac{0.136}{2}[/tex]

                                           =0.068

∴The required elastic potential energy is 0.068J

What is kinetic energy formula???​

Answers

Answer :— Kinetic energy is directly proportional to the mass of the object and to the square of its velocity: K.E. = 1/2 m v2. If the mass has units of kilograms and the velocity of meters per second, the kinetic energy has units of kilograms-meters squared per second squared.

[tex] \\ [/tex]

Hope you understand :)

Answer:

Explanation:

Kinetic energy (K.E)=1/2*mass*velocity^2

hmm.....................​

Answers

Answer:

could you please translate this

Explanation:

may try to help

Answer:

hmm

Explanation:

AMIAMO, MO SHINDAUO

The Doppler shift can be observed when ____________. Check all that apply. Group of answer choices the source of sound moves towards an observer the source of sound moves away from an observer an observer moves towards a stationary sound source an observer moves away from a stationary sound source the observer and sound source move at the same speed in the same direction the observer and sound source move at the same speed towards one another none of these

Answers

Answer:

the source of sound moves towards an observe

Explanation:

The Doppler effect is related to waves such as sound or light. the effect causes an increase or decrease in the frequency of sound light or other waves when the souces either move towards or away from the observer. For example the siren of the train to a person on the platform, the redshift seen by astronomers.

Therefore, The Doppler shift can be observed when the source of sound moves towards an observer From a place closer to the observer than the last wave's crest, each consecutive wave crest is sent. Each wave therefore, takes a little less time than the preceding wave to reach the observer.

Waves that are completely out of phase will experience destructive interference.
True
or
False​

Answers

Answer:

True

Explanation:

As far as I know, constructive interference means waves are "in phase" and destructive interference means the waves are "out of phase"

Answer:

true

Explanation:

destructive interference occurs when two identical waves are superimposed exactly out of phase.

11. (a)What downward force is acting on you when you go down a waterslide? (b)What type of friction is
present? (c)If the waterslide were dry explain what type of friction in would be and (d)how that
changes your speed? (4 points)

Answers

Answer:

a) "gravitation" is the force causing you to go down a waterslide

b) It is "fluid friction" as a solid object (our body) moves over a fluid (the water)

c) It would become "sliding friction" since two solid surfaces slide over each other

d) fluid friction being the weakest friction, switching to sliding friction means a higher decrease in speed and therefore removing the water from a slide will decrease our speed

riding a bicycle and using of wheelbarrow (kariton) are example of
A.fluid friction
B.rolling friction
C.sliding friction
D.static friction​

Answers

Im pretty sure its Rolling friction also know as rolling resistance
B it was i say let me know if it helps!

An object moving at a constant velocity will always have a

Answers

Answer:

It will always have a zero acceleration

When an object is moving with constant velocity, it does not change direction nor speed

0 acceleration

As elevation increases, temperature decreases. At which elevation will sound travel fastest? 500 meters 1,000 meters 1,500 meters 2,000 meters

Answers

Answer:

500 meters

Explanation:

Sound travels faster in warmer air because the air particles have more kinetic energy. The highest temperature air is found at the lowest altitude, therefore 500 meters is the elevation that sound travels the fastest from the options provided.

Answer:

500 meters

Explanation:

Q 36 - URGENT HELP PLS
WILL BE MARKED AS BRAINLIEST.

Answers

The answer is B.

This is because you add up all of the times (1.44s+1.70s+1.58s+1.76s) and you get 6.48 then you divide 6.48 by 4 to get the average of the times. Now you get the distance (200m) and because speed=distance/time you divide 200m/1.62s to get 123m/s. I hope this made sense :)

How to keep my family safe during a hurricane?

Answers

Answer:

there are many ways

Explanation:

first off get flashlights if power goes out your in trouble second stay indoors if you are traveling and a hurricane alert goes off just go in a carvel or something. 3rd try to get to a shelter if no store near by or if your on a mobile house. 4th board up your windows. 5th get some food(things that have long shelf life) if the house falls and you have no access to your food then its over. 6 get first aid if the hurricane hits your house and its collapses on you and your injured you need treatment. 7th radio the hurricane is 99% of the time going to knock down the internet poles you need updated info on the hurricane.

The ratio of the number of pigs to the number of horse in a farm is 2 to 3 (2:3), if therected are 24 horses, what is the number of pigs?

Answers

Answer:

16 pigs

Explanation:

Let the horses be H.

Let the pigs be P

Let the total number of animals be x.

Given the following data;

Ratio of P to H = 2:3 = 2 + 3 = 5

Number of horses = 24

To find the number of pigs;

First of all, we would determine the total number of animals x.

From the ratio of horse, H:

3/5 * x = 24

Cross-multiplying, we have;

3x = 120

x = 120/3 = 40

Next, we find the number of pigs;

Pigs = 2/5 * 40

Pigs = 80/5 = 16 pigs

What is velocity?
Please don't answer and let joinbrainly answer. Thank you. ​

Answers

Answer:

The rate of change in position of an object with respect to time, and displacement is called velocity.

Other Questions
Determine the mode of the following data set:-- 3, 12, 5, 12, 11, 2, 3, 10, 7, 6, 1, 4a. 12b. 3 and 12c. no moded. 5 Ponyboy is very concerned with hisappearance. What lines from the chapter weread indicate this to you? Also, how are youlike Ponyboy in this aspect? What is the size of the blue angle, and what do we call an angle with these measurements? Polar bonds share electrons _______. Yuan recently completed his college degree and is entering the labor market for the first time. He has been submitting applications and has been interviewed twice in the last two weeks, but so far has not found a job. Yuan could be classified as If f(y) = 8 + e-9y, find f'(y). Use exact values. Determine the scale factor.A6-43BB12.08 9 X3 4 5 6D-2D'C'Your answer Whats the product of 4 5 2 ______ 3 6 Also can someone tell me what product means in this situation Im confused? PLEASE HELPS ASAP!! ILL GIVE BRAINLIEST AND A THANKS!! What is the area of a circle with a radius of 3/8 meters? Whatis the major engine driving the planet's constant evolution and contains a geological record of much of the Earth's history1. Mantle2. Crust3. Inner Core4. Outer Core meow :3 help me plsss 30 ft.6 ft.4 ft.20 ft.?25 ft.PLEASE HELP QUICK Help me please I need to ge tthis done so can get an a HELP ASAP PLEASE !which cancer types are more likely to metastasize and which ones are more likely to stay in one place?bladder, brain, breast, cervix, colon, kidney, liver, lung, melanoma, ovary, prostate, stomach Magdeline wants to know if the number of words on a page in her art book is generally more than the number of words on a page in her science book. She takes a random sample of 25 pages in each book and then calculates the mean, median, and mean absolute deviation for the 25 samples of each book.Book Mean Median Mean Absolute DeviationArt 68.7 50 15.4Science 54.2 55 7.9She claims that because the mean number of words on each page in the art book is greater than the mean number of words on each page in the science book, the art book has more words per page. Based on the data, is this a valid inference? Which details from the text support the central idea of the passage? Check all that apply STION 6*What is the value of x, if x = 32? Write a balanced chemical equation for the reaction. Na2CO3Na2CO3 and AgNO3AgNO3 Express your answer as a chemical equation. Identify all of the phases in your answer. Questions to ask frank from the movie catch me if you can An issue that brought socialists together in the nineteenth century was Group of answer choices the desire to improve working and living conditions for most workers. a fear that Marxism would submerge the socialist alternatives. revisionism. nationalism.