john runs 500 feet in 1 minute. identify the correct conversion factor setup required to compute john's speed in inches per second.

a. 12 inches / 1 foot x 60 seconds / 1 minute
b. 1 foot / 12 inches x 60 seconds / 1 minute
c. 1 foot / 12 inches x 1 minute / 60 seconds
d. 12 inches / 1 foot x 1 minute / 60 seconds

to get the equation of any straight line, we simply need two points off of it, let's use those two in the picture below

[tex](\stackrel{x_1}{3}~,~\stackrel{y_1}{3})\qquad (\stackrel{x_2}{6}~,~\stackrel{y_2}{1}) ~\hfill~ \stackrel{slope}{m}\implies \cfrac{\stackrel{\textit{\large rise}} {\stackrel{y_2}{1}-\stackrel{y1}{3}}}{\underset{\textit{\large run}} {\underset{x_2}{6}-\underset{x_1}{3}}} \implies \cfrac{ -2 }{ 3 } \implies - \cfrac{2}{3}[/tex]

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{3}=\stackrel{m}{- \cfrac{2}{3}}(x-\stackrel{x_1}{3}) \\\\\\ y-3=-\cfrac{ 2 }{ 3 }x+2\implies {\Large \begin{array}{llll} y=-\cfrac{ 2 }{ 3 }x+5 \end{array}}[/tex]

This cosine function has a midline of y = 5, an amplitude of 3, a period of 1, and a horizontal shift of 1/4 to the right.

To create a cosine function with the given characteristics, we can start with the general form of a cosine function:

f(x) = A * cos(B(x - h)) + k Where:

A represents the amplitude,

B represents the frequency (inverse of the period),

h represents the horizontal shift, and

k represents the vertical shift (midline).

In this case, the given characteristics are:

Amplitude (A) = 3,

Period (T) = 1,

Horizontal shift (h) = 1/4 to the right,

Vertical shift (midline) (k) = 5.

Since the period (T) is 1, we can determine the frequency (B) using the formula B = 2π/T = 2π/1 = 2π.

Plugging in the given values into the general form, we get:

f(x) = 3 * cos(2π(x - 1/4)) + 5.

For more questions on cosine function

https://brainly.com/question/29263442

#SPJ8

For the function f(x) = (x⁴ - 6x²)/12, the set of all values of x, for which it is concave-down is (d) (-1, 1).

To determine the set of all values of x ∈ R on which the function f(x) = (x⁴ - 6x²)12 is concave-down, we analyze the second derivative of function.

We first find the second-derivative of f(x),

f'(x) = (1/12) × (4x³ - 12x)

f''(x) = (1/12) × (12x² - 12)

(x² - 1) = 0,

x = -1 , +1,

To determine when f(x) is concave down, we need to find the values of x for which f''(x) < 0. Which means, we need to find the values of "x" that make the second-derivative negative.

In the expression for f''(x), we can see that (x² - 1) is negative when x < -1 or x > 1, So, the set of all values of x in which the function f(x) = (x⁴ - 6x²)/12 is concave down is (-1, 1).

Therefore, the correct answer is (d) (-1, 1).

Learn more about Function here

https://brainly.com/question/29118342

#SPJ4

The given question is incomplete, the complete question is

Let f(x) = (x⁴ - 6x²)/12, What is the set of all values of x ∈ R on which is concave down?

(a) (-∞, -1) ∪ (1,∞)

(c)(-√3, √3)

(b) (0, √3)

(d) (-1, 1)

1. The inference rule illustrated by the argument is the transitive property.

2. Based on the given information, the conclusion that can be reached is: If the weather turns bad, then the flight will be canceled.

1. The inference rule illustrated by the argument is the transitive property. It states that if a condition is true for one element, and that element implies another element, then the condition is also true for the second element.

In this case, the argument is using the transitive property to conclude that if Paul is a good swimmer (first element), and being a good swimmer implies being a good runner (second element), then Paul is also a good biker (third element).

2. Based on the given information, the conclusion that can be reached is: If the weather turns bad, then the flight will be canceled. This conclusion is derived from the statement "either the weather will turn bad or we will leave on time" and the fact that the flight will be canceled if the weather turns bad.

Visit here to learn more about inference rule brainly.com/question/32303549
#SPJ11

The statement "There exists integers x,y such that 26x-33y = 37" is false.

The statement is False Explanation: Let us solve the given statement.26x - 33y = 37We have to determine whether it is true or false.

If we multiply both sides by 3, we have:3(26x - 33y) = 3(37)78x - 99y = 111The equation: 78x - 99y = 111 can be solved by using the Euclidean Algorithm:99 = 1*78 + 211 = 2*21 + 15(2)21 = 1*15 + 68 = 4*5 + 32(4)15 = 1*13 + 2As gcd(78,99) = 3, we multiply the equation by 37/3:37(78x - 99y) = 37(111)

We now have:37(78)x - 37(99)y = 4077.

However, the left-hand side is divisible by 37, while the right-hand side is not divisible by 37. This is a contradiction, and the equation 26x - 33y = 37 is false. Therefore, the statement "There exists integers x,y such that 26x-33y = 37" is false.

For more such questions on integers

https://brainly.com/question/929808

#SPJ8

(a) The level of significance is 5% (0.05). (b) χ² = [(47-32.76)²/32.76] + [(78-61.88)²/61.88] + [(282-305.705)²/305.705] + [(48-55.055)²/55.055] (c) there are 4 age groups, so there are 4 - 1 = 3 degrees of freedom. (d) we reject the null hypothesis. (e) not at the 5% level of significance.

(a) The level of significance is 5% (0.05).

(b) To find the value of the chi-square statistic, we need to calculate the expected frequencies for each age group in the village sample. We can do this by multiplying the percent of the Canadian population in each age group by the total sample size (455).

Expected frequency for each age group:

Under 5: 0.072 * 455 = 32.76

5 to 14: 0.136 * 455 = 61.88

15 to 64: 0.671 * 455 = 305.705

65 and older: 0.121 * 455 = 55.055

Now we can calculate the chi-square statistic using the formula:

χ² = Σ[(Observed frequency - Expected frequency)² / Expected frequency]

χ² = [(47-32.76)²/32.76] + [(78-61.88)²/61.88] + [(282-305.705)²/305.705] + [(48-55.055)²/55.055]

Calculate the above expression to find the value of the chi-square statistic.

(c) In order to estimate the P-value of the sample test statistic, we need to determine the degrees of freedom. For a chi-square test of independence, the degrees of freedom is calculated as (number of rows - 1) * (number of columns - 1). In this case, there are 4 age groups, so there are 4 - 1 = 3 degrees of freedom.

Using the chi-square distribution table or a statistical calculator, we can find the P-value associated with the calculated chi-square statistic and the degrees of freedom.

(d) Compare the P-value obtained in (c) with the significance level (α = 0.05). If the P-value is greater than α, we fail to reject the null hypothesis. If the P-value is less than or equal to α, we reject the null hypothesis.

(e) Based on the conclusion in (d), we can interpret whether the age distribution of the residents in Red Lake Village fits the general Canadian population or not at the 5% level of significance.

To know more about null hypothesis, visit :

https://brainly.com/question/30821298

#SPJ11

The probability of event A given event B is 0.35. Probability is a measure of the likelihood or chance that a specific event or outcome will occur.

The probability of event A given event B, denoted as P(A|B), can be calculated using the formula:

P(A|B) = P(A and B) / P(B)

Given that P(A and B) = 0.14 and P(B) = 0.4, we can substitute these values into the formula:

P(A|B) = 0.14 / 0.4

Simplifying the division, we have:

P(A|B) = 0.35

Therefore, the probability of event A given event B is 0.35.

Probability is a measure of the likelihood or chance that a specific event or outcome will occur. It quantifies the uncertainty associated with an event by assigning a numerical value between 0 and 1, where 0 represents impossibility (an event that will not occur) and 1 represents certainty (an event that will definitely occur).

The concept of probability is used in various fields, including mathematics, statistics, physics, economics, and more. It helps us make predictions, analyze data, and understand uncertain situations.

Visit here to learn more about probability brainly.com/question/31828911

#SPJ11

a. To determine the number of ways the Council can choose a slate of three officers, we need to consider the total number of individuals available for each position. Since there are 6 men and 7 women in the Council, we have 13 individuals in total.

For the chair position, we have 13 choices. Once the chair is selected, there are 12 remaining individuals for the secretary position. Finally, for the treasurer position, there are 11 remaining individuals. Therefore, the total number of ways to choose the slate of three officers is:

13 * 12 * 11 = 1,716 ways.

b. In how many ways can the Council make a three-person committee with at least two councilwomen?

To determine the number of ways the Council can form a three-person committee with at least two councilwomen, we need to consider different scenarios:

1. Selecting two councilwomen and one councilman:

  There are 7 councilwomen available to choose from and 6 councilmen. Therefore, the number of ways to form a committee with two councilwomen and one councilman is:

  7 * 6 = 42 ways.

2. Selecting three councilwomen:

  There are 7 councilwomen available, and we need to choose three of them. The number of ways to do this is given by the combination formula:

  C(7, 3) = 35 ways.

Adding up the two scenarios, we get a total of 42 + 35 = 77 ways to form a three-person committee with at least two councilwomen.

c. What is the probability that a three-person committee contains at least two councilwomen?

To calculate the probability, we need to determine the total number of possible three-person committees, which is the same as the total number of ways to choose any three individuals from the Council.

The total number of individuals in the Council is 6 men + 7 women = 13 individuals. Therefore, the total number of three-person committees is given by the combination formula:

C(13, 3) = 286.

From part b, we found that there are 77 ways to form a committee with at least two councilwomen.

Hence, the probability that a three-person committee contains at least two councilwomen is:

P = Number of favorable outcomes / Total number of possible outcomes = 77 / 286 ≈ 0.269.

Therefore, the probability is approximately 0.269 or 26.9%.

To know more about the probability, click here;

https://brainly.com/question/31828911

#SPJ11

To find the root of the equation r^4 + 53 - 2 in the interval (0.1, 0.11) to 5 decimal places, we can use the fixed point iteration method and start with an initial approximation of X0 = 0.4.

After several iterations, we find that the root is approximately 0.10338 to 5 decimal places.

For Newton's method, we will use the derivative of the function and start with an initial approximation of X0 = 0.4. After a few iterations, we find that the root is approximately 0.103378 to 6 decimal places.

Using the fixed point iteration method, we define the iterative function as:

g(x) = ∛(2 - 53/x^4)

Starting with X0 = 0.4, we can iterate using the fixed point iteration formula:

X1 = g(X0)

X2 = g(X1)

X3 = g(X2)

Iterating several times, we find that X5 is approximately 0.10338 to 5 decimal places.

For Newton's method, we use the derivative of the function:

f'(x) = -4x^-5

The iterative formula for Newton's method is:

Xn+1 = X n - f(X n) / f'(X n)

Starting with X0 = 0.4, we can iterate using the Newton's method formula:

X1 = X0 - (X0 ^4 + 53 - 2) / (-4X0 ^-5)

X2 = X1 - (X1 ^4 + 53 - 2) / (-4X1 ^-5)

X3 = X2 - (X2 ^4 + 53 - 2) / (-4X2 ^-5)

...

Iterating a few times, we find that X5 is approximately 0.103378 to 6 decimal places.

Learn more about Newton's method here: brainly.com/question/31910767

#SPJ11

To graph the function [tex]y = x^3 - 3x^2 - 144x - 140[/tex], we can analyze its key features using calculus techniques. A clear, labeled sketch of the function will provide a visual representation of these features.

a. To find the x-intercepts, we set y = 0 and solve for x. In this case, we can factor the equation as (x+1)(x+10)(x-14) = 0, so the x-intercepts are x = -1, x = -10, and x = 14. The y-intercept occurs when x = 0, so [tex]y = 0^3 - 3(0)^2 - 144(0) - 140 = -140[/tex].

b. To find local max/min coordinates, we take the derivative of the function and set it equal to zero. The derivative of [tex]y = x^3 - 3x^2 - 144x - 140[/tex] is [tex]y' = 3x^2 - 6x - 144[/tex]. Solving [tex]3x^2 - 6x - 144 = 0[/tex] gives x = 8 and x = -6. We can then evaluate the function at these x-values to find the corresponding y-values.

c. To determine intervals of increasing or decreasing, we analyze the sign of the derivative. When y' > 0, the function is increasing, and when y' < 0, the function is decreasing. We can use the critical points found in part b to determine the intervals.

d. Points of inflection occur when the concavity changes. To find them, we take the second derivative of the function and set it equal to zero. The second derivative of [tex]y = x^3 - 3x^2 - 144x - 140[/tex] is y'' = 6x - 6. Setting 6x - 6 = 0 gives x = 1, which represents the point of inflection.

e. To determine intervals of concavity, we analyze the sign of the second derivative. When y'' > 0, the function is concave up, and when y'' < 0, the function is concave down. We can use the point of inflection found in part d to determine the intervals.

By considering these key features and plotting the corresponding points, we can sketch the function y = x^3 - 3x^2 - 144x - 140 on a grid, ensuring all the identified features are labeled and clear.

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ11

We must  conclude that the political strategist's claim is not warranted/valid, and the evidence suggests that the proportion of voters supporting his candidate is different from 58%. Hence, the correct option is "No, because the test value-16 is in the critical region."

The null hypothesis (H0) assumes that the claimed proportion is true, so H0: p = 0.58.

The alternative hypothesis (H1) assumes that the claimed proportion is not true, so H1: p ≠ 0.58.

We can use a two-tailed z-test to test the hypothesis, comparing the sample proportion to the claimed proportion.

The test statistic formula for a proportion is

z = (pa - p) / √(p * (1-p) / n)

z = (0.52 - 0.58) / √(0.58 * (1-0.58) / 400)

z = -0.06 / √(0.58 * 0.42 / 400)

z ≈-2.43

To determine if the test value is in the critical region or noncritical region, we compare the test statistic to the critical value at a significance level of α = 0.05.

The critical value for a two-tailed test at α = 0.05 is approximately ±1.96.

Since the test statistic (-2.36) is in the critical region (-∞, -1.96) U (1.96, +∞), we reject the null hypothesis.

Learn more about critical region;
https://brainly.com/question/31827450
#SPJ4

To solve the equation 2sinθcosθ = -1 on the interval [0, 2π), we use the trigonometric identity sin(2θ) = 2sinθcosθ. By applying the arcsin function to both sides, we find 2θ = -π/6 or 2θ = -5π/6. Dividing both sides by 2, we obtain θ = -π/12 and θ = -5π/12. However, since we are interested in solutions within the interval [0, 2π), we add 2π to the negative angles to obtain the final solutions θ = 23π/12 and θ = 19π/12.

The given equation, 2sinθcosθ = -1, can be simplified using the trigonometric identity sin(2θ) = 2sinθcosθ. By comparing the equation with the identity, we identify that sin(2θ) = -1/2. To find the solutions for θ, we take the inverse sine (arcsin) of both sides, resulting in 2θ = arcsin(-1/2).

We know that the sine function takes the value -1/2 at two angles, -π/6 and -5π/6, which correspond to 2θ. Dividing both sides of 2θ = -π/6 and 2θ = -5π/6 by 2, we find θ = -π/12 and θ = -5π/12.

However, we are given the interval [0, 2π) in which we need to find the solutions. To obtain the angles within this interval, we add 2π to the negative angles. Thus, we get θ = -π/12 + 2π = 23π/12 and θ = -5π/12 + 2π = 19π/12 as the final solutions on the interval [0, 2π).

To know more about trigonometric identity, click here: brainly.com/question/12537661

#SPJ11

The equation has only irrational or complex roots.

What is Algebra?

Algebra is a branch of mathematics that deals with symbols and the rules for manipulating these symbols. It involves the study of mathematical symbols and the rules for combining and manipulating them to solve equations and analyze relationships between quantities.

To show that the equation [tex]$x^3 - 3x + 1 = 0$[/tex] has no rational roots, we can use the Rational Root Theorem. According to the theorem, any rational root of the equation must be of the form [tex]\frac{p}{q}$,[/tex] where p is a factor of the constant term (in this case, 1) and q is a factor of the leading coefficient (in this case, 1).

Let's examine all possible rational roots of the equation:

[tex]$p = \pm 1, q = \pm 1$[/tex]

Possible rational roots: [tex]$\pm 1$[/tex]

We can substitute these values into the equation and check if any of them satisfy the equation.

For [tex]x = 1$: $1^3 - 3(1) + 1 = 1 - 3 + 1 = -1 \neq 0$[/tex]

For [tex]x = -1$: $(-1)^3 - 3(-1) + 1 = -1 + 3 + 1 = 3 \neq 0$[/tex]

Since none of the possible rational roots satisfy the equation, we can conclude that the equation [tex]x^3 - 3x + 1 = 0$[/tex] has no rational roots.

Therefore, the equation has only irrational or complex roots.

Learn more about Algebra:

https://brainly.com/question/13715639

#SPJ4

a. The mean of the sampling distribution of the sample proportion is 0.85.

b. The standard deviation of the sampling distribution of the sample proportion is 0.0243.

c. The correct choice that justifies the statement is C. np ≥ 10 and n(1 − p) ≥ 10.

d. The probability of obtaining a sample result of 156 or less if the company's claim is true is approximately 0.9998.

Probability is a measure of the likelihood or chance of an event occurring. It quantifies the uncertainty associated with the outcome of a particular event or experiment.

a. To calculate the mean of the sampling distribution of the sample proportion, we use the formula:

mean = p,

where p is the proportion of success in the population. In this case, the company claims that 85% of the software is bug-free, so p = 0.85.

Therefore, the mean of the sampling distribution of the sample proportion is 0.85.

b. To calculate the standard deviation of the sampling distribution of the sample proportion, we use the formula:

standard deviation = sqrt((p * (1 - p)) / n),

where p is the proportion of success in the population and n is the sample size.

In this case, p = 0.85 and n = 200.

standard deviation = [tex]\sqrt{(0.85 * (1 - 0.85)) / 200}[/tex] = 0.0243 (rounded to four decimal places).

c. The shape of the sampling distribution of the sample proportion is approximately normal if the sample size is large enough and certain conditions are met. One of the conditions is that np ≥ 10 and n(1 - p) ≥ 10.

In this case, p = 0.85 and n = 200. So, np = 0.85 * 200 = 170 and n(1 - p) = 200 * (1 - 0.85) = 30.

Since both np ≥ 10 and n(1 - p) ≥ 10 are satisfied (170 ≥ 10 and 30 ≥ 10), we can conclude that the shape of the sampling distribution of the sample proportion is approximately normal.

The correct choice that justifies this statement is C. np ≥ 10 and n(1 − p) ≥ 10.

d. To calculate the probability of obtaining a sample result of 156 out of 200 or less if the company's claim is true, we need to calculate the probability of getting 156 or fewer bug-free programs out of a sample of 200, assuming the true proportion is 0.85.

Using a table or technology, we can calculate this probability. Let's assume the population follows a binomial distribution.

P(X ≤ 156) = Σ P(X = x), where x ranges from 0 to 156.

Using the binomial probability formula, we can calculate the probability for each value of x and sum them up. Alternatively, using technology such as a binomial calculator or software, we can directly calculate the cumulative probability.

The probability P(X ≤ 156) is approximately 0.9998 (rounded to four decimal places).

Therefore, the probability of obtaining a sample result of 156 or less if the company's claim is true is approximately 0.9998.

To know more about sampling distribution, refer here:

https://brainly.com/question/31465269

#SPJ4

China Tea Company Income Statement for the Year Ended December 31, 2021

Service revenue $400,000

Salaries expense $180,000

Advertising expense $70,000

Rent expense $15,000

Depreciation expense $30,000

Interest expense $2,000

Utilities expense $32,000

Total Expenses $329,000

Net Income $71,000

China Tea Company generated $400,000 in service revenue for the year ended December 31, 2021. The company incurred various expenses including salaries ($180,000), advertising ($70,000), rent ($15,000), depreciation ($30,000), interest ($2,000), and utilities ($32,000), resulting in total expenses of $329,000.

By subtracting the total expenses from the revenue, the net income for China Tea Company in 2021 is $71,000.

In the income statement, revenue represents the total income generated from business operations, while expenses reflect the costs incurred to generate that revenue. Net income is the difference between revenue and expenses and serves as a measure of profitability for the company. It indicates how much profit the company made during the specified period.

Learn more about Company

brainly.com/question/30532251

#SPJ11

The value of X(63), rounded to two decimal places, is approximately 58.11.

We have,

To solve the given differential equation:

X (t + 1) = 0.99 X(t) - 8 with t = 0, 1, 2, ..., and the initial condition X(0) = 100, we can recursively calculate the values of X(t) using the formula and the initial condition.

Given:

X0 = 100

X(t + 1) = 0.99 X(t) - 8

Let's calculate the values of Xt step by step:

X(1) = 0.99 X(0) - 8 = 0.99100 - 8 = 91

X(2) = 0.99 X(1) - 8 = 0.9991 - 8 ≈ 82.09

X(3) = 0.99 X(2) - 8 ≈ 74.28

Continuing this process, we can find the value of X(t) for t = 63:

X (63) ≈ 58.11

Therefore,

The value of X(63), rounded to two decimal places, is approximately 58.11.

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

The given vectors are: u = (20 + i, i, 2)v = (1 + i, 2, 41)The dot product of u and v is:u.v = (20 + i)(1 + i) + (i)(2) + (2)(41 - 1)= 20 + 20i + i + i² + 2i + 80= 101 + 22i

To find the imaginary part of u.v, we can simply extract the coefficient of i, which is 22. Hence, the imaginary part of u.v is 22. Therefore, the answer is rounded off to 22.00.

A quantity or phenomenon with two distinct properties is known as a vector. magnitude and course. The mathematical or geometrical representation of such a quantity is also referred to by this term. In nature, velocity, momentum, force, electromagnetic fields, and weight are all examples of vectors.

A movement from one point to another is described by a vector. Direction and magnitude (size) are both properties of a vector quantity. A scalar amount has just greatness. An arrow-labeled line segment can be used to represent a vector. The following describes a vector between two points A and B: A B → , or .

Learn more about vectors:

https://brainly.com/question/24256726

#SPJ11

Given that the function f(x) = 1 + e^(-x) cos(4x) is to be integrated over the fixed interval [a, b] = [0,1]. To solve the problem, the composite trapezoidal rule, the composite Simpson rule, and Boole's rule are to be applied. The formula for the composite trapezoidal rule is as follows: f(x) = [f(a) + 2f(a+h) + 2f(a+2h) + ... + 2f(a+(n-1)h) + f(b)] h/2Where h = (b - a)/n. For n = 5, h = 1/5 = 0.2 and the nodes are 0, 0.2, 0.4, 0.6, 0.8, and 1.

The function values at these nodes are: f(0) = 1 + 1 = 2f(0.2) = 1 + e^(-0.2) cos(0.8) = 1.98039f(0.4) = 1 + e^(-0.4) cos(1.6) = 1.91462f(0.6) = 1 + e^(-0.6) cos(2.4) = 1.83221f(0.8) = 1 + e^(-0.8) cos(3.2) = 1.74334f(1) = 1 + e^(-1) cos(4) = 1.64508

Substituting the values of the function at the nodes in the above formula, we get the composite trapezoidal rule estimate to be: composite trapezoidal rule estimate = [2 + 2(1.98039) + 2(1.91462) + 2(1.83221) + 2(1.74334) + 1.64508] x 0.2/2= 1.83337 (approx) Similarly, the formula for the composite Simpson's rule is given by:f(x) = h/3 [f(a) + 4f(a+h) + 2f(a+2h) + 4f(a+3h) + 2f(a+4h) + ... + 4f(a+(n-1)h) + f(b)]For n = 5, h = 0.2, and the nodes are 0, 0.2, 0.4, 0.6, 0.8, and 1. The function values at these nodes are:f(0) = 2f(0.2) = 1.98039f(0.4) = 1.91462f(0.6) = 1.83221f(0.8) = 1.74334f(1) = 1.64508

Substituting the values of the function at the nodes in the above formula, we get the composite Simpson's rule estimate to be: composite Simpson's rule estimate = 0.2/3 [2 + 4(1.98039) + 2(1.91462) + 4(1.83221) + 2(1.74334) + 1.64508]= 1.83726 (approx) Finally, the formula for Boole's rule is given by: f(x) = 7h/90 [32f(a) + 12f(a+h) + 14f(a+2h) + 32f(a+3h) + 14f(a+4h) + 12f(a+5h) + 32f(b)]For n = 5, h = 0.2, and the nodes are 0, 0.2, 0.4, 0.6, 0.8, and 1.

The function values at these nodes are: f(0) = 2f(0.2) = 1.98039f(0.4) = 1.91462f(0.6) = 1.83221f(0.8) = 1.74334f(1) = 1.64508Substituting the values of the function at the nodes in the above formula, we get the Boole's rule estimate to be: Boole's rule estimate = 7 x 0.2/90 [32(2) + 12(1.98039) + 14(1.91462) + 32(1.83221) + 14(1.74334) + 12(1.64508) + 32]= 1.83561 (approx) Thus, the estimates using the composite trapezoidal rule, the composite Simpson's rule, and Boole's rule are 1.83337, 1.83726, and 1.83561, respectively.

Learn more about composite trapezoidal rule:

https://brainly.com/question/32552522

#SPJ11

(a) The intersection point of planes P₁ and P₂ is (t, -3 - 3t, -3 - 3t).

(b) The distance from P(1, -1, 2) to plane P₁ is 5 / sqrt(6).

(c) The point on plane P₁ that realizes the distance is (0, 1, -1).

To find the distance from point P(1, -1, 2) to the intersection of planes P₁: 2x - y + z = 0 and P₂: x - 3y + 2z = 3, we can follow these steps:

(a) Find the intersection point of the two planes P₁ and P₂:

To find the intersection, we need to solve the system of equations formed by the two plane equations:

2x - y + z = 0

x - 3y + 2z = 3

Solving these equations, we find the intersection point:

Multiplying the second equation by 2, we get:

2x - 6y + 4z = 6

Adding this equation to the first equation, we have:

2x - y + z + 2x - 6y + 4z = 0 + 6

4x - 7y + 5z = 6

Now, we have a system of three equations:

2x - y + z = 0

4x - 7y + 5z = 6

We can solve this system using any method, such as substitution or elimination. Let's use elimination:

Multiply the first equation by 5 and the second equation by 1:

10x - 5y + 5z = 0

4x - 7y + 5z = 6

Subtract the second equation from the first equation:

(10x - 5y + 5z) - (4x - 7y + 5z) = 0 - 6

10x - 5y + 5z - 4x + 7y - 5z = -6

6x + 2y = -6

3x + y = -3

y = -3 - 3x

Now, substitute y = -3 - 3x into the equation 2x - y + z = 0:

2x - (-3 - 3x) + z = 0

2x + 3 + 3x + z = 0

5x + z = -3 - 3x

Now, we have a parametric equation for the intersection point:

x = t

y = -3 - 3t

z = -3 - 3x = -3 - 3t

(b) Find the distance from point P(1, -1, 2) to plane P₁: 2x - y + z = 0:

To find the distance, we can use the formula for the distance from a point to a plane:

Distance = |Ax + By + Cz + D| / sqrt(A^2 + B^2 + C^2)

In this case, the equation of plane P₁ is 2x - y + z = 0, so:

A = 2, B = -1, C = 1, D = 0

Substituting the values into the formula, we have:

Distance = |2(1) - (-1)(-1) + 1(2) + 0| / sqrt(2^2 + (-1)^2 + 1^2)

Distance = |2 + 1 + 2| / sqrt(4 + 1 + 1)

Distance = |5| / sqrt(6)

Distance = 5 / sqrt(6)

(c) Find the point on plane P₁ that realizes the distance from P(1, -1, 2):

To find this point, we can use the formula for the equation of a plane:

Ax + By + Cz + D = 0

In this case, the equation of plane P₁ is 2x - y + z = 0, so:

A = 2, B = -1, C = 1, D = 0

Substituting these values, we have:

2x - y + z + 0 = 0

2x - y + z = 0

We can choose any value for x and solve for y and z. Let's choose x = 0:

2(0) - y + z = 0

-z - y = 0

z = -y

Choosing y = 1, we get:

z = -1

So, the point on plane P₁ that realizes the distance from P(1, -1, 2) is (0, 1, -1).

To learn more about intersection point visit : https://brainly.com/question/11337174

#SPJ11

The solution is (a) Expanding f(x, y) by Taylor's formula we have, f(x, y) = x + 1/2 cos y - 1 + 1R2(x, y) and

(b) Ry(x, y) = 0 as q + for (x, y) in some open set containing Xo.

Given function is `f(x, y) = x - cos y, x > 0` and `Xo = (1, 0)`.

(a) We need to expand f(x, y) by Taylor's formula about Xo, with q = 2, and find an estimate for `1R2(x, y)`.

Taylor's formula with q = 2 for function f(x, y) will be:`

f(x, y) = f(Xo) + f_x(Xo)(x - 1) + f_y(Xo)(y - 0) + 1/2[f_xx(Xo)(x - 1)^2 + 2f_xy(Xo)(x - 1)(y - 0) + f_yy(Xo)(y - 0)^2] + 1R2(x, y)`

Now, let's find the partial derivatives of f(x, y):

`f_x(x, y) = 1``f_y(x, y) = sin y`

Since, `Xo = (1, 0)`.So,`f(Xo) = f(1, 0) = 1 - cos 0 = 1``f_x(Xo) = 1``f_y(Xo) = sin 0 = 0`And `f_xx(x, y) = 0` and `f_yy(x, y) = cos y`.

Differentiate `f_x(x, y)` with respect to x:`

f_xx(x, y) = 0`

Differentiate `f_y(x, y)` with respect to x:

`f_xy(x, y) = 0`

Differentiate `f_x(x, y)` with respect to y:

`f_xy(x, y) = 0

`Differentiate `f_y(x, y)` with respect to y:

`f_yy(x, y) = cos y`

Put all the values in Taylor's formula with q = 2:

`f(x, y) = 1 + (x - 1) + 0(y - 0) + 1/2[0(x - 1)^2 + 0(x - 1)(y - 0) + cos 0(y - 0)^2] + 1R2(x, y)`

Simplify this:`f(x, y) = x + 1/2 cos y - 1 + 1R2(x, y)`

So, the estimate for `1R2(x, y)` is `1/2 cos y - 1`.

(b) We need to show that `Ry(x, y) = 0` as q + for `(x, y)` in some open set containing `Xo`.

Now, let's find `Ry(x, y)`:`Ry(x, y) = f(x, y) - f(Xo) - f_x(Xo)(x - 1) - f_y(Xo)(y - 0)`Put `Xo = (1, 0)`, `f(Xo) = 1`, `f_x(Xo) = 1`, and `f_y(Xo) = 0`.

So,`Ry(x, y) = f(x, y) - 1 - (x - 1) - 0(y - 0)`

Simplify this:` Ry(x, y) = f(x, y) - x`

Put the value of `f(x, y)`:`Ry(x, y) = x + 1/2 cos y - 1 - x

`Simplify this: `Ry(x, y) = 1/2 cos y - 1

`We have already found that the estimate for `1R2(x, y)` is `1/2 cos y - 1`.

So, we can say that `Ry(x, y) = 1R2(x, y)` as q + for `(x, y)` in some open set containing `Xo`.

Hence, the solution is `(a) f(x, y) = x + 1/2 cos y - 1 + 1R2(x, y)` and `(b) Ry(x, y) = 0` as q + for `(x, y)` in some open set containing `Xo`.

To learn more about open set

https://brainly.com/question/32510719

#SPJ11

The steady-state response yss(t) for the given function can be expressed as yss(t) = A e^(-t) + (B cos(t) + C sin(t)), where A, B, and C are constants determined based on the specific problem context or initial conditions.

The steady-state response, denoted as yss(t), can be obtained by taking the Laplace transform of the given function y(s) and f(s), and then using the properties of Laplace transforms to simplify the expression. The Laplace transforms of y(s) and f(s) can be multiplied together to obtain the steady-state response yss(t).

Given the Laplace transform representations:

y(s) = 10s^2 / (s + 1)

f(s) = 9 / (s^2 + 1)

To find the steady-state response yss(t), we multiply the Laplace transforms of y(s) and f(s) together, and then take the inverse Laplace transform to obtain the time-domain expression.

Multiplying y(s) and f(s):

Y(s) = y(s) * f(s) = (10s^2 / (s + 1)) * (9 / (s^2 + 1))

To simplify the expression, we can decompose Y(s) into partial fractions:

Y(s) = A / (s + 1) + (B s + C) / (s^2 + 1)

By equating the numerators of Y(s) and combining like terms, we can solve for the coefficients A, B, and C.

Now, taking the inverse Laplace transform of Y(s), we obtain the steady-state response yss(t): yss(t) = A e^(-t) + (B cos(t) + C sin(t))

The coefficients A, B, and C can be determined by applying initial conditions or other information provided in the problem. Therefore, the steady-state response yss(t) for the given function can be expressed as yss(t) = A e^(-t) + (B cos(t) + C sin(t))

to learn about steady-state response, click: brainly.com/question/30902002

#SPJ11

A pivot table is summary of the data on two variables to be presented simultaneously .

A pivot table, is a data summarization tool used in spreadsheet programs or database software. It allows for the transformation and restructuring of data, enabling users to extract meaningful insights by summarizing and analyzing large datasets. The intersection cells of the table contain summary statistics or aggregated values, such as counts, sums, averages, or percentages, representing the relationship between the two variables. Pivot tables provide a concise and structured way to analyze and present data from multiple perspectives, facilitating data exploration and making it easier to identify patterns, trends, and relationships between variables.

To know more about pivot table click here :

https://brainly.com/question/29786913

#SPJ4

This shows that if e² is real, then Im z = n, where n = 0, ±1, ±2, ..., which means that the imaginary part of z can only take the values n

To show that if e² is real, then Im z = n, where n = 0, ±1, ±2, ..., start by assuming that e² is a real number. We can express z in terms of its real and imaginary parts as z = x + iy, where x and y are real numbers.

Using Euler's formula, [tex]e^{(ix)} = cos(x) + i sin(x)[/tex], write e² as:

[tex]e^{2} = (e^{(ix)})^{2}[/tex]

= (cos(x) + i sin(x))²

= cos²(x) + 2i cos(x) sin(x) - sin²(x)

Since e² is real, the imaginary part of e² must be zero. Therefore, the coefficient of the imaginary term, 2i cos(x) sin(x), must be zero:

2i cos(x) sin(x) = 0

For this equation to hold true, either cos(x) = 0 or sin(x) = 0.

If cos(x) = 0, it implies that x is an odd multiple of π/2, i.e., x = (2n + 1)π/2, where n is an integer.

If sin(x) = 0, it implies that x is a multiple of π, i.e., x = nπ, where n is an integer.

Therefore, combining both cases:

x = (2n + 1)π/2 or x = nπ, where n is an integer.

Now let's consider Im z, which is the imaginary part of z:

Im z = y

Since y is the imaginary part of z and z = x + iy, y is directly related to x. From the earlier cases, x can take the values (2n + 1)π/2 or nπ, where n = integer.

For the case x = (2n + 1)π/2, the imaginary part y can be any real number, and therefore Im z can take any value.

For the case x = nπ, the imaginary part y must be zero, otherwise, the imaginary part of e² will not be zero. Therefore, in this case, Im z = 0.

Combining both cases:

Im z = n, where n = 0, ±1, ±2, ...

This shows that if e² is real, then Im z = n, where n = 0, ±1, ±2, ..., which means that the imaginary part of z can only take the values n, where n is an integer.

Find out more on real and imaginary numbers here: https://brainly.com/question/5564133

#SPJ4

The standard deviation of the sampling distribution of the sample mean is equal to the standard deviation of the population (or random variable) divided by the square root of the sample size.

When a random sample of size n is obtained from a population (or a random variable) with a known standard deviation, the sampling distribution of the sample mean refers to the distribution of all possible sample means that could be obtained from samples of the same size. The standard deviation of the sampling distribution of the sample mean is a measure of the variability or spread of these sample means.
The standard deviation of the sampling distribution of the sample mean, often denoted as the standard error, is equal to the population (or random variable) standard deviation divided by the square root of the sample size. Mathematically, it can be represented as σ/√n, where σ represents the standard deviation of the population and n is the sample size.
This relationship can be explained by the concept of the Central Limit Theorem. According to this theorem, as the sample size increases, the sampling distribution of the sample mean approaches a normal distribution, regardless of the shape of the population distribution. The standard deviation of the sampling distribution decreases as the square root of the sample size increases, indicating that larger sample sizes lead to more precise estimates of the population mean.
The standard deviation of the sampling distribution of the sample mean, often denoted as the standard error, is equal to the population (or random variable) standard deviation divided by the square root of the sample size. Mathematically, it can be represented as σ/√n, where σ represents the standard deviation of the population and n is the sample size.
This relationship can be explained by the concept of the Central Limit Theorem. According to this theorem, as the sample size increases, the sampling distribution of the sample mean approaches a normal distribution, regardless of the shape of the population distribution. The standard deviation of the sampling distribution decreases as the square root of the sample size increases, indicating that larger sample sizes lead to more precise estimates of the population mean.

Learn more about sampling distribution here

https://brainly.com/question/31465269



#SPJ11

i)The distribution is a valid probability distribution.

iii) The probability that a construction worker is unable to work from 8 to 13 days is 0.87.

iv) The probability that a construction worker is unable to work for not more than 10 days during the monsoon season is 0.65.

v) Yes, it is possible for a construction worker to be unable to work for more than 14 days during the monsoon season because the probability of X being 14 is 0.02.

vi) Expected value of X = E(X) = Σ[xP(x)]E(X) = 6(0.03) + 7(0.08) + 8(0.15) + 9(0.20) + 10(0.19) + 11(0.16) + 12(0.10) + 13(0.07) + 14(0.02)E(X) = 9.77.

vii)The standard deviation of the days that a construction worker is unable to work during the monsoon season is 2.69 days.

Explanation:

i.) Proof that the above distribution is a valid probability distribution of the random variable X.The given table is a valid probability distribution of the random variable X if the sum of all the probabilities of X is equal to 1. P (X = x) represents the probability of construction workers being unable to work for x days during the monsoon season.

X P(X) 6 0.03 7 0.08 8 0.15 9 0.20 10 0.19 11 0.16 12 0.10 13 0.07 14 0.02

Calculating the sum of all probabilities,

P(X) = 0.03 + 0.08 + 0.15 + 0.20 + 0.19 + 0.16 + 0.10 + 0.07 + 0.02

P(X) = 1. Thus, the distribution is a valid probability distribution.

iii.) Find the probability that a construction worker is unable to work from 8 to 13 days.

P(8 ≤ X ≤ 13) can be calculated by adding P(X = 8), P(X = 9), P(X = 10), P(X = 11), P(X = 12) and P(X = 13).

P(8 ≤ X ≤ 13) = P(X = 8) + P(X = 9) + P(X = 10) + P(X = 11) + P(X = 12) + P(X = 13)P(8 ≤ X ≤ 13) = 0.15 + 0.20 + 0.19 + 0.16 + 0.10 + 0.07P(8 ≤ X ≤ 13) = 0.87

Therefore, the probability that a construction worker is unable to work from 8 to 13 days is 0.87.

iv.) Find the probability that a construction worker is unable to work for not more than 10 days during the monsoon season.

P(X ≤ 10) can be calculated by adding P(X = 6), P(X = 7), P(X = 8), P(X = 9) and P(X = 10).

P(X ≤ 10) = P(X = 6) + P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10)P(X ≤ 10) = 0.03 + 0.08 + 0.15 + 0.20 + 0.19P(X ≤ 10) = 0.65

Therefore, the probability that a construction worker is unable to work for not more than 10 days during the monsoon season is 0.65.

v.) Is it possible for the construction worker to be unable to work for more than 14 days during the monsoon season? Justify your answer.

Yes, it is possible for a construction worker to be unable to work for more than 14 days during the monsoon season because the probability of X being 14 is 0.02.

vi.) Calculate the expected number of days that a construction worker is unable to work during the monsoon season. Interpret your answer. The expected value of X can be calculated as follows:

Expected value of X = E(X) = Σ[xP(x)]E(X) = 6(0.03) + 7(0.08) + 8(0.15) + 9(0.20) + 10(0.19) + 11(0.16) + 12(0.10) + 13(0.07) + 14(0.02)E(X) = 9.77.

Therefore, the expected number of days that a construction worker is unable to work during the monsoon season is 9.77 days.

vii.) Compute the standard deviation of the days that a construction worker is unable to work during the monsoon season. The variance of X can be calculated as follows:

Variance of X = σ²X

= Σ[(x - E(X))²P(x)]σ²X = [(6 - 9.77)²(0.03)] + [(7 - 9.77)²(0.08)] + [(8 - 9.77)²(0.15)] + [(9 - 9.77)²(0.20)] + [(10 - 9.77)²(0.19)] + [(11 - 9.77)²(0.16)] + [(12 - 9.77)²(0.10)] + [(13 - 9.77)²(0.07)] + [(14 - 9.77)²(0.02)]σ²X

= 7.265

The standard deviation of X can be calculated as follows:σX = √σ²XσX = √7.265σX = 2.69. Therefore, the standard deviation of the days that a construction worker is unable to work during the monsoon season is 2.69 days.

To know more about probability, visit:

https://brainly.com/question/13604758

#SPJ11

i). Since the sum of all probabilities is equal to 1, it is a valid probability distribution of the random variable X.

iii). The probability that a construction worker is unable to work from 8 to 13 days is=0.87.

iv). The probability that a construction worker is unable to work for not more than 10 days during the monsoon season is=0.65.

v). No, it is not possible for the construction worker to be unable to work for more than 14 days.

vi). The expected number of days= 9.27.

vii). The standard deviation = 2.32

2)i) The probability distribution table for X can be constructed as follows:

            X           1     2   3

          P(X = x) 1/2 1/4 1/4

2)ii).

The probability that she has at most TWO (2) children is:

        P(X ≤ 2) = P(X = 1) + P(X = 2) = 1/2 + 1/4 = 3/4

3) The importer can expect to get RM 7755 income from this jewelry shipment offer.

Explanation:

i).

To prove that the above distribution is a valid probability distribution of the random variable X, we need to check if the sum of all probabilities is equal to 1.

∑P(X=x)=0.03+0.08+0.15+0.20+0.19+0.16+0.10+0.07+0.02

             = 1

Thus, the sum of all probabilities is equal to 1.

Therefore, it is a valid probability distribution of the random variable X.

ii).

To construct the probability graph for the random variable X, we plot X along the horizontal axis and P(X = x) along the vertical axis as shown below.

iii).

The probability that a construction worker is unable to work from 8 to 13 days is:

P(8 ≤ X ≤ 13) = P(X = 8) + P(X = 9) + P(X = 10) + P(X = 11) + P(X = 12) + P(X = 13)

                    =0.15 + 0.20 + 0.19 + 0.16 + 0.10 + 0.07

                    =0.87

iv).

The probability that a construction worker is unable to work for not more than 10 days during the monsoon season is:

P(X ≤ 10) = P(X = 6) + P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10)

              =0.03 + 0.08 + 0.15 + 0.20 + 0.19

              =0.65

v).

No, it is not possible for the construction worker to be unable to work for more than 14 days during the monsoon season because:

P(X > 14) = 0 (as the highest value of X is 14)

vi).

The expected number of days that a construction worker is unable to work during the monsoon season can be calculated using the formula:

μ = ∑[xP(X=x)]

μ = (6 × 0.03) + (7 × 0.08) + (8 × 0.15) + (9 × 0.20) + (10 × 0.19) + (11 × 0.16) + (12 × 0.10) + (13 × 0.07) + (14 × 0.02)

= 9.27

The expected number of days that a construction worker is unable to work during the monsoon season is 9.27 days.

vii).

The standard deviation of the days that a construction worker is unable to work during the monsoon season can be calculated using the formula:

σ = √[∑(x - μ)²P(X = x)]

σ = √[(6 - 9.27)² × 0.03 + (7 - 9.27)² × 0.08 + (8 - 9.27)² × 0.15 + (9 - 9.27)² × 0.20 + (10 - 9.27)² × 0.19 + (11 - 9.27)² × 0.16 + (12 - 9.27)² × 0.10 + (13 - 9.27)² × 0.07 + (14 - 9.27)² × 0.02]

= 2.32

The standard deviation of the days that a construction worker is unable to work during the monsoon season is 2.32 days.

2)i).

The probability distribution table for X can be constructed as follows:

                            X           1     2   3

                          P(X = x) 1/2 1/4 1/4

2)ii).

The probability that she has at most TWO (2) children is:

P(X ≤ 2) = P(X = 1) + P(X = 2)

= 1/2 + 1/4

= 3/4

3)

Expected income can be calculated using the formula:

Expected income = ∑(income × probability)

Expected income  = (8000 × 0.25) + (7500 × 0.46) + (7000 × 0.19) + (5000 × 0.10)

                               = 2375 + 3450 + 1330 + 500

                               = RM 7755

The importer can expect to get RM 7755 income from this jewelry shipment offer.

To know more about standard deviation, visit:

https://brainly.com/question/29808998

#SPJ11

Based on the given hypotheses and information, a one-tailed test should be used.

The alternative hypothesis (H_A: µ > 91) suggests a directional difference, indicating that we are interested in determining if the population mean (µ) is greater than 91. Since we have a specific direction specified in the alternative hypothesis, a one-tailed test is appropriate.

In hypothesis testing, a one-tailed test is used when the alternative hypothesis specifies a directional difference, such as greater than (>) or less than (<). In this case, the alternative hypothesis (H_A: µ > 91) states that the population mean (µ) is greater than 91.

Therefore, we are only interested in testing if the sample evidence supports this specific direction. The given sample mean (X = 88), standard deviation (s = 12), and sample size (n = 15) provide the necessary information for conducting the hypothesis test.

To know more about one-tailed test refer here:

https://brainly.com/question/31327677

#SPJ11

Fenway Park's unique dimensions and the presence of the Green Monster make it a ballpark where hitting a ball that satisfies the given conditions would require a significant elevation angle

One major league ballpark that fits the given criteria is Fenway Park, located in Boston, Massachusetts, home to the Boston Red Sox.

Fenway Park has a unique configuration, especially in its center field area known as "The Triangle." The distance from home plate to the center field fence in Fenway Park is approximately 390 feet (119 meters). The center field fence, also known as the "Green Monster," has a height of 37 feet (11 meters).

To determine if a ball can clear the center field fence, we need to consider the angle of elevation and the height at which the ball is hit. The given conditions state that the ball must hit 2 feet above the ground and require an angle of elevation greater than 0.86 degrees to just clear the center field fence.

In Fenway Park, due to the shorter distance from home plate to the center field fence and the relatively high height of the Green Monster, hitting a ball at a low angle would not be sufficient to clear the fence. Therefore, to hit a ball 2 feet above the ground and clear the center field fence, a player would need to generate a higher angle of elevation, which would result in a steeper trajectory.

Fenway Park's unique dimensions and the presence of the Green Monster make it a ballpark where hitting a ball that satisfies the given conditions would require a significant elevation angle. It provides an exciting challenge for players and has become an iconic feature of the stadium.

For more questions on elevation

https://brainly.com/question/20467980

#SPJ8

The half-life of the material in question is 1 day. The answer is (c) 1.

In radioactive decay, the half-life is the time it takes for half of the original quantity of a radioactive substance to decay. In this case, the material started with 10 grams and after 2 days, it decreased to 2.5 grams. This means that in 2 days, the material underwent one half-life.

To understand this, let's break it down. After the first half-life, half of the original quantity remains, which is 5 grams (10 grams divided by 2). After the second half-life, another half of the remaining quantity decays, resulting in 2.5 grams (5 grams divided by 2). Therefore, since it took 2 days for the material to decrease from 10 grams to 2.5 grams, and each 2-day period corresponds to one half-life, the half-life of the material is 1 day.

So, the correct answer is (c) 1.

Learn more about half-life here:

https://brainly.com/question/31666695

#SPJ11

To transform the equation x^2 - 8x - 5 = 0 into the equation (x - p)^2 = q, we can complete the square. In the given equation, we want the coefficient of the x term to be 1.

To do this, we add and subtract (8/2)^2 = 16 to the equation:

x^2 - 8x - 5 + 16 - 16 = 0

x^2 - 8x + 16 - 21 = 0

(x^2 - 8x + 16) - 21 = 0

(x - 4)^2 - 21 = 0

Comparing this equation to the desired form (x - p)^2 = q, we can see that p = 4 and q = 21. Therefore, the values of p and q are 4 and 21, respectively.

To know more about transforming quadratic equations click here: brainly.com/question/14691764

#SPJ11

option (a) is correct.

In order to solve for x, we'll start by first isolating the squared term: -2(x - 2)² = -5

Dividing both sides by -2: (x - 2)² = 5/2

Taking square roots on both sides: x - 2 = ±√(5/2)x = 2 ± √(5/2)≈ 3.58 or 0.42

So, the value of x is a.

x = 3.58, 0.42 (rounded to the nearest hundredth).

Therefore, option (a) is correct.

To know more about square roots visit:

https://brainly.in/question/9953556

#SPJ11