Job A3B was ordered by a customer on September 25. During the month of September, Jaycee Corporation requisitioned $1,600 of direct materials and used $3,100 of direct labor. The job was not finished by the end of September, but needed an additional $2,100 of direct materials and additional direct labor of $5,600 to finish the job in October. The company applies overhead at the end of each month at a rate of 200% of the direct labor cost incurred. What is the total cost of the job when it is completed in October?

Multiple Choice:

$12,400

$18,900

$29,800

$22,000

$25,700

Blackjack is a popular card game where cards are assigned various point values. The missing probability in the table is 0.475. The correct option is c.

Simply put, the probability is the likelihood that something will occur. When we don't know how an event will turn out, we can discuss the likelihood or likelihood of several outcomes. Statistics is the study of events that follow a probability distribution.

The end goal is to get all three distributions to equal 1.

0.435 + 0.09 = 0.525

Subtract that from 1, and you will get 0.475

Therefore, the correct option is c, 0.475.

To learn more about probability, refer to the link:

https://brainly.com/question/30034780

#SPJ1

The question is incomplete. Your most probably complete question is given below:

0.525

0.565

0.475

0.91

Answer:

0.435

Explanation:

khan

Answer:

Life is for the living not the dead. Life is what you make it to be.

Explanation:

LIVE

Answer:

French Missionary

Explanation:

Answer:

False :)

Explanation:

give me brainliest pls i'd appreciate it

One of the main strengths regarding the biopsychosocial model is the ease of identifying symptoms, in order to make a diagnosis: False.

A biopsychosocial model can be defined as an inter-disciplinary model which analyzes and examines the relationship that exists between psychology, biology, and socio-environmental factors, so as to understand health, illness (disease), and human development.

In this context, we can infer and logically deduce that the ease of identifying symptoms in order to make a diagnosis isn't one of the main strengths regarding the biopsychosocial model.

Read more on biopsychosocial model here: https://brainly.com/question/4157133

#SPJ2

Answer:

VY = 68°

Explanation:

The Angle of Intersecting Chords Theorem states that the measure of the vertex angle formed inside the circle when two chords intersect is equal to ½ of the sum of the intercepted arcs.

Therefore:

55° = ½(42° + VY)

Multiply both sides by 2

2*55° = 42° + VY

110° = 42° + VY

110° - 42° = VY

68° = VY

VY = 68°

Answer:

C. Parent

Explanation:

Answer:

A. Female Relative

Explanation:

Answer on edge

Answer:

Without more context or information about the artwork in question, it is difficult for me to provide a justification for a specific piece of art. Art can be challenging to understand or relate to, and that is a normal and valid response. It is important to remember that art is a form of self-expression and can be interpreted in many different ways, and there is often no one "correct" interpretation.

If you are having trouble understanding a specific artwork, it might be helpful to try to learn more about the artist's background, the historical and cultural context in which the artwork was created, and the techniques and materials used to create the piece. You could also try looking at the artwork from different angles or distances, or try to imagine what the artist might have been thinking or feeling while creating the piece.

It is also important to remember that it is okay to not fully understand or relate to every piece of art that you encounter. Art can be a very personal and subjective experience, and it is perfectly normal to have different reactions to different works.

Explanation:

Answer:

you didnt list the options

Answer:

C) volcanic eruptions

Explanation:

Edge

♡♡Hope I helped!!! :)♡♡

You're looking for the 15th percentile of a normal distribution with µ = 242 and σ = 13, which is to say you want to find x * such that

P(X ≤ x *) = 0.15

Transform the wait-time random variable X to Z, which follows the standard normal distribution with mean 0 and s.d. 1 :

Z = (X - µ) / σ   →   X = µ + σ Z = 242 + 13 Z

Now,

P(X ≤ x *) = P(242 + 13 Z ≤ x *) = P(Z ≤ (x * - 242)/13) = 0.15

Use a calculator (something with an inverse CDF function) or Z-table to look up the z-score, z = (x * - 242)/13, associated with a probability of 0.15. You would find that

z = (x * - 242)/13 ≈ -1.03643

Solve for x * :

x * ≈ 242 + 13 (-1.03643) ≈ 228.526 ≈ 229

Answer: B)  A pickup truck

Explanation:

Reference groups enable comparison because they are sort of like role models to people because people use them to evaluate their lives and certain choices they make. As a result, marketers compare people to these groups and target these groups to be able to sell products so that their influence will lead others to buy as well.

Pickup truck reference groups are very strong and can influence what sorts of trucks are considered great quality. This is mostly down to the fact that producing pickup trucks is a bit of a concentrated market with few major players so the endorsement of pickup truck reference groups of a pickup, is a significant thing.  

Answer:

1+1=2

Explanation:

This a addition in math

Hope it helps you

Answer:

This is a really tough question, but I'll try my best!

First, let's understand the 1

1 (one, also called unit, and unity) is a number and a numerical digit used to represent that number in numerals. It represents a single entity, the unit of counting or measurement. For example, a line segment of unit length is a line segment of length 1. In conventions of sign where zero is considered neither positive nor negative, 1 is the first and smallest positive integer.[1] It is also sometimes considered the first of the infinite sequence of natural numbers, followed by 2, although by other definitions 1 is the second natural number, following 0.  The fundamental mathematical property of 1 is to be a multiplicative identity,[2] meaning that any number multiplied by 1 returns that number. Most if not all properties of 1 can be deduced from this. In advanced mathematics, a multiplicative identity is often denoted 1, even if it is not a number. 1 is by convention not considered a prime number; although universal today, this was a matter of some controversy until the mid-20th century.

Now let's understand the mathematics & properties of 1

Mathematics:

Mathematically, 1 is:

in arithmetic (algebra) and calculus, the natural number that follows 0 and the multiplicative identity element of the integers, real numbers and complex numbers;

more generally, in algebra, the multiplicative identity (also called unity), usually of a group or a ring.

Formalizations of the natural numbers have their own representations of 1. In the Peano axioms, 1 is the successor of 0. In Principia Mathematica, it is defined as the set of all singletons (sets with one element), and in the Von Neumann cardinal assignment of natural numbers, it is defined as the set {0}.

In a multiplicative group or monoid, the identity element is sometimes denoted 1, but e[2] (from the German Einheit, "unity") is also traditional. However, 1 is especially common for the multiplicative identity of a ring, i.e., when an addition and 0 are also present. When such a ring has characteristic n not equal to 0, the element called 1 has the property that n1 = 1n = 0 (where this 0 is the additive identity of the ring). Important examples are finite fields.

By definition, 1 is the magnitude, absolute value, or norm of a unit complex number, unit vector, and a unit matrix (more usually called an identity matrix). Note that the term unit matrix is sometimes used to mean something quite different.

By definition, 1 is the probability of an event that is absolutely or almost certain to occur.

In category theory, 1 is sometimes used to denote the terminal object of a category.

In number theory, 1 is the value of Legendre's constant, which was introduced in 1808 by Adrien-Marie Legendre in expressing the asymptotic behavior of the prime-counting function. Legendre's constant was originally conjectured to be approximately 1.08366, but was proven to equal exactly 1 in 1899.

Properties:

Tallying is often referred to as "base 1", since only one mark – the tally itself – is needed. This is more formally referred to as a unary numeral system. Unlike base 2 or base 10, this is not a positional notation.

Since the base 1 exponential function (1x) always equals 1, its inverse does not exist (which would be called the logarithm base 1 if it did exist).

There are two ways to write the real number 1 as a recurring decimal: as 1.000..., and as 0.999.... 1 is the first figurate number of every kind, such as triangular number, pentagonal number and centered hexagonal number, to name just a few.

In many mathematical and engineering problems, numeric values are typically normalized to fall within the unit interval from 0 to 1, where 1 usually represents the maximum possible value in the range of parameters. Likewise, vectors are often normalized into unit vectors (i.e., vectors of magnitude one), because these often have more desirable properties. Functions, too, are often normalized by the condition that they have integral one, maximum value one, or square integral one, depending on the application.

Because of the multiplicative identity, if f(x) is a multiplicative function, then f(1) must be equal to 1.

It is also the first and second number in the Fibonacci sequence (0 being the zeroth) and is the first number in many other mathematical sequences.

The definition of a field requires that 1 must not be equal to 0. Thus, there are no fields of characteristic 1. Nevertheless, abstract algebra can consider the field with one element, which is not a singleton and is not a set at all.

1 is the most common leading digit in many sets of data, a consequence of Benford's law.

1 is the only known Tamagawa number for a simply connected algebraic group over a number field.

Thus, I can conclude that 1 + 1 is indeed equal to 2

Answer:

The answer is C.

Answer:

4 I would say is the answer

Answer:

an uplift-weathering hypothesis is a “proposal that chemical weathering is an active driver of climate change, rather than just a negative feedback that moderates climate". uplift-weathering hypothesis both discuss how chemical weathering is a negative feedback that moderates climate; however, the uplift hypothesis tries to say that chemical weathering is the active driver for climate change and not just a negative feedback

Explanation:

Answer:

an uplift-weathering hypothesis is a “proposal that chemical weathering is an active driver of climate change, rather than just a negative feedback that moderates climate". uplift-weathering hypothesis both discuss how chemical weathering is a negative feedback that moderates climate; however, the uplift hypothesis tries to say that chemical weathering is the active driver for climate change and not just a negative feedback

Explanation:

Answer:

I don't mind reviewing it and helping you with your grammar!

Explanation:

particularly susceptible to robotic influence

If a single price monopolist is replaced by a perfectly competitive market, the deadweight loss will decrease.

To learn more about market, refer:

https://brainly.com/question/22202239

#SPJ1

Answer:

neap tides happens when the sun and moon are at right angles to each other.

Explanation:

The tide with the least difference between consecutive low and high tides.

Neap tides, which also occur twice a month, In both cases, the gravitational pull of the sun is "added" to the gravitational pull of the moon on Earth, causing the oceans to bulge a bit more than usual.

The following table gives the velocity of a vehicle at different moments in time. The average acceleration for the vehicle t = 3 to t = 10 is 5 m/s².

The rate of change in velocity, or the change in velocity per unit of time, is known as average acceleration. The square of the distance over time is used to measure acceleration.

Average is read as a symbol with a bar over it, so a bar represents average acceleration.

Avg. acceleration = change in velocity V(t)-Vh) /change in time (t2 - t1)

Avg. acceleration = V (10) - v (3) / t2- t1

Avg. acceleration: 40-5 / 10-6

Avg acceleration 35 / 7

Avg. acceleration 5 m/s²

Therefore, the average acceleration for the vehicle is 5 m/s².

To learn more about average acceleration, refer to the link:

https://brainly.com/question/17352997

#SPJ1

Answer:

yes I think brain should be removed because our sense organs are

Answer:

1. Farm-to-Table: The farm-to-table movement has become increasingly popular in recent years and has had a major impact on the way food is served in restaurants. This movement focuses on using locally-sourced, fresh and seasonal ingredients in the preparation of dishes. By serving food that is sourced and grown close to the restaurant, more attention can be given to the quality and flavor of the ingredients. This movement has also pushed restaurants to be more mindful of the environmental impact of their ingredients and has encouraged them to partner with local farms and producers.

2. Molecular Gastronomy: Molecular gastronomy is a relatively new culinary movement that has gained popularity in the past few years. This movement focuses on experimenting with ingredients and cooking techniques in order to create new and interesting textures, flavors, and presentations. This movement has allowed chefs to take a scientific approach to cooking, finding ways to transform and manipulate ingredients in order to create dishes that are visually appealing and unique. By using modern cooking techniques such as sous vide, spherification, and foams, chefs have been able to create dishes that are both visually stunning and delicious.

Note that Jim Crow laws were passed in the late 1800s, after the Reconstruction era following the American Civil War.

These laws were state and local laws that enforced racial segregation and discrimination against black Americans, and they were in place for about 100 years, until the mid-1960s.

The Jim Crow era ended with the Civil Rights Movement and the passage of the Civil Rights Act of 1964 and the Voting Rights Act of 1965, which made discrimination on the basis of race, color, religion, sex, or national origin illegal.

Thomas Dartmouth ("Daddy") Rice, an itinerant white performer, is supposed to have created the role of Jim Crow around 1830. Rice was not the first performer to assume rags and blacken his face with burnt cork in order to give a sarcastic exaggerated copy of an African American, but he was the most renowned, and his popularity helped create minstrelsy as a popular theatrical tradition that thrived from around 1850 to 1870.

By the late 1830s, "Jim Crow" had become a derogatory word for African Americans, but it was perhaps not as widespread or as hostilely scornful as some other terms.

Learn more about Jim Crow:
https://brainly.com/question/21634190
#SPJ1

Answer:

Explanation:

it lasted form 1895 to 1964

Answer:

Learning Outcomes. Create a frequency table, bar graph, pareto chart, pictogram, or a pie chart to represent a data set; Identify features of ineffective

Explanation:

Learning Outcomes. Create a frequency table, bar graph, pareto chart, pictogram, or a pie chart to represent a data set; Identify features of ineffective

The tools involved in learning outcomes may significantly include a frequency table, bar graph, Pareto chart, pictogram, or pie chart in order to represent a data set and recognize features.

An example of data that uses these tools may include the number of boys and girls in the school with respect to their categories, i.e. unreserved, other backward classes, scheduled castes, scheduled tribes, etc.

According to the context of this question, tools like bar graphs, pie charts, pictograms, etc. are constructed on the basis of the collection of data and information with respect to the given categories. The result in the future can be improved with the help of utilizing several other technologies along with computer programs.

Therefore, the tools involved in learning outcomes may significantly include a frequency table, bar graph, Pareto chart, pictogram, or pie chart in order to represent a data set and recognize features.

To learn more about Learning outcomes, refer to the link:

https://brainly.com/question/20461060

#SPJ2

If the group conducts a study to investigate its belief, the hypotheses that should be tested is this:

A testable hypothesis is a form of speculation that can be evaluated so that it can be proven as true or false. Given the question above, we can see that there is speculation that the real average flight time between the two cities is greater than 38 minutes. Thus, we now have a null and alternate hypothesis.

While the null hypothesis would assume the equals sign and is the main claim to be tested, the alternate hypothesis is the true claim when the null is not true. This is accurately represented by the values:

Learn more about the null and alternate hypothesis here:

https://brainly.com/question/13045159

#SPJ1

The pressure potential of a plant cell is a measure of the osmotic pressure inside the cell. It is determined by the concentration of solutes inside the cell compared to the concentration of solutes in the surrounding solution.

In this case, the plant cell contains 0.4 M glucose and is placed in a 0.5 M glucose solution. This means that there is a higher concentration of glucose outside the cell than inside the cell. As a result, water will tend to move from the surrounding solution into the cell, increasing the pressure inside the cell.

To calculate the pressure potential of the plant cell, you can use the following formula:

Pressure potential = (-i) x R x T x ln(Ci/Co)

where:

- i is the van't Hoff factor, which is the number of particles produced by the dissociation of the solute in solution. For glucose, the van't Hoff factor is 1.

- R is the universal gas constant, which is 8.314 J/mol*K.

- T is the temperature in Kelvin. At 25°C, the temperature is 298 K.

- Ci is the concentration of solute inside the cell (0.4 M in this case).

- Co is the concentration of solute in the surrounding solution (0.5 M in this case).

Plugging in the values, we get:

Pressure potential = (-1) x 8.314 J/mol*K x 298 K x ln(0.4 M/0.5 M)

= -5.6 J/mol

The pressure potential of the plant cell is -5.6 J/mol. This negative value indicates that the pressure inside the cell is lower than the pressure outside the cell, which is due to the higher concentration of solute outside the cell. This osmotic pressure difference drives water to move into the cell, increasing the pressure inside the cell.

Therefore, the correct answer is as given above

learn more about pressure potential: https://brainly.com/question/10970371

#SPJ1

Answer:

Vanuatu because I searched it up and it says its the leading way in the reduction of plastic consumption are the people of Vanuatu

Answer:

d. the actual dimensions.

Explanation:

In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.

Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.

Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.

Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.

In dimension drawings, the dimensions written on the drawing are the actual dimensions and the drawings are then made using a scale to reduce the drawing in same proportion.